Condition: used, Year of construction: 2008, Functionality: fully functional, The machine is in good general condition and is used daily. It can therefore be viewed with the power on. Please let me know if you have any questions. Cgjbev Id Szo Ezt E Rjt

Condition: used, Year of construction: 1998, table length 730 mm Cgeb Eztevw D Dve E Ret table width 630 mm ampere ? ( 70 ) A total power requirement ? kW weight of the machine ca. ? t dimensions of the machine ca. ? m

Condition: refurbished (used), Year of construction: 2003, Functionality: fully functional, AGIECUT Excellence 2 Year of manufacture 2003 Travel paths (X/Y/Z): 350 x 250 x 256 mm Travel paths (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface: 0.1 µm Ra Max. cutting rate in cylindrical cut: 300 mm²/min Available wire diameters 0.10 - 0.33 mm Incl. AGIE universal clamping frame Incl. AGIE JOGGER handbox Incl. console with 4x USB connection Incl. AGIE setup 3D Cgsb Ezt Ejvx Thme Rjt The machine was cleaned, overhauled and thoroughly tested by our technicians. We are also happy to offer you commissioning and training.

Condition: good (used), Year of construction: 2019, Functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, Toolmaking dissolved through company takeover Cob Ejt Stwwjzt E Rjgt

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, TECHNICAL DETAILS X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 450 mm XYZ positioning resolution: 0.001 mm XYZ measuring resolution: 0.0005 mm Spindle-to-table distance: 150 - 600 mm Collision protection: X, Y, Z Axis speed: 0 to 900 mm/min Max. workpiece size (L × W × H): 1,000 × 700 × 370 mm Max. workpiece weight: 1,000 kg Max. electrode weight: 100 kg Clamping table dimensions: 700 × 500 mm Number of T-slots: 4 Dielectric system Filters: 6 paper filters Dielectric volume: 500 l Heat exchanger: Standard Filter change during machining: Standard Filling pump flow rate: 200 l/min Flushing Flushing via electrode: 1 × Flushing through the workpiece: 1 × Lateral rinsing: 2 × Extraction: 1 × Generator Max. machining current: 64 A Power consumption: 5 kVA Best achievable surface finish: CH 12 / Ra 0.4 µm Polishing option: CH 0 / Ra 0.1 µm Suitable technologies for: Copper / steel, graphite / steel, copper-tungsten / hard metal MACHINE DETAILS Machine dimensions (L × W × H): 2,300 × 1,570 × 2,900 mm Cgob Eov Tp Edozt E Rot Transport height: 2,370 mm Total weight (including reservoir): 3,600 kg EQUIPMENT - Linear glass scales on all axes - Collision protection on all axes - Standard heat exchanger and filter system - Various rinsing options with extraction - Technology compatibility for copper, graphite, and tungsten carbide - Optional polishing function with 0.1 µm roughness

Condition: excellent (used), Year of construction: 2005, operating hours: 27,000 h, Functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, net weight: 2,500 kg, Equipment: documentation/manual, Machine in excellent condition. Machine already cleaned. Sold as is or revised on request. Machine visible in our premises in Semsales in Switzerland. Cgeb Eztov Im R To E Rot

Condition: used, Year of construction: 1994, table length 750 mm table width 550 mm ampere 60 A Cgeb Eevxwygjzt E Rot Control Makino MGE20 x-travel 600 mm y-travel 400 mm z-travel 250 mm workpiece weight 450 kg tool change unit 8 weight of the machine ca. 5,00 t dimensions of the machine ca. 3,00 x 3,50 x H3,00 m Die-sinking machine with control MAKINO MGE20

Year of construction: 2000, Condition: used, ampere 29,5 protection P 31 fabric-no. 812122 frequency 50 Hz weight 300 kg Cob Esvu Hk Hezt E Rjgt

Condition: like new (used), Year: 2023 Machine travels: 800 x 450 x 640 x 360mm (X * Y * Z * W) Cjbjvgd Rze Ezt E Rogt Machine Dimension: 1910 x 1990 x 2240mm (2600mm Max) (W x D x H) Machine Weight: 1700Kg Max Weight for workpiece: 500Kg 2 Axis indexer with 3 jaw chuck Usable Electrode Diameter: ø 0.1 ~ ø 6.0mm Usable Electrode Length: 200 ~ 600mm, Drilling depth : 360mm Maximum Power: 3ø 415V 50㎐(Changeable) Max Allowable Current: 30A Rated Power Capacity: 5KVA Pneumatic Pressure Required: 5 bar Self-contained water system with filtration and deionisation system with sensor CNC programmable, from DXF or CNC auto hole patterns for PCD, Rows, Square, or GM code Auto routines for, set up, hole finding, simple programming

Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: P0050I553, workpiece weight (max.): 500 kg, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 180 mm, No reserve price - guaranteed sale at the highest bid! Submitting a bid obliges you to pick up the item on time by March 31, 2025! TECHNICAL DETAILS Max. workpiece weight: 500 kg Travel paths X-axis: 320 mm Y-axis: 220 mm U-axis: 120 mm V-axis: 120 mm Z-axis: 180 mm Rapid traverse X-axis: 900 mm/min Y-axis: 900 mm/min U-axis: 450 mm/min V-axis: 450 mm/min Z-axis: 900 mm/min MACHINE DETAILS Machine weight: 1.2 t Connected load: 13 kVA EQUIPMENT - Water bath machine Csb Esv Iazljzt E Rogt - Automatic wire feeder - Many spare parts and wear parts

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 680221, workpiece weight (max.): 1,000 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 250 mm, TECHNICAL DETAILS X-axis travel: 400 mm Y-axis travel: 300 mm Z-axis travel: 250 mm U-axis travel: ± 30 mm V-axis travel: ± 30 mm Taper pitch/height: ±15° / 110 mm Working area Table dimensions: 820 × 610 mm Max. workpiece size: 980 × 730 × 250 mm Max. workpiece weight: 1,000 kg Tank volume: 250 l Wire EDM system Wire EDM diameter: 0.25 mm Programmable wire tension: 0.3 to 3 daN Automatic wire threading for wire diameters: 0.10 / 0.20 / 0.25 / 0.30 mm Dielectric Paper filter: 2 cartridges Dielectric temperature: ± 1 °C Volume of ion exchange resins: 20 l Max. injection pressure: 4-stage programmable Tank volume: 1,200 l Cobov Tp Ape Ezt E Rjgt MACHINE DETAILS Dimensions (W × D × H): 1,950 × 2,550 × 2,000 mm Weight without dielectric: 3,250 kg Input voltage: 380 / 400 V Total installed power: 10 kVA Surface roughness: 0.28 µm EQUIPMENT - Linear scales on all axes - Closed wireless diamond guides with zero backlash - Programmable injection pressure with 4 stages - Windows NT-based control with PC keyboard and touchscreen

Condition: used, CUT 200, year 2011. Fully functional. Cgjb Ezt Eev Ig Aio Rst Available from the end of March.

Condition: like new (used), travel distance X-axis: 400 mm, travel distance Y-axis: 320 mm, overall weight: 700 kg, drilling depth: 300 mm, drill diameter: 3 mm, Equipment: documentation/manual, Any accessories can be negotiated on site Cob Eztsv H Rqho E Regt

Condition: used, Year of construction: 1989, serial number L169 output 6 kw ja seperat Cgsb Ejvu Hl Rezt E Ret digital readout ja Wizard Puls50 Kühlwasseraufbereitungsei

Condition: used, Year of construction: 2013, Max. Workpiece Dimensions - 960 x 670 x 245 mm X-Y-Z Axis Travel - 500 × 350 × 250 mm Cob Eswbp R Uszt E Rsgt Taper Angle (at 120 mm thickness) - ±15° Wire Diameter - Ø 0.15 – Ø 0.3 mm Machine Weight (incl. Power Supply) - 2,900 kg Machine Dimensions - 2,300 × 2,950 × 2,040 mm (with accessories) Distance from Floor to Table Top - 930 mm Max. Wire Feed Speed - 420 mm/sec Wire Tension - 3 – 23 N Air Flow Requirement - 0.5 MPa, 30 NL/min Total Power Input 3 phase - 50/60 Hz, 11 kVA Installation Space (W×D) - 3,000 × 3,300 mm Wire Bobbin Weight - 8 kg Machining Method - Flushing / Submerged Max. Workpiece Weight - 850 kg U-V Axis Travel - 80 × 80 mm Work Tank Dimensions (W×D) - 990 × 750 mm

Condition: good (used), Year of construction: 2005, Functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, No reserve price - guaranteed sale at the highest bid! Submitting a bid obliges you to pick up the item on time by March 31, 2025! TECHNICAL DETAILS X-axis: 400 mm Y-axis: 350 mm Cob Ezsv Iayzst E Regt Z-axis: 350 mm Tool changer: 24-way electrode changer Year of manufacture of electrode changer: 2017 Cooling unit Manufacturer: RIEDEL Year of manufacture: 2016 Model: WKS 51.2-M5... Area of application: Air conditioning of the CNC die-sinking EDM system

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 194604, workpiece weight (max.): 800 kg, travel distance X-axis: 628 mm, travel distance Y-axis: 398 mm, travel distance Z-axis: 162 mm, TECHNICAL DETAILS X-axis travel: 628 mm Y-axis travel: 398 mm Z-axis travel: 162 mm U-axis travel: ± 48 mm V-axis travel: ± 48 mm Cutting speed: max. 711 mm/h Working area Workpiece size (W × D × H): 1,350 × 688 × 361 mm Max. workpiece weight: 800 kg Cone pitch/height: ± 30° / 67 mm Axis measurement: linear glass measuring rod Wire EDM system Wire guides: 0.10 mm and 0.25 mm Permissible coil weights: 4 to 8 kg Dielectric Number of filter cartridges: 16 Units Tank volume: 1,003 l MACHINE DETAILS Weight (with dielectric): 5,200 kg Input voltage: 380/400 V (three-phase alternating current) Power consumption: total: 12 kVA Installation dimensions: approx. 4.3 x 1.3 m EQUIPMENT - Linear scales on all axes Cgjbjv Tpule Ezt E Rot - Collision protection on the U, V, and Z axes - Automatic wire threading and rethreading - CAM-CT for path programming - CT-EXPERT for generator optimization - PROFIL-EXPERT for geometry-dependent cutting strategies - DIN-compliant wire spool holder

Condition: excellent (used), Year of construction: 2011, Control PC-NC Dialog Travel paths X/Y/Z: 1000/1510/700 mm Cjb Ezsvllwyst E Rsgt C-axis 30-way electrode changer Hirschmann clamping system Support surface WxD 1140/1640 mm Load capacity 7500 kg Filter system Fire extinguishing system

Condition: like new (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: T0374, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, total height: 1,990 mm, total length: 2,310 mm, total width: 2,020 mm, Equipment: cooling unit, documentation/manual, Machine in very good condition, still connected to the power supply, fully functional and last serviced by Sodick last autumn. Csb Ezt Esvwbdae Rjgt Any accessories can be discussed on site

Condition: used, Year of construction: 2007, Diesinking / EDM Travel distance X: 350 mm Travel distanceY :250 mm Travel distance z: 350 mm table size X: 600 mm table size Y: 450 mm max. workpiece size X: 650 mm max. workpiece size Y: 420 mm max. workpiece size Z: 250 mm max. workpiece weight: 400 kg cooler Cgebovt Syke Ezt E Ret

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 124322, workpiece weight (max.): 500 kg, travel distance X-axis: 318 mm, travel distance Y-axis: 218 mm, travel distance Z-axis: 114 mm, TECHNICAL DETAILS X-axis travel: 318 mm Y-axis travel: 218 mm Z-axis travel: 114 mm U-axis travel: ± 48 mm V-axis travel: ± 48 mm Control system: PC-based, 14" color monitor, MS-DOS Tap pitch/height: ±30° / 65 mm Working area Type: Tray with swing door Max. workpiece dimensions (W × D × H): 1,130 × 510 × 260 mm Door width: 1,010 mm Max. workpiece weight: 500 kg Table dimensions (W × D): 560 × 440 mm Distance from floor to table: 1,050 mm Volume of the Dielectric capacity: 240 l Dielectric level control: Automatic Wire EDM system Wire diameter: 0.10 – 0.25 mm Wire guide type: Diamond-enclosed guide, zero backlash Programmable wire unwinding speed: 0.2 to 15 m/min Programmable wire tension: 0.3 to 3 daN Permissible spool weight and type (according to DIN): 1.6 kg Permissible spool weight and type (according to JIS): 3 kg Used wire recycling: Wire shredding at the rear Automatic threading for wire diameters: 0.050 to 0.300 mm Automatic rethreading for wire diameters: 0.070 to 0.300 mm Minimum threading hole diameter: 0.300 mm for 0.250 mm wire Dielectric Type: Deionized Water Total dielectric volume: 900 l Dielectric temperature: ±0.5 °C Cartridge filters: 16 Deionization resin volume: 30 l Deionization control: Automatic Cob Eztov Tpnro E Rogt Number of deionization bottles: 3 Injection pressure range: 0 – 20 bar Number of programmable pressure levels: 16 Generator Max. processing speed (material: steel, wire: SW30X): 300 mm²/min Min. surface roughness (material: steel, height: 20 mm): 0.12 µm Ra Min. surface roughness (material: carbide, height: 20 mm): 0.1 µm Ra Available technologies: Steel, carbide, copper, graphite, aluminum, PCD, copper-tungsten MACHINE DETAILS Machine dimensions (L × W × H): 3,690 × 2,520 × 2,290 mm Weight (without dielectric): 4,400 kg Input voltage: 380/400 V Power consumption: 12 kVA

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 448 mm, travel distance Y-axis: 318 mm, travel distance Z-axis: 158 mm, TECHNICAL DETAILS X-axis travel: 448 mm Y-axis travel: 318 mm Z-axis travel: 158 mm U-axis travel: ± 48 mm V-axis travel: ± 48 mm Workpiece height: max.: 360 mm Workpiece dimensions (W × D × H): 1,150 × 726 × 360 mm Workpiece weight: max.: 800 kg Wire EDM system Wire diameter: 0.10 – 0.25 mm Wire guide type: Diamond-enclosed guide, zero backlash Cgob Ezt Ejv Tn Udj Rjt Programmable wire unwinding speed: 0.2 to 15 m/min Programmable wire tension: 0.3 to 3 daN Permissible spool weight and type (according to DIN): 1.6 kg Permissible spool weight and type (according to JIS): 3 kg Used wire recovery: Wire shredding at the rear Automatic threading for wire diameters: 0.050 to 0.300 mm Automatic rethreading for wire diameters: 0.070 to 0.300 mm Minimum threading hole diameter: 0.300 mm for 0.250 mm wire Dielectric Type: Deionized water Total dielectric volume: 900 l Dielectric temperature: ±0.5 °C Cartridge filters: 16 Deionization resin filling volume: 30 l Deionization control: Automatic Number of deionization bottles: 3 Injection pressure range: 0 – 20 bar Number of programmable pressure levels: 16 Generator Max. Machining speed (material: steel, wire: SW30X): 300 mm²/min Min. surface roughness (material: steel, height: 20 mm): 0.12 µm Ra Min. surface roughness (material: carbide, height: 20 mm): 0.1 µm Ra Available technologies: steel, carbide, copper, graphite, aluminum, PCD, copper-tungsten MACHINE DETAILS Input voltage: 380/400 V Total connected load: 12 kVA EQUIPMENT - Linear scales on all axes - Collision protection in U, V, and Z - Wire break detection - Surface-optimized generator for longer tool life - Optimized filter technology for consistent process reliability

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 132019, workpiece weight (max.): 500 kg, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 160 mm, Machine overhauled in 2007 TECHNICAL DETAILS X-axis: 320 mm Y-axis: 220 mm Z-axis: 160 mm U-, V-axis: ± 48 mm Tap pitch/height: ±30° / 66 mm Cgeb Ezev Tn A Uot E Ret Travel speed: 1 – 900 mm/min Working area Tank dimensions (W × D × H): 1,000 × 490 × 260 mm Load capacity: max. workpiece weight: 500 kg Dielectric volume: 240 l Wire EDM system Wire EDM diameter (single wire): 0.33 – 0.05 mm Wire EDM diameter (double wire): 0.33 – 0.05 mm Automatic wire threading: 0.33 – 0.05 mm Automatic rethreading: 0.33 – 0.07 mm Min. threading hole: 0.3 mm (for 0.25 mm wire) Number of spools: 2 front, 1 rear Front spool weight: 1.6 – 8 kg Rear spool weight: 16 – 25 kg Taper: ± 30° Dielectric Filter type: 3 built-in paper cartridges Total filter area: 66 m² Tank volume: 800 l Numerical control Control type: PC-based CNC Screen: LCD 12.1" TFT touchscreen MACHINE DETAILS Dimensions (W × D × H): 2,320 × 2,310 × 2,320 mm Machine weight (without dielectric): 3,900 kg Connected load: 15 kVA EQUIPMENT - Microcut function for wire diameters of 0.02–0.03 mm - CT robot interface installed at the factory

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 723035, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 4,200 kg, TECHNICAL DETAILS X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Resolution: 0.0005 mm Distance from fixture to table: 230 - 730 mm Cob Eztsv Tnv Uo E Rsgt Working area Work tank type: Automatic front door with up/down movement Tank dimensions (W × D × H): 1,560 × 1,130 × 600 mm Dielectric height: 275 - 470 mm Workpiece weight: 4,200 kg Electrode weight: 350 kg Workpiece dimensions (W × D × H): 1,550 × 1,090 × 430 mm Dielectric system Filter system: 8 paper cartridges Tank volume: 1,835 l Machine current: 128 A Electrode changer: 7 slots Spindle mount: Erowa Software features Pilot Expert 3: Optimization and automatic monitoring of machining parameters Power Control Expert: Machining current, self-adapting to the electrode geometry Micro-Machining: Control of electrode wear for small-size applications SPAC: Short-circuit protection system Numerical control Polishing Ra 0.1 µm (CH0): Standard Contouring / M-functions / Machine self-diagnosis: Standard DNC1 and DNC3 communication interface: Standard Servo-controlled thermal stabilization: ±1° Program Expert 1.2: Automatic program generation and generator tuning on the control system Auto-restart: Standard

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 667007, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, controller model: Windows Pentium, TECHNICAL DETAILS X-axis: 600 mm Y-axis: 400 mm Z-axis: 450 mm Resolution: 0.0001 mm Tank size: 1,220 x 870 x 470 mm Cgjbev Tnm He Ezt E Rot Working area Table dimensions: 750 × 600 mm T-slot dimensions (number): 12 mm (5 pieces) Distance between table and fixture: 150 - 600 mm Electrode and workpiece Max. electrode weight: 100 kg Max. workpiece weight: 1,600 kg Max. workpiece dimensions (W × D × H): 1,200 × 850 × 400 mm Dielectric Filter type: 8 integrated paper cartridges Tank capacity: 820 l Dielectric level: 145 - 440 mm (programmable) Container type: Lowerable tank Surface roughness: 0.20 µm Ra MACHINE DETAILS Weight: 4,400 kg Operating voltage: 400 V Installation dimensions: approx. 3,720 x 5,100 x 3,000 mm