Condition: good (used), Year of construction: 2007, operating hours: 55,000 h, 1x used Arburg 570C 2000-800 Golden Edition Year of construction: 09/2007 Ma-No. 206432 Auger: 50mm Blow-off valve: 2x Core pull: 1x Handling interface Host computer interface Printer interface Interface for inking unit Connection for conveyor belt via 5-pin plug Dksb Et Eowgb Ebsfnol Connection for selection unit The machine is sold without any other visible peripherals / tools!

Condition: excellent (used), Year of construction: 2000, operating hours: 46,000 h, Functionality: fully functional, machine/vehicle number: 180316, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, Fully functional plastic injection molding machine with associated documentation and diskettes. The machine operated in clean production. Deb Eov N D Rast Efnskl The machine was injection molded with LDPE material, so the tip and screw are in first-class condition. Every 2 years, the pressures were checked and confirmed by an Arburg authorized service.

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 4450000410, clamping force: 500 kN, screw diameter: 32 mm, column diameter: 45 mm, displacement volume: 95 cm³, injection pressure: 1,076 bar, injection weight: 69 g, mold height (min.): 250 mm, overall weight: 2,430 kg, power: 16.8 kW (22.84 HP), Equipment: documentation/manual, Dr.Boy LSR (silicone) injection molding machine, built in 2024, is being sold unused due to project cancellation. Equipment Evacuation Interface for brush control Interface for handling device (EUROMAP 67) Djbjv R Ia Ie Et Efnjkl

Year of construction: 2008, Condition: ready for operation (used), Clamping force: 800kN, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 580mm/590mm, opening stroke: 450mm, min. mold installation height: 250mm, max. mold weight: 650kg, ejector stroke: 125mm, ejector force: 45kN. Screw diameter: 35mm, shot weight: 168g, dosing volume: 185cm³, injection pressure: 1800bar, plasticizing capacity: 15g/s. Control system: NC5, robot interface: Euromap 67, machine weight: approx. 4100kg, machine dimensions X/Y/Z: 4100mm/1400mm/1900mm, operating hours: approx. 73500h. Documentation available. On-site inspection is possible. Djbswgczkj Et Efnekl

Condition: good (used), Year of construction: 2013, clamping force: 80 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,065 bar, installation height: 250 mm, total length: 4,200 mm, total width: 1,400 mm, total height: 2,000 mm, overall weight: 5,200 kg, Core features 2 Dkeb Et Efewf I E Sjnel

Condition: ready for operation (used), Year of construction: 2001, General Data Machine weight 16000 kg Clamping Unit Clamping force 3200 kN Additional Equipment International Dimension: 3200H-1636 This FERROMATIK K-TEC 320 S was manufactured in 2001. A robust hydraulic injection moulding machine, it's ideal for precision plastic processing. Consider the opportunity to buy this FERROMATIK K-TEC 320 S hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding Dkeb Et Ejwbwz Ijfnjl

Condition: excellent (used), Year of construction: 2018, operating hours: 20,500 h, Functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit SECHS ACHS Roboter Hersteller: ARBURG Typ: 570S2200-400/170 Baujahr: 2018 Schließkraft: 220 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 350 mm Öffnungsweg: 1.000 mm Schnecken DN 1: 40 mm Max. Hubvolumen: 201 cm³ Spritzteilgewicht: 184 g/PS Dob Etou E Id Ts Efnokl Schnecken DN 2: 25 mm Hubvolumen: 59 cm³ Spritzteilgewicht: 54 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit Verlängerte Holme Vorverlegter Zylinder 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2018 Förderband Schutzzaun

Year of construction: 1984, Condition: used, Plastic injection molding machine allrounder 170-90-200 horizontal and vertical swiveling Clamping force 200 KN Injection force 91 KN Djb Etommbz Hs Efnekl Total power 10,9 kw

Year of construction: 2006, Condition: excellent (used), Spritz Clinder Bareire Deb Eod N Ak Dot Efnskl Bj ca2006 Long 130 cm Scrow 35 mm

Year of construction: 2008, Condition: ready for operation (used), Clamping force: 1600kN, opening stroke: 500mm, mold installation height min./max.: 275mm/585mm, max. platen distance: 1085mm, platen dimensions X/Y: 770mm/770mm, tie bar dimensions X/Y: 520mm/520mm, ejector stroke: 160mm. Screw diameter: 40mm, screw stroke: 203mm, injection weight: 160g. Documentation available. On-site inspection is possible. Djbowgczwo Et Efnekl

Condition: excellent (used), Year of construction: 2014, Engel Duo 11050/800 Baujahr: 2014 Dsb Et Efjwc Edysnjkl Screw dia: 135mm Injection volume: 8158cm3 Tie bar distance: 1170x 1000mm (HxV) Viper 40 robot

Year of construction: 2006, Condition: ready for operation (used), Injection Unit Screw diameter 55 mm Clamping Unit Opening stroke 700 mm Distance between bars 560 x 560 mm Additional Equipment Core Valve: 1 Air Valves: 3 EU 12 for Robot Connection: Yes Dkobeupm S Ns Et Efnol This Krauss Maffei 200-1000 C2 was manufactured in 2006. A hydraulic injection moulding machine featuring a tie bar distance of 560 x 560 mm and an opening stroke of 700 mm. It includes a screw diameter of 55 mm and is equipped with 1 core valve, 3 air valves, and an EU 12 connector for robot integration. A solid choice for expanding production capabilities. For more information about this hydraulic injection moulding machine, please reach out to us. Application Types Injection Moulding

Condition: used, Year of construction: 2004, Functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine Hersteller: DEMAG Typ: Concept 350/710-2300 Dkobswa Trgo Et Efnel Baujahr: 2004 Schließkraft 350 Tonnen Holmabsta 630 x 630 mm Einbauhöhe min.: 330 mm Öffnungsweg: 675 mm Schnecken DN: 55 mm Max. Hubvolumen: 890 cm³ Spritzteilgewicht: 800 g/PS Steuerung: NC4 Ausstattung: Ausstattung: Roboter, Hersteller: WITTMANN 2 St. Kernzüge Hochverschleißfeste Spritzeinheit Verfügbar ab 16. KW/2025

Condition: reconditioned (used), Year of construction: 2004, operating hours: 35,000 h, Functionality: fully functional, clamping force: 2,600 kN, screw diameter: 60 mm, Engel Victory 1800/260 Tech Engel Horizontal Injection Molding Machine, 260 tons of closing force. Servo motor. CC100 control. Only 35,000 operating hours. Extras: Engel ERC 53/1-E robot + safety grille. 60mm intermediate plate. The injection molding machine is delivered reconditioned by our expert technical team and in optimal working condition. We can offer our clients a commissioning service at their facilities, guaranteeing its operation. Technical Details INJECTION PRESSURE 2361 (increased) PLATE DIMENSIONS 1100x1000mm SCREW 60mm Dsbowdvm Us Et Efnokl INJECTION VOLUME 764cm3 CLAMPING POWER 2600kN OPENING STROKE 908mm WORKING HOURS 35,000 MINIMUM MOLD THICKNESS min 400/ max 900 YEAR OF MANUFACTURE 2004 MAXIMUM DISTANCE BETWEEN PLATES 1300mm

Condition: good (used), Year of construction: 1990, Netstal 1000/445HP Deb Et Efegi D Thjnjkl Closing 100 TO Scrow 40mm Stroke volume 44x44 Year 1990

Year of construction: 2000, Condition: ready for operation (used), Clamping force: 500kN, platen dimensions X/Y: 540mm/540mm, tie bar spacing: 355mm/355mm, opening stroke: 400mm, min. mold installation height: 210mm, clearance: 610mm, ejector stroke: 125mm. Screw diameter: 30mm, L-D ratio: 20, stroke volume: 144.3cm³, injection weight: 128g, injection pressure: 1890bar. Machine dimensions X/Y/Z: approx. 3650mm/1150mm/1800mm, weight: approx. 2500kg, control: NC4, operating hours: approx. 41100h. Documentation available. On-site inspection is possible. Dob Etswgczde Efnskl

Condition: like new (used), Year of construction: 2022, Engel duo 17060/2000 injection molding machine Year of production -2022 Robot viper 60 - RC300 integrated Z= 4280 mm X= 1800 mm Y= 2600 mm B9Wbl2Xapk Injection system Screw diameter mm 135 Screw pitch mm 610 Maximum injection capacity cm³ 8731 Screw speed min⁻¹ 125 Screw torque Nm 14000 Maximum screw speed at reduced torque min⁻¹ 135 Reduced torque at max. speed Nm 12963 Reduced screw speed at max. torque min⁻¹ 112 Maximum screw torque at reduced speed Nm 15630 Regeneration efficiency (3-zone screw) g/s 222.9 Regeneration efficiency (barrier screw) g/s 279.2 Injection Injection efficiency cm³/s 1904 Injection volume cm3 8731 Injection weight g 7860 Injection pressure (regeneration) bar 1648 Injection pressure (maximum) bar 2000 Nozzle Nozzle stroke mm 1100 Nozzle pressure force kN 210 Material cylinder L/D ratio - 25 Heating zones (including nozzle) - 8 Heating power kWel 88.5 Closing system Closing force kN 20000 Minimum closing force kN 2000 Opening force (with pressure cushion) kN 1600 Force opening kN 614 Opening stroke mm 3000 Max. distance between platens mm 3800 Min. mould height mm 800 Max. mould height mm 1800 Spacing between tie bars (h x v) mm x mm 2000 x 1600 Size of mould plates (h x v) mm x mm 2700 x 2430 Max. mould weight (moving platen) kg 41330 Max. mould weight (stationary platen) kg 41330 Max. total mould weight kg 62000 Dry cycle stroke (Euromap 6) mm 1400 Dry cycle time (Euromap 6) s 5.5 Dkob Et Efjwc A T Sjnjl Ejector Ejector stroke mm 400 Ejector force kN 385 Drive Installed power of main motors kW 265 Capacity oil tank (injection unit) l 1600 Oil filter Max. cooling capacity (at 25°C) kWcool 43.2 Water consumption (at 25°C) m³/h 6.3

Year of construction: 2006, Condition: ready for operation (used), General Data Measurements width 2650 mm Measurements depth 9360 mm Measurements height 2430 mm Machine weight 43400Kg Injection Unit Dkeb Et Esupm Uqefnol Screw diameter 80 mm Clamping Unit Opening stroke 1150 mm Distance between bars 1000 x 930 mm Additional Equipment Core Valve: 1 Air Valves: 3 EU 12 for Robot Connection: Yes Attached you will find some drawings with fundament and platens. This Krauss Maffei 600 - 3500 C3 hydraulic injection moulding machine was manufactured in 2006. It features a tie bar distance of 1000 x 930 mm and an opening stroke of 1150 mm. Equipped with 1 core valve, 3 air valves, and a screw diameter of 80 mm, it also includes an EU 12 connection for robot integration. For more information about this hydraulic injection moulding machine, please reach out to us. Application Types Injection Moulding

Condition: used, Year of construction: 2005, Hersteller: KRAUSS MAFFEI Typ: KM300-1400C2 Baujahr: 2005 Schließkraft 300 Tonnen Holmabsta 630 x 630 mm Einbauhöhe min.: 330 mm Öffnungsweg: 820 mm Schnecken DN: 45 mm Max. Hubvolumen: 373 cm³ Spritzteilgewicht: 335 g/PS Steuerung: MC3+ Ausstattung: Deb Et Efjvzqhvsnekl 2 St. Kernzüge an BWAP Hochverschleißfeste Spritzeinheit Eine zweite zusätzliche Spritzeinheit DN 45 mm Innendruckmessung Kistler Verfügbar ab 16. KW/2025

Year of construction: 2007, Condition: ready for operation (used), Clamping force: 500kN, tie bar distance X/Y: 370mm/370mm, platen dimensions X/Y: 540mm/530mm, opening stroke: 400mm, min. mold height: 135mm, clearance: 535mm, ejector stroke: 125mm. Screw diameter: 30mm, injection volume: missing (please add), injection pressure: 1890bar, core pulls: 2. Machine dimensions X/Y/Z: approx. 3600mm/1200mm/1800mm, weight: approx. 2500kg, operating hours: 80300h. Documentation available. On-site inspection is possible. Dkeb Et Efewgczqonjl

Condition: like new (used), Year of construction: 2019, FANUC ROBOSHOT S100iA FANUC ROBOSHOT ALPHA S100IA Operating hours: 10,839 hours Year of manufacture: 2019 Dkobowcx Rtj Et Efnol 100 tons Tiebar spacing: 460 x 410 mm Installation height: 520-220 mm 40 mm 3-zone screw Injection speed: 330 mm/s Injection stroke: 144 mm Ejector stroke: 120 mm

Year of construction: 2014, operating hours: 59,121 h, Condition: ready for operation (used), Injection Unit Screw diameter 135 mm Stroke volume 8158 ccm Clamping Unit Opening stroke 1508 Mould height min 500 Mould height max 1008 Ejector stroke 300 Additional Equipment Robot V40 Access Platform Temperature Control Units (2 pieces each) Conveyor Belt Suction and Dosing Station by Koch This Engel Duo 11050/800 hydraulic injection moulding machine was manufactured in 2014. Consider the opportunity to buy this Engel Duo 11050/800 hydraulic injection moulding machine. Contact us for more information. Dkeb Ejwbla Eet Efnsl Application Types Injection Moulding

Condition: good (used), Year of construction: 2011, VC 750H/330V/220 COMBI Dksb Etov I Ul Ej Efnsl CC200 controll Clamping force: 220 t Screw diameter: 50 mm Screw dia 2: 35 mm Shot weight: 361 g Shot volume: 392 cm3 Type: Uni Drive: Hydraulic Possible to buy Wittmann 821 robot extra

Condition: ready for operation (used), Year of construction: 2017, operating hours: 21,445 h, Control Unit Brand FANUC Dkeb Et Esvxbpxsfnjl Injection Unit Screw diameter 32 mm Clamping Unit Clamping force 1250 KN Opening stroke 350 mm Size of mold platens 660 mm × 610 mm Additional Equipment Equipment: Robot Wittman W818 (2015) 8000 € extra This FANUC α-S100A was manufactured in 2017. It is an electrical injection moulding machine, ideal for precision plastic parts production. Consider the opportunity to buy this FANUC α-S100A electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Year of construction: 2010, operating hours: 32,497 h, Condition: ready for operation (used), General Data Machine weight 8800 kg Dkob Etewcht Rj Efnsl Additional Equipment 2 ejectors Vacuum pump This Kloeckner Desma 968.250 ZO was manufactured in 2010. A hydraulic injection moulding machine, it represents a reliable option for precision moulding tasks. Consider the opportunity to buy this Kloeckner Desma 968.250 ZO hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding