Condition: ready for operation (used), Year of construction: 2019, operating hours: 20,000 h, General Data Machine weight 6500 kg Control Unit Brand ENGEL Main Drive Spindle motor power 92 kW Injection Unit Screw diameter 60 mm Stroke volume 315 mm Injection pressure 2400 bar Screw speed 220 min-1 Nozzle pressure 2400 bar Clamping Unit Clamping force 6500 kN Opening stroke 1400 mm Distance between bars 1100x960 mm Mould height min 350 mm Mould height max 850 mm Size of mold platens 1510x1440 mm Ejector stroke 250 mm Ejector force for / back 95 kN Additional Equipment Oil Reservoir Capacity - Injection Unit: 500 l Maximum Cooling Power (32°C Water Inlet): 29.40 kWcool Water Consumption (32°C): 4.80 m3/h General Data Machine weight 6500 kg Control Unit Brand ENGEL Main Drive Spindle motor power 92 kW Injection Unit Screw diameter 60 mm Stroke volume 315 mm Injection pressure 2400 bar Screw speed 220 min-1 Nozzle pressure 2400 bar Clamping Unit Clamping force 6500 kN Opening stroke 1400 mm Distance between bars 1100x960 mm Mould height min 350 mm Mould height max 850 mm Size of mold platens 1510x1440 mm Ejector stroke 250 mm Ejector force for / back 95 kN Additional Equipment Oil Reservoir Capacity - Injection Unit: 500 l Maximum Cooling Power (32°C Water Inlet): 29.40 kWcool Water Consumption (32°C): 4.80 m3/h Delrswchw Aefqdlskl This Engel duo 2400/650 electrical injection moulding machine was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection capacity of 890 cm³. The clamping force reaches up to 6500 kN with a maximum mold weight of 11000 kg. Consider the opportunity to buy this Engel duo 2400/650 electrical injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: used, Year of construction: 2004, operating hours: 63,107 h, Functionality: fully functional, machine/vehicle number: 61004849, clamping force: 125 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, injection weight: 142 g, mold height (min.): 300 mm, overall weight: 6,000 kg, Equipment: documentation/manual, We are offering our Krauss Maffei KM125-390 C2 for sale. The machine has been replaced. Until the replacement, it was in continuous operation in our production facility. If you are interested in arranging a viewing, please contact us. We may require some lead time to reconnect the machine to the power supply. If you would like a viewing without the power supply, we are happy to arrange a short appointment. If you are interested, we can also send you a short video of the machine in operation. Dsljv Rbpvorfqdlskl

Condition: used, Year of construction: 2019, clamping force: 700 kN, screw diameter: 100 mm, displacement volume: 3,691 cm³, injection pressure: 1,780 bar, overall weight: 34,000 kg, Freight basis: ex-site Delivery time: by arrangement Dkjlowc D T Hsrfqdlol Payment terms: 100% before taking delivery of the machine, net

Condition: excellent (used), Year of construction: 2010, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: KRAUSS MAFFEI Typ: CX250-1000 Baujahr: 2010 Schließkraft 300 Tonnen Holmabsta 630 x 630 mm Einbauhöhe min.: 330 mm Öffnungsweg: 820 mm Schnecken DN: 50 mm Max. Hubvolumen: 432 cm³ Spritzteilgewicht: 393 g/PS Steuerung: MC5 Ausstattung: Roboter, Krauss Maffei, Typ: LRX100S 2 St. Kernzüge an BWAP Dkslrjwcb Nrefqdlel Hochverschleißfeste Spritzeinheit

Condition: used, Year of construction: 2008, Functionality: fully functional, clamping force: 1,000 kN, screw diameter: 35 mm, displacement volume: 156 cm³, injection pressure: 2,180 bar, injection weight: 139 g, With Robotsystem Dkelrswgc R Sjfqdlol

Condition: good (used), Year of construction: 2022, Functionality: unexamined, machine/vehicle number: 1A08052, clamping force: 3,430 kN, screw diameter: 60 mm, clearance between the columns: 810 mm, displacement volume: 763 cm³, injection pressure: 220 bar, mold height (min.): 300 mm, ejector force: 60,000 N, ejector stroke: 270 mm, plate length: 770 mm, plate width: 770 mm, plate height: 700 mm, total length: 8,070 mm, total width: 1,930 mm, total height: 2,400 mm, heating capacity: 27.5 kW (37.39 HP), pressure: 200 bar, power: 85.6 kW (116.38 HP), type of input current: three-phase, Electric injection molding machine from Japan's TOYO Machinery & Metal CO. LTD. Model: Si-350-6S/JH750E (L/D 24) PACK version The PACK series is dedicated especially to packaging production. Basic data: Installed heating power: 27.5kW Total installed power: 85.6kW Control: SYSTEM 800, interface Euromap 67, Euromap 73 Total external dimensions L/W/H: 8073mm x 1930mm x 2397mm Short-circuit force: 3430kN Spacing between columns: 810mm x 810mm Table dimensions: 1050mm x 1050mm Table opening stroke: 700mm Mold height min/max: 300mm / 770mm Ejector stroke: 150mm Ejector force: 60.0kN Auger diameter: 60mm Injection speed: 300mm/s Injection pressure: 220MPa Compression pressure: 200MPa Theoretical injection volume: 763cm3 Injection: 848cm3/s Dslrotwcdfsfqdljkl PS injection capacity: 210kg/h Screw speed: 0-350rpm Injection stroke: 270mm Nozzle clamping force: 39.0kN

Condition: good (used), Year of construction: 2004, 570 C 2200 - 675 Thermoplastic cylinder cpl. 55 mm highly wear-resistant Technology level 2 servo-controlled with 2 control pumps Thermoplastic processing Open nozzle 55 mm Nozzle tip radius 35 Heating tape for open nozzle Heating tape for extended nozzle tip Nozzle tip Clamping plate set 570 central Ø 125 mm Connection for blow-out device 1 Selector unit incl. connection Core pull 1, simultaneous movement Holding pressure manually adjustable Power-operated safety slide Robot system interface (to EUROMAP 12), 32-pin ARBURG master computer interface Power socket vert. 1 CEE, 1 additional Schuko Djljwgb E Iorfqdlokl Cutting unit Temperature control unit WKZ 20 mA Interface printer serial V24 Parallel connection for heating tape nozzle tip Interface coloring device Low-current switch cabinet 400 x 800 Heavy current switch cabinet 800 x 800 4 free cooling circuits manually adjustable Machine-related cooling circuits controlled Extended monitoring equipment package Equipment package extended movements Production control equipment package Optimization / operating aids equipment package Quality assurance equipment package Documentation equipment package Without granulate container 50 L Injection control TFT color monitor Oscillating elements Selogica control (sequence editor) Connection ejector plate safety device Ejector quick-release coupling Water-cooled switch cabinet Power socket vert. 1 CEE, 1 Schuko Hydraulic ejector Larger holding pressure pump for simultaneous movements of the secondary axes, e.g. core pull functions during mold opening Cycle start when closing protective hood

Condition: excellent (used), Year of construction: 2000, operating hours: 46,000 h, Functionality: fully functional, machine/vehicle number: 180316, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, Fully functional plastic injection molding machine with associated documentation and diskettes. Djlov N D Rasrfqdlokl The machine operated in clean production. The machine was injection molded with LDPE material, so the tip and screw are in first-class condition. Every 2 years, the pressures were checked and confirmed by an Arburg authorized service.

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 4450000410, clamping force: 500 kN, screw diameter: 32 mm, column diameter: 45 mm, displacement volume: 95 cm³, injection pressure: 1,076 bar, injection weight: 69 g, mold height (min.): 250 mm, overall weight: 2,430 kg, power: 16.8 kW (22.84 HP), Equipment: documentation/manual, Dr.Boy LSR (silicone) injection molding machine, built in 2024, is being sold unused due to project cancellation. Equipment Evacuation Interface for brush control Dkolev R Ia Ierfqdlel Interface for handling device (EUROMAP 67)

Condition: excellent (used), Year of construction: 2014, operating hours: 14,500 h, Functionality: fully functional, 1,0 St. gebr. Vertikal Spritzgießmaschine Hersteller: ARBURG Typ: 375V500-100 Drehtisch Baujahr: 2014 Schließkraft: 50 Tonnen Schnecken DN: 25 mm Max. Hubvolumen: 59 cm³ Steuerung: SELGOCIA Ausstattung: Dkjlrfqdewca T Nolol Drehtisch zweiteilig Durchmesser 1.000 mm

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 620 mm, displacement volume: 156 cm³, injection pressure: 2,180 bar, injection weight: 139 g, With Robotsystems Djljwgcx Asrfqdlekl

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 61014832, clamping force: 4,200 kN, screw diameter: 80 mm, clearance between the columns: 800 mm, plate width: 1,230 mm, plate height: 1,270 mm, power: 75 kW (101.97 HP), We offer you Krauss-Maffei 420-3000 CH injection molding machine. Dimensions of the mounting plate (H x W) [mm] 1270 x 1230 Clearance between columns (hxv) [mm] 800 x 800 Minimum max. mold height [mm] min 580mm Maximum opening width [mm] 1600 Rated power of pump motor [kW] 75 Rated power of barrel heating [kW] 29 Dimensions and weight (approximately) Own weight with control cabinet [t] 22.3 Dimensions (L x W x H) [m] 7.32 x 2.49 x 2.38 Machine disassembled, deposited in storage. In addition: WITMANN DFR-10 workpiece pickup robot (2010). Delrfqjrdfyhsdlekl MOTAN plastic feeder

Condition: excellent (used), Year of construction: 2017, 1x used Arburg 1500T 1600-170 Ma-No. 241988 Year of manufacture: 08/2017 Complete thermoplastic cylinder, 30 mm, highly wear-resistant Standard screw coupling, two-edge coupling geometry Selogica direct control system Technology level 2, servo-driven with 2 control pumps Special model rotary table, ergonomic design Thermoplastic processing 2-station rotary table, 180° forward/backward alternating Open nozzle, 30 mm Nozzle tip radius 35 mm Heating band for open nozzle Central clamping platen set, Ø 125 mm Blow-out device 1 with pressure reducer at station 1 Connection for blow-out device 2 at station 2 Connection for tool position monitoring on the movable mold platen Connection for tool position monitoring on the rotary table Core pull 3, simultaneous travel movement P/Q controlled, programmable Core pull 4, simultaneous travel movement P/Q controlled, programmable Core pull 1+2, on the rotary table P/Q controlled, programmable Light curtain at 180° Continuous oil cooling and filtration Connection for oil bypass filtration Extension pipe for granulate container Injection compression molding and venting with clamping unit Dslrowgb Ezsfqdlokl Interface to host computer OPC-UA 8 programmable inputs/outputs Socket combination 1CEE, 1 Schuko, protected by a 30mA Type B residual current device Socket combination 3CEE, 3 Schuko, protected by a 30mA Type B residual current device Interface WKZ 20 mA temperature control unit HB-THERM temperature control unit connection cable Printer serial USB interface CompactFlash interface for data storage Operator authorization with chip card according to EUROMAP 65 9 electrical heating control circuits for tool heating Inking device interface Lighting in the loading area 7 free cooling circuits, manually adjustable 2 cooling circuits on a moving plate for water, max. 60°C 2 cooling circuits on a turntable for water, max. 60°C 2 temperature control circuits on a moving plate for water, max. 140°C 4 temperature control circuits on a Water rotary table, max. 140°C Machine-specific cooling circuits controlled Extended monitoring package Extended travel motion package Production control package Optimization/operating aids package Quality assurance package Documentation package Axis monitoring package aXw Control ScrewPilot for 1st injection unit 8-way rotary union, top-mounted Corrosion protection treatment for rotary table Circumferential sealing lip on the outside

Year of construction: 2008, Condition: ready for operation (used), Clamping force: 800kN, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 580mm/590mm, opening stroke: 450mm, min. mold installation height: 250mm, max. mold weight: 650kg, ejector stroke: 125mm, ejector force: 45kN. Screw diameter: 35mm, shot weight: 168g, dosing volume: 185cm³, injection pressure: 1800bar, plasticizing capacity: 15g/s. Control system: NC5, robot interface: Euromap 67, machine weight: approx. 4100kg, machine dimensions X/Y/Z: 4100mm/1400mm/1900mm, operating hours: approx. 73500h. Documentation available. On-site inspection is possible. Djlrfjwgczksqdlokl

Condition: good (used), Year of construction: 2013, clamping force: 80 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,065 bar, installation height: 250 mm, total length: 4,200 mm, total width: 1,400 mm, total height: 2,000 mm, overall weight: 5,200 kg, Core features 2 Dslrfqowf I E Sodlskl

Condition: ready for operation (used), Year of construction: 2001, General Data Machine weight 16000 kg Clamping Unit Clamping force 3200 kN Additional Equipment International Dimension: 3200H-1636 This FERROMATIK K-TEC 320 S was manufactured in 2001. A robust hydraulic injection moulding machine, it's ideal for precision plastic processing. Consider the opportunity to buy this FERROMATIK K-TEC 320 S hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding Dkslrfewbwz Ioqdlol

Condition: used, Year of construction: 2008, operating hours: 75,000 h, Functionality: fully functional, clamping force: 2,800 kN, screw diameter: 45 mm, clearance between the columns: 630 mm, displacement volume: 368 cm³, injection pressure: 2,402 bar, injection weight: 320 g, opening stroke: 675 mm, plate width: 950 mm, plate height: 950 mm, installation height: 710 mm, total length: 6,620 mm, total width: 1,920 mm, total height: 2,250 mm, overall weight: 13,000 kg, Core pull 2-fold, 6-fold cascade, with robot Delswgcmgjrfqdlskl

Condition: excellent (used), Year of construction: 2018, operating hours: 20,500 h, Functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit SECHS ACHS Roboter Dslrfeu E Id Tjqdlskl Hersteller: ARBURG Typ: 570S2200-400/170 Baujahr: 2018 Schließkraft: 220 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 350 mm Öffnungsweg: 1.000 mm Schnecken DN 1: 40 mm Max. Hubvolumen: 201 cm³ Spritzteilgewicht: 184 g/PS Schnecken DN 2: 25 mm Hubvolumen: 59 cm³ Spritzteilgewicht: 54 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit Verlängerte Holme Vorverlegter Zylinder 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2018 Förderband Schutzzaun

Condition: good (used), Year of construction: 2010, 1x used Krauss Maffei KM 300-2000-380-CX with robot, safety fence, conveyor belt, and turntable! Year of manufacture: 2010 Machinery No. 61014333 Horizontal screw: 70 mm Djlewgb Enorfqdljkl Vertical screw: 30 mm Core pulls: 4x Hot runner control stations: 16 zones The machine is available immediately!

Year of construction: 2008, Condition: ready for operation (used), Clamping force: 1600kN, opening stroke: 500mm, mold installation height min./max.: 275mm/585mm, max. platen distance: 1085mm, platen dimensions X/Y: 770mm/770mm, tie bar dimensions X/Y: 520mm/520mm, ejector stroke: 160mm. Screw diameter: 40mm, screw stroke: 203mm, injection weight: 160g. Documentation available. On-site inspection is possible. Djlrfqdjwgczwjlskl

Year of construction: 2006, Condition: ready for operation (used), Injection Unit Screw diameter 55 mm Djlrfqjupm S Nsdlekl Clamping Unit Opening stroke 700 mm Distance between bars 560 x 560 mm Additional Equipment Core Valve: 1 Air Valves: 3 EU 12 for Robot Connection: Yes This Krauss Maffei 200-1000 C2 was manufactured in 2006. A hydraulic injection moulding machine featuring a tie bar distance of 560 x 560 mm and an opening stroke of 700 mm. It includes a screw diameter of 55 mm and is equipped with 1 core valve, 3 air valves, and an EU 12 connector for robot integration. A solid choice for expanding production capabilities. For more information about this hydraulic injection moulding machine, please reach out to us. Application Types Injection Moulding

Condition: good (used), Year of construction: 2007, operating hours: 55,000 h, 1x used Arburg 570C 2000-800 Golden Edition Year of construction: 09/2007 Ma-No. 206432 Auger: 50mm Blow-off valve: 2x Core pull: 1x Handling interface Host computer interface Dslrfewgb Ebsqdlokl Printer interface Interface for inking unit Connection for conveyor belt via 5-pin plug Connection for selection unit The machine is sold without any other visible peripherals / tools!

Year of construction: 2000, Condition: ready for operation (used), Clamping force: 500kN, platen dimensions X/Y: 540mm/540mm, tie bar spacing: 355mm/355mm, opening stroke: 400mm, min. mold installation height: 210mm, clearance: 610mm, ejector stroke: 125mm. Screw diameter: 30mm, L-D ratio: 20, stroke volume: 144.3cm³, injection weight: 128g, injection pressure: 1890bar. Machine dimensions X/Y/Z: approx. 3650mm/1150mm/1800mm, weight: approx. 2500kg, control: NC4, operating hours: approx. 41100h. Documentation available. On-site inspection is possible. Dolrewgczdofqdlokl

Year of construction: 2006, Condition: ready for operation (used), General Data Measurements width 2650 mm Measurements depth 9360 mm Measurements height 2430 mm Machine weight 43400Kg Injection Unit Screw diameter 80 mm Clamping Unit Opening stroke 1150 mm Distance between bars 1000 x 930 mm Additional Equipment Core Valve: 1 Air Valves: 3 EU 12 for Robot Connection: Yes Attached you will find some drawings with fundament and platens. This Krauss Maffei 600 - 3500 C3 hydraulic injection moulding machine was manufactured in 2006. It features a tie bar distance of 1000 x 930 mm and an opening stroke of 1150 mm. Equipped with 1 core valve, 3 air valves, and a screw diameter of 80 mm, it also includes an EU 12 connection for robot integration. For more information about this hydraulic injection moulding machine, please reach out to us. Dkolrfqdeupm Uqelsl Application Types Injection Moulding

Year of construction: 2007, Condition: ready for operation (used), Clamping force: 500kN, tie bar distance X/Y: 370mm/370mm, platen dimensions X/Y: 540mm/530mm, opening stroke: 400mm, min. mold height: 135mm, clearance: 535mm, ejector stroke: 125mm. Screw diameter: 30mm, injection volume: missing (please add), injection pressure: 1890bar, core pulls: 2. Machine dimensions X/Y/Z: approx. 3600mm/1200mm/1800mm, weight: approx. 2500kg, operating hours: 80300h. Documentation available. On-site inspection is possible. Dslrswgczqsfqdlskl