Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 50-380 CX injection molding machine Year of production - 2010 Number of operating hours -: 62135 Fully hydraulic closing system. MC5 control system with color monitor, integrated control panel and built-in 3 USB ports. Plasticizing system complete plasticizing system for thermoplastics in the version with abrasive protection, with a screw diameter of 35 mm, with a non-return lock and an open nozzle Tool closing system: - Mold closing force: kN 500 - Mold opening force: kN 39.9 - Mould mounting plate movement force - - -- opening: kN 21.6 -- closing: kN 16.7 - Mounting plate dimensions (h x v): mm 600 x 600 - Clearance between columns (h x v): mm 370 x 370 - Mold opening path: mm 400 - Mold installation height: mm 200 - Plate opening stroke: mm 600 - Ejector stroke: mm 100 - Ejector force: kN 22.6/9.9 Unit injection Djlq Anowa Si Djc Sokl - Screw diameter: mm 35 - Injection pressure: bar 2429 - Injection volume: cm3 154 - Injection weight for PS: g 140 - Screw speed, standard, option: rpm 295/375 Equipment: - Number of cylinder heating zones: - 5 - Number of dry cycles according to Euromap: 1/h 2900 - Oil tank capacity: 1 220 Power supply: - Nominal power of the pump motor: kW 15 - Installed power of the heaters: kW 10.97 Machine dimensions and weight: - Net weight with control cabinet: t 3.0 - Machine dimensions (length x width x height): m 3.8 x 1.4 x 2.0

Condition: excellent (used), Year of construction: 2015, ZHAFIR ZE 1900/430 (2015) ZERES, low hours Clamping force: 190 t Screw diameter: 40 mm Shot weight: 194 g Distance between tie bars V: 520 mm Distance between tie bars H: 570 mm Dkjlsvx Uhbeq Anc Sol Min mould height: 200mm Max mould height: 550 mm Shot volume: 213 cm3 Type: Horizontal Drive: Hybrid

Condition: ready for operation (used), Clamping force: 350kN, tie bar distance: 280mm/280mm, platen dimensions X/Y: 410mm/410mm, min. mold installation height: 180mm, max. opening stroke: 350mm, max. platen distance: 530mm, screw diameter: 22mm, shot volume: 47.5cm³, shot weight (PS): 41g, injection pressure: 2440bar, control: NC4, heating power: 6.3kW. Machine dimensions X/Y/Z: approx. 3100mm/1100mm/1600mm, weight: approx. 1800kg. On-site inspection is possible. Dolq Aswaa H Dsnc Sskl

Year of construction: 2001, Condition: good (used), For sale complete clamping unit for Krauss-Maffei KM 350 with fix platen, moving platen, tie-bars, etc.. Dslq Aeihppfsnc Sokl This unit is complete checked by us.

Condition: good (used), Year of construction: 2009, operating hours: 49,679 h, Functionality: fully functional, clamping force: 3,800 kN, screw diameter: 55 mm, clearance between the columns: 780 mm, displacement volume: 404 cm³, injection pressure: 1,390 bar, ejector force: 96 N, ejector stroke: 220 mm, opening stroke: 712 mm, plate width: 1,100 mm, plate height: 1,100 mm, Equipment: documentation/manual, Injection molding machine ENGEL SPEED 380-55 Stock no.: 503570 Manufacturer: ENGEL Type: SPEED 380-55 Control: CC200 Year of manufacture: 2009 Operating hours: 49679 h Technical data, closing side Closing force: 3800 kN Bar dimensions h x v: 780 x 780 mm Plate size h x v: 1100 x 1100 mm Min. installation height: 300 mm Max. installation height: 750 mm Plate spacing max.: 1450 mm Opening stroke: 712 mm Ejector stroke: 220 mm Ejector force: 96 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 5200 kg Technical data injection side Screw diameter: 55 mm Displacement: 404 cc Injection pressure: 1390 bar Screw length: 24 l/d Dkslsv E Ni Hoq Anc Sjl Screw speed: 340 min Injection flow to the outside: 1901 g/s PS Number of heating zones: 6 Nozzle path: 465 mm Dimensions & weight Machine dimensions LxWxH: 7.75m x 2.3m x 2.5m Total weight: 19000KG Equipment Hydraulic core pull 1x Air valve 4x Machine including protective housing Leveling elements Interface EUROMAP 67 Tool heating 24x

Condition: excellent (used), Year of construction: 2003, Battenfeld HM 1300/350 YEAR 2003 Wear power 130 TO Dkelq Ancodv Tbfe Sol Scrow 40mm Stroke volume 220 cm Holmen far 52 x 47 Betreibsstunden ca 79800 h

Condition: excellent (used), Year of construction: 2005, BOY 22A injection molding machine Year of production: 2005 Vertical / horizontal machine Technical data Screw diameter: 22 mm Injection volume: 30 ccm Weight: 28.45 g Injection pressure: 1732 bar Closing force: 220 kN Tie bar spacing: 254 mm Plate size: 220 x 400 mm Min mold height: 200 mm Opening stroke: 200 mm Max plate spacing: 400 mm General Installed power: 9.05 kW Operating hours: 21,600 h Dimensions: Weight: 880 kg Equipment Monitor language: German Dkeljwa Sbyoq Anc Ssl

Condition: used, Year of construction: 2008, 8 units available (year 2007-2008) only as a package for sale. Arburg 320C 500-100 (2008) Clamping force: 50 t Screw diameter: 25 mm Opening stroke 350 mm Mould height : 200 mm Distance between tie bars V: 320 mm Distance between tie bars H: 320 mm Mould clamping platens: 446x446 Injection pressure : 2240 Injection flow : 124 cm3 Ejector stroke : 125 mm Ejector force: 30 kN Djlevtzqreq Anc Sskl Net weight : 2080 kg Type: Horizontal Drive: Hydraulic Selogica CF card reader machine tested English language

Condition: ready for operation (used), Year of construction: 2006, Injection Unit Screw diameter 100 mm Clamping Unit Clamping force 800 t Max open daylight 2225 mm Distance between bars 1120 mm Djlev Adcieq Anc Sskl Mould height min 500 mm Mould height max 1175 mm Size of mold platens 784 mm Ejector stroke 250 mm This Battenfeld HM 8000/4500 + 4500 BMB 4 was manufactured in 2006. It is a hydraulic injection moulding machine, ideal for precision and efficiency in plastic processing tasks. Consider the opportunity to buy this Battenfeld HM 8000/4500 + 4500 BMB 4 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: reconditioned (used), Year of construction: 2000, Functionality: fully functional, 2000 Arburg projector. 130 tons of closing force. The machine is delivered completely reconditioned in our facilities in Heras (Cantabria). New gaskets in the sealing body. We can show it in operation. Technical details CLOSING POWER 1300 kN PLATE DIMENSIONS 660x840 OPENING STROKE 575mm MAXIMUM DISTANCE BETWEEN PLATES 800/850 DISTANCE BETWEEN COLUMNS 420x420/470x470 SPINDLE 50mm INJECTION VOLUME 353cm3 Dkslq Ancorxtpdj Sel INJECTION WEIGHT 117 YEAR OF MANUFACTURE 2000 INJECTION PRESSURE 2500bar

Year of construction: 2003, Condition: excellent (used), Display - Demag Dkolq Aohi Ttnonc Ssl Year approx 2003

Condition: excellent (used), Year of construction: 2003, Arburg 221 K 350 - 100 injection molding machine Year of manufacture: 12/2003 Horizontal/vertical machine - stand-up unit Control type: Selogica Closing system: Knee TECHNICAL DATA Closing force: 350 kN Clearance between columns: 221 mm Plate dimensions: 324 mm x 250 mm Mould size: min 150 mm - 300 mm Maximum opening stroke: 200 mm Dkolq Anewa R T Isc Ssl Max distance between plates: 350 mm - 500 mm Screw diameter: 20 mm Injection volume / Injection weight: 31 ccm / 26 grams PS Injection pressure: 2400 bar GENERAL DATA Engine: 7.5 kW Heaters: 3.5 kW Operating hours: approx. 47,000 h Dimensions L x W x H: 2.7 m x 1.4 m x 1.7 m Weight: 1150 kg

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 5300 Control Unit Brand ENGEL Model eco victory 500/80 Injection Unit Screw diameter 45 mm Stroke volume 306 ccm Injection pressure Specific max 1598 bar Screw speed 162.2ccm/s max Clamping Unit Clamping force 800 kN Opening stroke 458 mm Mould height min 300 mm Mould height max 900 mm Size of mold platens 670 mm x 670 mm Ejector stroke 100 mm Ejector force for / back 39.8 kN Dkelq Anjvw En Nec Ssl Additional Equipment Core pull DS 1 time AS 2 times This hydraulic injection moulding machine was manufactured in 2011. It features an 800 kN clamping force and a screw diameter of 45mm, capable of a shot volume of 306ccm. The platen size is 670mmx670mm, and it can handle a mould opening height from 300mm to 900mm. Consider the opportunity to buy this Engel VICTORY 500/80 hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Year of construction: 2005, Condition: good (used), 2x Piece Demag /Spritz clinder Delqed N Akye Anc Sjkl Long 150 cm Scrow 35 mm BJ ca 2005 Plus Spray clinder /Demag Long 130 cm Scrow 45 mm

Condition: excellent (used), Year of construction: 2016, ENGEL Duo 4550/500 WPX injection molding machine Year of production - 2016 Viper 40 robot CC 300 control Closing system: Tie bar spacing - 990/1130 mm Djlqswa Ebms Anc Sskl Min/max mold height - 450/1140 mm Opening stroke - 1400 mm Injection system: Closing force - 5000 kN Injection pressure - 1600 bar Screw diameter - 105 mm Injection volume - 3377 ccm Injection weight - 3073 g Core - 4 pieces on fixed plate Core - 4 pieces on fixed plate Pneumatic cascades - 10 pieces Hot runner control 40 zones

Condition: ready for operation (used), Year of construction: 2006, General Data Measurements width 1090 Measurements depth 4213 Measurements height 2040 Machine weight 2580 Tools Max weight 800 kg Injection Unit Screw diameter 28 / 32 / 38 / 42 mm Shot weight 71.1 / 92.3 / 129.8 / 158.9 g Stroke volume 2.30 / 2.00 / 2.28 / 2.24 Injection pressure 2778 / 2127 / 1508 / 1235 bar Screw speed 325 / 410 rpm Clamping Unit Clamping force 550 kn Opening stroke 38.0 kN Max open daylight 400 mm Distance between bars 380 x 335 mm Mould height min 250 mm Mould height max 650 mm Dolq Ajvpartjnc Sekl Ejector stroke 24.4 kN Ejector force for / back 20.4 / 13.5 kN General Data Measurements width 1090 Measurements depth 4213 Measurements height 2040 Machine weight 2580 Tools Max weight 800 kg Injection Unit Screw diameter 28 / 32 / 38 / 42 mm Shot weight 71.1 / 92.3 / 129.8 / 158.9 g Stroke volume 2.30 / 2.00 / 2.28 / 2.24 Injection pressure 2778 / 2127 / 1508 / 1235 bar Screw speed 325 / 410 rpm Clamping Unit Clamping force 550 kn Opening stroke 38.0 kN Max open daylight 400 mm Distance between bars 380 x 335 mm Mould height min 250 mm Mould height max 650 mm Ejector stroke 24.4 kN Ejector force for / back 20.4 / 13.5 kN This hydraulic injection moulding machine was manufactured in 2006. The BOY 55A features a clamping force of 550 kN, a max. plate distance of 650 mm, and supports a max. tool weight of 800 kg. It offers a variety of screw diameters from 28 to 42 mm, enhancing its versatility for different injection pressures and volumes. Consider the opportunity to buy this BOY 55A hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Year of construction: 1997, Condition: excellent (used), Arburg 520C-220-675 Closing 220 TO Scrow 35 mm Delq Ancsf S A R Ao Sskl Year 1997 Tie bars wide 52x52

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 450 - 3500 C3 Sprinter injection machine Year of manufacture - 2008 Fully hydraulic two-platen clamping system. MC 4 control system with color monitor, integrated control panel, and built-in disk station Plasticizing system Complete HPS-UN plasticizing system for thermoplastics with a screw diameter of 90 mm. TECHNICAL DATA Closing unit - Closing force of mold: kN 4500 - Opening force of mold: kN 280 - Moving force of the moving plate fixing the mold - -. -- opening: kN 137 -- closing: kN 116 - Dimensions of clamping plate (h x v): mm 1270 x 1200 - Clearance between columns (h x v): mm 900 x 800 - Opening path of the mold: mm 1170 - Installation height of the mold: mm 480 - Opening width: mm 1650 - Ejector stroke: mm 250 - Ejector force: kN 95/48 Injection unit - Auger diameter: mm 90 Auger drive by electric motor with increasing drive force. For independent and energy-saving plasticization for opening and closing Dkelq Anoq Nlzhsc Ssl - Injection pressure: bar 1742 - Injection volume: cm3 1953 - Injection weight for PS: g 1777 - Screw speed, standard, optional: rpm 149/247 - Injection capacity cm3/s 3817 - Injection capacity at: -- standard screw speed: g/s 103 -- increased screw speed: g/s 152 Electric-hydraulic equipment - Rated power of pump motor: kW 90 - Drive power of auger (electr.) kW 88 - Installed power of heaters: kW 59 - Number of cylinder heating zones: - 9 - Dry cycle time according to Euromap: 1/h 1400 - Oil tank capacity: l 1075 Weight and dimensions - Net weight with control cabinet: t 26.3 - Dimensions of foundation space (L x W x H): m 7.98 x 2.35 x 2.51

Condition: ready for operation (used), Year of construction: 2005, General Data Measurements width 3750 Measurements depth 5750 Injection Unit Screw diameter 35 mm Stroke volume 139 ccm Injection pressure 2500 bar Clamping Unit Clamping force 130 kn Dkjlevuciroq Anc Sel Max open daylight 579 mm Distance between bars 470 mm Mould height min 273 mm Additional Equipment Wittmann W721-0130 extraction unit 4x temperature control units: HB-Therm Thermo 5 Epson robots for selection This Arburg Allrounder 470 S 1300-350 was manufactured in 2005. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Arburg Allrounder 470 S 1300-350 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Year of construction: 2005, Condition: good (used), 2x Demag / Spritz clinder Long 150 cm Scrow 35 mm Year of manufacture approx. 2005 Plus Spritz clinder / Demag Long 130 cm Dolq Aswbak Eenc Sokl Scrow 45 mm

Condition: ready for operation (used), Year of construction: 2012, Haitian Mars 4700/2250 injection molding machine Year of production -2012 Wittmann W 832-2012 robot X axis -900 mm Y axis -1600 mm Z axis -3000 mm Closing system: Clearance between columns - 800/820 mm Min/max mold height -320/780 mm Opening stroke - 1560 mm Injection system: Closing force - 4700 kN Injection pressure - 2110 bar Screw diameter - 65 mm Injection volume - 1068 ccm Injection weight -972 g Equipment: 2x core - moving plate Dkolq Answa Dr Doc Sel

Condition: ready for operation (used), Year of construction: 2024, General Data Measurements width 6000 mm Measurements depth 7000 mm Injection Unit Stroke volume 141 ccm Injection pressure 2500 bar Clamping Unit Clamping force 1600 kN Distance between bars 520 mm Additional Equipment Removal: Robot 4x Temperature Control Units: Thermo 5 Language Options: German, English, Czech Maximum opening: 575 mm / Maximum plate distance: 1025 mm / Maximum ejector length: 175 mm Coupling diameter: 32 mm / Center ring diameter: 125 mm Valve gate: 6 HK Control points: 42 Number of hydraulic core pulls (Fixed side): 1 / Number of hydraulic core pulls (Moving side): 2 / Number of pneumatic core pulls (Fixed side): 2 General Data Measurements width 6000 mm Dolqevtt Ezj Anc Sokl Measurements depth 7000 mm Injection Unit Stroke volume 141 ccm Injection pressure 2500 bar Clamping Unit Clamping force 1600 kN Distance between bars 520 mm Additional Equipment Removal: Robot 4x Temperature Control Units: Thermo 5 Language Options: German, English, Czech Maximum opening: 575 mm / Maximum plate distance: 1025 mm / Maximum ejector length: 175 mm Coupling diameter: 32 mm / Center ring diameter: 125 mm Valve gate: 6 HK Control points: 42 Number of hydraulic core pulls (Fixed side): 1 / Number of hydraulic core pulls (Moving side): 2 / Number of pneumatic core pulls (Fixed side): 2 This Arburg Allrounder 520 S 1600-400 was manufactured in 2024. A hydraulic injection moulding machine, it represents a reliable option for precision plastic processing. Consider the opportunity to buy this Arburg Allrounder 520 S 1600-400 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2003, Netstal SynErgy 1500-600 injection moulding machine - year of manufacture 2003 - maximum short-circuit force 1500kN - injection unit 600 - screw diameter 50mm - injection volume 353 ccm - injection weight 339 g Dslq Ansm Sgrzoc Sokl - injection pressure 1890 bar - hydraulic ejector on moving platen - hydraulic core on movable disc - hydraulic core on fixed plate - two air valves - mould height 250-550mm - mould opening stroke 0-450mm - distance between columns 460 X 460 mm - machine weight 11 200 kg

Condition: ready for operation (used), Year of construction: 2017, General Data Measurements width 4050 mm Measurements depth 9200 mm Injection Unit Screw diameter 70 mm Stroke volume 1077 ccm Injection pressure 2200 bar Clamping Unit Clamping force 550 kN Distance between bars 920 mm Additional Equipment Djlq Ancjvtt Hls Sokl Plus Peripherals: 8x Temperature Control Unit Thermo 5 / Robot: KUKA KR30-3 This Arburg Allrounder 920 S 5000-2100 was manufactured in 2017. It's a hydraulic injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this Arburg Allrounder 920 S 5000-2100 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2004, operating hours: 64,300 h, General Data Measurements width 2200 mm Measurements depth 7200 mm Measurements height 2400 mm Machine weight 17700 kg Injection Unit Screw diameter 60 mm Shot weight 723 g/hp max Injection pressure 2500 bar max Clamping Unit Clamping force 3200 kN Opening stroke 700 mm max Distance between bars 720 mm x 720 mm Mould height min 300 mm Size of mold platens 1040 mm x 1040 mm Djlqeup Inlj Anc Sekl Additional Equipment The Wittmann robot is not included Conveyor belt is included, protective housing only for the electrical components No other peripherals are included. This hydraulic injection moulding machine was manufactured in 2004. It features a screw diameter of 60mm and can handle a maximum injection weight of 723g. The machine supports a clamping force of 3200kn with a maximum opening stroke of 700mm. It is equipped with special features like 2xAS core pull and 6xDS hot runner control points. Ideal for robust performance in a production setting, the Arburg Allrounder Selecta 720 S 3200-2100 machine we have for sale. Contact us for more information. Application Types Injection Moulding