Year of construction: 2013, Condition: ready for operation (used), An Arburg injection molding machine including a handling interface is available. Clamping force: 800kN, min. mold installation height: 250mm, max. mold installation height: 550mm, distance between tie bars: 470mm/470mm, clamping platen diameter: 125mm, ejector stroke: 125mm, injection weight: 132g, screw diameter: 35mm, injection pressure: 2000bar, core pulls: 1, total power requirement: 45.5kW, weight: approx. 4600kg. Documentation available. On-site inspection is possible. Csb Hcev Tny Tsl D Nogt

Condition: used, Year of construction: 2005, operating hours: 70,000 h, Functionality: fully functional, clamping force: 4 kN, screw diameter: 70 mm, Offer-Details: Stock-No. 14171 Manufacturer Engel Type of machine ES 2050 - 400 HL Year 2005 Working hours 70000 Controlversion CC200 Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 4000 kN Size of mould platens (h x v) 1400 x 1080 mm Mould height min 350 mm Max. daylight 1300 mm Hydraulic ejector - stroke 250 mm Ejector force 83 kN Injection unit: Screw diameter 70 mm Injection pressure 1482 bar Stroke volume 1155 ccm Shot weight (PS) 1040 gr. Injection rate 419 ccm/s Screw speed 183 1/min Nozzle pressure 110 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Dimensions and weights: Dimensions of the machine ca. 8,30 x 2,35 x 2,48 m Total machine weight 31200 kg Accessories: - Anti vibration pads - 2 x 24 zones water flower - Material hopper - degassing screw Additional Options: - Robot interface - 4 x hydraulic core pulls Cgebou Awals Hcl D Net

Condition: excellent (used), Year of construction: 2000, Vertical injection molding machine Clamping force: 250 kN Plate size 342 x 250 mm Screw diameter 20 mm Cob Hjv Eqgyjcl D Negt

Condition: good (used), Year of construction: 1998, Functionality: fully functional, Engel ES 200 | 50 HL Always used in a school. Cgeb Hcl Dov Abvgj Not Very low hours. Machine can be loaded.

Condition: repair required (used), Functionality: not functional, clamping force: 1,600 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, For sale is an injection molding machine from the Arburg brand and the type 470 C 1600-800 The pump and a card have been removed from the machine, so the machine is being sold as defective. It is otherwise in very good condition Cgob Hsv Edrijcl D Not Technical data: Pump hours: 61,400 Clamping force: 1600 kN Clear column spacing: 470*470 Ejector travel: 225 mm Screw diameter: 50 mm Displacement: 398 cm³ Dimensions: 4335*1635*1950 mm Weight: 6950 kg The machine is offered without peripherals Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit us on our website

Condition: refurbished (used), Year of construction: 2009, operating hours: 1,000 h, Functionality: fully functional, machine/vehicle number: 121069, input voltage: 400 V, overall weight: 550 kg, B SYSTEM 60 Machine Features: - Total flow rate (min./max. ratio): 12.4 – 68.1 kilos/minute (*) - Isocyanate flow rate (min./max.): 110 to 605 g/s (*) - Polyol flow rate (min./max.): 97 to 530 g/s (*) - Heat exchanger: 0.7 m² - Total power input: 11.5 kW - Air consumption: 130 nl/pour Storage unit: - Two insulated single-jacket steel tanks, 90 liters capacity - Sight glass - Two low-pressure switches - Manual drain valve - Polyol tank agitator - Automatic tank filling (pumps not included) Cgob Hcev S Hntsl D Nst Component temperature control: - Heating element - PT 100 probe detecting the temperature of the Materials - Connections to the cooling water system (not supplied) Mixing head: - Mechanical mixer powered by a three-phase asynchronous motor. - Pneumatic opening and closing cylinder - Conical injectors for component pressure adjustment - Component recycling through the mixing head - Push-button box with emergency stop button, program selector, and pouring control button - Standard cleaning system - Manual safety rinse - Final blast Machine completely overhauled in 2022 by Cannon: invoices available

Year of construction: 2016, Condition: ready for operation (used), An Arburg injection molding machine including handling is available. Clamping force: 4000kN, opening stroke: 700mm, min. mold installation height: 350mm, distance between tie bars: 820mm/820mm, clamping platen diameter: 160mm, ejector stroke: 250mm, injection weight: 1078g, screw diameter: 70mm, injection pressure: 2000bar, core pulls: 2, total power requirement: 124kW. Documentation available. On-site inspection is possible. Cgob Hcov Tny Hol D Not

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, clamping force: 6,500 kN, screw diameter: 90 mm, Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1300 mm Mould height min 650 mm Max. daylight 1950 mm Hydraulic ejector - stroke 250 mm Cgebsv Stcwj Hcl D Njt Ejector force 226 kN Injection unit: Screw diameter 90 / 35 mm Ls/D ratio 18 / 23 Injection pressure 1445 / 2429 bar Stroke volume 1813 / 156 ccm Shot weight (PS) 1650 / 142 gr. Injection rate 649 / 123 ccm/s Screw speed 218 / 291 1/min Plasticising rate max. 137 / 22 g/s Nozzle pressure 173 / 84 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 36 / 18,5 kW Adjustable barrel heating zones 7 / 5 Dimensions and weights: Dimensions of the machine ca. 8,70 x 5,10 x 2,60 m Total machine weight 35000 kg Accessories: - Anti vibration pads Additional options: - 1 x air valve - 48 x hotrunner controller - Accumulator - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate - Robot interface according to EUROMAP 67

Condition: used, Year of construction: 2007, Clamping force: 12,5 t Cob Hcl Dev Hxx Tj Nogt Screw diameter: 22 mm Shot weight: 31 g Shot volume: 34 cm3 Mould height: 100 mm Ejector force: 16 max. kN Screw stroke: 90 mm Injection pressure: 2000 bar Working hours: 42504 in automatic cycle Type: Vertical Drive: Hydraulic

Condition: good (used), Year of construction: 2003, Functionality: fully functional, screw diameter: 52 mm, type of input current: AC, input frequency: 50 Hz, Equipment: documentation/manual, NEGRI BOSSI 2700H-1450 injection molding machine from 2003 - Core control - Air blower - Robot interface Csb Hcl Djv S Afhs Njgt

Year of construction: 2019, Condition: used, overall weight: 140 kg, terms of delivery: EXW (ex Works) delivery time: on request Cgjb Hcljv D N Nds D Not terms of payment: 100% prior to delivery

Condition: like new (used), Year of construction: 2007, Arburg 470C 1500-800 Cobev Sd Taj Hcl D Nsgt Year of construction 06/2007 Control Selogica Operating hours: approx. 60,000h (pump) Screw diameter 70 mm Fuel weight: approx. /gr./hp Distance between tie bars 470 x 470mm Extras: Core pull Paint dispenser interface Handling interface Machine weight: 5500kg incl. Arburg Multilift Year of construction 2007 X-200mm Z-1000mm

Year of construction: 2008, Condition: ready for operation (used), Two similar Battenfeld injection molding machines are available, each with a core pull. 1) Battenfeld HM 1000/750, year of manufacture: 2004, tie bars: 4, clamping force: 1000kN, opening stroke: 500mm, hole spacing extension: by 300mm, min. mold installation height: 250mm, tie bar spacing: 520mm/470mm, clamping table diameter: 125mm, ejector stroke: 150mm, heating capacity: 14kW, injection weight: 400g, screw diameter: 45mm, injection pressure: 2100bar, total output: 36kW, machine weight: approx. 4600kg. Handling included. 2) Battenfeld HM 1000/750, year of manufacture: 2008, tie bars: 4, clamping force: 1000kN, opening stroke: 500mm, min. mold installation height: 250mm, tie bar distance: 470mm/420mm, clamping table diameter: 125mm, ejector stroke: 150mm, heating power: 14kW, injection weight: 500g, screw diameter: 50mm, injection pressure: 1714bar, total power: 36kW, machine weight: approx. 4600kg. Documentation available. On-site inspection is possible. Cgsb Hcev Tnzdjl D Nst

Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, clamping force: 6,500 kN, screw diameter: 70 mm, Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 675 mm Ceb Hsv Stbmscl D Negt Max. daylight 1825 mm Hydraulic ejector - stroke 135 mm Ejector force 226 kN Injection unit: Screw diameter 70 mm Ls/D ratio 23 Injection pressure 2389 bar Stroke volume 1097 ccm Shot weight (PS) 998 gr. Injection rate 393 ccm/s Screw speed 218 1/min Plasticising rate max. 83 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 75 kW Installed heating capacity 36 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 8,70 x 2,90 x 2,80 m Total machine weight 44000 kg Accessories: - Anti vibration pads Additional options: - 1 x air valve - 8 x pneumatic sequentional valves - Accumulator - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate - Robot interface according to EUROMAP 67

Condition: excellent (used), Year of construction: 1997, Demag Ergotech 150-440/610 Closing 150 TO NC 4 Scrow 40 mm BJ 1997 Tie bars distance 50x50 Lifting volumes 255 cm Spray-softened 230 g Cjb Hcsd N Ux Dol D Njgt

Condition: ready for operation (used), Year of construction: 2008, Demag System 800/1120-9500 injection molding machine Year of production - 2008 Closing system: Closing force: 8000 kN Plate size (h x v): 1620 x 1500 mm Gap between columns (h x v): 1120 x 1000 Mold height min-max.: 500 - 1050 mm Maximum distance between plates: 2080 mm Opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Mold weight: 7200 kg Injection system: Screw diameter: 130 mm Stroke volume: 7300 ccm Injection weight (PS): 6640 gr Injection pressure: 1300 bar Screw length: 20 l/d Cgob Hcjv T A Hhsl D Nst Electric-hydraulic equipment: Pump motor rated power [kW] 110 Heater power [kW] 79 Oil tank capacity (L): 1300 Dimensions and weight: Machine dimensions LxWxH: 12.3 m x 2.7 m x 2.7 m Total weight: 33500 / 9700 kg

Condition: good (used), Year of construction: 2004, Engel INSERT 200H/40 Cebetrhv Sj Hcl D Nogt Control: CC100 Condition: fully funtional Clamping force: 400 kN Opening stroke: 300 mm Ejector force: 20 kN Ejector travel: 100 mm Opening max. : 570 Opening min. : 270 Platen size: 590x340 mm Screw: 25 mm Screw length: 140 mm Injection volume: 69 cm3 Injection pressure: 2090 bar Weight: 5400 kg Pump drive power: 15 kW

Condition: used, Year of construction: 2013, operating hours: 33,000 h, clamping force: 55 kN, screw diameter: 32 mm, displacement volume: 965 cm³, injection pressure: 2,127 bar, overall weight: 2,300 kg, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Manufacturer: BOY Type: BOY 55E Condition: technisch überarbeitet Operating hours: ca. 33.000 CLAMPING UNIT: - Clamping force: 55 t Öffnungsweg: 400 mm Mould installation height min.: 250 mm Mould installation height max.: - Tie bar distance (h x v): 360 x 335 mm Plate dimension (h x v): - Centering (fix- movingplate): - Ceb Hcotug Thel D Nogt INJECTION UNIT: IU205 Screw diameter: 32 mm Injection weight in polystyrol: 92,3 g Stroke volume: 96,5 cm³ Einspritzdruck: 2.127 bar CONTROL: PROCAN ALPHA Screen language: DE / EN / IT / ES Operating manuel: DE EQUIPMENT: - Core pulls: - Air valves: 1x (Steuerung) Hot runner control devices: - Robot interface: Euromap 67 GENERAL DATA: - Installed heating capacity: 7,7 kW Pump drive power: 11,0 kW Total installed power: 18,7 kW Total weight: 2.300 kg Total size L x B x H: 3,5 x 1,2 x 2,1 m

Year of construction: 1998, Condition: ready for operation (used), Two injection molding machines are available. 1) Battenfeld BA 2700/1200 BK, year of manufacture: 1998, clamping force: 2700kN, platen dimensions X/Y: 900mm/1020mm, tie bar distance X/Y: 630mm/630mm, opening stroke: 550mm, mold height min./max.: 250mm/620mm, max. platen distance: 1170mm, ejector stroke: 160mm. Screw diameter: 55mm, L/D ratio: 22, injection pressure: 1305bar, stroke volume: 913cm³, injection weight: 830g. Machine dimensions X/Y/Z: approx. 6800mm/1900mm/3400mm, weight: approx. 12000kg, control: Unilog 4000, operating hours: approx. 40759h. The machine exhibits faults when switching over. 2) Engel ES 200/45 HLS, year of construction: 1998, clamping force: 45t, platen dimensions X/Y: 550mm/430mm, min. installation height: 180mm, platen distance: 530mm, opening stroke: 350mm, ejector stroke: 100mm. Screw diameter: 25mm, stroke volume: 99cm³, injection pressure: 1400bar, L/D ratio: 20, screw stroke: 140mm. Machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 3300kg, operating hours: 74165h. The machine has slight leaks in the hydraulics. Documentation available. On-site inspection is possible. Individual sale possible. Cgeb Hcsv Sufael D Net

Condition: excellent (used), Year of construction: 2003, Battenfeld 1300/350 YEAR 2003 Grinding force 130 TO Scrow 40 mm Operating hours 77890 h tie bar spacing 42x42 Cebed Sqrrj Hcl D Nogt

Condition: ready for operation (used), Year of construction: 2004, Krauss Maffei KM 2300 - 12000 MC injection molding machine Year: 2004 Controller version: MC 4 Number of operating hours 93,900 Closing unit Clamping force: 23000 kN Mould opening force, max.: 1420 kN Moving platen feed force Opening: 227 kN Moving platen feed force Closing: 203 kN Mould platen size (h x v): 2830 mm x 2400 mm Distance between columns (h x v): 2000 mm x 1600 mm Mould opening stroke: 2600 mm Min. mould height: 1100 mm Max. mould height: 1800 mm Max. daylight: 3700 mm Hydraulic ejector - stroke: 350 mm Ejector force forward/backward: 415/115 kN Injection unit Screw diameter: 135 mm Ls/D ratio: 23 Injection pressure: 1389 bar Sweep volume: 8588 ccm Injection weight, PS: 7815 g Csbev T Aw Ts Hcl D Nogt Injection rate: 1019 ccm/s Screw speed: 113 1/min Maximum plasticization rate: 191 g/s Nozzle pressure: 241 kN Electrical and hydraulic equipment Nominal pump motor capacity: 132 kW Installed heating power: 997kW Adjustable barrel heating zones: 7 Number of drying cycles: 350 1/h Tank capacity: 2500 ltr. Dimensions and weight Machine dimensions: 15.15 m x 4.15 m x 3.29 m Total machine weight: 143000 kg Maximum mold weight: 62000 kg LRX 1000 robot X-axis - 2000 mm Y-axis - 3000 mm Z-axis - 5000 mm

Condition: excellent (used), Year of construction: 1999, Angel ES 1800/350 HLClosing 350 TO (up to 400TO)Year 1999Scrow 60 mm Cgjb Hed Sym Eocl D Nst

Condition: excellent (used), Woojin Plaimm TE50 IE 70 injection molding machine Year of production 2020 3 machines available Screw diameter fi 22 mm Cjb Hcl Dsv T Aghs Negt Injection pressure 2184 bar Injection volume 34 cm3 Spacing between columns 360 X 360 weight 3,600 kg dimensions 4.0x1.3x1.6 m

Condition: excellent (used), Year of construction: 2003, Battenfeld 1300/350BJ 2003Sleisskraft 130 TOScrow 40 mmOperating hours 77890 hHolmenabstand 42x42 Cjb Hcl Ded Tnbhs Nogt

Condition: excellent (used), Year of construction: 2000, Demag 150/500-840 Closing 150 TO PVC clinder Scrow 50 mm Sprayweighted 400 g Tie bars wide 50x50 Cebsfp U Hno Hcl D Nsgt FY 2000