Condition: good (used), Year of construction: 2004, Engel INSERT 200H/40 Control: CC100 Condition: fully funtional Clamping force: 400 kN Opening stroke: 300 mm Ejector force: 20 kN Ejector travel: 100 mm Opening max. : 570 Cgslnotrhv Sj U I Sbet Opening min. : 270 Platen size: 590x340 mm Screw: 25 mm Screw length: 140 mm Injection volume: 69 cm3 Injection pressure: 2090 bar Weight: 5400 kg Pump drive power: 15 kW

Condition: used, Year of construction: 2013, operating hours: 33,000 h, clamping force: 55 kN, screw diameter: 32 mm, displacement volume: 965 cm³, injection pressure: 2,127 bar, overall weight: 2,300 kg, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Manufacturer: BOY Type: BOY 55E Condition: technisch überarbeitet Operating hours: ca. 33.000 CLAMPING UNIT: - Clamping force: 55 t Öffnungsweg: 400 mm Mould installation height min.: 250 mm Mould installation height max.: - Tie bar distance (h x v): 360 x 335 mm Plate dimension (h x v): - Centering (fix- movingplate): - INJECTION UNIT: IU205 Screw diameter: 32 mm Injection weight in polystyrol: 92,3 g Stroke volume: 96,5 cm³ Einspritzdruck: 2.127 bar CONTROL: PROCAN ALPHA Screen language: DE / EN / IT / ES Operating manuel: DE EQUIPMENT: - Core pulls: - Air valves: 1x (Steuerung) Hot runner control devices: - Robot interface: Euromap 67 GENERAL DATA: - Installed heating capacity: 7,7 kW Pump drive power: 11,0 kW Total installed power: 18,7 kW Total weight: 2.300 kg Celn U I Sjtug Thobjgt Total size L x B x H: 3,5 x 1,2 x 2,1 m

Condition: good (used), Year of construction: 1998, Closing force 600 ton Screw diameter 80 mm Weight approx. 31 ton Control EC 100 Cslnsv Enwvs U I Sbogt Including handling robot ERC 63 Machine can be inspected under power

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, clamping force: 600 kN, screw diameter: 30 mm, Operating hours approx. 65,000 h Screw diameter 30 mm - wear-resistant Column spacing 370 x 320 mm 1 core pull, air valve, 5 x hot runner system Cgoln Uov A Szyj I Sbjt

Condition: good (used), Year of construction: 2003, operating hours: 106,864 h, clamping force: 1,300 kN, screw diameter: 35 mm, The machine was very well looked after, service and maintenance were always carried out on time. Good condition, fully functional Still in use until week 11 Further service reports and documents available Technical data: Cgeln U Iorp Dyro Sbst YEAR OF MANUFACTURE: 2003 Automatic operation: 106,864 h Clamping force: 1300 kN Screw diameter: 35 mm Screw stroke: 180 mm Closing force: 50 kN Opening stroke: 500 mm distance between ejector plates: 750 mm Ejector force: 40 kN Advance package - VE561/20 LGS Position-regulated screw with control valve on the injection unit for particularly high dynamics and reproducibility of the injection process, the back pressure is regulated, the nozzle contact force is manually adjustable - VE 557/00 AES Energy-saving system for automatic performance optimization and corresponding energy energy saving through infinitely variable adjustment of the pump drive speed to the respective power requirement of the spraying cycle - VE 460/00 ED Electromechanical metering drive via a speed-controlled three-phase asynchronous motor to increase productivity through simultaneous movement, through gentler material preparation and corresponding energy savings compared to hydraulic dosing On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: new, Year of construction: 2005, screw size 60 mm injection shot weight in Polysterol 607 g/PS Cgelevkqfaen U I Sbet closing pressure 3200 kN Control SELOGICA mould space 300 mm clamping plate 1040 x 1040 mm opening stroke 700 mm total power requirement 96 kW weight of the machine ca. 17 t dimensions of the machine ca. 7 x 2.2 x 2.3 m This plastic injection moulding machine is in very good condition, can be inspected by can be inspected at the seller's premises by prior arrangement and is supplied incl. Multilift H. Operating hours: 42878h

Year of construction: 2005, Condition: ready for operation (used), Injection Unit Cgoln U Iov Ir Azj Sbst Screw diameter 100 mm Clamping Unit Opening stroke 950 mm Distance between bars 1020 x 1020 mm Additional Equipment Core Valve: 1 Air Valves: 2 EU 12 for Robot Connection This Netstal S 6000-5500E hydraulic injection moulding machine was manufactured in 2005. It features a tie bar distance of 1020 x 1020 mm and an opening stroke of 950 mm. Equipped with 1 core valve, 2 air valves, and a screw diameter of 100 mm. It also includes an EU 12 connection for robot integration. For more information about this hydraulic injection moulding machine, please reach out to us. Application Types Injection Moulding

Condition: good (used), Year of construction: 2016, Engel duo 23050/3200 (2017) Tie bar distance: 2240x 1800mm Min - Max mould: 1100-2000mm Cjln Usv Eviao I Sbegt Screw dia : 160 mm Shot volume: 14480 cm3 CC300 controll

Condition: excellent (used), Year of construction: 2000, operating hours: 29,600 h, Functionality: fully functional, clamping force: 300 kN, screw diameter: 28 mm, overall weight: 1,250 kg, BOY 30A Year: 2000 Cgjln U I Sov Rb Dtsbet Screw ø: 28 mm Hours: 29,600 h

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, clamping force: 450 kN, screw diameter: 22 mm, Number of operating hours approx. 45,000 Screw diameter 22 mm 1 core pull Handling interface Cjln U I Sov A Sypsbjgt

Condition: used, Year of construction: 2003, Vertical pressure machine designed to produce pressed rubber and plastic parts by vulcanization. Manufacturer: RUTIL Type: VERTICALE DAS 100/30 RP Year of manufacture: 2003 Technical parameters: Injection volume: 100 cm3 Injection pressure: 1480 kg/cm3 Nozzle diameter: 22 mm Hydraulic motor: 75 cm3 Max. operating pressure: 200 kg/cm2 Heating plates: 350 x 300 mm Closing force: 30 tons Minimum form: 130 mm Movable plate lifters: 350 mm Installed power: 21 kW Dimensions: width: 1400x1700 mm, height: 3050 mm Weight: 3300 kg . Cjln U I Sjuntc Esbsgt Full technical documentation. Technical condition: used machine, working until taken out of production

Condition: used, Year of construction: 2006, operating hours: 60,000 h, Injection molding machine Krauss Maffei 50-180 CX Csln U I Ssv Tmzpjbsgt Year 2006 screw di 30

Year of construction: 2004, operating hours: 64,285 h, Condition: ready for operation (used), Injection Unit Screw diameter 100 mm Clamping Unit Opening stroke 950 mm Distance between bars 1020 x 1020 mm Cgolov Ir Auon U I Sbot Additional Equipment Core Valve: 1 Air Valves: 2 EU 12 for Robot Connection: Yes This Netstal S 6000-5500E was manufactured in 2004. A hydraulic injection moulding machine featuring a tie bar distance of 1020 x 1020 mm and an opening stroke of 950 mm. Equipped with 1 core valve, 2 air valves, and a screw diameter of 100 mm. It also includes an EU 12 for robot connection. For more information about this hydraulic injection moulding machine, please reach out to us. Application Types Injection Moulding

Condition: used, Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 201815009051245, clamping force: 900 kN, screw diameter: 28 mm, clearance between the columns: 370 mm, column diameter: 420 mm, displacement volume: 67 cm³, injection pressure: 220 bar, injection weight: 61 g, mold height (min.): 150 mm, ejector force: 1,900 N, ejector stroke: 80 mm, opening stroke: 320 mm, total length: 4,310 mm, total width: 1,290 mm, total height: 1,920 mm, overall weight: 4,300 kg, type of input current: three-phase, pressing force: 90 t, For sale electric injection molding machine from 2018 in very good condition Cgjln U I Sjv Sra Ujbst

Year of construction: 2007, Condition: ready for operation (used), Various old injection molding machines are available. 1) Demag Concept 80/370-200, force: 80t, screw diameter: 30mm, year of manufacture: 2006. 2) Demag Concept 80/370-200, force: 80t, screw diameter: 30mm, year of manufacture: 2006. 3) Demag ET 150/500-610h/120v multi, force: 150t, screw diameter: 50mm/25mm, year of manufacture: 2003, operating hours: approx. 100000h. 4) Demag ET 150/500-610h/120v multi, force: 150t, screw diameter: 50mm/25mm, year of construction: 2006, operating hours: approx. 105000h. 5) Engel VC 740/150 electric, power: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 103000h. 6) Engel VC 740/150 electric, force: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 103000h. 7) Engel VC 740/150 electric, power: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 103000h. 8) Engel VC 740/150 electric, force: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 67000h. 9) Engel VC 940/200 electric, force: 200t, screw diameter: 60mm, year of construction: 2007, operating hours: approx. 98000h. 10) Engel VC 740/150 electric, force: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 103000h. 11) Demag ET 200-560-840 concept, power: 200t, screw diameter: 60mm, year of construction: 2000. 12) Demag ET 200-560-840 concept, power: 200t, screw diameter: 60mm, year of construction: 2001. 13) Engel VC 940/200 electric, force: 200t, screw diameter: 60mm, year of manufacture: 2006, operating hours: approx. 107000h. Documentation available. On-site inspection is possible. Individual sale possible. Celnev R Ew Do U I Sbsgt

Condition: reconditioned (used), clamping force: 30 kN, screw diameter: 28 mm, injection pressure: 1,340 bar, injection weight: 49 g, Awaiting refurbishment at our headquarters is this BOY 30M injection moulding machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Cjlnovvkvvj U I Sbjgt

Condition: used, A pressure machine designed to produce pressed rubber and plastic parts by vulcanization. Manufacturer: LWB Steinl Injection volume: max. 75 cm3 Injection pressure: max. 1000 bar Closure body: max. 300 kN Cgelnou Snwte U I Sbet Heating flap size: 300 x 300 mm Voltage: 380V, 50 Hz, 63A High-pressure pump capacity: 23 l/min Motor power: 7.50 kW Year of production: 1998 Technical condition: used machine, working until taken out of production

Condition: excellent (used), Year of construction: 2019, Clamping force: 900 t Screw diameter: 90 mm Shot weight: 1576 g Distance between tie bars V: 1000 mm Csln Uev D U Hno I Sbsgt Distance between tie bars H: 1180 mm Shot volume: 1732 cm3 Type: Horizontal Drive: Hydraulic

Year of construction: 2021, Condition: ready for operation (used), Injection Unit Screw diameter 70 mm Injection pressure 270 mm/s Clamping Unit Ejector stroke 250 mm Ejector force for / back 100 kn Additional Equipment High-resolution rotary encoder Integrated servohydraulics for precise control of movements Active mold protection and ejector monitoring This SUMITOMO SHI DEMAG IntElect2 500/920-2200 was manufactured in 2021. It features a screw diameter of 70 mm, a stroke of 250 mm, and a force of 100 kN. Equipped with high-resolution rotary encoder and integrated servohydraulics, it ensures precise control of movements. Ideal for those seeking the SUMITOMO SHI DEMAG IntElect2 machine we have for sale. Contact us for further details regarding this electrical injection moulding machine. Coln U Isuwf I Te Sbsgt Application Types Injection Moulding

Condition: used, Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 201707012030996, clamping force: 1,200 kN, screw diameter: 80 mm, clearance between the columns: 410 mm, displacement volume: 214 cm³, injection pressure: 192 bar, injection weight: 195 g, mold height (min.): 150 mm, ejector stroke: 120 mm, opening stroke: 360 mm, plate length: 615 mm, plate width: 615 mm, total length: 5,030 mm, total width: 1,320 mm, total height: 2,030 mm, overall weight: 4,400 kg, type of input current: three-phase, pressing force: 120 t, Clamping force: 120 T Type of machine: hydraulic machine Mold platen dimension: 615x615 mm Distance between tie bars (h x v): 410x410 mm Mold opening stroke: 360 mm Cgsln Ujv Sq Nuj I Sbjt Max. mold height: 450 mm Min. mold height mold height : 150 mm Ejector stroke: 120 mm Ejector force: 33 kN Minimum mold dimension (l x w): 290x290 mm INJECTION UNIT Screw diameter: 80mm Shot size (theoretical): 214 cm3 Injection weight (PS): 195 g Injection stroke: 170mm Injection speed: 118 mm/s Injection pressure: 186 Mpa Screw speed: 325rpm Power Maximum hydraulic pressure bar Servo motor power: 15 kW Machine dimensions (l x w x h) 5.03 x 1.31 x 2.03 m Machine weight 4.4 T

Condition: used, Year of construction: 2001, operating hours: 140,000 h, Functionality: fully functional, Equipment: documentation/manual, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) Cgeln U Isv R E Ice Sbot ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: like new (used), Year of construction: 2019, operating hours: 136 h, Functionality: fully functional, machine/vehicle number: 61032312, clamping force: 5,000 kN, screw diameter: 90 mm, clearance between the columns: 1,040 mm, injection pressure: 1,839 bar, injection weight: 2,048 g, mold height (min.): 450 mm, ejector force: 95 N, ejector stroke: 250 mm, opening stroke: 1,170 mm, plate length: 1,040 mm, plate width: 910 mm, overall weight: 28,800 kg, heating capacity: 44 kW (59.82 HP), Injection machine for sale by a mouldmaker, the machine was used mainly for mould trials and evantually for small series. It didn't work in shifts or series production. As good as new with really few hours. Cgjln U I Ssv Ulf Asbst

Condition: used, Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 201707012032351, clamping force: 1,200 kN, screw diameter: 80 mm, clearance between the columns: 410 mm, displacement volume: 214 cm³, injection pressure: 192 bar, injection weight: 195 g, mold height (min.): 150 mm, ejector stroke: 120 mm, opening stroke: 360 mm, plate length: 615 mm, plate width: 615 mm, total length: 5,030 mm, total width: 1,320 mm, total height: 2,030 mm, overall weight: 4,400 kg, type of input current: three-phase, pressing force: 120 t, Clamping force: 120 T Type of machine: hydraulic machine Mold platen dimension: 615x615 mm Distance between tie bars (h x v): 410x410 mm Mold opening stroke: 360 mm Max. mold height: 450 mm Min. mold height mold height : 150 mm Ejector stroke: 120 mm Ejector force: 33 kN Minimum mold dimension (l x w): 290x290 mm Cgelnjv Sq H Ho U I Sbst INJECTION UNIT Screw diameter: 80mm Shot size (theoretical): 214 cm3 Injection weight (PS): 195 g Injection stroke: 170mm Injection speed: 118 mm/s Injection pressure: 186 Mpa Screw speed: 325rpm Power Maximum hydraulic pressure bar Servo motor power: 15 kW Machine dimensions (l x w x h) 5.03 x 1.31 x 2.03 m Machine weight 4.4 T

Condition: used, Year of construction: 2012, operating hours: 3,133 h, Functionality: fully functional, machine/vehicle number: 61017009, clamping force: 3,500 kN, screw diameter: 80 mm, clearance between the columns: 710 mm, injection pressure: 1,855 bar, injection weight: 1,464 g, mold height (min.): 380 mm, ejector force: 95 N, ejector stroke: 250 mm, opening stroke: 920 mm, plate length: 1,060 mm, plate width: 1,060 mm, overall weight: 17,800 kg, heating capacity: 36 kW (48.95 HP), Injection machine for sale by a mouldmaker, the machine was used mainly for mould trials and evantually for small series. It didn't work in shifts or series production. As good as new. Cgolov Ulc Ijn U I Sbot

Condition: used, Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 201807012051958, clamping force: 1,200 kN, screw diameter: 80 mm, clearance between the columns: 410 mm, displacement volume: 214 cm³, injection pressure: 186 bar, injection weight: 194 g, mold height (min.): 150 mm, ejector stroke: 120 mm, opening stroke: 450 mm, plate length: 615 mm, plate width: 615 mm, total length: 4,820 mm, total width: 1,320 mm, total height: 2,120 mm, overall weight: 4,400 kg, type of input current: three-phase, pressing force: 120 t, Clamping force: 120 T Type of machine: hydraulic machine Mold platen dimension: 615x615 mm Distance between tie bars (h x v): 410x410 mm Mold opening stroke: 360 mm Max. mold height: 450 mm Min. mold height mold height : 150 mm Ejector stroke: 120 mm Ejector force: 33 kN Minimum mold dimension (l x w): 290x290 mm Cjlnev Sq D Es U I Sbsgt INJECTION UNIT Screw diameter: 80mm Shot size (theoretical): 214 cm3 Injection weight (PS): 194 g Injection stroke: 170mm Injection speed: 118 mm/s Injection pressure: 186 Mpa Screw speed: 325rpm Power Maximum hydraulic pressure bar Servo motor power: 33 kW Machine dimensions (l x w x h) 4.82 x 1.32 x 2.12 m Machine weight 4.4 T