Year of construction: 2001, Condition: excellent (used), Year of manufacture 2001 Closing force 50 ton Dkolq Ssf Tiq Ssppmsl Screw diameter 25 mm Injection pressure 2000 bar Shot weight. 54 gr Core pulls 4

Year of construction: 2005, Condition: good (used), Krauss Maffei MC3 controll panel Fully functional tested. Dkelenvtwvjq Sppmjl

Condition: good (used), Year of construction: 2006, clamping force: 800 kN, Total connected load 21.7 kW Dkolq Sppovu Dncsmjl Pump motor 18.50 KW Weight 7,400 KG

Condition: excellent (used), Year of construction: 1996, Angel ES 500/90HL Delq Sppefbg Izemskl Closing 90 tons year 1996 Scrow 40mm PVC Srow

Condition: excellent (used), Haitian Type: Mars3 5300WM/2400-720 Overall dimensions: WxHxD mm (8700 x 2800 x 2500) Screw diameter 2400: 70 mm 720: 45 mm Injection volume 2400: 1239 cm³ 720: 334 cm³ Injection capacity 2400: 1127 g  720:  304 g Injection rate 2400: 300 g/s 720: 142 g/s Injection pressure 2400: 198 MPa 720: 222 MPa Screw speed 2400: 0-184 r/min 720: 0-180 r/min Diameter of turntable : 1250 mm Max load on turntable: 3.3 t Power connection: AC 400V 3P/N/PE 50 Hz 25 kA 227 A Injection unit: Single and double cylinder control 3 modes for injection retraction Closing unit: Closing force 5300 kN Connection for Euro 18 robot Safety door Condition: used Scope of delivery: (See picture) Dkslqovvlv Rj Sppmjl Sale from location! Weight: approx. 31000 kg (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: repair required (used), Year of construction: 2006, operating hours: 6,000 h, Functionality: not functional, clamping force: 2,000 kN, screw diameter: 60 mm, clearance between the columns: 560 mm, displacement volume: 679 cm³, injection pressure: 2,006 bar, injection weight: 618 g, Injection press KRAUSS MAFFEI 200 T Locking force: 200 T Reference: KM 200 CX G03 Year: 2006 Screw diameter: 60 mm Maximum material pressure: 2006 bars Injectable volume: 679 cm3 Injection capacity: 618 g Injection flow rate: 283 cm3/sec Passage between columns (H x V): 560 mm x 560 mm Dimension of the plates: 915 mm x 915 mm Delqsvxkt Ts Sppmskl Number of hours: 6000 hours Machine for sale for parts or repairs to be done at the closing part

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, clamping force: 2,500 kN, screw diameter: 52 mm, clearance between the columns: 584 mm, displacement volume: 595 cm³, injection pressure: 2,100 bar, injection weight: 565 g, mold height (min.): 200 mm, opening stroke: 575 mm, overall weight: 14,000 kg, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, High-speed injection molding machine STORK S+ 2500/1450 for sale The machine is in very good condition. It looks and works like new. CLOSING FORCE 250 TONS Dkslq Sppjv Rgmtomel SCREW DIAMETER 52 ( MM ) INJECTION CAPACITY 565 ( G ) Neckline distance (H*V) 585 X 585 ( MM ) MAX. COMFORTABLE MOLD THICKNESS 685 ( MM ) MIN. MOLD THICKNESS 200 (MM) MOLD OPENING STROKE (MAX) 575 (MM) HEATER ENERGY 24kW MOTOR PUMP POWER 75 (kW) MACHINE DIMENSIONS (L * W * H) 7.6 X 2.0 X 2.5 m

Condition: excellent (used), Year of construction: 2017, Clamping force : 100 ton Screw diameter : 45mm Injection volume : 318cm3 Injection preussure : 1590bar Clamping stroke : 350mm Mold height : 350mm Delq Sppevzy Dgemekl Daylight : 600mm Platen size : 1100 x 600mm Rotary table size : 1200m 2 units available: Year 2016 : 3562 hours Year 2017 : 1416 hour Both are Chinese Engel production

Year of construction: 2005, Condition: ready for operation (used), Injection pressure: 2100bar, injection volume: 595cm³, injection weight: 565g, injection speed: 299cm³/s. Clamping force: 250t, clamping force: 275t, platen dimensions X/Y: 920mm/920mm, opening stroke: 575mm, mold height min./max.: 200mm/685mm, tie bar distance: 585mm, ejector stroke: 175mm, ejector stroke: 180mm, centering: 160mm, operating hours: 62149h. Documentation available. On-site inspection is possible. Dkolq Sppev Ip Rvemel

Condition: excellent (used), Year of construction: 2002, Battenfeld 4500/4500.B4 Closing 450 Tonnen Scrow 80 mm Dkelq Ssfxg D Neppmol Spritzgeweicht 2150 Holmen weit 80x80

Condition: good (used), Year of construction: 1992, Closing force 500 KN Screw diameter 30 mm Dkolq Sppovygh Nemsl Weight 3,200 KG

Condition: good (used), Year of construction: 2000, clamping force: 8,200 kN, screw diameter: 120 mm, clearance between the columns: 1,060 mm, displacement volume: 5,598 cm³, injection pressure: 1,147 bar, Sandretto 820 T injection press Reference: MEGA T 6434/820 Screw diameter 120 mm Year: 11/2000 Distance between columns: 1060 x 1060 mm Dkelq Spevxkh Ropmjl Injectable volume: 5598 cm3 Injection pressure: 1147 bars Mold thickness min max: 350 mm / 1100 mm Mold opening stroke: 1150 mm

Condition: excellent (used), Year of construction: 2008, operating hours: 67,848 h, clamping force: 700 kN, screw diameter: 35 mm, displacement volume: 144 cm³, injection pressure: 2,000 bar, injection weight: 132 g, Injection molding machine Arburg 370S-700-290 Product Code: 232 Availability: In Stock Year of production: 2008 Brand: Arburg Technical data Shot Weight: 132 g Clamping Force: 700 kN Screw dia: 35 mm Injection pressure: 2000 bar Tie bar distance: 370x370 mm Platen size: 510x510 mm Mould height min.: 200 mm Total day-light max: 600 mm Type of controls: Selogica Language: German Djlqovwcbgj Sppmekl Power: 23,9 kW Workinghours: 67848 h Weight: 3300 kg Dimensions: 3,8x1,5 m Hopper: No Euromap: Yes Air valve: Yes

Condition: like new (used), Year of construction: 2018, Engel insert 200V/45 shuttle -XS (2018) Vertical machine Controll : CC300 Clamping force: 45 t Screw diameter: 30 mm Shot volume: 99 cm3 Dkjljuxnfdeq Sppmel Type: Vertical Drive: Hydraulic Platen size HxV : 780x400mm Screw diameter: 30 mm Screw stroke: 140 mm Maximum injection capacity: 99 cm3 Injection pressure 1450 bar Injection pressure max . 2210 bar Nozzle stroke 530 mm Clamping force 450 kN Opening stroke 405 mm Maximum distance between platen 590 mm Platen size horizontal x vertical 780 x400 Ejector stroke 105 mm Total weight (without oil) 5,2 tons

Year of construction: 1998, operating hours: 62,144 h, Condition: ready for operation (used), Clamping force: 2000kN, tie bar spacing: 520mm/520mm, platen dimensions X/Y: 715mm/715mm, min. mold installation height: 250mm, max. opening stroke: 650mm, ejector stroke: 225mm, ejector force: 66kN. Screw diameter: 55mm, injection weight: 240g, injection pressure: 2500bar, stroke volume: 286cm³, injection unit: 675. Machine dimensions X/Y: approx. 5600mm/1700mm, weight: approx. 7000kg, operating hours: approx. 62144h. Documentation available. On-site inspection is possible. Expected to be available from June 2025. Dslev Ifwxoq Sppmokl

Condition: excellent (used), Year of construction: 2002, Angel Victory 330/90 Tech Dolq Seh R Npfjppmskl Closing 90 TO year 2002 Scrow 40 mm

Condition: like new (used), Year of construction: 2022, Engel duo 17060/2000 injection molding machine Year of production -2022 Robot viper 60 - RC300 integrated Z= 4280 mm X= 1800 mm Y= 2600 mm Injection system Screw diameter mm 135 Screw pitch mm 610 Maximum injection capacity cm³ 8731 Screw speed min⁻¹ 125 Screw torque Nm 14000 Maximum screw speed at reduced torque min⁻¹ 135 Reduced torque at max. speed Nm 12963 Reduced screw speed at max. torque min⁻¹ 112 Maximum screw torque at reduced speed Nm 15630 Regeneration efficiency (3-zone screw) g/s 222.9 Regeneration efficiency (barrier screw) g/s 279.2 Injection Injection efficiency cm³/s 1904 Delq Sjv Iz Umeppmskl Injection volume cm3 8731 Injection weight g 7860 Injection pressure (regeneration) bar 1648 Injection pressure (maximum) bar 2000 Nozzle Nozzle stroke mm 1100 Nozzle pressure force kN 210 Material cylinder L/D ratio - 25 Heating zones (including nozzle) - 8 Heating power kWel 88.5 Closing system Closing force kN 20000 Minimum closing force kN 2000 Opening force (with pressure cushion) kN 1600 Force opening kN 614 Opening stroke mm 3000 Max. distance between platens mm 3800 Min. mould height mm 800 Max. mould height mm 1800 Spacing between tie bars (h x v) mm x mm 2000 x 1600 Size of mould plates (h x v) mm x mm 2700 x 2430 Max. mould weight (moving platen) kg 41330 Max. mould weight (stationary platen) kg 41330 Max. total mould weight kg 62000 Dry cycle stroke (Euromap 6) mm 1400 Dry cycle time (Euromap 6) s 5.5 Ejector Ejector stroke mm 400 Ejector force kN 385 Drive Installed power of main motors kW 265 Capacity oil tank (injection unit) l 1600 Oil filter Max. cooling capacity (at 25°C) kWcool 43.2 Water consumption (at 25°C) m³/h 6.3

Condition: like new (used), Year of construction: 2021, operating hours: 250 h, clamping force: 4,780 kN, screw diameter: 70 mm, displacement volume: 1,251 cm³, injection pressure: 1,890 bar, injection weight: 1,138 g, TEDERIC electric injection press 478 T Year: March 2021 Reference DE478-E2300C Screw diameter: 70 mm L/D ratio: 20 Injectable volume: 1251 cm3 Injectable weight in PS: 1138 gr Dkolq Sppovxim Esmsl Injection pressure: 1890 bars Screw rotation speed: 220 rpm Injection speed: 160 mm/s Heating power: 33 KW Distance between columns: 850 x 800 mm Mold thickness: 320-800 mm Closing stroke: 710 mm Plate dimensions: 1270 x 1220 mm 4 hydraulic cores 3 blow guns EUROMAP 67

Condition: good (used), Year of construction: 2016, clamping force: 800 kN, Very good condition - CC300 control - Maintained exellent from big danish manufacturer. Dslqevib N To Sppmskl

Condition: good (used), Year of construction: 2002, Engel ES200/45VTHL-PRO-ELAST (2002) Clamping force: 45 t Djlq Sppsvy Anxomjkl Type: Vertical Drive: Hydraulic

Condition: excellent (used), Year of construction: 2001, operating hours: 70,180 h, clamping force: 800 kN, screw diameter: 40 mm, injection pressure: 1,830 bar, injection weight: 205 g, Demag Ergotech Viva 800-400 (144) Description without hopper General information Product Code: 144 Availability: In Stock Year of production: 2001 Brand: Demag Djlq Sppovvtx Tsmskl Technical data Shot Weight: 205 g Clamping Force: 800 kN Screw dia: 40 mm Injection pressure: 1830 bar Tie bar distance: 400 x 400 mm Platen size: 590 x 580 mm Mould height min.: 250 mm Type of controls: NC4 Language: German Power: 26,1 kW Workinghours: 70180 h Weight: 3600 kg Dimensions: 4,35 x 1,7 m Hopper: No Core pull: Yes

Condition: excellent (used), Year of construction: 2002, Arburg 320S 500-150 injection molding machine WITH SIDE MULTILIFT ROBOT Year of manufacture 2002 Selogica control Closing zone Closing force 500 kN Dkolq Sppjqqkg Ajmsl Minimum mold height min 225 Column spacing 320 x 320 mm Dimension of mounting plates 472 x 472mm Opening stroke of mold 350mm Maximum opening width 575mm Injection unit Screw diameter 30mm Injection weight (ps) 71g Injection volume 78 cm3 Specific injection pressure 2210 bar Power supply and dimensions Pump motor power 15 kW Heater power 8.4 kW Installed power 26 kW Weight of the machine 2.25t

Condition: good (used), Year of construction: 2002, clamping force: 3,200 kN, screw diameter: 75 mm, clearance between the columns: 610 mm, displacement volume: 1,259 cm³, injection pressure: 1,587 bar, BILLION HERCULE H2000 series - 320 T Clamping force: 320 T - 3200 KN Injection unit: H 2000 Screw diameter: 75 mm Distance between columns: 610 x 610 mm Plate dimensions: 920 x 920 mm Minimum/maximum mold thickness: 330 - 680 mm Opening stroke: 660 mm Injected volume: 1259 cm3 Material pressure: 1587 bars Dimensions: 7.1 x 2.1 x 2.6 m Dkolovv Nwreq Sppmel Weight: 14,000 kg

Condition: excellent (used), Year of construction: 2006, clamping force: 800 kN, column diameter: 30 mm, 3 pcs of Very well maintained 2K machines from big Danish Manufacturer. Dkolqev Du U Sj Sppmsl Always maintained 100%

Condition: excellent (used), Year of construction: 2001, Manufacturer: Engel Type: ES 650/125 HL Control: CC100 Year of Construction: 2001 Clamping force: 125 t Type: Horizontal Dslq Spovytz Nepmekl Drive: Hydraulic