Condition: excellent (used), Year of construction: 2000, Clamping force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould clamping plattens (b x h) : 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 20 mm Screw stroke: 100 mm Fjlqwaqerrn U Tsgegb Injection volume: 31 cm3 Shot weight: 26 g Injection pressure: 2350 bar Working hours: 34.748

Condition: new, We offer fast delivery of new injection molding machines. Delivery time = transportation time from the warehouse: from Wroclaw and Germany with closing force from 60 to 328 tons and from the warehouse in China from 60 to 800 tons Hydraulic injection molding machines of three and two plates up to 6500 tons of closing force on request. Fgelsrbhfueqwaqgob

Condition: excellent (used), Year of construction: 2000, Battenfeld BA600V/125H-R Closing 60 tons Scrow 30 mm Injection weight 77.1g Year 2000 Folqwasvzcv Eoqgogb Operating hours 13184 ST

Condition: good (used), Year of construction: 2004, operating hours: 66,973 h, Functionality: fully functional, machine/vehicle number: 28109, screw diameter: 22 mm, injection pressure: 2,864 bar, total length: 2,270 mm, total width: 1,118 mm, total height: 1,800 mm, overall weight: 2,000 kg, heating capacity: 3.8 kW (5.17 HP), power: 11 kW (14.96 HP), input frequency: 50 Hz, input voltage: 230 V, input current: 80 A, Equipment: documentation/manual, Battenfeld injection molding machine in good condition, disconnected in mid-2024 to make room for a new machine in the department. Fully functional, with EEC declaration of conformity. Felevx Tflsqwaqgogb

Condition: good (used), Year of construction: 1998, machine/vehicle number: 8621090, overall weight: 27,000 kg, Year 1998 / Serial No. 8621090 Fgslqsvw A Efewaqgob Closing force 500 Tns / Mold table 1300 x 1200mm Max. mold opening stroke 810 mm Min/max mold height 400 - 880 mm / Max. mold weight 6700 Kgs Machine weight approx. 27,000 Kgs. Approx. dimensions 9500 x 2400 x 2500 mm

Condition: excellent (used), Year of construction: 2016, operating hours: 18,667 h, clamping force: 420 kN, Year: 2016 Type of control: NC5 Number of hours: 18,697 H Storage location: MECA PLASTIC Deadline: AVAILABLE Closing force: 420 T Opening stroke: 770 mm Between columns: 820 x 820 mm Plate dimensions: 1200 x 1200 mm Mold min/max: 350/1020 mm Max gap between plates: 1790 mm Screw diameter: 60 mm Screw length: 25D cm3: 763 Bars: 2106 Motor power: 135 kw Heating power: 27.9 kw Closing weight: Injection weight: 24 tonnes Length dimensions: 8 m Width dimensions: 2.2 m Dimensions height: 2.70 m Folqwaqovtnc Uegogb Cores: Robot interface: YES Bi-metal: YES Others: 8 BLOW GUNS, 3 batteries on injection, 16 hot runners, pneumatic shutter nozzle, 3 programmable inputs, mixer/mixer tip screw

Condition: good (used), Year of construction: 2000, 1x used Arburg 570C 2000-350 Year of manufacture: 2000 Fgolevu Szweqwaqgob Screw: 45mm Core pulls: 1x Hot runner: 6x incl. conveyor belt

Condition: repair required (used), Year of construction: 2006, Functionality: limited functionality, clamping force: 2,200 kN, Equipment: documentation/manual, For sale is an Engel Victory 1350/220 Tech from 2006. The machine is currently in need of repair as the hydraulic pump needs to be replaced. An offer for the repair from the original manufacturer Engel is available, with a cost estimate of approx. 20,000 €. Apart from this defect, the machine is in very good condition and has always been well maintained. Additional information: Viewing possible by appointment. Fgslqwaqjvkgdljgjb The offer for the repair can be viewed on request.

Condition: excellent (used), Year of construction: 2004, Angel Victory 330/80 Phoenix Closing 80 tons Year of manufacture 2004 Scrow 40mm Plus sprue picker Wittman W702 Fgolqwasvy Ittoqgeb X-100. Y-700. Z-90 Year of manufacture 2013

Condition: excellent (used), Year of construction: 2004, clamping force: 2 kN, screw diameter: 65 mm, BILLION 200 T injection molding machine Reference : Hercule H1300/200 Year : 2004 Felqwaqeu Iy D Djgsgb Control type: DIXIT II Injection screw diameter: 65 mm 8 Mould heating zones 2 hydraulic cores 1 Pneumatic core 1 Blowgun

Condition: excellent (used), Year of construction: 2006, Arburg 420C-1000-350 (227) Product Code: 227 Availability: In Stock Year of production: 2006 Brand: Arburg Technical data Shot Weight: 210 g Clamping Force: 1,000 kN Fgelqwaeu U Dmgjqgsb Screw dia: 45 mm Injection pressure: 1670 bar Tie bar distance: 420x420 mm Platen size: 570x570 mm Mould height min.: 250 mm Total day-light max: 750 mm Type of controls: Selogica Language: German Power: 32,2 kW Workinghours: 85.400 h Weight: 3430 kg Dimensions: 4,4x1,7 m Hopper: No Core pull: Yes Euromap: Yes

Condition: excellent (used), Year of construction: 2018, operating hours: 17,000 h, clamping force: 220 kN, screw diameter: 50 mm, Year: 2018 Type of control: CC300 Number of hours: 17,000H Storage location: MECA PLASTIC Deadline: AVAILABLE Closing force: 220 T Opening stroke: 530 mm Between columns: 620 mm x620 mm Plate dimensions: 900mm x900 mm Mini/max mold: 250/600 mm Max gap between plates: 1220 mm Screw diameter: 50mm Screw length: 20D cm3: 432 Bars: 2002 Fgslqwevtm Uijaqgob Motor power: 29kw Heating power: 15.3kw Closing weight: 11.3T Length dimensions: 6.30m Width dimensions: 1.80 m Height dimensions: 2.10 m Cores: NO Robot interface: YES Bimetal: YES

Condition: good (used), Year of construction: 1990, Functionality: fully functional, Desma polyurethane processing plant, fully functional, in operation, converted to use KraussMaffei mixing heads, pumps 2x 16l Hydromatik, flow indicators, unregulated, electronic pressure switch and display, 12 programs, motor encapsulation, mixing head negotiable Fjlqwast A Ugueqgogb

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, clamping force: 1 kN, screw diameter: 45 mm, injection weight: 291 g, ARBURG injection molding machine160 T Reference : 520S 1600-800 Year : September 2014 Screw diameter [mm]: 45 Injectable weight [g]: 291 Injection pressure [bar]: 2470 Clamping force [kN]: 1600 Fgslqwaeu Iyqdjqgjb Distance between tie bar [mm]: 520x520 Platen dimensions[mm]: 688x688 Minimum high of the mold [mm]: 250 Controle unit reference : Selogica Power install [kW]: 74 Dimensions [m]: 5.20x1.95 Weight [kg]: 6350

Condition: excellent (used), Dimensions: Width 770mm Height 770mm Weight 200kg Electronic signal from the machine Fgolsu Sy Uboqwaqgjb Hydraulic power supply from the machine Maximum rotation 180 degrees Rotation determined by limit switches built into the rotary table

Condition: excellent (used), Year of construction: 2013, clamping force: 220 kN, screw diameter: 55 mm, Year: 2013 Type of control: CC300 Number of hours: 35000H Storage location: MECA PLASTIC Deadline: AVAILABLE Closing force: 220 T Opening stroke: 600 mm Between columns: 650 mm x 650mm Plate dimensions: 970 mm x 970 mm Mold min/max: 250/600 mm Max gap between plates: 1200 mm Screw diameter: 55mm Screw length: 20D cm3: 677 Bars: 2003 Motor power: 81kw Heating power: 19.8kw Closing weight: 16T Length dimensions: 7.10 m Width dimensions: 2 m Height dimensions: 2.50 m Fgelqsvtm Ipswaqgjb Cores: NO Robot interface: YES Bimetal: YES

Condition: ready for operation (used), Functionality: fully functional, clamping force: 13 kN, screw diameter: 135 mm, clearance between the columns: 1,404 mm, displacement volume: 8,874 cm³, injection pressure: 2,000 bar, plate length: 2,080 mm, plate width: 2,080 mm, pressure: 2,000 bar, SANDRETTO injection 1300 T - serie 8 Reference : 17750/1300 Clamping force : 1300 T Screw diameter : 135 mm Rapport L/D : 20 Injection pressure max : 2000 bars Injectable volume : 8874 cm3 Plastification capacity : 145 gr/sec Injection capacity : 1100 cm3/sec Platen dimensions : 2080 x 2080 mm Distance between tie bar : 1404 x 1404 mm Opening strocke : 1530 mm Diameter centering ring : 250 mm Diameter ejection ring : 250 mm Ejection ring : 400 mm Mold thickness : 450-1600 mm Dimensions : 15,86 x 3,18 x 3,16 m Folqweu Ilzuoaqgogb

Condition: excellent (used), Year of construction: 2017, operating hours: 19,088 h, Krauss Maffei 250-1400CX with robot and gas boost (224) Description General information Product Code: 224 Availability: In Stock Year of production: 2017 Fgelsuy Rpnsqwaqgob Brand: KRAUSS MAFFEI Technical data Shot Weight: 618 g Clamping Force: 2,500 kN Screw dia: 60 mm Injection pressure: 2005 bar Injection speed: 848 ccm/s Tie bar distance: 630x630 mm Platen size: 1135x1180 mm Mould height min.: 330 mm Type of controls: MC6 Language: German Power: 77,5 kW Workinghours: 19.088 h Weight: 19.300 kg Dimensions: 6,5x2,3x2,3 m Hopper: No Core pull: Yes Euromap: Yes Air valve: Yes Heating channels: Yes Gas bottle: Yes

Condition: excellent (used), Year of construction: 2017, operating hours: 25,000 h, clamping force: 110 kN, screw diameter: 35 mm, clearance between the columns: 510,460 mm, mold height (min.): 150,450 mm, pressure: 2,400 bar, power: 6.6 kW (8.97 HP), Year: 2017 Type of control: CC300 Number of hours: 25,000H Storage location: MECA PLASTIC Deadline: AVAILABLE Screw diameter: 35mm Screw length: 20D cm3: 168 Bars: 2400 Fgelqevrdttswaqgeb Closing force: 110 T Opening stroke: 400mm Between columns: 510mm x 460mm Plate dimensions: 730mm x 680mm Mini/max mold: 150/450mm Max gap between plates: 850 mm Motor power: 6.6 kw Heating power: 4kw Closing weight: 6.6T Length dimensions: 5.10 m Width dimensions: 1.60m Height dimensions: 2.20m Cores: NO Robot interface: YES Bimetal: YES

Condition: excellent (used), Year of construction: 2002, clamping force: 800 kN, screw diameter: 30 mm, clearance between the columns: 370 mm, displacement volume: 106 cm³, injection pressure: 2,470 bar, injection weight: 97 g, ejector force: 400 N, plate width: 570 mm, overall weight: 3,180 kg, ARBURG Allrounder 80 T type 370C 800-250 in very good condition Closing force: 80 T Year: 04 / 2002 Screw diameter: 30 mm Max. injectable volume: 106 cm3 Injectable weight: 97 gr Injection pressure: 2470 bar Platen dimensions: 570 x 570 mm Distance between columns: 370 x 370 mm Fgolqwaqouyluregeb Minimum mold thickness: 250 mm Machine weight: 3180 kg

Condition: good (used), Year of construction: 2004, clamping force: 15 kN, screw diameter: 135 mm, displacement volume: 9,800 cm³, injection pressure: 1,710 bar, injection weight: 8,920 g, ejector force: 180 N, ejector stroke: 500 mm, plate width: 2,060 mm, plate height: 1,950 mm, overall weight: 91,000 kg, NEGRI BOSSI 1500 T injection molding machine Clamping force: 1500 T Screw diameter: 135 mm L/D ratio: 20 Max. material pressure: 1710 bar Injection volume: 9800 cm3 Injectable weight in PS: 8920 g Plasticizing capacity: 180 gr/sec Distance between columns (H x V): 1400 x 1250 mm Tray dimensions (H x V): 2060 x 1950 mm Max. mold thickness: 1500 mm Fslqwjuwd Dtsaqgjgb Max. opening stroke: 1500 mm Hydraulic ejection force: 180 KN Robot interface Blowpipes: 3 Hydraulic cores: 3 Dimensions: 14700 x 3175 x 2785 mm

Condition: good (used), Year of construction: 1996, clamping force: 3 kN, screw diameter: 50 mm, injection pressure: 2,400 bar, ENGEL 300 T injection molding machine bi material Reference : ES150H200L Year : 1996 Clamping force : 300 T 2 Screw diameter : 50 mm - 25 mm Maximum material pressure: 2400 bars - 2400 bars Injection volume: 422 cm3 - 68 cm3 Fgslqwaqsupl Szjgob Platen dimensions (H x V): 1050 x 900 mm Hydraulic cores: 3

Condition: good (used), Year of construction: 1995, clamping force: 1 kN, screw diameter: 45 mm, displacement volume: 318 cm³, injection pressure: 2,040 bar, ENGEL 150 T injection molding machine Reference : ES 650/150 HL Year : 1995 Clamping force : 150 T Screw diameter : 45 mm Maximum material pressure: 2040 bars Injection volume: 318 cm3 Platen dimensions (H x V): 820 x 750 mm Fgjlqwaeupl Suoqgjb Hydraulic cores: 2

Condition: good (used), Year of construction: 2002, Functionality: fully functional, clamping force: 17 kN, screw diameter: 135 mm, displacement volume: 8,160 cm³, injection pressure: 1,600 bar, ENGEL 1750 T injection molding machine Reference : T18000/1000 Year : 2002 Clamping force : 1750 T Screw diameter : 135 mm Maximum material pressure: 1600 bar Injection volume: 8160 cm3 Fgolqoummktswaqgeb Distance between columns (H x V): 1805 x 1405 mm Platen dimensions (H x V): 2660 x 2250 mm Minimum mold thickness: 700 mm Maximum mold thickness: 1500 mm Hydraulic cores: 2

Condition: good (used), SANDRETTO serie 9 1300-300 Clamping force : 300 T Distance between tie bar : 570 x 570 mm Platen dimension : 860 x 860 mm Mould thickness min/max : 210 - 730 mm Fgolqwok Unbljaqgob Opening strocke max : 630 mm Injectable volume : 658 cm3 Injection presure on the material : 1985 bars Screw diameter : 55 mm