Condition: like new (used), Year of construction: 2014, operating hours: 57,492 h, Functionality: fully functional, machine/vehicle number: 227349, clamping force: 400 kN, screw diameter: 18 mm, clearance between the columns: 270 mm, displacement volume: 23 cm³, injection weight: 21 g, Equipment: documentation/manual, Manufacturer: Arburg Type: 270C 400-70 Control unit: Selogica Year of manufacture: 2014 Operating hours: 57,492 h Machine number: 227349 Extras - Robot interface - Highly wear-resistant screw - Separation gate - CF drive - Complete documentation and software (on CF card) German language - From first owner - Made in Germany Continuous maintenance by the manufacturer and previous owner Clamping unit Clamping force: 400 kN / 40 t Tie-bar spacing: 270 x 270 mm Clamping platens: 446 x 446 mm Opening stroke: 350 mm Mold height: 200 mm min. Distance between platens max. 550 mm Ejector stroke: 125 mm Ejector force: 30 kN max. Injection unit Screw diameter: 18 mm Injection volume: 23 cc Shot weight: 21 g Injection pressure: 2500 bar Electrical system Pump: 11 kW Heating: 4 zones, 4 kW Installed power: 15 kW Pre-fuse: 50 A Weight: 2150 kg Warranty Warranty until first commissioning Loading/Shipping Free loading onto the buyer's truck or carriage paid for Available from our warehouse in Hanover, Germany +++++ We have an additional 6 machines of this machine type with the same equipment in stock+++++ All prices are negotiable. 07 Arburg 270C 400-70 v. 2008 No. 208574 - 72,967 h - €10,000 Handling interface: - Screw 18 mm 06 Arburg 270C 400-70 v. 2011 No. 215701 - 61,134 h - €14,000 Handling interface: - Screw 18 mm 05 Arburg 270C 400-70 v. 2007 No. 215701 203129 - 89,470 h - €8,000 Handling interface: - 18 mm screw Dkjbsv U Uhgj Erfxfol 04 Arburg 270C 400-70 v. 2014 No. 227349 - 57,492 h - €16,900 Handling interface: - 18 mm screw 03 Arburg 270C 400-70 v. 2010 No. 213142 - 78,394 h - €11,000 Handling interface: - 18 mm screw 02 Arburg 270C 400-70 v. 2010 No. 213141 - 75,942 h - €10,000 Handling interface: - 18 mm screw Information about the machines we offer and our company - We only sell machines purchased from our own production facility from our Hanover warehouse - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency goods - We are NOT an agent dealing with third-party property. - All machines offered come from successful companies for whom maintenance and care are a matter of course - All machines offered can be inspected in our warehouse

Condition: excellent (used), Year of construction: 2021, ENGEL DUO 17060/2700 (2021) 🔧 Technical Specifications • Clamping force: 27,000 kN • Tie bar spacing (horizontal × vertical): 2,130 × 1,750 mm • Platen size: 2,970 × 2,640 mm • Mold height (min–max): 800 – 1,900 mm • Opening stroke: 3,100 mm • Max. distance between platens: 5,090 mm • Dry cycle (Euromap 6, 6 mm stroke): 5.8 s • Max. mold weight (fixed/moving platen): 50,000 kg each 🧩 Injection & Plasticizing Unit • Screw type: S4V G18 • Screw diameter: 150 mm • Injection volume: 10,780 cm³ • Injection pressure (max): 1,620 bar • Injection speed: 87 mm/s • Plasticizing rate (barrier screw): 235 g/s • Screw speed: up to 115 rpm 🔩 Nozzle & Ejector • Nozzle stroke: 1,300 mm Dobowd Sywo Erfxfskl • Nozzle contact force: 210 kN • Ejector stroke: 400 mm • Ejector force: 385 kN ⚙️ Drive & Power • Main motors installed power: 192 kW • Reload pump motor: 16 kW • Oil reservoir capacity: 1,600 liters • Main power: 3×400V, N+PE / 50 Hz ➕ Additional Features & Configuration • T-slot platen with ejector back confirmation • Locating ring Ø 120 mm • Sprue bush “R”: 19 mm • Hydraulic corepull 2+2, air valve 1+1 • Mold heating control with 144 zones (24pin, K-type) • Valve gate interface with 36 zones (16pin DC24V) • Abrasion/corrosion-resistant screw barrel • Servo hydraulic drive • Oil maintenance system • UPS (AVR) backup unit • Robot interface EM67 • Cooling circuit: 1” inlet, 2 zones per platen (90°) • Autoclamp system for fast mold changes

Condition: ready for operation (used), Year of construction: 2003, operating hours: 33,063 h, Functionality: fully functional, clamping force: 220 kN, screw diameter: 22 mm, injection pressure: 1,732 bar, injection weight: 27 g, Newly refurbished, we have this BOY 22D. The machine is a compact 22 tonne clamp machine with a very easy to use controller with the Dipronic system. These machines have stood the test of time and remain very popular as they are simple to use, cheap to repair and reliable. Fitted with a 22mm diameter screw, which gives a max shot weight PS (g) of 27. Dobswak Edo Erfxfjkl Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free.

Condition: excellent (used), Year of construction: 2004, Krauss Maffei KM 650 - 3500 C2 injection molding machine Year of production - 2004 Number of operating hours - 70,000 Deb Erfxjwhm Uksfskl Wittmann W643 robot - 339 Year of production -2004 X-axis servo 1200 mm Y-axis servo 2400 mm Z-axis servo 6000 mm C-axis servo +/- 90° A-axis servo +/- 180° vacuum 4 circuits grippers 4 circuits Fully hydraulic closing system. MC 4 control system with color monitor, integrated control panel and built-in disk station. Plasticizing system complete plasticizing system for thermoplastics with screw diameter 100 mm, with non-return lock and open nozzle. Closing unit: - Mold closing force: kN 6500 - Mold opening force: kN 346 - Mould mounting plate movement force - opening kN 169 - closing kN 144 - Mounting plate dimensions (h x v): mm 1490 x 1440 - Clearance between columns (h x v): mm 1000 x 930 - Mold opening stroke: mm 1150 - Minimum mold height: mm 600 Injection unit: - Screw diameter: mm 100 - Injection pressure: bar 1742 - Injection volume: cm3 2411 - Injection weight for PS: g 2170 - Injection efficiency cm3/s 649 Electric-hydraulic equipment: - Nominal power of the pump motor: kW 90 - Power of installed heaters: kW 44 - Number of cylinder heating zones: 7 - Oil tank capacity: l 1240 Dimensions and weight: - Net weight with control cabinet: t 39.5 Technical condition: All hydraulic lines replaced 12/24; last Krauss Maffei inspection 03/24; New screw drive (hydraulic) 01/25; new backflow block 01/25; Additionally not included in the price: new injection cylinder with screw and

Condition: good (used), Year of construction: 1997, Ref. no.: 18552 Hersteller: BOY Type: 22 M Dksb Erfewgp Dfsxfjl Year of construction: 1997 Clamping unit Clamping force: 22 ton Opening stroke: 200 mm Distance between tie bars: 254 mm Mould height min.: 200 mm Mould height max.: 400 mm Platen size (h x v): 425 x 400 mm Injection unit Screw diameter: 28 mm Injection volume: 49 cm³ Shot weight: 44 g Injection pressure: 1069 bar Measurements and weight Dimensions: 2.3 x 0.81 x 1.63 m Machine weight: 760 kg

Condition: excellent (used), Year of construction: 2003, operating hours: 20,092 h, Functionality: fully functional, machine/vehicle number: 190332, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 20092 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. Djb Eegrzh Eerfxfekl tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: good (used), Year of construction: 2006, Model: HM 210/1000 S Clamping force: 210 t Dkjb Eou Ekbherfxfsl Distance between tie bars: 630 x 570 mm Mould height: 300 mm Daylight max. : 1050 mm Screw diameter: 50 mm Injection pressure: 2016 bar Injection volume: 491 cm3 Shot weight: 440 g Transport parameters: weight 10000 kg, L x W x H: 5000 x 1700 x 2300 mm Controll: Unilog B4 Videos on request.

Condition: excellent (used), Year of construction: 2016, Krauss Maffei KM 1600-12000 MX Blu Power injection molding machine Servo-driven machine Year of production -2016 Closing system: Closing force 16000 kN Djb Erowhmn Refxfokl Mould opening force 1120 kN Dimensions of mould mounting plates (width x height) 2550 x 2100 mm Clearance between columns (width x height) 1870 x 1420 mm Mould opening stroke 2700 mm Mould height (min. - max.) 700 - 1600 mm Clearance (daylight) 3400 mm Ejector stroke 350 mm Ejector force (forward / backward) 300 / 15 kN Injection system: Screw diameter 120 mm Length to diameter ratio (Ls/D)23.0 Injection pressure1758 bar Injection volume 6786 cm³ Injection weight (PS) 4818 g Screw rotation speed144 rpm Plasticizing efficiency 183 g/s Installed heating power 86 kW Number of adjustable cylinder heating zones 7 Nozzle pressure 166 kN Dimensions : 13.55 X 4.04 X 2.93 Weight : 83 tons

Condition: good (used), Year of construction: 2010, Ref. no.: 18482 Hersteller: KRAUSS MAFFEI Type: KM 300 / 2000 CX Year of construction: 2010 Deb Eswgp Anorfxfekl Clamping unit Clamping force: 300 ton Opening stroke: 820 mm Distance between tie bars: 810 X 720 mm Mould height min.: 480 mm Opening width: 1300 mm Injection unit Screw diameter: 60 mm Injection volume: 792 cm³ Shot weight: 720 g Injection pressure: 2420 bar Measurements and weight Dimensions: 6,7 X 2,1 X 2,4 m Machine weight: 16400 kg Additional information & extras Accumulator: 1 pcs Robot Producer: Krauss Maffei Type: KM LRX S 250 Year: 2010

Condition: excellent (used), Year of construction: 2004, Here we offer a very well maintained constantly serviced injection molding machine. complete maintenance by manufacturer until current Injection molding machine: Manufacturer / Type: Krauss-Maffei KM80 220 C2 Serial No.: 61006272 year of construction: 2004 Control system: MC4 Clamping unit clamping force: 800 kN /80 tons tie bar distance: 405 x 405 mm Mold installation height min.: 250 mm platen distance max.: 750 mm Clamping platens standard: 610 x 610 mm ejector stroke: 150 mm core pull: 1x pcs. Injection unit Injection unit / cylinder ø30 mm Shot weight max. (ø30):: 77g/hp Injection flow: 73cm³/sec Spec. injection pressure: 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & Weights Weight with control cabinet: 3,8 t Length: 3800 mm Width (machine only): 1050 mm Height: 1890 mm Oil filling: 270 L Dkeb Ersh Dr E Tjfxfol Location: Hannover / Lower Saxony The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer! The machine available now in our warehouse free loaded on truck of the buyer or free to the door against freight reimbursement

Condition: good (used), Year of construction: 2004, Ref. no.: 18481 Hersteller: ARBURG Type: 320 C 600 – 250 Year of construction: 2004 Clamping unit Clamping force: 60 ton Opening stroke: 350 mm Distance between tie bars: 320 X 320 mm Mould height min.: 200 mm Platen size (h x v): 446 X 446 mm Djbjwgp Ahj Erfxfokl Injection unit Screw diameter: 25 mm Injection volume: 45 cm³ Shot weight: 40 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,5 X 1,5 X 1,7 m Machine weight: 2330 kg

Condition: like new (used), Year of construction: 2008, operating hours: 58,000 h, Functionality: fully functional, super well-maintained injection molding machine from clean room (pharmaceutical production) - fully functional with functional guarantee Dkeboubamvj Erfxfol - with GEKU SR 500 ST. linear robot - perfect optical condition Technical data Manufacturer Engel Type e-max 200/100 serial number 170609 Year of construction 2008 Operating hours 58774 h approx. Dimensions L/W/H 4.0 x 1.3 x 1.9 mtr. Weight 3,900 kg Fully functional Condition excellent Clean room Special Control unit CC200 Screw ⌀ 25 mm Injection weight 55 gr./hp Injection pressure 2400 bar Injection volume 59 ccm Clamping force 1000 kN / 100 to. Distance between tie bars 460 x 410 Clamping platens 650 x 600 mm mold mounting height 150-450 mm max distance between platens 800 mm Opening stroke 350 mm Ejector stroke / force 100 mm / 25 kN Clamping unit electric Connected load: 45 KW Rated current: 69 A The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras GEKU Robot SR 500 ST Simotion control X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-folding axis: SWM 45 C-axis : Servo Gripper: SWS16 B-axis: not available Guarantee Warranty until first commissioning Loading/shipping FCA-free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover /Germany Financing On request - installment plan option Price: On request

Condition: good (used), Year of construction: 2001, Ref. no.: 18404 Hersteller: ARBURG Type: 420C-1300-350 Year of construction: 2001 Clamping unit Clamping force: 130 ton Opening stroke: 500 mm Distance between tie bars: 420 x420 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 605 x 605 mm Injection unit Screw diameter: 45 mm Injection volume: 230 cm³ Shot weight: 210 g Injection pressure: 1670 bar Measurements and weight Dimensions: 4,68 x 1,3 x 2,2 m Deb Erfjwgpzkoxfekl Machine weight: 5100 kg Additional information & extras Core pull: 1 pcs

Condition: like new (used), Year of construction: 2006, operating hours: 50,332 h, Functionality: fully functional, machine/vehicle number: 200943, clamping force: 1,000 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection weight: 97 g, Manufacturer: Arburg Type: 420C 1000-290 Year of manufacture: 2006 Machine No. 200943 Control system: Selogica Operating hours: 50,332 h Dkjbev U T Ncj Erfxfel Clamping unit Clamping force: 1000 kN/100 t Tie bar spacing: 420 x 420 mm Mold clamping platens: 570 x 570 mm Ejector travel: 175 mm max. Opening travel: 500 mm Mold installation height: 250 mm Clamping platen spacing: 750 mm max. Injection unit Screw diameter: 30 mm Injection volume: 106 cc Injection weight: 97 g/PS Injection pressure: 2500 bar Extras Handling interface Hardened screw Weight/Dimensions 4.14 x 1.60 x 2.08 mtr. (L x W x H) Weight: 3650 kg Connected load: 80 A Warranty Warranty until first use Loading/Shipping Free loading onto the buyer's truck or free delivery against freight reimbursement Available from our warehouse in Hanover, Germany Information about the machines we offer and our company - We only sell machines purchased from our own ongoing production from our warehouse in Hanover - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency goods - We are NOT an agent dealing with third-party property. - All machines offered come from successful companies for whom maintenance and care are a matter of course - All machines offered can be inspected in our warehouse

Condition: good (used), Year of construction: 2008, Ref. no.: 18383 Hersteller: DEMAG Type: Systec 420-2300 NC5 Year of construction: 2008 Clamping unit Clamping force: 420 ton Opening stroke: 770 mm Distance between tie bars: 820 X 820 mm Mould height min.: 380 mm Mould height max.: 825 mm Platen size (h x v): 1200 X 1100 mm Injection unit Screw diameter: 60 mm Injection volume: 890 cm³ Shot weight: 810 g Injection pressure: 2420 bar Measurements and weight Djb Erfjwgpzdsxfjkl Dimensions: 8,2 X 2,2 X 2,4 m Machine weight: 22300 kg Additional information & extras Core pull: 4 pcs Air valve: 7 pcs Hot runner systems: 8 pcs.

Condition: excellent (used), Year of construction: 2005, Here we offer a very well maintained constantly serviced injection molding machine complete maintenance by manufacturer until current Injection molding machine Krauss-Maffei KM 65-160 C2 Injection molding machine: Manufacturer / Type: Krauss-Maffei KM65 160 C2 Serial No.: 61007063 Year of manufacture: 2005 Control system: MC4 complete annual maintenance by the manufacturer clamping unit: clamping force: 650kN /65 tons tie bar distance: 405 x 405mm mold installation height min.: 250mm platen distance max.: 750mm Clamping platens standard: 610 x 610mm ejector stroke: 150mm core pull: 1 x pcs. Injection unit Injection unit size / cylinder ø: 160 / cylinder ø25mm and cylinder ø18mm Shot weight max (ø25): 47g/PS Dob Erjh Dp R Eefxfokl Injection flow: 63cm³/sec Spec. injection pressure: max. 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & weights: Weight with control cabinet: 3.8 t Length: 3800mm Width (machine only): 1050mm Height: 1890mm Oil filling: 270 L Location: Hannover / Lower Saxony The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer! The machine is available now in our warehouse free loaded on truck of the buyer or free to the door against freight reimbursement

Condition: good (used), Year of construction: 1997, Ref. no.: 18368 Hersteller: ARBURG Type: 320 S 500-150 Year of construction: 1997 Dkebjwgpy Hj Erfxfol Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 320 X 320 mm Mould height min.: 300 mm Mould height max.: 550 mm Platen size (h x v): 446 X 446 mm Injection unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight: 75 g Injection pressure: 2200 bar Measurements and weight Dimensions: 3,25 x 1.15 x 2,0 m Machine weight: 2250 kg

Condition: like new (used), Year of construction: 2007, operating hours: 47,800 h, Functionality: fully functional, machine/vehicle number: 203241, Used injection molding machine - New screw with original Arburg Multilift H The machine has a complete history with all major repairs and component replacements such as the screw, cylinder, etc. (In addition, the annual oil and filter changes, etc., were of course performed.) See document for download Manufacturer: Arburg Type: 470C 1500-350 Year of manufacture: December 2007 Machine No. 203241 Control: Selogica Operating hours: 47,800 h Continuous maintenance by manufacturer Clamping unit Clamping force: 1500 kN/150 tons Tie-bar spacing: 470 x 470 mm Mold clamping platens: 650 x 650 mm Ejector stroke: 175 mm Opening stroke: 500 mm Mold installation height: 250 mm Clamping platen spacing: 750 mm max. Dob Eevhb Iyorfxfjkl Injection unit Injection volume: 145 cc Injection weight: 127 g Screw diameter: 35 mm Injection pressure: 2500 bar Extras Multilift H Handling interface Core puller - Available immediately from our Hanover warehouse, free on load or free to your door with freight reimbursement - Functionally tested (guaranteed functionality until first commissioning)

Condition: good (used), Year of construction: 1998, Ref. no.: 18333 Hersteller: DEMAG Type: 330-1450 NC4 Year of construction: 1998 Clamping unit Clamping force: 330 ton Dkjb Erfxjwgpymjfol Opening stroke: 675 mm Distance between tie bars: 710 x 630 mm Mould height min.: 330 mm Mould height max.: 710 mm Platen size (h x v): 1040 X 950 mm Injection unit Screw diameter: 50 mm Injection volume: 530 cm³ Shot weight: 480 g Injection pressure: 2426 bar Measurements and weight Dimensions: 6,5 X 2,0 X 2,3 m Machine weight: 14300 kg

Condition: good (used), Year of construction: 2001, Ref. no.: 18331 Hersteller: ARBURG Type: 320 S 500-150 Year of construction: 2001 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 320 x 320 mm Mould height min.: 225 mm Opening width: 575 mm Platen size (h x v): 446 x446 mm Injection unit Deb Erfjwgpygexfskl Screw diameter: 25 mm Injection volume: 54 cm³ Shot weight: 49 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,5 x 12 x 1,9 m Machine weight: 2250 kg

Condition: good (used), Year of construction: 2003, Ref. no.: 18330 Hersteller: ARBURG Type: 320 S 500-150 /60 with turntable Year of construction: 2003 Clamping unit Clamping force: 50 ton Dksb Erfxewgpyaefol Opening stroke: 350 mm Distance between tie bars: 320 X 320 mm Mould height min.: 225 mm Mould height max.: 575 mm Platen size (h x v): 446 X 446 mm Injection unit Screw diameter: 25 + 15 mm Injection volume: 39 + 20 cm³ Shot weight: 35 + 18 g Injection pressure: 2210 bar Measurements and weight Dimensions: 3,5 X 1,2 x 1,9 m Machine weight: 2250 kg

Condition: good (used), Year of construction: 2004, Ref. no.: 18255 Hersteller: ENGEL Type: Victory 750 / 180 tech Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Dksb Eswgpx Nerfxfjl Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009

Condition: good (used), Year of construction: 1997, Ref. no.: 18142 Hersteller: DEMAG Type: Ergotech pro 50-270 Year of construction: 1997 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Distance between tie bars: 355 x 355 mm Mould height min.: 210 mm Platen size (h x v): 540 x 540 mm Injection unit Screw diameter: 35 mm Injection volume: 106 cm³ Shot weight: 95 g Injection pressure: 2573 bar Measurements and weight Dimensions: 3,65 x 1,15 x 1,18 m Machine weight: 3600-2500 kg Deb Eewgpx Aerfxfskl

Condition: good (used), Year of construction: 2006, Ref. no.: 18140 Hersteller: BATTENFELD Type: 25/50 Unilog B2 Year of construction: 2006 Clamping unit Clamping force: 25 ton Opening stroke: 450 mm Distance between tie bars: 270 X 270 mm Mould height min.: 150 mm Dob Eswgpxvsrfxfokl Injection unit Screw diameter: 14 mm Injection volume: 15 cm³ Shot weight: 7 g Injection pressure: 2650 bar Measurements and weight Dimensions: 2,25 X 0,90 X 1,30 m Machine weight: 1100 kg

Condition: good (used), Year of construction: 2006, Ref. no.: 18138 Hersteller: DEMAG Type: IntElect 80-370-100 NC 4 All electric Year of construction: 2006 Clamping unit Clamping force: 80 ton Opening stroke: 850 mm Distance between tie bars: 370 X 370 mm Mould height min.: 200 mm Mould height max.: 510 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 22 mm Injection volume: 37 cm³ Dkeb Erfxjwgpxpofsl Shot weight: 32 g Injection pressure: 2580 bar Measurements and weight Dimensions: 4,50 X 1,28 X 1,95 m Machine weight: 4750 kg