Condition: used, Year of construction: 1997, machine/vehicle number: HGS-Single A 97 03 005 Pos.6, Description for the diagram: 1 – Infeed table with cleaning unit (air blower) and crosswise brush for table width, collects residual dust from components 2 – Roller coating machine No. 1 3 – Roller coating machine No. 2 4,5 – UV lamp with conveyor – one lamp illuminating from above 6 – Quick Wood System RO1400 brushing machine 7 – Venjakob spray booth – 8 spray guns 8,9,10,11,12 – Drying tunnel with mechanical top air supply via nozzles, temperature and airflow can be regulated in 3 zones 13,14 – UV lamp with conveyor – 2 lamps positioned at an angle to the workpiece, curing the edges as well 15 – Four-shaft brushing machine with individual height and speed adjustment for each shaft 16 – Intermediate sanding outfeed table 17 – Cleaning unit (air blower) for light surface dust removal 18 – Venjakob spray booth – single-circuit, but can be switched to a second by exchanging the entire spray gun rack (a spare is included) and switching the pump (two pumps included) 19 – Roller conveyor; lineup supported by photoelectric sensors for loading the dryer 20 – 14-shelf drying oven Laodpfx Aey Sn Srobnoc 22 – Outfeed table with two speed levels depending on the unloading speed required by the finishing line.

Condition: used, Promac brand paint machine, model S.3P.3L, consisting of paint pump, 3 paint guns, 3 UV lamps for drying and transport tape from 6200 x 10 mm, command panel, timers and 'manual/automatic' drives. Lodey S Ac Eopfx Abnjac Promac brand painting machine, model S.3P.3L, consisting of a paint pump, 3 paint guns, 3 UV lamps for drying and a 6200 x 10 mm conveyor belt, control panel, timers and “manual/automatic” drives.

Condition: ready for operation (used), Year of construction: 2007, Brand: Sorbini Model: VS/33-ACT-F Machine no.: MP1SCO27052 Year of manufacture: 2007 Compressed pneumatic air Lsdoxtal Depfx Abnsac Pneumatic propellers Motor: 1.6 kW Weight: 1150 kg Stock no.: 2002709BXA

Year of construction: 2001, condition: like new (used), Roller coater Brand:Sorbini Type:T/20-MF No:MR1RFF21488 Year:2001 The T20 roller coater has been designed as an addition to SORBINI´S extended line of products. The machine is used for finishing flat boards in general with various types of coating products (e.g.polyurethane, polyester, acrylic and water-based finishes) The modular design makes it possible to obtain a wide range of applications which cater for all specific user requirements. Techn info: Working width max 1300mm Thickness of workpiece 0-80mm Feeding speed 3-20 m/min Feeding motor0,737kw Doctor roller motor 0,75kw Applicator roller motor 0,75kw Doctor roller diameter 174mm Applicator roller diameter 248mm Working hight 80 till 950mm Compressed air requirements 6 bar 9l/min Lodpfx Aefw Nc Ujbnsac Air pump pressure 2-10bar Air pump capacity at max pressure 30l/min of 10 bar Dimension 950x2550x1450mm (lengthxwidthxhight) Total weight 1220Kg Stock no:104326BXA

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 10362, Brand: Burkle Model: SLC Machine no: 10362-01 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Ljdev Hn N Ujpfx Abnjac Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002443BXM

Condition: ready for operation (used), Year of construction: 1998, Brand: Superfici Type: TU166-20+1UVM55 Machine no: 4632 Year: 1998 Max. width 1300 mm Lasdpjwax Tpsfx Abnsc Number of lamps 1+3 Control cabinet. Stock no: 2002484BXM

Condition: ready for operation (used), Year of construction: 1998, Brand: Superfici Type: TU166-20+1UVM55 Machine no: 4632 Year: 1998 Max. width 1300 mm Ledpfxowaydpo Abnsac Number of lamps 1+3 Control cabinet. Stock no: 2002484BXM

Condition: excellent (used), Year of construction: 2000, WIWA high-pressure pump 235.42R / 38042, year 2000 Laodpfx Aothcflebnsc With high delivery capacity, ideal as a feed pump for airless sprayers (suitable for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Transmission ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Delivery rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm The devices are very little used! Technically and visually in very good condition. ATTENTION: the price of EUR 1.900,- (net) is for 1 device !!!

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working width: 1,300 mm, transport length: 7,500 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, comprises: 1. CEFLA FEV E Dryer: LAMINAR AIRFLOW DRYER (ECOGEL E4/5) Type: SP-FEV E – 90 kW 2. CEFLA FEV EU Dryer: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU – 110 kW 3. CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU 4. CEFLA TR 3000 Roller Conveyor Laedpfx Aow H Aw Sobnec Heating medium – electric Installed electrical power for both dryers: approx. 210 kW --- 1. CEFLA FEV E Dryer: LAMINAR AIRFLOW DRYER (ECOGEL E4/5) Type: SP-FEV E – 90 kW The in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is equipped with a laminar hot air flow directed opposite to the panel feed direction and features adjustable recirculation air. • Total length: 7,500 mm • Working width: 1,300 mm • Total width: 1,783 mm • Max. drying height: 1,780 mm (conveyor excluded) • Useful pass-through height: 80 mm • Solvent-laden air exhausted externally: 0–4,000 m³/h • Machine control via 5.7" LCD touch panel • VS spark-proof supply/recirculation fan: – Power: 2.2 kW – Flow rate: 40,000 m³/h – Supply air into room: 0–4,000 m³/h – Installed heating capacity: 76,400 kcal/h (heating register 90 kW) --- 2. CEFLA FEV EU Dryer: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU – 115 kW The in-line hot air dryer is suitable for rapid evaporative and curing processes. This dryer is equipped with a laminar hot air flow in the opposite direction to the panel feed with adjustable recirculation air. • Total length: 7,500 mm • Working width: 1,300 mm • Total width: 1,783 mm • Max. drying height: 1,780 mm (conveyor excluded) • Useful pass-through height: 80 mm • Installed electrical power: 115 kW • Solvent-laden air exhausted externally: 0–4,000 m³/h • Machine control via 5.7" LCD touch panel • VS spark-proof supply/recirculation fan: – Power: 2.2 kW – Flow rate: 40,000 m³/h – Output electrical power: 1.5 kW – Supply air into room: 0–4,000 m³/h – Installed heating capacity: 76,400 kcal/h • PR antifreeze protection system for one heating register, with probe and automatic damper control --- 3. CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Drum cooling tunnel with air knives is highly efficient for achieving increased heat exchange due to high air velocity. The air handling unit consists of: - Supply and recirculation fan: 3 kW; Flow rate: 6,000 m³/h - Exhaust fan: 1.5 kW; Flow rate: 6,000 m³/h - Digital ventilation setting via touchscreen - Air knives installed across the entire tunnel width - Air knife exit speed max. 32.5 m/sec • Total length: 3,000 mm • Useful width: 1,300 mm • Total width: 1,783 mm • Pass-through useful height: 80 mm • Max. tunnel height: 1,780 mm (conveyor excluded) • Installed electrical power: 4.5 kW • Machine control via 5.7" LCD touch screen • TT 4000 bar conveyor with double chain, steel guides and chrome-plated bars --- 4. CEFLA TR 3000 Roller Conveyor • Powered rollers with PVC coating • Length: 3,000 mm • Photoelectric sensor for thin panels, thickness 4 mm (Specifications subject to change and errors excepted; prior sale reserved)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, working width: 1,250 mm, pass-through height: 80 mm, UV System Venjakob - IST LIGNOCURE HL 140-4-N-DL Year: 1999 (1990) POLYMERIZATION SYSTEM. Consists of 2 UV dryers: Dryer 1 Overall length: 2100 mm Overall width: 2339 mm Workpiece sizes: min. 250x20 mm, max. 2500x1000 mm Workpiece height: max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of IST lamps: 140 mm Rotating reflectors Lamp rating: each lamp 80 W/cm² Radiation length: 1400 mm Lamp power: 2 x 11.2 kW Air-cooled housing, output: 1600 m³/h (motor 1.2 kW) Compressed air consumption: 6 NL/h Belt conveyor Venjakob, year 1999, type Novo 40 Length: 2100 mm Working width: 1300 mm Working height: 880 - 920 mm Feed: 0.75 kW Feed speed: 4 – 20 m/min (line 2 - 4 m/min) Dryer 2 Overall length: 3340 mm Overall width: 2339 mm Workpiece sizes: min. 250x20 mm, max. 2500x1000 mm Workpiece height: max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of IST lamps: 140 mm Rotating reflectors Lamp rating: each lamp 80 W/cm² Radiation length: 1400 mm Lamp power: 2 x 11.2 kW Air-cooled housing, output: 1600 m³/h (motor 1.2 kW) Compressed air consumption: 6 NL/h Belt conveyor Venjakob, year 1999, type Novo 40 Length: 3340 mm Working width: 1300 mm Working height: 880 - 920 mm Feed: 0.75 kW Feed speed: 4 – 20 m/min (line 2 - 4 m/min) Common control cabinet for both drying tunnels: 2000 x 1600 x 600 mm Operating voltage: 400 V, AC, 50 Hz, 3-phase Total power consumption of the complete UV system approx. 50 kW Ljdpfx Aoyalc Nsbnoac Operating side of the system: left Total weight of the complete system: approx. 2500 kg (Technical data subject to change and errors excepted. Prior sale reserved.)

Condition: ready for operation (used), machine/vehicle number: 5981, Working height: 870 mm Working width: 1300 mm Conveyor belt width: 1270 mm Lasdpfx Abeyah Uzjnjc Conveyor speed: 6–30 m/min, infinitely variable Passage height: 3 mm – 80 mm 1 rubber-coated applicator roller, 238 mm diameter, coating 5 By 1 1 chrome-plated dosing roller, 174 mm diameter Electrical equipment: operating voltage 400 V, 50 Hz 3 phases Total connected load: 1.9 kW Motors and switchgear in EX-protected design Additional equipment: separate drive for the dosing roller, infinitely variable, with oscillating dosing blade Operator side: left Machine length: 1000 mm Weight: 1000 kg

Condition: excellent (used), Year of construction: 1997, Hurrican Dambauer complete paint spray booth system Ljdpjy Sv Aljfx Abnsac

Condition: used, pressure 3 - 6,5 kg / cm² bar rate of flow 26 l/min Lasdegvklijpfx Abnjc diameter of die - min./max. -- mm Ratio 73 : 1 rated current 1,65 KW weight of the machine ca. 100 kg dimensions of the machine ca. 730 x 760 x 1200 mm noise level 78 dB(A)

Condition: used, Year of construction: 2015, machine/vehicle number: 15-1-272, Technical specifications: Lajdpoykuz Aofx Abnoc - Manufacturer: Weger air solutions - Year of manufacture: 2015 - Model: ZL66 - Motor output: 1.27 kW - Length: 2,900 mm - Width: 705 mm - Height: 890 mm - Duct connection: suction 605x655 mm, discharge 605x560 mm - Heating medium: hot water PWW 70/50 - Airflow: 3,000 m³/h - Heating pipe connection diameter: DN 32 mm - Voltage: 230V - Location: in stock - Voltage fluctuation max. +/- 5%

Condition: good (used), Year of construction: 2021, working width: 400 mm, height adjustment type: electric, Roller application machine Manufacturer: Cosma Type: 400 RC Lasdpfxjy Ic Ums Abnsc Year of manufacture: 2021 2-roller application machine for applying oil With the Cosma roller application system, oils are applied to, among other things, solid wood floors (parquet), paneling, stairs, garden material, scaffolding wood, and wall decorations. Working width: 400 mm Suitable for workpieces: Thickness: 10 - 50 mm Working height: 900 mm Equipped with: - Dosing roller, 0.37 kW - Rubber-coated application roller, 0.37 kW, 25 Shore With electric height adjustment and mechanical height display Control panel for: Feed speed, amperes per roller, and roller height adjustment

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 014860, feed rate X-axis: 3 m/min, workpiece weight (max.): 10 kg, working width: 1,350 mm, total length: 3,000 mm, total height: 80 mm, working height: 900 mm, power: 25 kW (33.99 HP), compressed air connection: 6 bar, Equipment: cabin, We are offering this nearly new Bürkle ROBUS eco surface spraying machine, year of manufacture 2023. Laedpeyx H Eqjfx Abnsc

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, working width 430mm max height 100mm Ledpsy N N Sbefx Abnsac outfeed conveyor 3500mm variable regulated brushes speed variable regulated rolls speed year 2011

Condition: excellent (used), Painting-finishing line with spraying machine, for panels, max working width mm 1300 Dimensions of the line: max lenght 48 meters (ca.) x max width 10 meters (ca.) Composed of the following machines: a) Motorized belt transfer "CEFLA" Mod. TB3500 b) "SORBINI" brushing machine Mod. SmartClean 33-F, with upper brushes + air blowers c) Motorized belt transfer "CEFLA" Mod. TB4000-2V/CT, with plexiglass closure d) Automatic Spraying machine - NC "CEFLA" Mod. iBotic RU1WP, with 4 spraying guns + 1 spraying gun for panel edges e) Motorised belt transfer "CEFLA" Mod. TB4000-2V/CT, with Plexiglas enclosure f) Vertical oven "CEFLA" Mod. PIEFFE VL 6/7400, with 6 trays max length 7000 mm Ledjhbyr Sspfx Abnjac g) Motorized belt transfer "CEFLA" Mod. TR4000-CT, with Plexiglas closure h) Pressurised drying booth "CEFLA" Mod. GPAU/30 (6 x 10 metres - Kw 22.5) i) Pressurised spray booth (6 x 6 metres) with recirculating water spray booth l) Pressurized sanding booth (with 2 suction benches)

Condition: excellent (used), ROLLER COATER (REVERSE) Max working width mm 1300 Length of the machine mm 1600 approx Built-in Electric and command cabinet Feeding system by motorized rollers (power KW 0.75) Feeding speed adjustable (from 6 to 24 m / min) Total installed power KW 4,3 No. 2 working heads: * 1st head (with 2 rollers) Lajdpfxef E Npks Abnjc Chromium plated Dosing roller diam. mm 174 + Rubbered Spreading roller diam. mm 248, with 2 adjustable speed variators (power KW 0.37 + KW 0.75), with also a counter-placed (bottom side) reference rubbered roller * 2nd head (with 2 rollers) Chromium plated Dosing roller diam. mm 174 + Rubbered Spreading roller diam. mm 248, with 2 adjustable speed variators (power KW 0.37 + KW 0.75), with also a counter-placed (bottom side) reference rubbered roller

Condition: excellent (used), ROLLER COATER (REVERSE) Max working width mm 1300 Length of the machine mm 1600 approx Built-in Electric and command cabinet Feeding system by motorized rollers (power KW 0.75) Feeding speed adjustable (from 6 to 24 m / min) Total installed power KW 4.1 No. 2 working heads: * 1st head (with 2 rollers) Chromium plated Dosing roller diam. mm 174 + Rubbered Spreading roller diam. mm 248, with 2 adjustable speed variators (power KW 0.37 + KW 0.75), with also a counter-placed (bottom side) reference rubbered roller Lasdjidqwpepfx Abnsc * 2nd head (with 2 rollers) Chromium plated Dosing roller diam. mm 174 + Rubbered Spreading roller diam. mm 248, with 2 adjustable speed variators (power KW 0.37 + KW 0.75), with also a counter-placed (bottom side) reference rubbered roller

Condition: excellent (used), Roller PAINTING and FINISHING LINE (UV), max. working width mm 1300. Composed by: 01) cod. J05012) Sanding Machine "COSTA LEVIGATRICI" Mod. SN TR LFT 3 TT 1350 02) code Y11034) Roller Coater "SORBINI by CEFLA" Mod. SMARTCOATER MF-EVO 03) cod. Y11036) UV oven (1 lamp) "CEFLA" Mod. UV 2000 M1 - TT 2000 04) code Y11037) Roller Coater"SORBINI by CEFLA" Mod. SMARTCOATER M-1 AN 05) cod. Y11041) UV oven (2 lamps) "CEFLA" Mod. UV-R M20 06) code Y11061) Sanding Machine "COSTA LEVIGATRICI" Mod. SH3 TR TTTTR 1350 07) code Y11042) Roller Coater "SORBINI by CEFLA" Mod. SMARTCOATER MF-EVO 08) code Y11039) UV oven (2 lamps) "CEFLA" Mod. UV-R M2 09) code Y11035) Roller Coater "BURKLE" Mod. RCL-M 1300 (e.a.s.y. Coater) 10) code Y11043) UV oven (3 lamps) "CEFLA" Mod. UV-R M3 Lsdpfehyty Ajx Abnsac

Condition: excellent (used), ROLLER COATER with SINGLE SPREADING-COATING ROLLER Max working width mm 1300 Length of the machine mm 900 (ca.) Thickness of the panels (working height): mm 3 - 80 Adjustable feeding speed: m/min 5 -20 PLC control pane (Touch Screen) Telemecanique/Schneider Built-in electric and command panel Total installed power KW 2,9 Equipped with: 1°) Dosing unit (Chromium plated Doctor roller diam. mm 173, KW 0,75 ca.) 2°) Coating unit (Rubbered spreading roller diam. mm 250 (ca.) KW 0.75, with a rubbered bottom roller, counter-placed to the top one (diam. mm 182 ca., (ca.) KW 0,75) Ledpfxegz Swls Abnoac

Condition: excellent (used), ROLLER COATER with SINGLE SPREADING-COATING ROLLER Max working width mm 1300 Length of the machine mm 900 (ca.) Thickness of the panels (working height): mm 3 - 80 Lsdpfxegz Swwj Abnjac Adjustable feeding speed: m/min 4 -20 PLC control pane Separate (from the machine's body) electric and command cabinet Total installed power KW 8 Equipped with: 1°) Dosing unit (Chromium plated Doctor roller diam. mm 173, KW 0,75 ca.) 2°) Coating unit (Rubbered spreading roller diam. mm 250 (ca.) KW 0.75, with a rubbered bottom roller, counter-placed to the top one (diam. mm 182 ca., (ca.) KW 0,75)

Condition: ready for operation (used), working width 4 meters fan motor power 4 kW set includes cardboard filter and paint stop filter Italian made electrical panel Lasdpey Nikksfx Abnsc emergency stop button (STOP) filtration capacity 15,000 m3/h year of production 2022 CE marking

Condition: used, Rack trolley max. width 1700 mm Ljdpfx Aoy Nawbsbnoac depth 600 mm height 1800 mm 20 shelves mobile