Condition: used, Year of construction: 2008, - Manufacturer Efsen/Cefla - Type Woodcure 1400 Kledevupdcjpfx Amzjr - Year of manufacture UV 2008, transport/conveyor 1998 - Working width 1,300 mm (1,445) mm - Working height 870 + - 20 mm - Max. part height 70 mm - Number of tubes from above 2 pcs. - Straight tubes 2 pcs. - Tube power 120 W/cm - Suitable for mercury tubes - Suitable for gallium tubes - Manufacturer of transport system Cefla - With cross bar conveyor - Bar spacing 95 mm - Feed adjustable via hand wheel ~ 5-25 m/min - Installation length: 3,500 mm - Width: approx. 2,100 mm - Volts, Hz 400 /50 - Total electrical connection 38 kW - Voltage fluctuations max. +/- 5%

Condition: used, for installation on an existing bar conveyor. Kjdpfx Amjumvqcszjlr Includes: casing with 2 tubes, exhaust fan and control cabinet. Without conveyor

Condition: used, Year of construction: 2007, with light barriers in the inlet area, the dryer only switches on when parts are detected by the light barrier, otherwise the dryer is in energy-savingstandby mode with almost closed mirror halves. Operation via a Siemens panel. - Manufacturer: Venjakob - Type: VEN DRY UV 3D - Year of manufacture: 2007 Kedpou S N R Ejfx Amzslr - Operating side: right - Working width: 1.300mm - Max. Part height: approx. 100mm - Number of tubes: 2 pieces - Suitable for mercury and gallium tubes - 3D for edge drying - Tube power max. 120W/cm - Tube power infinitely adjustable 50-120Watt/cm - With standby mode- With belt conveyor - Feed rate: ~ 2.5 - 7.5m/min. - Length: 3,000mm - Bretie: 2.750mm - Total connection ~45KW - Location: in stock - Volt/HZ: 400/50

Condition: used, Year of construction: 2001, machine/vehicle number: 9646-11, - Manufacturer: Bürkle - Type: SLC - Year of manufacture: 2001 - Right-hand operation - For single-sided application of lacquer - Oscillating application roller squeegee Technical data: - Maximum working width: 1300 mm - Conveyor belt width: 1270 mm - Workpiece thickness 3 - 120 mm - Installation length: ~ 800 mm - Width: ~ 2,800 mm - 1 piece, rubberized application roller, approx. D: 238 mm - Application roller Shore hardness: 45 (can be changed) Klodpfx Aoyifwismzjr - 1 piece, chrome-plated metering roller, D: 174 mm - 1 piece, counterpressure roller, D: 186 mm - Transport speed, adjustable from approx. 6 - 30 m/min. - Working height ~ 900 mm - Passage height approx. 3 - 80 mm - Compressed air 6 bar, G1/4 inch, approx. 50 NL/min. - Operating voltage 400 V, 50 Hz, 3 phases - Total connected load approx. 2 kW - With control cabinet - Weight approx. 1,400 kg - Location: in warehouse 32825 Blomberg

Condition: used, Year of construction: 2005, machine/vehicle number: A0407004, - Producer Venjakob - Type. VEN SPRAY DUO/C CNC 6000 - year of construction 2005 - Working width 1300 mm - Operating side right - Price for overhauled machine - Actual condition, machine not overhauled - Pistol drive in duo version - Dry extraction system - Extraction nozzle diameter 500 mm - Exhaust air capacity 10,000 m³/h - Belt conveyor system - Infinitely variable feed speed ~ 2 - 7.5 m/min - With belt cleaning system - With paint recovery via V-belt system - Gun control, touch screen CNC- Kljdpfsumvu Ujx Amzor Installed colour circles 2 pcs. - Quick-change system for spray guns - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated in machine - Total connection ~ 29 - Volt, Hz 400 / 50 - Colour RAL 7035- Location, in stock - Voltage fluctuations max. +/- 5 % Picture shows an example of a reconditioned automatic machine _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!

Condition: used, Year of construction: 2017, machine/vehicle number: A1711012, Pos.1 VEN CLEAN Smart dedusting systemCompressed air dedusting for cleaning the workpieces to be painted from dust on profiled workpiece surfaces. Kledpfsu U Ryyjx Amzer Five rotating blowing stars are installed. These remove the dust from the surface. The loosened dust is extracted on both sides by suction shafts. on both sides. An external extraction system is required on site. Technical data: Roller transport length: 2,060 mm Roller pitch: 85 mm Working width: 1,300 mm Total width: 1,800 mm Drive power: 0.25 kW Exhaust air volume: 4,000 m³/h To be provided by the customer Compressed air consumption: 980 Nl/min. Ionisation as nozzle bar, not EX) with compressed air nozzles, Compressed air consumption 840LN/min. Pos. 2 Automatic spray gun VEN SPRAY Comfort- Manufacturer Venjakob - Type. VEN SPRAY Comfort CNC 7000 - Year of construction 2017 - Working height approx. 930mm+-20mm - Working width 1300 mm - Operating side left - Price for overhauled machine - Actual condition, machine not overhauled - Gun drive in duo version - Dry extraction system - Extraction nozzle diameter 500 mm - Exhaust air capacity 10.000 m³/h - Belt conveyor system - Infinitely variable feed speed ~ 2-6 m/min - With belt cleaning system with doctor blade in tungsten carbide design - With option to install a second beltcleaning system. Software and electric parts inside. - Gun control, touch screen CNC7000 - Installed colour circles 1 pc. (optionally more possible) - Supply air filter cover - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet, free-standing - Length: 4.350 mm + (2,060 mm) - Width: 3.540 mm - Height: 2.600 + 440 mm - Volt, Hz 400 / 50 - El. Power 23,33kW / 63A - Colour RAL 7035 - Location, in stock Voltage fluctuations max. +/- 5 % _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Year of construction: 2004, machine/vehicle number: 02919475, - Manufacturer Cefa - type. KLEENSPRAY - Year of construction 2004 - Operating side left - Working width 1.200 mm - Working height 900 mm + - 20 mm - Gun drive single version - Dry extraction - Extraction nozzle diameter 490 x 350 mm - Exhaust air capacity 6,500 m³/h - Paper belt transport system - Infinitely variable feed speed 1.5 - 7 m/min - PLC control with touch screen Kljdpfxev N D Ewe Amzsr - Number of spray guns installed 0 pcs. - Height-adjustable spray guns - Number of paint pumps 0 pcs. - Suitable for solvent-based paints - Suitable for water-based paints - Length 4,450 mm - Width 3,360 mm + 1000 mm - Height 2,600 mm - Total connection ~ 7.1 kW / 28.6 A - Volt, Hz 400 / 50 - Location, in stock - Voltage fluctuations max. +/- 5 _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Year of construction: 2014, machine/vehicle number: DB4078Q02A, The pictures show the machine in its unrefurbished condition. The offer price refers to a partially refurbished, functional machine. - Manufacturer: Cefa/Sorbini - Type: SMARTCOATER REVERSE MF-EVO - Two application units, one in REVERSE - Roller running directions shown in picture 10 - Year of manufacture: 2014 - Working width: 1,300 mm - Working height: 880 mm - 940 mm - Workpiece height ~ 3 - 80 mm - Operating side: left - Paint application shaft 50 - 60 Shore - Roller diameter: 250 mm - Metering roller: 173 mm - Double diaphragm pump 1 piece for both application machines - Transport system with roller conveyor - Roller conveyor pitch: 150mm - Roller diameter: 100mm - Compressed air connection: 6 bar - Compressed air consumption: 54 NL/min. - Machine length 900 mm - Machine width 3,000 mm - Machine height 1,500 mm - Mobile on flanged rollers - Feed speed ~ 4 - 20 m/min - Application quantity ~ 4 - 50g/m² - Machine weight 2,520 kg - Control cabinet on the machine, traveling with it Klsdpjyatd Isfx Amzer - With chassis - Total power 5.4kW / 30A - Volts, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Location: in storage

Condition: used, Year of construction: 2000, machine/vehicle number: A 00 12 006 / 0100, with new ASCOM gunl control, PLC, light curtain, and touch panel, mounted at the inlet of the automatic sprayer. - Manufacturer: Venjakob - Type: VEN SPRAY Duo - Retrofit 2026 (year of manufacture: 2000) - Working width: 1300 mm - Right-hand operation - Price for reconditioned machine - Current condition, in the reconditioning phase - Duo pistol drive - Dry extraction - Exhaust air capacity 10,000 m³/h - Extraction nozzle diameter 500 mm - Belt conveyor system - Feed speed approx. 5 and 14 m/min - With belt cleaning system - With paint recovery via V-belt system - Gun control, touch screen - Installed color circles 1 pc. - 4 Airelss sprayers, Krautzberger KAA1300 - 1 HD airless pump - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated into the machine. - Total connection ~ 19kW - Length: 6,485mm - Width: 3,690 mm - Height: 2,497 mm - Volts, Hz 400 / 50 - Color light gray 7035 + black - Location, in stock - Voltage fluctuations max. +/- 5% The photos show only one example of a refurbished automatic sprayer. _____ Klsdpfx Amox Ihvpozor Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Year of construction: 2013, machine/vehicle number: A1312006-0030, - Manufacturer Venjakob - Type VEN DRY OIR 38/40 - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Length of exhaust duct 3,800 mm - Supply air capacity 100 m³/h - Exhaust air capacity ~ 500- 1000 m³/h - Recirculated air capacity ~ 3,000 m³/h Klodpfxoxfkbae Amzjr - Max. Drying temperature ~ 30 degrees - Air velocity 0.5 - 2 m/s - IR emitters 12 pcs. - IR heater output 12 x 1.5 kW - Belt conveyor, length 4.000 mm - Location, at the warehouse - El. Power 20KW / 63A - Volt, Hz 400/50 - Voltage fluctuations max. +/- 5 % - Control cabinet with touch screen display

Condition: used, Year of construction: 2005, - Manufacturer: Cefa - Type: KLEENSPRAY - Year of manufacture: 2005 - Working width: 1,200 mm - Working height: 900 mm + - 20 mm - Operating side: right - Price for reconditioned machine - Gun drive: Duo version - Height-adjustable sprayers - Dry extraction - Extraction nozzle diameter 490 x 350 mm - Exhaust air capacity ~ 6,500 m³/h - Paper belt transport system - Feed speed continuously adjustable 1.5 - 7 m/min - PLC control with touch screen - Number of sprayers installed 0 Kodpfsxnbhvex Amzjlr - Number of paint pumps 0 - Suitable for solvent-based paints - Suitable for water-based paints - Length 4.300 mm - Width 3.360 mm + 1.850 mm - Height 2.700 mm - Total connection ~ 7.1 kW / 28.6 A - Volts, Hz 400 / 50 - Location, in stock - Voltage fluctuations max. +/- 5% _____ Optionally, we can also provide you with a quote for assembly and commissioning of the system, as well as training for employees. On request, we also offer regular maintenance and servicing of the machine. For further information, please contact us!

Condition: used, Year of construction: 2008, machine/vehicle number: 0117580020, Printing machine for non-synchronized printing of wood grains or other designs from above on flat workpieces in one-colour printing, suitable for aqueous and UV printing inks. - Type: SLDR 1300 - Year of manufacture: 2008 - Operating side: right - Workpiece width: 1.250mm - Min. workpiece length: 350mm (300mm) - Workpiece height: ~ 3-100mm - Suitable for printing ink, water-soluble and Kljdpfxswhp Dzs Amzsr UV printing inks Transport system: - Conveyor belt width: 1,230mm - Max. Production speed: 10m/min. - Feed speed: 8-25m/min. - Rubber coating 60Shore (6By1) - Diameter 186mm Application unit: - Rubber coating 50Shore (5by1) - Diameter: 238mm - Engraving cylinder, diameter: 174mm - Separate, infinitely variable FU direct drive for engraving cylinder and application roller. Engraving roller: - Diameter - circumferential speed Machine dimensions: - Installation length: 800mm - Working height approx. 900mm +-20mm - Width: ~ 2.700mm - Electrical connected load: 5kW - Weight: approx. 1.400kg - Location: in stock

Condition: used, Year of construction: 2008, Spraying machine CEFLA FINISHING EASY 2000 DUO D Pictures are only sample - Producer Cefla - Type EASY-DUO - Year of construction 2008 - Working width 1300 mm - Operating side, left - Prize for overhauled machine - Actual condition, machine is not overhauled - Duo gun drive system - Dry filter system - Exhaust air 12.000 m³/h - Transport belttransport System Kjdpfx Asqhquwomzslr - Feed speed adjustable 2 - 8 m/min - Belt cleaning system with roller - Lacquer reclaiming system with v-belt - Number of installed lacquer circles 2 Stk. - Number of installed spraying guns 4 Stk. - spray gun type Kremlin AVX - Airmix spraying system - Height adjustment for spraying guns - Number of lacquer pumps 1 Stk. - Producer lacquer pump Kremlin 16-120 - Supply air box - Ex-prevention - Suitably for solvent based lacquer - Suitably for water based lacquer - Used machine, good condition - Length ca. 6152 mm - Width 3.700 mm - Height 2.895 mm - Total connection power 18 KW - Location, on stock - Voltage fluctuation max. +/- 5 % _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!

Condition: used, Year of construction: 2008, - Producer Printworld - Type PUVD 1600-2 - Year of construction 2008 - Working width 1.600 mm - Working height 1.030-1.050 mm - Max. part height 25 mm - Operationside left - Number of lamp from top 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 120 W/cm - Selective shiftable 60 / 90 / 120 W/cm - Conveyor with netbelt - Feed speed adjustable 2 - 50 m/min Kjdpfxoumvkco Amzolr - Installation length 3.300 mm - Machine measure 3,3 x 2,5 x 1,8 m - Location - Voltage / HZ 400 / 50

Condition: used, Year of construction: 2001, machine/vehicle number: 5358, - Manufacturer Elmag Superfici - Type. TWIN SPRAY - Year of manufacture 2001 - Working width 1,300 mm - Working height 890 mm + - 20 mm - Operating side right - Price for overhauled machine - Gun drive in duo version - Dry extraction - Exhaust air output 8,000 m³/h - Belt transport system - Belt cleaning via roller cleaning system - With belt cleaning system - Belt cleaning, behind the machine, in the direction of travel, - With paint recovery - Gun control - Number of installed spray guns 4 pcs. - Spray guns type. Kremlin ATX - Airmix spray system - Supply air filter ceiling - Length 5,950 mm - Width 3,980 mm - Height 2,790 mm - Total connection 21 KW, 40 A - Volt, Hz 400 / 50 - Location, in stock _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. Kledoumvk Aspfx Amzsr We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!

Condition: used, Year of construction: 2016, machine/vehicle number: 9960-10-1059, techncal data: - Producer: Printworld - Type. 3D - PUVD 1300 - Working width: max. 1.300 mm - UV-lamp length: 2 x 1.600 mm arc length - Curing systems: 2 pcs of curing systems from top + 1 pcs curing system from down under - UV- power regulation: UV- lamps are able to be individually controlled (30% -100%) - Reflector: Printworld Multifocal –Reflector - Conveyor transport width: 1.400 mm - Total lengths: 4,5 m - Conveyor speed: 3 – 20 m/min - Substrate passage height: 60 mm, max. (option higher) - Execution conveyor belt: PTFE Fiberglass mesh conveyor belt, anti-static coated - Conveyor speed regulation: Infinitely variable with digital control and monitoring - Conveyor adjustment: Conveyor belt guiding system - Conveyor belt drive: Stepper motor with variable speed conveyor belt and digital - control and monitoring - UV radiation protection: Built in on the machine frame Kedou Abn Tspfx Amzjlr - Energy Saving: Automatic standby circuit with power reduction about 10% - Operation / control: Schneider Modicon M258 Logic Controller processor with Magelis colour touch screen - Inlet height: 850 – 900 mm or by appointment) - Outlet height: 850 – 900 mm (or by appointment) - Electrical connection: 400V~, 50 Hz, 3- Phases +N +PE - Current 135A - Location: on stock

Condition: used, Year of construction: 2001, machine/vehicle number: 9646-27, - Manufacturer: Bürkle - Type: SLC - Year of manufacture: 2001 - Operating side: left - For single-sided application of lacquer - Oscillating application roller squeegee Technical data: - Maximum working width: 1.300 mm - Minimum workpiece length: 350 mm - Maximum workpiece weight: 250 kg - Conveyor belt width 1.270 mm - Workpiece thickness 3 - 100 mm - Machine length: 800 mm - Machine width: 3.200 mm - Application roller, rubberized, EPDM approx. D: 238 mm - Application roller Shore hardness: 45 (can be changed) Kledpfjykuzvjx Amzor - Metering roller, chrome-plated, D: 174 mm - Counterpressure roller, rubberized, D: 186 mm - Conveyor speed, adjustable from approx. 8-25 m/min. - Working height ~ 900 mm + - 30 mm - Clearance height approx. 3 - 80 mm - Compressed air 6 bar, G1/4 inch, approx. 50 NL/min. - Operating voltage 400 V, 50 Hz, 3 phases - Total connected load approx. 5.5 kW - With control cabinet - Weight approx. 1.450 kg - Location: in stock 32825 Blomberg

Condition: used, Year of construction: 2008, Infrared dryer, consisting of: Module 1: - 3 IRM lamps with a power of 3500 watts/lamp - Structure made of painted sheet metal. - Installed electrical power 10.5 kW Module 2: - 2 IRM lamps with a power output of 3,500 watts/lamp - Structure made of painted sheet metal. - Installed electrical power 7.0 kWTotal connection approx. 19.5 kW/400 V/50 HzExhaust air: - Exhaust air fan approx. 1,800 m³/h - Supply air/room air approx. 1,800 m³/h - Extraction nozzle D160mm ROLLER CONVEYOR - Celfa - Year of manufacture 2008 Kodpfx Amowub Uxozslr - Steel rollers with heat protection tape wrapped around - Roller spacing 160 mm - Feed via hand wheel adjustment - Installation length 2,000 mm - Feed approx. 3 - 7.5 m/min. - Including control cabinet - 400V/50Hz

Condition: used, Year of construction: 2018, Technical data: Pos.1 - Dedusting VEN CLEAN Smart - Working width: 1,300mm - Length: 1,060mm - Roller transport: 1,000mm - Extraction fan 4,000m/h - Compressed air 980Nl/min. - Deduster Air nozzles - With ionisation Pos.2 - Automatic spray gun VEN SPRAY PERFECT - Year of construction 2018 - Working width: 1,300 mm - Working height: 940 mm +-20 mm - Part detection via light curtain Ksdjvvbqqopfx Amzjlr - CNC 7000 control unit - Operating side right - Gun drive in Duo version Z16 - Dry extraction with filter - Extraction nozzle diameter 500 mm - Exhaust air capacity 10,000 m³/h - External filter box, LxDxH: 3500x1280x2740mm - Paint recovery system via V-belt - Infinitely variable feed speed 2 - 6m/min - Installed spray circuits 2 pcs. - Gun arm quick-change system, 1pc. - Number of spray guns installed 4 pcs. - Number of material pumps 1pc. - Supply air filter cover G5 - Length ~ 6,590 mm - Width 3,666 mm (+1152mm) - Height 2.500mm - Total connection 21 KW - Volt, Hz 400 / 50 - Colour RAL 7035 - Location, from 01/2025 in stock - Voltage fluctuations max. +/- 5% _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, working width: 1,250 mm, pass-through height: 80 mm, UV System Venjakob - IST, Model: LIGNOCURE HL 140-4-N-DL Year: 1999 (1990) POLYMERIZATION SYSTEM Consisting of 2 UV dryers: Dryer 1 Total length: 2100 mm Total width: 2339 mm Workpiece dimensions: min. 250 x 20 mm, max. 2500 x 1000 mm Workpiece height: max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of IST lamps: 140 mm Rotating reflectors Lamp rating: per lamp 80 W/cm² Length of irradiation: 1400 mm Lamp output: 2 x 11.2 kW Air-cooled housing, capacity: 1600 m³/h (motor 1.2 kW) Compressed air consumption: 6 NL/h Conveyor belt Vanjakob, Year: 1999, Type Novo 40 Length: 2100 mm Working width: 1300 mm Working height: 880 - 920 mm Feed drive: 0.75 kW Feed speed: 4 – 20 m/min (Line 2 - 4m/min) Dryer 2 Total length: 3340 mm Total width: 2339 mm Workpiece dimensions: min. 250 x 20 mm, max. 2500 x 1000 mm Workpiece height: max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of IST lamps: 140 mm Rotating reflectors Lamp rating: per lamp 80 W/cm² Length of irradiation: 1400 mm Lamp output: 2 x 11.2 kW Air-cooled housing, capacity: 1600 m³/h (motor 1.2 kW) Compressed air consumption: 6 NL/h Conveyor belt Vanjakob, Year: 1999, Type Novo 40 Length: 3340 mm Kodpfx Amoyalc Nozslr Working width: 1300 mm Working height: 880 - 920 mm Feed drive: 0.75 kW Feed speed: 4 – 20 m/min (Line 2 - 4m/min) Shared control cabinet for both drying tunnels: 2000 x 1600 x 600 mm Operating voltage: 400 V, AC, 50 Hz, 3-phase Total output of the complete UV system: approx. 50 kW Operating side of the system: left Total weight of the complete system: approx. 2500 kg (Subject to changes and errors in the technical data, as well as prior sale)

Condition: excellent (used), Year of construction: 2002, I sell the 2-head 2-lamp UV-drying tunnel Cefla TLE/B/2+TTE 2500 Kodpfst S Efgsx Amzjlr Year 2002 Working width 1400mm. Total length 2,50m 2 Lamps HG 120 W + HG 120 W Total power 37,7 kW Very good condition, available immediately.

Condition: excellent (used), Year of construction: 2005, I sell the combined tunnel for surface finishing Superfici Elmag Combiline. Configuration: 1-head roller coater Cleaning unit with dust exhaust system Kjdpfxeiuc R Hs Amzelr 2-head UV-drying tunnel Cleaning unit with dust exhaust system Model: Combiline. Working width: 1500mm Year 2005. Working hours: 4600 mthrs. Total length: 5,30m Total width: 2,40m Weight: 4000kg Available immediately. Fully working.

Condition: excellent (used), Year of construction: 1996, I sell the 1-cylinder roller coater BURKLE SAL. Kljdst S Eb Uopfx Amzjr Working width 1300mm Very good condition. Fully working. Available immediately.

Condition: excellent (used), I sell the 2-cylinder roller coater Superfici Elmag FVR. Working width 1400mm Very good condition. Fully working. Available immediately. Klsdpfx Amsiuc R Rezsr

Condition: excellent (used), Year of construction: 1998, I sell the 1-cylinder roller coater BURKLE SAL1300. Kljdji Euqqopfx Amzor Working width 1300mm Very good condition. Fully working. Available immediately.