Condition: excellent (used), Year of construction: 2004, Used Kia Model Kia Centre H63 Twin Pallet Horizontal Machining Centre with 60 Station ATC and Fanuc 18M Control. Serial Number KH630216. Year of Manufacture 2004. MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle • Shuttle Type Pallet Changer • Pre-Tensioned Double Anchored Ballscrews • Fanuc 18M Control with 15 Inch Colour Screen • 20 Bar ‘Cool-Jet’ Through Spindle Coolant • Set of BT50 Toolholders Bledpfx Aaju A Ut Njqop • Filtermist FX5002 Mist Filtration • Frontal and Side Operators Platforms TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM 0bwkk Minimum Index Angle 1° FEED X-Axis 950 MM Y-Axis 825 MM Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper NT #50 Spindle rpm 4,500 RPM Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEARED HEADSTOCK FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Tool Type BT #50 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Voltage 415V / 3PH / 50HZ MACHINE Floor Space (L x W) 3,610 X 5,320 MM Height 3,140 MM Weight 14,000 KGS

Condition: used, Year of construction: 2008, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Siemens 840D powerline spindle tunring speed 8.000 U/min drive capacity - main spindle 100/40% ED 32/44 kW tool taper HSK-A 100 Bedpfx Aaoxcp R Ujqolp number of tool places 354 Pos. rapid traverse ( x / y / z ) 60 m/min size of pallet 800 x 800 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features: - NC rotary table with pallet carrier - Rotary pallet changer - 40 bar internal coolant supply - Rotating viewing window - Wall-mounted magazine with 300 magazine positions - Rotating wall tool lock, 30 positions (inactive) and 54 positions (active) - Infrared measuring probe - SK 50 mechanical tool breakage detector - Tool identification - 4-color signal lamp Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), Year of construction: 2012, Lot consists of: (1) CNC 4-Axis Horizontal Machining Center Position besteht aus: (1) CNC Horizontal-Bearbeitungszentrum Technical Details/Technische Details: English: Pallet Changer: -> included Spindle: -> Tool holder HSK63 -> Speed 20,000 rpm Linear Axes: -> X-axis 750 mm -> Y-axis 750 mm -> Z-axis 725 mm Tool Changer: -> 60 stations This Machine used one single Cooling Unit with another Machine (Lot 2770012). The Cooling Unit (Lot 2770249) is offered separately.This Machine does NOT include a Cooling Unit. Bljdpfx Aexrngaeaqep Machine/Asset does not include any Product related Tool/Fixture or Gripper (Robot) Spindle Hours approx. 25.600 Working Hours approx. 44.900

Condition: used, Year of construction: 2008, machine/vehicle number: 1160821, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Machine No.: 166 0821 Year of manufacture: 2008 Used, ready for operation Travel axes: X-axis 600 mm Y-axis (alternate position) 600 (975) mm Z-axis 500 mm Control: Siemens 840D control, side-mounted Feed / rapid traverse speed: X, Y, Z 1 – 45,000 mm/min Max. feed force X, Y, Z 15,000 N Average acceleration: X, Y, Z 2.5 m/s² Measuring system: Absolute linear measuring system X, Y, Z Spindles: Spindle speed (stepless) 20-10,000 rpm Torque 2 x 363 Nm (S6/40%ED) Power 2 x 38 kW (S6/40%ED) HSK-A 100, horizontally arranged side by side Spindle center distance 600 mm Spindle bearing diameter 100 mm Motor spindles, liquid-cooled, AC technology Working area: Blsdpfxexqrvvj Aaqsp Swing-arm carrier with straight-toothed gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec Partition wall between machining and loading area Tool magazine: 2 x 40 tool HSK-A 100 chain magazines, position-coded Automatic pickup Tool change time (chip-to-chip): 4.9 sec Max. tool diameter 100 mm 250 mm if adjacent pocket is empty Max. tool length 350 mm Max. tool weight 20 kg Equipment: Central lubrication Minimum quantity oil lubrication (spindle lubrication) Chip conveyor Connection for central coolant system Hydraulic system Service unit Water recooler Fully enclosed; crane loading possible Dimensions with paper band filter: approx. 5.15 x 8.50 x 4.20 m Weight approx. 20,000 kg Dimensions without paper band filter: approx. 5.15 x 6.60 x 4.20 m Other details: - Condition appropriate for its age - Annual maintenance was regularly performed by the previous owner --- Machine is sold without clamping devices --- --- without foundation parts --- Immediately available, timing by arrangement EXW 72793 Pfullingen Dismantled into main components Transport to site by the customer/buyer! Dimensions/transport dimensions of main machine components: 1 pc. machine unit (X, Y, Z) mm 3800 x 3350 x 3400 approx. 13,000 kg 1 pc. table unit mm 4400 x 2400 x 3400 approx. 10,000 kg Additionally, peripheral equipment such as chip conveyor, small parts, sheet metal, etc. Short delivery time possible! Schedule by arrangement.

Condition: ready for operation (used), Year of construction: 1997, General Data Measurements width 4500 mm Measurements depth 2900 mm Measurements height 3428 mm Machine weight 14000 kg Main Drive Number of axis 4 Movement X-Axis Movement 630 Y-Axis Movement 600 Z-Axis Movement 650 Additional Equipment Tool Storage: 40 pcs This 4-axis MORI SEIKI SH-50 was manufactured in 1997. A reliable horizontal machining centre, it offers robust construction and precision engineering. Ideal for complex machining tasks, this unit has maintained consistent performance over the years. Consider the opportunity to buy this MORI SEIKI SH-50 horizontal machining centre. Contact us for more information. Bsdpfx Asxpyuksaqelp Application Types Milling

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Bledpoxm Sxvjfx Aaqsp Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: like new (used), Year of construction: 2007, HYUNDAI WIA KH63G - YOM 2008/ FIRST INSTALLED 2010 - SERIAL NUMBER G3641-071 MACHINE CONSTRUCTION & FEATURES • Twin Pallet Horizontal Machining Centre. • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle. • Shuttle Type Pallet Changer. • Pre-Tensioned Double Anchored Ballscrews. TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM Minimum Index Angle 1° FEED X-Axis 950 MM Y-Axis 825 MM Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper #50,DIN 69871 Spindle rpm 4,500 RPM Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEAR FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Tool Type ISO 50, DIN69871 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Blodeu A Td Topfx Aaqsp Voltage 415 V / 50 HZ / 3PH MACHINE Floor Space (L x W) 3,530 X 5,320 MM Height 3,106 MM Weight 14,000 KGS STANDARD SUPPLIED MACHINE FEATURES • Total Splash Guard • Door Interlock • APC (2 Pallets) • Remote MPG • Coolant Tank • Internal Chip Conveyor (2 Sets) • Work Light • Tapped Holes in Pallets • Levelling Pads and Bolts • Operation/Programming Manuals • Call Light • Selection of Spindle Tooling

Condition: as good as new (ex-display), Year of construction: 2024, travel distance X-axis: 1,050 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,030 mm, OKK Horizontal Machining Center, 1 unit HM6300 FANUC 31-B BT50 12,000rpm (MS), 45/30/26kW, 60-tool magazine (MG) 2APC Rapid traverse: X & Z at 75 m/min, Y at 54 m/min CTS (Through-Spindle Coolant) preparation High-pressure unit (70 bar) Tool breakage detection in MG, contact type Lift-up chip conveyor – hinge type for steel (Type A) SOFT AC adaptive control function Bjdpfxexuhzpj Aaqolp FASTEMS interface (excludes front door) Automatic restart upon tool damage Custom macro interrupt 116-tool magazine (60 tools x 2 lines) BIG PLUS spindle Manual Guide i: milling animation Oil skimmer Memory: total 1,280 MB (512KB) per program, up to 1,000 programs Extended parts program editing Run hour & parts counter display Tool life management (256 sets) Work coordinate system (48 sets) Custom macro B, 82 variables Helical interpolation Tool offset (200 sets)

Condition: excellent (used), Year of construction: 2011, Lot consists of: (1) CNC 4-Axis Horizontal Machining Center Position besteht aus: (1) CNC Horizontal-Bearbeitungszentrum Technical Details/Technische Details: English: Pallet Changer: -> included Spindle: -> Tool holder HSK63 -> Speed 20,000 rpm Linear Axes: -> X-axis 750 mm -> Y-axis 750 mm -> Z-axis 725 mm Tool Changer: -> 60 stations This Machine used one single Cooling Unit with another Machine (Lot 2770012). This Machine does NOT include a Cooling Unit. Blsdpfx Asxrnfceaqsp Machine/Asset does not include any Product related Tool/Fixture or Gripper (Robot) Spindle Hours approx. 26.000 Working Hours approx. 50.500

Condition: ready for operation (used), Year of construction: 2005, operating hours: 12,976 h, functionality: fully functional, machine/vehicle number: NSO997, travel distance X-axis: 750 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller model: FANUC Series 30i, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Bodpexqmbgjfx Aaqslp Travel (X-axis): 750 mm Travel (Z-axis): 800 mm Travel (Y-axis): 850 mm Magazine Positions: 120 Spindle Speed Range: 50–15,000 rpm Spindle Diameter (Front Bearing I.D.): 80 mm Spindle Taper: ISO R297 / Taper No. 40 Tool Holder: MAS I Type P40T Table Pallet Size: 550 × 550 mm Max. Rotary Table Swivel Range: 360° Pallet Height: 750 mm Distances Distance Between Spindle Nose and Table Center: 150–1,000 mm Distance Between Spindle Nose and Table Surface: 50–850 mm Feed Rates Rapid Traverse X-, Y-, Z-Axis: 60,000 mm/min Cutting Feed Rate (X-, Y-, Z-Axis): 0.001–30 mm/min Tool Changer (ATC) Number of Tools: 40 Tool Size (Ø × Length): Ø75 × 470 mm Tool Weight: 8.0 kg Tool Change Time (Tool to Tool): 1.3 s Performance Data Positioning Accuracy (X-, Y-, Z-Axis): ±0.003 mm Repeatability (X-, Y-, Z-Axis): ±0.0015 mm Pallet Load Capacity: 800 kg Thrust Force: 9,800 N MACHINE DETAILS Control: FANUC Series 30i Space Requirements & Weight Footprint: 2,750 × 5,700 mm Machine Weight: 16,000 kg Motors Spindle Drive Motor (15 min rated power): 22 / 18.5 kW Hydraulic Pump Motor: 3.7 (4) kW Operating Hours Machine Running Hours: 12,976 h Control Powered Hours: 112,997 h

Condition: ready for operation (used), Year of construction: 2017, Control Unit Brand SIEMENS Model 840D sl Operate with CELOS® Movement X-Axis Movement 560 mm Y-Axis Movement 560 mm Z-Axis Movement 660 mm Media Chip conveyor Yes Additional Equipment Two pallets with threaded holes Tool breakage control system in the tool magazine Signal light (red, yellow, green, blue) Automatic turning APC with 2 stations Direct distance measuring system Rotating viewing window in the work area door Coolant rinsing gun I/F for oil mist separator Knoll KF110/700 compact filter system Spindle sensor measuring system with optical signal transmission / Cooling unit for spindle This 4-axis DMG MORI NHX 4000 was manufactured in 2017. A robust horizontal machining center, it features a travel range of 560x560x660 mm and a clamping surface of 400x400 mm. The spindle was completely overhauled in May 2023. It has a tool magazine with 60 slots. The tool Holder is HSK 63 HSK-A63 motor spindle and the spindle speed range is 20 - 20,000 min-1. The machine includes a CELOS® control system with Siemens 840D sl Operate, enhancing usability with a multi-touch screen. For more information about this horizontal machining center, please reach out to us. Bledpfx Aaoxr Rxxsqep Application Types Milling

Condition: ready for operation (used), controller manufacturer: Fanuc OM, total height: 3,240 mm, total length: 4,100 mm, total width: 6,850 mm, empty load weight: 18,000 kg, additional equipment features: yes, Type: ACE-H80 X-axes: 1250 mm Y-axes: 1000 mm Z-axes: 1000 mm Blsdpjwttrmefx Aaqsp Table dimensions: 800 x 800 mm Max weight on the table: 2000 kg Admission in spindle (ISO): ISO 50 Power on the spindle: 25 kW Number of axes: 4 axes: X,Y,Z,B Toolstore: yes Tools: 90 positions Frequency: 20 -> 4500 rpm Number of pallets: 2x Power principal motor: 70 kva Cooling-system: yes

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT Bsdpfx Aaou Dahnsqjlp High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: repair required (used), Year of construction: 2009, functionality: not functional, travel distance X-axis: 7,400 mm, travel distance Y-axis: 1,460 mm, travel distance Z-axis: 620 mm, 7.4 Mtr 4-Axis machining centre for sale as spares or repair. X-Axis travel 7400mm, Y-Axis travel 1460mm, Z-Axis travel 620mm, A-Axis +/- 90 deg, Electrospindle power 5.5kw. Pros: New spindle in head in last 5 years, new clipper unit in last 5 years, many new cables in last 12 months. Cons: Head doesn't move and we've been told it could be the motor but this isn't 100% guaranteed. This will be sold as seen with no guarantee. Any inspection is welcome. The perimeter soundproof cabinet IS NOT included in the sale. The buyer will be responsible for the removal and transportation from our premises. Blodpfx Asw Nwrujaqop Please note: Price advertised is + VAT.

Condition: excellent (used), Year of construction: 2013, Pallet Changer: -> included Spindle: -> Tool holder HSK63 -> Speed 20,000 rpm Linear Axes: -> X-axis 750 mm -> Y-axis 750 mm -> Z-axis 725 mm Tool Changer: -> 60 stations This Machine comes with a Coolant Filtration System with Chiller • Manufacturer: KNOLL Maschinenbau GmbH / HYFRA Industriekühlanlagen GmbH • Type: PF 210 (Knoll) + TRK30-EF-S (Hyfra Pedia) Blsdpfxsxrlzhs Aaqjp • Year of Manufacture: 2012 • Serial Numbers:  - KNOLL: 501973 / 201139433  - HYFRA: 12030089 • Electrical Connection: 3×400 V / 50 Hz • Control Voltage: 24 V DC • Power Consumption: 11.1 kW (Knoll) + 4.8 kW (Hyfra) • Fuse Protection: 16 / 25 A (Knoll), 16 A (Hyfra) • Cooling Capacity (Chiller): 3.8 kW at 42 °C • Refrigerant: R134a, 1.6 kg • Max. Pressure: 20 bar • Weight (with coolant): 140 kg Machine/Asset does not include any Product related Tool/Fixture or Gripper (Robot) Spindle Hours approx. 9.300 Working Hours approx. 45.500

Condition: good (used), Year of construction: 2007, Ref. -No.: 10357 Manufacturer: STARRAG HECKERT Type: HEC 630 Athletic Year of construction: 2007 Type of control: CNC Steuerung Control: Sinumerik 840D Storage location: Halberstadt Country of origin: Schweiz X-Travel: 1200 mm Y-Travel: 950 mm Z-Travel: 1200 mm Work spindle drive power (25% ED): 67 kW Work spindle torque (25% ED): 1508 Nm Tool Taper: HSK-A100 Workpiece interference circle diameter: 1250 mm Tool Piece Magazine With: 80 Pcs./pcs. Tool changer: Werkzeugkettenmagazin Max. Workpiece height: 1200 mm Feed Speeds X/Y/Z Axis: 60000 mm / min Feed Capacities X/Y/Z: 22/18/22 N Speed range - main spindle: 20 - 6000 RPM Numbers Of Pallets: 2 Max pallet load: 1500 kg Size Of Pallet: 800 x 630 mm pallet change time: 14 s Pallet clamping area (lxw): 800 x 630 mm Weight Of The Machine Ca.: 25 t Bljdpfxexqd Ano Aaqjp

Condition: ready for operation (used), Year of construction: 1998, Control Unit Brand SIEMENS Model Sinumerik 840C Main Drive Spindle speed range 6000 Tool taper SK50 Movement X-Axis Movement 1200 mm Y-Axis Movement 800 mm Z-Axis Movement 800 mm Tools Max tool length 750 mm This Burkhardt-Weber MC 80 was manufactured in 1998. It features a spindle speed of 6,000 rpm, a maximum feed rate of 25 m/min, and a tool capacity of 80 with SK50 adapters. The CNC Siemens Sinumerik 840C control system enhances its precision. Consider the opportunity to buy this Burkhardt-Weber MC 80 horizontal machining centre. Contact us for more information. Bedpfxoxqta Nj Aaqolp Application Types Milling

Condition: new, Year of construction: 2025, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 60 m/min, controller model: Simens Sinumerik 840 D SL mit Handterminal HT 2, workpiece length (max.): 3,500 mm, workpiece width (max.): 1,500 mm, workpiece height (max.): 700 mm, spindle speed (min.): 12,000 rpm, spindle speed (max.): 24,000 rpm, CNC machines from HG GRIMME SysTech - CNC 5-axis milling machine G-S-F/Universal Perfect for: Applications in model and mold making but also for milling other materials - universal powerhouse with a rapid traverse speed of 80 m/min Materials: Plastics, composite materials such as CFRP / GFRP, model making materials, aluminum Industries: Automotive, aviation, transportation & logistics, leisure industry, sanitary, boat building, automation _____ Reference number: 1204 Availability: April 2025 Model: 5-axis CNC milling machine G-S-F/Uni Spindle data: 13 kW / 10.3 Nm; 12000-24000 1/min; HSK F 63 Rapid traverse X/Y/Z: 80/80/60 Component dimensions: 3500 x 1500 x 700 Control: Siemens Sinumerik 840 D SL with manual terminal HT 2 Tool changer: 10 tools Tables: 1 table Bjdpfjvcax Tjx Aaqjlp Vacuum system: yes Tool breakage and length control: Renishaw-TS 27 R Other: pneumatic sliding door Year of construction: 2025 Condition: new

Condition: used, Year of construction: 2002, Operating hours: 74,350 h Technical data: Travel distances: X-axis (column right/left): 700 mm Y-axis (spindle up/down): 800 mm Z-axis (table): 700 mm Distance spindle nose to table: 50 - 850 mm Bsdpfxexqqwrs Aaqelp Distance spindle end to table center: 150 - 850 mm Table size: 500 x 500 mm Max. workpiece weight: 800 kg Spindle: Spindle speed range, steplessly variable: 50 - 5,000 rpm Taper: SK 50 Spindle diameter: 100 mm Feed rate: Rapid traverse (X, Y, Z axes): 30,000 mm/min Tool magazine capacity: 40 tools Tool diameter: Without tools in adjacent stations: ø 140 mm With tools in adjacent stations: ø 240 mm Tool length: 450 mm Tool weight: 28 kg Power consumption, max.: 45 kVA Weight, approx.: 21,000 kg

Condition: ready for operation (used), Year of construction: 2001, Main Drive Number of axis 4 Movement X-Axis Movement 560 mm Y-Axis Movement 610 mm Z-Axis Movement 560 mm This 4-axis Okuma MA-40HA horizontal machining centre was manufactured in 2001. It features a robust OSP 100U control system and a generous automatic tool changer with 60 magazine slots (ISO40). Ideal for complex machining tasks with its 560 mm travel in X, Y, and Z axes. Contact us for more information about this machine. Bjdpfx Ajxqtc Djaqolp Application Types Milling

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (min.): 12,000 rpm, spindle speed (max.): 36,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Bledpfx Aasxdwndeqsp Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: used, Year of construction: 2000, Operating hours: 53,205 h Technical data: Travel paths: X-axis (column right/left): 1,000 mm Y-axis (spindle up/down): 800 mm Z-axis (table): 810 mm Distance spindle nose - table: 50 - 850 mm Distance spindle end - table center: 200 - 1,010 mm Table size: 630 x 630 mm Max. workpiece weight: 1,200 kg Spindle: Spindle speed range, infinitely variable: 50 - 5,000 rpm Spindle diameter: 100 mm Bedpfexqqqxex Aaqslp Tool holder: HSK 100 Feed rate: Rapid traverse: 30,000 mm/min Tool magazine capacity: 60 tools Tool diameter: Without adjacent tools: ø 140 mm With adjacent tools: ø 240 mm Tool length: 400 mm Tool weight: 28 kg Power consumption, max.: 45 kVA Weight, approx.: 24,000 kg

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand HAAS Main Drive Tool taper SK 50 Number of axis 4 Movement X-Axis Movement 1626 mm Bodpfx Aaexp Stroqolp X-Axis Rapid Traverse 15.2 m/min each Y-Axis Movement 1270 mm Y-Axis Rapid Traverse 15.2 m/min each Z-Axis Movement 814 mm Z-Axis Rapid Traverse 15.2 m/min each Workpiece Workpiece weight 4536 kg Media Chip conveyor Yes Additional Equipment Coolant tank with low and high pressure pumps 2 chip conveyors with screw This 4-axis HAAS EC-1600 was manufactured in 2008. It features a large table (1626 mm x 814 mm) with an integrated 4th axis rotary table, a milling spindle SK 50, and a 30+1 tool changer. The machine can handle workpieces up to 4,536 kg and includes dual chip conveyors. If you are looking to get high-quality milling capabilities, consider the HAAS EC-1600 machine we have for sale. Contact us for more information. Application Types Milling

Condition: new, Year of construction: 2025, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 60 m/min, controller model: Simens Sinumerik 840 D SL mit Handterminal HT 2, workpiece length (max.): 3,500 mm, workpiece width (max.): 1,500 mm, workpiece height (max.): 700 mm, spindle speed (min.): 12,000 rpm, spindle speed (max.): 24,000 rpm, CNC machines from HG GRIMME SysTech - CNC 5-axis milling machine G-S-F/Universal Perfect for: Applications in model and mold making, but also for milling other materials – a universal powerhouse with a rapid traverse of 80 m/min Materials: Plastics, composite materials such as CFRP/GFRP, model making materials, aluminum Industry: Automotive, aviation, transport & logistics, leisure industry, plumbing, boat building, automation Blsdjwdt Ezspfx Aaqop Reference number: 1210 Availability from: July 2025 CNC machine type: 5-axis CNC milling machine G-S-F/UNI (35-15) Spindle specifications: 13 kW / 10.3 Nm; 12,000-24,000 rpm; HSK F 63 Rapid traverse X/Y/Z: 80/80/60 Component dimensions X/Y/Z: 3500 x 1500 x 700 Control: SIEMENS – Sinumerik One with HT 2 handheld terminal Tool changer: 10 tools Tables: 1 table Vacuum system: yes Tool breakage and length control: Renishaw-TS 27 R Other: upon request Year of manufacture: 2025 Condition: new

Condition: new, Year of construction: 2025, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 60 m/min, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 800 mm, spindle speed (min.): 36,000 rpm, spindle speed (max.): 12,000 rpm, CNC Machines from HG GRIMME SysTech - CNC 5-Axis Milling Machine G-S-F/Universal Blodpfx Aswdt Ipjaqop Perfect for: Applications in model and mold making, but also for milling other materials – a universal powerhouse with a rapid traverse of 80 m/min Materials: Plastics, composite materials such as CFRP/GFRP, model making materials, aluminum Industries: Automotive, aviation, transport & logistics, leisure industry, plumbing, boat building, automation Reference number: 1208 Availability: July 2025 CNC Machine Type: 5-Axis CNC Milling Machine G-S-F/B (25-13) Spindle specifications: 8 kW / 6.4 Nm; 12,000-36,000 rpm; HSK E 40 Rapid traverse X/Y/Z: 80/80/60 Component dimensions X/Y/Z: 2500 x 1300 x 600 Control: SIEMENS – Sinumerik 840D sl with HT 8 Tool changer: 13 tools Tables: 1 table Vacuum system: yes Tool breakage and length control: Renishaw-TS 27 R Other: upon request Year of manufacture: 2025 Condition: new