Condition: used, This listing is for 1 of 2 Watson Marlow 504u Mk2 Peristaltic Pumps These units are in full working condition and ready for immediate release. The Watson‑Marlow 504U is a peristaltic (tube) pump designed for dosing, dispensing, or fluid transfer in laboratory, process, and industrial settings. Because of its design, the fluid only contacts the tubing, which helps with chemical compatibility, sterility, and ease of cleaning/maintenance. It features a fairly durable, washdown‑resistant housing (IP55) in many versions, allowing it to tolerate exposure to splashing or low‑pressure water jets. A few variants (e.g., “Mk2” or “Du”) bring updates in control, enclosure, and durability Hjdpfsxv Affox Ad Denw Other features: The manual for the 504Du version describes that the pump’s speed control ratio is 220:1, giving a minimum speed of 1 rpm (for the 220 rpm drive) and 0.5 rpm (for 55 rpm version). The pump is intended to be installed on a horizontal surface with good ventilation and free airflow around it. The pump allows for remote control / automation through a 6‑pin port for auto/remote operation

Condition: used, Item: D-5730-Dickow Pump Wilhelm Dickow, Type NCL 50/165 Centrifugal pump / explosion-proof centrifugal pump with shaft seal 7,5 kW, 2890 r/min Hnodpfx Aeiiyrked Dew

Condition: like new (used), functionality: fully functional, Newly arrived! We can offer you this top incubator / heating cabinet type B 5028 of the world brand "Heraeus" from federal stocks. The B 5028 is characterized by its particularly precise temperature control and minimal energy requirements and, due to its almost indestructible quality / design, is virtually indispensable in any laboratory. Thanks to its extremely compact design, it fits ideally as a table-top unit even in the smallest corner and can be connected electrically almost anywhere - power consumption only 180 watts! The minimum temperature deviations comply with DIN 58945 Sheet 1, and the appliance also has a timer, fresh air supply and overload/temperature protection. The appliances offered here are all from stock and have never been used - all components are in mint condition and undamaged - see pictures. Hnedpfx Aoqv Avtjd Dow The delivery takes place in a special wooden box, including power cable and operating instructions. Technical data: Temperature range 10-70 degrees External dimensions (WxHxD): 510 x 540 x 450 mm Internal dimensions (WxHxD): 260 x 350 x 320 mm Usable capacity approx. 28 liters DIN 12880 part 1 and 2 tested Protection class 1 IP 20 Temperature monitor according to DIN 12880 class 3.1 Shelves: 2 Weight: approx. 30 kg Shipment will be made within three working days of receipt of payment by a forwarding agent - you can of course also collect the appliance from us during regular opening hours. The total weight of the system including accessories and pallet is approx. 60 kg. The sale is aimed exclusively at traders, you will of course receive an invoice with VAT shown. Private buyers have the option of purchasing the device "on behalf of a customer"; direct commercial sales to private individuals are expressly excluded! The goods are sold under exclusion of any warranty or liability for material defects. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: used, This listing is for a Watson Marlow 604S Peristaltic Pump The unit is in full working condition and is ready for immediate release. The Watson‑Marlow 604S is a laboratory/industrial peristaltic (tube) pump, designed for dosing, metering, and fluid transfer tasks where the fluid must remain isolated from moving parts. It’s part of the “600” series of Watson‑Marlow pumps and is intended for relatively high flow rates in a controlled environment (e.g. labs, pilot plant, certain chemical or processing setups). Because it’s a peristaltic pump, the fluid only contacts the inner wall of a flexible tube, which makes it suitable for shear‑sensitive, corrosive or potentially particulated fluids, without contaminating the pump internals Hnedpfxjxv Ad Us Ad Dsw Strengths Clean & Isolated Flow: Because only the inner surface of the tubing contacts the fluid, there is no risk of cross‑contamination or fluid leaking into mechanical parts. Good Flow Capacity: With a relatively high maximum flow (≈ 11 L/min), it can handle moderate bulk transfer in addition to dosing. Robust Housing: The IP55 rating makes it resistant to dust ingress and water spray, which is beneficial in industrial or lab environments with splashes. Variable speed control: The broad control range allows fine tuning of flow. Relative simplicity of maintenance: Replacing tubing is straightforward compared to more complicated pump mechanisms (valves, seals, diaphragms, etc.).

Condition: excellent (used), From stocks of the federal government we can offer you these top maintained breathing air compressors type MAC 100 S of the world brand Dräger from 1. hand! The MAC 100 S is able to supply high purity breathing air according to EN 737-3 for hospitals and other medical facilities, it can be continuously adjusted for this in a range of 0-6 bar. The unit is extremely quiet and can be operated continuously all day. All components are easily accessible through the two maintenance flaps, and all filters can be changed in just a few minutes. Technical data: Hnedpfeitcx Tex Ad Djw WxHxD: 630 x 884 x 690 mm Weight: 115 kg Mains connection: 230 V / 50 Hz Power consumption: 6.0 Ampere Sound pressure level: maximum 50 dB (A) The units have been stored continuously in special wooden boxes, and have only been put into operation during the annual inspections and maintenance - running time in each case only between 30 and 100 hours. The scope of delivery includes - apart from the device itself - the transport box and an instruction manual. All devices are visually and technically in excellent condition, and have no damage - minor scratches or discoloration may occur, but are due exclusively to the maintenance work, and do not limit the usability of the devices in any way. The total weight of the system including accessories and box is approx. 210 kg. The sale is aimed exclusively at professionals, you will of course receive an invoice with VAT. Private buyers have the possibility to purchase the device "on behalf of a customer", a direct commercial sale to private persons explicitly does not take place! The goods are sold under exclusion of any warranty or liability for material defects. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations of the seller, as well as for any injury to life, limb and health. If you have any questions regarding prices or technical details, please do not hesitate to contact us at the address given.

Condition: used, This listing is for a Thermo Scientific Multi Blok heater 2050 1CE The unit is in full working condition and is ready for immediate release. The Multi Blok Heater is a laboratory heating device used to heat samples in tubes, vials, PCR plates, etc., by conduction via a metal block, rather than using a water bath. Hjdpfx Adjxv Aduj Dsnw “2050” is the model number, while “1CE” (or “1CEQ”) denotes a single‑block, CE‑certified version suited for use with one interchangeable modular block. The device is compact and bench‑top, intended for fixed temperature incubations, sample pre‑heating, enzyme reactions, and other lab protocols where stable heat is required.

Year of construction: 2008, condition: excellent (used), Special opportunity! From the federal government's inventory, we can offer you this perfectly maintained "AutoVue Innova" blood analysis system from the global brand Ortho Clinical Diagnostics, with every conceivable extra! The AutoVue Innova is a fully automated blood analysis system used worldwide – primarily for establishing and operating blood banks. It can provide blood typing and a wide range of other data extremely efficiently and has become an indispensable part of any larger laboratory. The system was acquired by the federal government in 2008/2009 and has been continuously tested and maintained. All components are in perfect visual and technical condition and show no significant damage – see pictures. It was taken out of service in 2023 due to a new acquisition and was fully operational until recently. Scope of delivery: - AutoVue Innova blood analysis system - 2 BioVue System centrifuges - 2 BioVue System Heath Block-32 thermoblocks Hnodpfx Adjwh Tn Dj Dsw - 3 BioVue System digital multidispenser pipettes - 1 digital incubator thermometer - 9 Low Volume 96 Well Lock Nut Evo tips - 5 Sample Quadrant Blue, 5 Sample Quadrant Green, 4 Sample Quadrant Red - 3 10-place sample holders - 5 Rotor Reagents - 2 Philips spare lamps - 14 Mat Filters - 1 OrthoScan 3.50.C software, 1 TecnoSoft Resolvigen 3 software - 1 ELO touchscreen, 1 METO OS-204 thermal transfer label printer with spare rolls - 1 Zebra TLP 2844 thermal transfer label printer with spare rolls - 1 Epson Perfection 4900 photo scanner Photo, - 2 x Adaptus 3800g handheld barcode readers + 1 x Honeywell Eclipse MS5145 handheld barcode reader - Spare parts and accessories, manuals. Dimensions: 1600 x 900 x 755 mm Weight: approx. 230 kg (AutoVue Innova only) Weight: approx. 320 kg (total weight of all components) Shipping is available for an additional charge within three business days after receipt of payment, insured by a freight forwarder. You also have the option of picking up the device from us during regular business hours. The total weight of the system, including accessories and pallets, is approximately 350 kg, on three pallets. This sale is exclusively for commercial customers; you will, of course, receive a VAT invoice. Private buyers have the option of purchasing the device "on behalf of a customer"; direct commercial sales to private individuals are expressly excluded! The goods are sold without any warranty or liability for material defects. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of the seller's obligations, nor to any injury to life, limb, or health. Please feel free to contact us at the address provided for any inquiries regarding prices or technical details.

Condition: used, This listing is for one of 2 Mettler Toledo Seven Excellence Multi parameter Metres The unit is in full working condition and is ready for immediate use The METTLER TOLEDO SevenExcellence series includes a line of advanced benchtop meters designed for high-precision electrochemical measurements. These meters are ideal for applications in pharmaceuticals, food and beverage quality control, and environmental testing. Key Features Across the Series Measurement Capabilities: Models support pH, conductivity, resistivity, redox/ORP, TDS, salinity, ISFET, ion selective electrodes (ISE), and dissolved oxygen (DO). User Interface & Workflow Optimization: Large touchscreen display for intuitive, efficient navigation. Plain language menu structure eliminates confusion during setup. One-click operation launches one of 17 predefined or 60 customizable methods, boosting throughput. Choose from uFocus™ view, which displays only critical data, or standard view for detailed information including setup and measurements. Data Management: Export results to printers, Excel, or LIMS. Compatible with LabX software for 21 CFR Part 11 compliance and advanced data control. Time and date stamps from a radio-controlled clock ensure compliance with GLP standards. Security & Compliance: Hnedpfexv Adbsx Ad Djw User management settings and PIN protection prevent unauthorized method changes. Integrated Sensor Management (ISM®) pH electrodes are automatically recognized and retain their own calibration data—ensuring accuracy even when electrodes are swapped. Modular and Ergonomic Design: Electrode arm enables easy one-handed operation and precise vertical movement to reduce spills and save time. Modular construction allows for easy upgrades and expansion as your lab's needs change. Connectivity options include USB, Ethernet, and RS-232 ports for integration with PCs and peripheral devices.

Condition: excellent (used), Suitable for all Philips HD5, HD7 / XE, HD9 / XE, HD11 / XE ultrasonic devices We can offer you these convex ultrasound probes type "Philips" C5-2 Curved Array from federal stocks. The probes originate from devices from federal stocks from the years 2011-2016, which were kept in stock for storage purposes and were never used commercially. They were only connected for annual testing, but were otherwise not in use. The condition is visually and technically flawless, the probes function without restriction and can be used immediately. The price is always for one probe as described. Hodpfx Aouh Tu Ted Donw Shipment will be made within three working days of receipt of payment by DPD. For reasons of liability, we do not sell directly to private customers - however, private buyers have the option of purchasing the devices "on behalf of the customer". The goods are sold under exclusion of any warranty or liability for material defects. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health. If you have any queries regarding prices or technical details, please contact us at the address given.

Condition: used, This listing is for a Stuart Scientific SB301 Magnetic Stirrer The unit is in full working condition and is ready for immediate release. Hnsdpfxjxv Ac Do Ad Djw Overview & Intended Use The SB301 is a robust, heavy‑duty magnetic stirring device designed for laboratory applications where relatively large volumes of liquid (up to around 30 L of water-equivalent) need to be stirred. It is used in chemistry, biology, environmental labs, or anywhere you need continuous stirring without introducing mechanical agitation (i.e. no overhead stirrer, no impeller). It emphasizes stable speed control, durability, and strong magnetic coupling (i.e. strong magnetic fields to drive the stir bar reliably even under load

Condition: excellent (used), Suitable for all Philips HD5, HD7 / XE, HD9 / XE, HD11 / XE ultrasonic devices We can offer you these convex ultrasonic probes type "Philips" L12-3 Linear Array from federal stocks. The probes originate from devices from federal stocks from the years 2011-2016, which were in stock for storage purposes and were never used commercially. They were only connected for annual testing, but were otherwise not in use. The condition is visually and technically flawless, the probes function without restriction and can be used immediately. Hnjdpfxeuh Tt Ae Ad Dow The price is always for one probe as described. Shipment will be made within three working days of receipt of payment by DPD. For reasons of liability, we do not sell directly to private customers - however, private buyers have the option of purchasing the devices "on behalf of the customer". The goods are sold under exclusion of any warranty or liability for material defects. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health. If you have any queries regarding prices or technical details, please contact us at the address given.

Condition: used, This listing is for a Bibby Scientific HT2 Halogen Hotplate Stirrer The unit is in full working condition and is ready for immediate release Hnedpfxexv Acwe Ad Djw Bibby Scientific HT2 Halogen Hot Plate Stirrer Bibby HT2 Bibby Sterlin HT2 HT2 120 Volt a high heat glass top halogen hot plate stirrer Maximum temperature 450C Stirrer speed range 0 to 1100 rpm Heater Twin infra red halogen lamps Heater area (dia) 140 mm Dimensions lxwxh 300 x 300 x 100 mm

Year of construction: 2012, condition: like new (used), functionality: fully functional, Special opportunity! From stocks in the state of Rhineland-Palatinate, we can offer you these well-maintained CO2 incubators from the global brand "Heraeus" or "Thermo Electron" type HERAcell 150 in copper design. The HERAcell 150 is one of the most used and reliable devices in the sector, and is now an indispensable part of almost every laboratory worldwide. It has a completely copper interior with a water tank integrated directly into the work area, which makes working even easier, and three copper shelves. The devices were purchased by a biology institute at the university, but were hardly used, and mostly only switched on for testing purposes - all components including the shelves are in a technically and visually very well-maintained condition - see pictures. There is no damage or malfunctions, the devices can be put into operation immediately - however, for the sake of good order, we would like to point out that all regular tests in accordance with STK / MTK must be carried out again before commercial use! The greenish discoloration shown is due to the use of water in combination with copper during the functional tests and does not limit usability in any way. In addition to the device itself, three shelves, power cable and voltage converter from 120 to 230 volts are included, as the devices were originally ordered with a 120 volt power supply. The price is for one device with accessories as described. Technical data: Capacity (Anglo-American)5.3 cu. ft. Data Output RS232 Capacity (metric)150 L Chamber Material Copper CO2 Concentration Range0 to 20% CO2 Sensor TechnologyTC Sensor Lighting LED MaterialCopper O2 Concentration Range Optional 1 to 21% or 5 to 90% Hodpjvph Enofx Ad Donw Oxygen Control Optional 1 to 21% or 5 to 90% Relative Humidity

Condition: used, This listing is for a IBICO Ibimaster 300 Multifunctional Comb Binding Machine The unit is in full working condition and is ready for immediate release. Specifications & Features Hnedpfjxv Acksx Ad Dow It’s a multi‑functional binding machine that can both punch and bind documents. Canterbury Used Office Furniture Punching capacity: 21‑hole: ~ 20 sheets of 80 gsm paper at once 4‑hole (for e.g. 4‑hole filing): up to ~ 30 sheets Binding capacity: Up to ~ 500 sheets (80 gsm) using a 51 mm plastic comb Maximum punching width: ~ 315 mm (fits A4 / A5 width) Dimensions & weight (from used listing): ~ 425 × 125 × 425 mm, weight ~ 10.8 kg It supports simultaneous punching and binding thanks to its combined design

Condition: excellent (used), Opportunity! Previously owned by the German government, we are pleased to offer this top-quality liquid handling system, type "Genesis RSP 100/8," from the global brand TECAN, as a complete system with all accessories, from a single source. The fully automated Genesis RSP 100/8 pipetting robot system is one of the most reliable systems available today and is an indispensable part of any laboratory. All components are in excellent condition; the system has never been used industrially and has seen very little use. All devices are in excellent optical and technical condition and show no significant damage – see pictures. The extensive range of accessories provides you with a complete system that you can start using immediately. Scope of delivery: - TECAN RSP 100/8 Liquid Handling System - Eppendorf Gradient PCR Mastercycler - Olympus DP10 Digital Microframe Camera for Droplet Size Monitoring - GeSim 1.2 Nanoplotter with Housing - Diluter 4 - NPC 8 Software - Gemini v4.2 Software - Cables, manual, power supplies, and small parts - Various pipette tips in various sizes (2 boxes containing approximately 10,000 pieces) Dimensions: (D) x (H) x (W): 78 x 94 x 106 cm Weight: approximately 145 kg Shipment will be made within three business days after receipt of payment by insured freight forwarder. You can also pick up the device from us during regular business hours. The total weight of the system, including accessories and two pallets, is approximately 250 kg! This sale is exclusively for businesses; you will, of course, receive a VAT invoice. Hnsdswltr Rjpfx Ad Dew Private buyers have the option of purchasing the device "on behalf of a customer"; direct commercial sales to private individuals are expressly excluded! The goods are sold excluding any warranty or liability for material defects. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of the seller's obligations, nor to any injury to life, limb, or health. Please feel free to contact us at the address provided for any inquiries regarding prices or technical details.

Condition: used, This listing is for a Pacific Scientific 3313LL Met One Particle Counter The unit is in full working condition and is ready for immediate release. Operational & Practical Notes / Behavior The 3313LL counts particles by passing a laser (or light source) through the sampled air stream; when particles pass through the beam, they scatter light, which is detected by a photodetector. By having multiple size channels, the instrument can bin the counts into different particle-size ranges (for example: 0.3 µm, 0.5 µm, 1.0 µm, 3.0 µm, 5.0 µm, 10.0 µm). It likely offers programmable sampling intervals, hold times, alarm thresholds, etc. (common features in Met One/Met One‑type instruments). Data export via serial is standard, allowing integration with control or data acquisition systems. Hnsdpfsxv Ab Hsx Ad Dew Because it’s a relatively high‑flow device (1 CFM), it can sample a substantial volume of air (improving statistical confidence in counts). The stainless steel construction helps with durability, cleanliness, and possibly resistance to corrosion or harsh environments. As a used / legacy device, calibration, maintenance, and replacement parts (filters, laser, pump, optics) may be important considerations.

Year of construction: 2007, condition: like new (used), functionality: fully functional, Special Opportunity! Only ONE unit left! Hsdpfxewcznbo Ad Djnw We are able to offer you this top-quality Thermo / Heraeus B 6200 incubator, in mint condition, from the inventory of the State of Thuringia. The B 6200 is one of the most reliable units on the market and has become indispensable in laboratories worldwide. Known for its high precision, it is also regarded among professionals as especially robust and durable. This device was purchased new by the State of Thuringia in 2007 and has since only been operated annually for calibration purposes. Its condition is immaculate both visually and technically – see photos. A particular highlight is the enhanced specification, far surpassing the standard model: this B 6200 features additional safety switches, a timer, and microprocessor-controlled temperature regulation. The price refers to one incubator with the described equipment and an internal shelf as shown. Technical Data: Thermo / Heraeus B 6200 incubator Manufacturer: Thermo / Heraeus, Made in Germany Internal volume: 196 liters. Temperature range up to 70°C. Fresh air and exhaust ports. External dimensions (W x H x D): 895 x 816 x 715 mm Internal dimensions (W x H x D): 554 x 644 x 550 mm Weight: approx. 90 kg 230 V, 50 Hz, 2.6 A, 0.6 kW Features: Digital temperature controller with microprocessor monitoring, over- and under-temperature protection. Timer. Stainless steel inserts. Applications: Microbiological incubation in pharmaceutical, medical, and microbiological laboratories; hygiene testing in pharmaceutical, food, and cosmetics industries; long-term storage tests; and more. This offer is directed exclusively at commercial customers. An invoice with VAT shown will be provided. Private buyers may purchase the unit "on behalf of a customer." Direct commercial sale to private individuals is expressly ruled out. The goods are sold under exclusion of any warranty or liability for material defects. This exclusion does not apply to damage claims due to gross negligence or intentional misconduct by the seller, or any injury to life, limb, or health. Shipping will be arranged within three working days of payment receipt via freight carrier. Alternatively, you may collect the device from our premises by appointment during business hours. Total shipping weight including accessories and pallet is approx. 110 kg. If you have any questions, please contact us directly using the details provided.

Condition: used, This listing is for a Sartorius Practum The unit is in full working condition and is ready for immediate release. The Practum series from Sartorius is positioned as a standard‑laboratory precision balance line: “you can’t go wrong … without compromises in precision and reliability.” The 513 model variant supports a weighing capacity of ~510 g with readability of 0.001 g (1 mg). For example, for the 513 model: capacity 510 g, readability 0.001 g, repeatability ~±0.001 g, linearity ~±0.002 g. Robust build: German‑engineered weigh cell protected against overload, aluminium die‐cast base + ABS housing in many models. Practical features for lab use: A draft‑shield/wind‑protection for precision weighing, especially for those 1 mg readability contexts. The draft shield is described as robust yet easy to clean/disassemble. Supervisor lock: a menu lock to prevent unintentional changes by operators. Hnodpsxv Abtefx Ad Djw USB interface (“Mini‑USB”) for data export and “Plug & Work” connectivity to PCs/printers with minimal extra software. Level‑indicator (bubble) and extra‑large adjustable feet for easier manual leveling. Cleanability/maintenance: The brochure states that the draft shield side windows, sliding cover and stainless steel parts on certain models (including 213/313/513) are easily removable for cleaning. Multi‑application: The balance supports not just standard weighing, but also density determination, percent weighing, check‑weighing, counting, etc

Year of construction: 2013, condition: excellent (used), Opportunity! We can offer you this very well-maintained "Vitek 2 XL" system from the global brand BioMérieux, firsthand from the federal government's inventory. As a fully automated system for the rapid detection of pathogens and resistance, the Vitek 2 system has become an indispensable part of virtually every medical laboratory in the world! The system was acquired by the federal government in November 2013 and continuously inspected and maintained in accordance with the maintenance contract. The last inspection and maintenance was carried out until August 2023. At the end of 2022, the device was taken out of service in working order due to a new purchase. All components are in top optical and technical condition, with no significant damage. Minor scratches and discoloration on the housing are due to normal operation and do not limit its use in any way. Description: The VITEK 2 system provides everything healthcare laboratories need for rapid and accurate microbial identification and antibiotic susceptibility testing. The system is used for the microbiological identification of pathogens of animal origin. It enables rapid and accurate antibiotic susceptibility testing and resistance detection. The automated system performs same-day susceptibility testing (with results in as little as 5 hours, supported by clinical trial data). This significantly improves veterinary laboratory workflow and optimizes clinical veterinary microbiology. The VITEK 2 system offers a comprehensive range of the most important susceptibility tests for veterinary diagnostics and is characterized by high performance and the ability to detect even low-level resistance and emerging resistance mechanisms (AmpC, ESBL, MBL, etc.). The software is also updated annually to incorporate any taxonomy developments or policy changes. The VITEK 2 disposable cards are sealed to prevent contamination during the bacterial suspension filling process. Scope of delivery: - Vitek 2 XL including power supply unit - PC with pre-installed software - UPS, monitor, keyboard Dimensions (W x D x H): 1400 x 710 x 670 mm. Weight: 145 kg Shipping will be made within three business days after receipt of payment via insured freight forwarding. You can also pick up the device from us during regular business hours. The total weight of the system, including accessories and pallet, is approximately 200 kg. The pallet is oversized! Sales are exclusively for businesses; you will, of course, receive an invoice with VAT shown. Hjdpfx Aowi Smujd Denw Private buyers have the option of purchasing the device "on behalf of a customer"; direct commercial sales to private individuals are expressly excluded! The goods are sold without any warranty or liability for material defects. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of the seller's obligations, nor to any injury to life, limb, or health. Please feel free to contact us at the address provided for any inquiries regarding prices or technical details.

Condition: used, This listing is for a Sartorius Combics 3 Balance The unit is in full working condition and is ready for immediate release The Combics 3 is described as a weighing terminal / indicator rather than the weighing pan or scale itself. It is designed to connect to one or multiple load‑cells / scales and manage/control them. Housing: It uses a stainless‑steel enclosure rated IP69K, meaning it is highly resistant to dust and powerful water jets — suitable for very demanding industrial or hygienic environments (food, pharma, chemical production). Display & Interface: Has a back‑lit graphical LCD display for clarity in industrial conditions. Hnodpfxoxv Abgs Ad Dsw Connectivity/Interfaces: Comes with standard communication ports (for example RS‑232) and various optional ones such as RS‑485, Profibus-DP, Ethernet TCP/IP, Modbus TCP, and analog/digital I/O for integration into automated systems. Multi‑scale support: Capable of managing up to three scales simultaneously. This allows e.g. combining inputs or workflows from multiple platforms. Applications: The terminal supports a number of weighing‑related functions: piece counting, recipe/formulation support (multi‑component weighing), target weight monitoring, classification, dynamic weighing (items in motion), percentage weighing, etc. Traceability & certification: Optional alibi memory (for trace logging of weighing data) is available, supporting compliance requirements (GMP, ISO, ATEX in some cases) for industrial/regulated environments.

Condition: used, This listing is for a SAS Super80 Air Sampler The unit is in full working condition and is ready for immediate release. Hedpfx Asxv Abaod Djnw The SAS Super series (by SAS / Bioscience International, also referenced under other distributors) are impaction‑type microbial air samplers. They draw a known volume of air through a sampling head so that airborne microorganisms are impacted onto an agar contact plate (or Petri dish) for subsequent incubation and colony counting. These instruments are commonly used in cleanrooms, pharmaceutical manufacturing, hospitals, and other controlled environments to assess airborne microbial contamination. Good combination of high airflow + relatively compact unit; allows efficient sampling of large volumes in minimal time. Wide usage and long track record (models from this family have been used since the late 1970s/80s) which implies reliability and a mature support ecosystem. Flexible head options (aluminium, stainless steel, resin), choice of plate types (contact plates or standard Petri dishes) in some variants. Strong traceability / data capture features, which are important for regulated environment

Condition: used, This listing is for a Schott Halogen HT2 Stirrer Hotplate The unit is in full working condition and is ready for immediate release. Key Features & Specifications While exact values for the “HT2” designation are not widely published, the listed SLR Halogen model gives a very good indication of typical performance: Heating surface: glass/ceramic top plate (≈16 cm diameter in one listing). Hodpexv Aa Njfx Ad Donw Maximum plate surface temperature: up to ~500 °C. Stirring range: approximately 10 – 1,100 rpm (in one listing). Compact dimensions: one listing shows ~24 × 37 × 9 cm (W×D×H). k Suitable for use with a retort rod.

Condition: used, This listing is for a Sartorius F1 10KG Cylindrical Calibration Weight The unit is in full working condition and is ready for immediate release. This is a high‑precision reference/test weight manufactured by Sartorius, made of stainless steel, with a nominal mass of 10 kg. It’s used primarily for calibrating, verifying and testing weighing instruments such as balances and scales. For example, the “Cylindrical Calibration Weight” line covers nominal masses from 1 g up to 10 000 g (10 kg) and this item falls at the top end of that range for the 10 kg value. Because it’s manufactured to a high class (F1 / OIML F1) and often comes with traceable certification, it serves as a “standard” weight for checking or adjusting high‑capacity lab or industrial balance Hedpfx Adexv Aavs Donw

Year of construction: 2002, condition: used, This listing is for a WFI System with 2 Mueller Clean Steam Generators. The system was installed in 2002, is in working condition, and is ready for immediate use. ----- Hedpfxoxv Aaie Ad Dsnw System Overview A complete Water For Injection (WFI) production, clean-steam generation, and storage system for pharmaceutical or biotech facilities. Produces ultra-high purity water and clean steam using dual Mueller steam generators, pressure columns, UV filtration, and automated control via a Pharma Tec panel. ----- Main Components Mueller Clean Steam Generators ×2 – dual units producing clean / pure steam for WFI and sterilization duties. Four Pressure Columns – separation, purification, and holding of steam / condensate under controlled pressure. Fristam Pumps – sanitary main supply pumps providing feedwater or circulation through the system. Hanovia UV Filters – ultraviolet sterilizing filters to remove microbiological contamination from feedwater or WFI stream. Pharma Tec Control Panel – automation and control system with PLC, level, temperature, pressure, and conductivity monitoring; full alarm & data-logging. ----- Key Features Dual redundancy via two clean steam generators allows maintenance or alternating load without shutdown. Four pressure columns improve separation, holding and stability of steam / condensate under varying pressure loads. UV filtration ensures microbiological safety in line with regulatory requirements. Sanitary pumps (Fristam) for clean design, ease of clean-in-place, and high hygiene. Automated control panel (Pharma Tec) providing precise monitoring, control, and regulatory compliance. ----- Specifications Manufacturer: Mueller, Fristam, Hanovia / Pharma Tec Year Installed: 2002 System Type: Clean Steam + WFI generation & storage Steam Generators: 2 × Mueller Clean Steam Generators Prize Pumps: Fristam sanitary feed / supply pumps Filtration: Hanovia UV sterilisation units on feed / WFI lines Control: Pharma Tec PLC / automation panel with full instrumentation (pressure, temperature, level, conductivity) Operating Conditions: Designed for pharmaceutical WFI-grade water and clean steam (sterile / pyrogen-free)

Year of construction: 1993, condition: used, This listing is for a Abbott 3531 Centrifuge Hnjdpfx Asxvz U Eed Dow Listing: Abbott 3531 Centrifuge Quantity: 1.0