Condition: used, Dionex / ThermoFisher FLM: Temperature range: 5–70 °C (max. 15 °C below ambient temperature) Temperature accuracy: ±0.5 °C Codpfx Aaextb Efsqohd Temperature stability: ±0.1 °C Temperature precision: ±0.1 °C Column capacity: Up to 3 columns, max. 30 cm length Heating time: From 20 to 50 °C in less than 25 min (at 23 °C ambient temperature, ±0.5 °C) Cooling time: From 50 to 20 °C in less than 35 min (at 23 °C ambient temperature, ±0.5 °C) Control: All functions software-controlled via USB 1.1 I/O interfaces: 2 digital inputs, 2 programmable relay outputs Column recognition: Electronic identification system for 3 columns Switching valves: 1 or 2 thermostated microvalves with low dispersion (10 ports or 6 ports) Flow splitter: Nano, capillary, or thermostated micro-flow splitter with flow splitter identification system Flow control: Electronically controlled and actively balanced flow splitter, independent of solvent composition and backpressure Column flow range: 50 nL/min to 2.5 mL/min using a predefined splitter and active flow control Flow range selection: 50 nL/min to 1,000 nL/min (using a Nano-LC splitter) 0.5 μL/min to 10 μL/min (using a capillary LC splitter) 10 μL/min to 160 μL/min (using a micro-LC splitter) Gradient delay time: Typically 600 nm. Noise: At a wavelength:

Condition: excellent (used), Couloscope v18, Couloscope CMS2 STEP Cjdpfx Aasvzb Umjqohd

Condition: like new (used), Year of construction: 1989, functionality: fully functional, T. Giusti & Son Ltd s/s double jacketed mixing tank with steam boiler, serial number: J10717, capacity: 500 liter, dimensions tank: Ø 1100 mm x 2600 mm, dimensions steam boiler: 800 mm x 620 mm x 1800 mm, with switch cabinet, Chjdpfx Ajxrnuwoaqod

Condition: used, This listing is for a Sartorius MSA4202S 8.2g-2500g Precision Balance The unit is in full working condition and is ready for immediate release. Chjdpfx Aaexuu Hljqsd Modular design (part of the Cubis® series) – the system is built of a weighing module + display/control unit + interface modules, designed for flexible configuration. High-resolution colour TFT display + touchscreen interface, offering an intuitive user interface. Multiple interfaces standard: USB, Ethernet, RS-232, SD card reader for data transfer and traceability. Functions typically include: weighing, density determination, averaging, formulation, percentage-weighing, check-weighing, totalising. Assisted (and optionally motorised) levelling; the system detects inclination and assists the user in levelling the instrument. Automatic internal calibration (isoCAL) for improved stability and lower drift. GLP/GMP/traceability ready: audit trail functions, user profiles, etc

Condition: good (used), Year of construction: 2015, Laboratory furnace for bending tests, 120 kW kiln, 900 °C chamber furnace 2 bending chambers Adjustable ceiling height Temperature range: max. approx. 900 °C Auxiliary heating Control cabinet PC, HP, Intel Core 2 Duo Voltage: 400 V Power: 120 kW Year of manufacture: 2015 Pre-chamber Width: 900 mm Height: 300 mm Depth: 580 mm Bending chamber Width: 520 mm Height: 115 mm Depth: 550 mm Further items – new and used – can be found in our shop! Chedpfxexurpwo Aaqsd International shipping costs on request!

Condition: good (used), Year of construction: 2020, Fully automatic assembly line for MA disposable face masks Manufacturer: PIA Automation Model: PIA-M200101 Year of manufacture: 2020 Mask type - 1-ply non-woven masks - 3-ply non-woven masks Mask size: 17.5 × 9.5 cm (adult) Output: 80 pieces/min Ultrasonic frequency: 20 KHz Machine dimensions: 6000 x 5000 x 2800 mm Voltage: 400V – 50 Hz Compressed air: 5–7 bar Power supply: 12 kW Cycle time: 80 pieces/min High output: 100,000 pieces per day Easy and safe operation Automatic alarm system Integrated intelligent control system One-man operation The manufacturing process includes the feeding of filter material, pleating and pressing, feeding of nose bridge clips, mask forming, mask cutting, ultrasonic welding of earloops, stacking for packaging, and other auxiliary processes. Especially suitable for the production of three-layer disposable masks. Csdpfx Aeu T Rydsaqehd Additionally, a UV unit has been installed to increase the hygiene standard, as well as a stacking device for preparation for subsequent packaging.

Condition: used, Illumina DNA Sequencer MiSeq SY-410-1003 Description: Cedpfx Aaoxqnvrsqjhd RFID tracking for consumables MiSeq Control Software 2.6 LTSC Operating environment Temperature: 22°C ± 3°C Humidity: Non-condensing 20%–80% Altitude: Less than 2,000 m (6,500 ft) Air quality: Pollution degree II Ventilation: Maximum 1,364 BTU/h For indoor use only Light Emitting Diode (LED): 520 nm, 660 nm Dimensions W × D × H: 68.6 cm × 56.5 cm × 52.3 cm (27.0 in × 22.2 in × 20.6 in) Weight: 57.2 kg (126 lb) Power supply 90–264 VAC at 50/60 Hz, 10 A, 400 W Radio Frequency Identification (RFID) Frequency: 13.56 MHz Power: 100 mW Product safety and compliance NRTL certified IEC 61010-1 CE marked FCC/IC approved Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Weight: approx. 35 kg (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Year of construction: 2016, condition: excellent (used), I am selling a Leica RM2255 in very good condition, after inspection. Codpfovygd Rsx Aaqshd

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10404807, Professional recirculating chiller, purchased (used) via Amikon GmbH in January 2024. Always serviced and inspected by Julabo themselves. In 2025, among other things, the pump and power board were replaced. Invoices and reports are available and will be supplied. Specifications: - Type: FLW4006 (water-cooled) - Power supply: 400V, 50Hz, 3P+N+PE, 16A - Refrigerant: R452A, 700g - Capacity: approx. 4 kW - Temperature range: –15 °C to +40 °C - Temperature stability: ±0.5 °C - Serial number: 10404807 Condition: - In very good technical condition - Immediately ready for use Chsdjw U Exgepfx Aaqsd - Including documentation and maintenance invoices

Condition: used, This listing is for a Sartorius MSA124S Balance The unit is in full working condition and is ready for immediate release. The MSA124S is part of the Sartorius “Cubis” series of analytical balances, which are modular, high-performance instruments designed for milligram-level weighing. Very fine resolution / readability: it supports a readability of 0.1 mg (0.0001 g) in many configurations. Weighing capacity: around 120 g (for the “124” model) in the typical configuration. Chsdpfx Aoxuqmnoaqjd Excellent repeatability and linearity: e.g., repeatability ≤ ±0.1 mg, linearity ≤ ±0.2 mg. High-end interface and connectivity: E.g., Ethernet, USB, RS-232, optional Bluetooth; also SD-card reader for data transfer. Advanced ergonomic features: tiltable and removable display/control unit, motorised draft shield (in certain variants) to minimise environmental influences. Compliant with GLP/GMP/laboratory traceability requirements: audit trails, user profiles, leveling assistance etc in higher-end configurations Because of its high precision and fine resolution, the MSA124S is best suited for: Analytical laboratories performing gravimetric measurements, chemical/ pharmaceutical labs, material science labs. Applications where small sample masses must be weighed accurately (e.g., formulations, dosing, microparticles). Environments requiring audit-trail/logging, connectivity, and data export (e.g., regulated labs). Use cases where drift/offset must be minimised and environmental effects (drafts, vibrations, static) must be managed.

Condition: used, functionality: unexamined, machine/vehicle number: Miniload II, Used Leica Miniload II microscope/microhardness tester Manufacturer: Leica Microsystems Codexr Ev Sepfx Aaqohd Model: Miniload II Without its own lighting power supply Equipped with 50x and 10x lenses

Year of construction: 2020, condition: good (used), FFP2 Mask Machine Production Line Manufacturer: Ruhlamat Model: MPL FFP2/016 Year of manufacture: 2020 Mask Production Line for N95/FFP2 Masks Dimensions (LxWxH, installed): 8921 x 1494 x 1985 mm Clearance around the machine: 1500 mm on all sides 50 Hz / 2.6 kVa Pressure: 6 bar Cjdperm R Hdjfx Aaqshd Weight approx.: 2500 kg FFP2 masks consist of 3 to 6 layers of nonwoven fabric. This machine can produce masks with up to 6 layers. The machine is comprised of five stations: Station 1: Unwinding unit Station 2: Nose clip punching and welding, embossing roller Station 3.1: Ear loop printing and welding Station 3.2: Fold alignment Station 4: Contour welding and mask cutting

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, overall weight: 140 kg, LPG Systems LPG Cellu M 6 Endermolab 1I or optionally 2I Beauty device Body and facial unit (new) Endermolift (Ergolift) Latest global patent for facial treatments Tested by a certified trainer in beauty and therapy Completely refurbished and overhauled Fresh maintenance recently carried out New hose Refurbished KM80 roller head from 2013 New KM70 roller head or therapy head TR50 New KM50 roller head New controller from previous owner Device has been freshly overhauled New valves, new seals, new hose New capacitors, new filter, etc. Original price: 39,980 EUR net Suitable for Endermologie body and Endermologie face treatments Optional upgrade to Ergo Lift patent 2014 for an additional 2,000 EUR Lipo massage and Endermolift technology available Like new and immediately available in Germany Optional delivery and commissioning according to LPG manual guidelines Optional starter package (Bodywear, filters, clamps, flyers) A premium device in the upper class of the medical beauty segment! Not junk like ultrasound or radiofrequency from China – Ergodrive, Ergolift 12-month warranty from date of purchase valid only with a 2-day training course and completion of the final exam Start your Endermologie season now. 100% natural mechanostimulation provides a painless yet intensive treatment. Addictive results—clients come to strengthen and firm connective tissue, reduce cellulite, and men to tighten abdominal areas. My clients typically lose up to 2 dress sizes, and the treatment has been scientifically proven to boost metabolism. Drooping eyelids and double chins can be positively influenced with the Endermolift. This patented system delivers the precision of Swiss watchmaking. For the past 14 years, I have treated and traded with older LPG devices, but the results from the latest generation convinced me to support the new Integral, Endermolab sibling models, and the Alliance. We continue to support you with application questions after purchase. Facts about LPG: 39 years of experience Global market leader in the medical beauty segment European company 175 documented clinical and scientific studies 80,000 devices produced Present in 100 countries 12 million treatments performed 200,000 treatments per day Leasing available from our partner bank E.g., 399 EUR/month Images are for reference; always new devices available You matter to us after your purchase! References available nationwide Cedpfx Aocgy Hdsaqohd Clients: Doctors, therapists, cosmeticians, etc.

Condition: excellent (used), I'm selling a Heraeus T 5042 EK search engine Csdpfxju Udp Ij Aaqjhd

Condition: used, This listing is for the Cole Palmer MasterFlex LS Pump Head 07528-10 with easy load ll pump head The unit is in full working condition and is ready for immediate release Cole-Parmer Masterflex L/S Easy-Load II Pump Head The Cole-Parmer Masterflex L/S Easy-Load II Pump Head is a high-performance peristaltic pump head designed for laboratory and industrial applications that require precise fluid handling. This updated model builds upon the original Easy-Load design, offering enhanced features for improved efficiency and ease of use. Key Features New Design and Automatic Tubing Retention: The updated design allows for easy tubing changes without removing the head from the drive. Automatic tubing retention secures the tubing without the need for manual adjustments, simplifying setup and reducing the risk of errors. Three-Roller Design: This design provides smooth and consistent flow, reducing pulsation and improving fluid transfer performance. Adjustable Occlusion: Fine-tune the occlusion to balance tubing life and pressure performance. By adjusting the "squeeze" on the tubing, users can optimize pressure, suction capabilities, and extend tubing life. Stainless Steel (SS) or Cold-Rolled Steel (CRS) Rotor/Roller: Choose between stainless steel or cold-rolled steel for increased durability and enhanced chemical resistance, catering to various operational needs. Stackable Design: The pump head is stackable for multichannel applications, and the rollers are offset by 45° to minimize pulsation when multiple pump heads are combined. Compact Design: The compact design ensures efficient use of space in laboratory or industrial setups. Multiple Tubing Sizes Compatibility: The pump head accepts various tubing sizes, including L/S 13, L/S 14, L/S 16, L/S 25, L/S 17, and L/S 18. This provides maximum flexibility for different fluid handling applications. Automatic Tubing Retention for Easy Setup: The automatic tubing retention system eliminates the need for manual adjustments, ensuring an easy setup process, improved tubing life, and better overall performance. Csdpfjxuqh Eex Aaqehd Flow Rate Range The pump supports flow rates from 0.06 to 2300 mL/min, depending on tubing size and drive settings, providing flexibility for a wide range of applications.

Condition: used, functionality: limited functionality, machine/vehicle number: 020-520.708 DMLM, Used Leica 020-520-708 DM LM Microscope with illumination Manufacturer: Leica Microsystems Model: 020-520-708 DM LM Voltage: 90V – 250V (50-60Hz) Equipped with 4 different objective lenses. Cedpfexr Emqox Aaqehd

Condition: used, This listing is for a Grant Bio McFarland DEN-! Densitometer The unit is in full working condition and is ready for immediate release. The DEN-1 is a compact benchtop turbidity/densitometer instrument manufactured by Grant Bio (part of Grant Instruments). It is designed primarily for life-science and microbiology applications — for example, measuring the turbidity of cell suspensions (bacterial, yeast) or other particulate suspensions. Typical uses include: Csdoxup Nhspfx Aaqshd Determining cell concentration in fermentation or culture processes Assessing microbial susceptibility (via turbidity changes) Identifying microorganisms in test systems Measuring optical density / turbidity at a fixed wavelength for dyes or suspensions

Condition: used, operating hours: 1,250 h, functionality: unexamined, machine/vehicle number: FlowFAST V18P, Used Faster-Air FlowFAST V 18 P vertical laminar flow cabinet on base Manufacturer: Faster-Air Model: FlowFAST V 18 P Voltage: 230 V – 50 Hz Work surface: 180 cm x 61 cm x ~75 cm (width x depth x height) With electrically height-adjustable base Chodpfx Aexrtvmjaqod

Condition: used, This listing is for a Thermo Fisher Scientific Sorvall RC6+ Centrifuge The unit is in full working condition and is ready for immediate release. The Sorvall RC 6 Plus is a high-speed, refrigerated floor-standing centrifuge designed for large-volume separations in research, bioprocessing or production labs. According to the manufacturer, it: Is capable of speeds up to 22,000 rpm (which corresponds to about 55,200 ×g) without needing a vacuum system. Handles up to 4 × 1,000 mL bottles in a single run (i.e., ~4 L total) in its standard configuration. Uses a brushless high-frequency motor drive, and has full refrigeration for temperature control. Offers a broad rotor compatibility platform (including composite, aluminium, continuous flow etc) for different In short: this is a heavy-duty centrifuge for larger volumes and higher speeds, suited to labs that need more capacity and performance than benchtop or mid-range units. Key Features & Highlights Here are some of the standout features: Speed & G-force: Up to 22,000 rpm, approx. 55,200 ×g. Capacity: 4 bottles of 1,000 mL (4 L total) in typical configuration. Temperature control: Ability to set in range from -20 °C to +40 °C (in 1 °C increments), and maintain temperature accuracy of ±2 °C. Codjxukkyepfx Aaqshd Motor/drive: Brushless high-frequency motor = faster spin up/downs, lower maintenance than older belt drives. Programmability & control: Up to 30 stored programs, with features like real-time control (delayed start/stop), ω² dt (integrator) for reproducibility, pre-cool function, and both rpm and RCF display. Safety & interlocks: Automatic lid-lock when running, door cannot be opened while rotor is spinning, and run terminates automatically in the event of certain malfunctions. Rotor flexibility: Supports a wide selection of rotors (fixed-angle, swinging bottle/bucket, continuous flow), including composite carbon-fibre rotors for higher performance / durability

Condition: used, This listing is for a Thermo Fisher Scientific RC 3BP+ Centrifuge The unit is in full working condition and is ready for immediate release. Key Features & Capabilities The RC 3BP Plus is designed for large-batch/volume processing: for example one rotor option handles 6 × 1 000 mL bottles or 12 blood-bags. Maximum speed of up to 5 000 rpm, producing a maximum relative centrifugal force (RCF) of about 7 277 ×g. Refrigeration/temperature control: The unit offers temperature setting range roughly from –10 °C to +40 °C (or around +2 °C to +40 °C depending on source) and is capable of keeping sample chamber temperature stable. Microprocessor control with programmable run-profiles: 15 stored programs, features such as “Accumulated Centrifugal Effect (ACE)”, Step-Mode runs, slow-start/stop, etc. Quiet & robust operation: Noise level at maximum speed is under ~58 dBA. Safety and build quality: The rotor chamber, baseframe and guard ring are made of high-strength steel; automatic lid lock; electronic imbalance detection; door cannot open during spin; machine cannot start if door open. Chodjxukh Eopfx Aaqed Technical Specifications (summarised) Here are some of the important specs to consider: Maximum speed: 5,000 rpm. Maximum RCF: ~7,277 ×g. Minimum speed: ~300 rpm. Temperature control range: Approximately –10 °C to +40 °C (or +2 °C to +40 °C depending on spec sheet) for samples. Capacity: 6 × 1 000 mL bottles or 12 × 250 mL blood bags (depending on rotor/adapter). Noise at max speed: < 58 dB(A). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). (≈981 lb) Drive: high-performance induction motor Intended Usage & Applications This centrifuge is suited for laboratories that need to process large volumes and relatively low speeds (compared with ultra-centrifuges). Some typical uses include: Blood banking/separation of large bag volumes. Bulk processing of bottles (1 L size) for sample prep. Applications where sample temperature control is important (hence the refrigeration). Labs requiring strong reproducibility via programmable runs, slow-start/stop, step modes

Condition: used, This listing is for the Sartorius Tare ENTRIS2201-1S Balance + Tare Printer The unit is in full working condition and is ready for immediate use The Sartorius ENTRIS2201‑1S (also referred to as ENTRIS 2202‑1SUS in some regions) is a precision top-loading laboratory balance designed for reliable, accurate weighing of samples up to approximately 2,200 g with 0.01 g readability. Key Specifications: Capacity: 2,200 g Readability (Resolution): 0.01 g (10 mg) Repeatability: Typically 0.01 g Linearity: Approximately 0.03 g Weighing Pan Size: Around 182 mm × 182 mm (7.1″ × 7.1″) Calibration Type: External calibration (requires separate calibration weight) Display: Backlit, high-contrast screen for clear visibility Interface Options: RS‑232 port for communication with PCs or printers Built-In Functions: Includes modes for basic weighing, counting, percent weighing, animal weighing, and density determination Language Support: Multiple languages supported such as English, French, German, Italian, Polish, Russian, Spanish Other Features: Anti-theft locking capability, easy-to-clean removable pan and draft shield Csdpsxui S Aefx Aaqohd Stabilization Time: Approximately 1.5 seconds Dimensions & Build: Compact size, robust design ideal for lab environments

Condition: used, This listing is for a Hulme Martin 10/3319 Heat Sealer The unit is in full working condition and is ready for immediate release. Csdpfxsxuiv Ie Aaqjhd This is an mpulse heat sealers (for like-for-like thermoplastic film welding), constant heat sealers (for laminated or foil materials), vacuum sealers and other ancillary equipment. Designed for durability (20+ years or more in service according to their marketing) and easy servicing via plug-in heater bars and affordable consumables.

Condition: used, This listing is for a Waters fraction Collector 111 chromatography system The unit is in full working condition and is ready for immediate release. The Waters Fraction Collector III is designed for flexible fraction collection in both HPLC and LC-MS workflows. Cjdpfxextbcqs Aaqjhd It supports high flow rates, up to ~300 mL/min. It accommodates a wide variety of collection vessels/racks. For example: standard test-tube racks (13-18 mm O.D.), eppendorf tubes, scintillation vials, microtiter plates (4 × 96/384), and preparative funnel racks (4 × 32 positions). Multiple operational modes for fraction collection: time-based, volume, drop count, signal (e.g., detector threshold), peak mode (peak end time, request time, up to 10 out of 99 peaks) and window mode (start/end times) etc. The system is controllable either locally (via keypad + LCD) or remotely via software (e.g., Empower 3, MassLynx) for integration into automated purification workflows. Low nozzle-shift time (0.1 s between tube centers) helps minimise dead time between fractions. Diverter valve option: allows unwanted flow (e.g., column void, non-target peaks, excess solvent) to be diverted to waste, improving collection efficiency

Condition: used, This listing is for a 2Mag MIXcontrol 20 control unit for MIXdrive The unit is in full working condition and is ready for immediate release. It is a universal control unit for connecting one MIXdrive stirring drive. Speed range: 100 to 1,600 rpm. Chsdpfx Ajxrt U Ajaqjd Maximum stirring power: 20 W. 4-step power setting for 25 %, 50 %, 75 % and 100 % output power — helpful when stirring large or viscous media (so you can choose “high power” vs “reduced power for continuous operation”). SoftStart feature: ensures reliable catching/centering of the stirring bar and safe acceleration at different speeds/viscosities. QuickSet: allows rapid setting of start‐ and maximum speed. Automatic memory function: remembers the last settings after power‐off, so when you power on you resume from last speed/power. Housing: Stainless steel material — robust, easy to clean, intended for intensive lab use. Interfaces: Besides standard model, versions are available with RS232, and optionally 0-10 V, 4-20 mA, USB, Ethernet, OPC UA, etc for integration into automation/data acquisition systems. This unit is designed to work with MIXdrive stirring drives of various sizes: e.g., MIXdrive 1, MIXdrive 6, MIXdrive 15, MIXdrive 60 and their high‐temperature “HT” versions. The manual emphasises that the choice of control unit greatly affects performance & comfort of the stirring drive Important: Proper matching of the stirring drive model and the control unit is required to avoid overload or damage. For instance, some smaller drives require the “eco” version.

Condition: used, This listing is for a IKA Midi MR1 Digital Magnetic Stirrer. We have 4 available The unit is in full working condition and is ready for immediate release. Chedpfxsxrt Ivo Aaqed The IKA Midi MR 1 is a digital magnetic stirrer (without heating), designed for laboratory mixing tasks. It is part of IKA’s IKAMAG line of magnetic stirrers. “Magnetic stirrer” here means that a magnetic stir bar inside the vessel is rotated by a rotating magnetic field created by the unit, thereby stirring the liquid. Because it doesn’t include a heating function, it’s suitable where temperature control must be handled separately (e.g. with external heating or thermostatic baths)