Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, High-precision drilling and milling machine Fehlmann Model Picomax 54 Heidenhain TNC 310 Very good condition Technical specifications: >> Year of manufacture: 2000 Machine no. 14099667 >> Travels X/Y/Z 500/250/160 mm >> Travel W 480 mm >> Clamping area (L x W) 885 x 320 mm >> Maximum table load 250 kg >> Distance between table and spindle nose 0 – 605 mm Cgsb Ecvsv S Ew To Ubjt >> Feed rate X/Y 1 – 2000 mm/min >> Feed rate Z 1 – 1200 mm/min >> Quick tool change system SF 32 >> Speed range continuously variable 9200 rpm >> Drive power 5 kW >> Space requirements (W x D x H) 1850 x 2550 x 2400 mm About the machine: Offered is a high-precision drilling and milling machine Fehlmann Model Picomax 54 in very good condition. It is equipped with a Heidenhain TNC 310 contouring control. Programming is particularly easy thanks to the user-friendly Heidenhain conversational programming. HEIDENHAIN TNCs are workshop-standard contouring controls that allow you to program conventional milling and drilling operations directly on the machine using easy-to-understand conversational programming. The machine runs very smoothly at maximum speeds. Mechanically and electrically tested. Take advantage of the opportunity to view and try out this machine on-site with power.

Condition: like new (used), Year of construction: 2016, operating hours: 8,900 h, Functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 330 mm, spindle speed (max.): 18,000 rpm, overall weight: 7,000 kg, Selling a well-maintained 5-axis simultaneous machining center Hermle C12U with a PW100 6-way pallet changer and a Heidenhain TNC640 control! Spindle was replaced on 02/2024! Travel paths: X: 350mm Y: 440mm Z: 330mm Swivel range: +/- 115 degrees Rotation range: 360 degrees Equipment: Control: Heidenhain TNC 640 incl. Dynamic Efficiency incl. Dynamic Precision Control panel standard right Tool changer: 71-way 36 standard + 35 in additional magazine Linear axes standard version NC swivel rotary table STP diameter 320mm PW100 Automatic cabin roof including side part Hydraulic and pneumatic extension Pallet changer PW100 6-way left 320mm x 320mm Scraper belt conveyor right Laminated glass safety windows Fluid box doors KinematicOpt. Hardware HIMS- Hermle information and monitoring software Event messenger Condition monitoring Spindle 18000 rpm Spindle mount: HSK-A63 System control IKZ 80 bar including paper belt filter and police filter Locking air for the scales Vario pressure relief valve Blow-off device Blowing air through the center of the spindle Chip flushing gun Electrical heat compensation Electrical handwheel Heidenhain measuring probe Cgob Ecjvzrihjv Ubjt Blum tool break/measurement A2 Signal light including warm-up function Accessories: 7 pallets, 6 of which with Gressel center clamp and 1 with three-jaw chuck Machine is available immediately!

Condition: used, Universal Toolroom Milling Machine DECKEL Type FP 4 Machine No. 1, Year of Manufacture 1978 Travel X: 700 mm, Y: 400 mm, Z: 450 mm Table Clamping Area 860 x 500 mm Spindle Mount SK 40 - M16 Spindle Speed 31.5 - 1600 rpm, 18 Steps Quill Shift Horizontal and Vertical Main Spindle Drive 4 kW Power Supply 380 V, 50 Hz - 3-Axis Digital Display HEIDENHAIN - Universal Tilting and Swiveling Rotary Table - Coolant System in Machine Base - Machine Vice - Without Tools Space Required L x W x H 2100 x 1750 x 1900 mm Cgsb Ecv Ujv Srf Dobjt Weight Approx. 3 tons.

Condition: new, Optimum OPTImill MZ 2S tool milling machine With digital 3-axis position display DP 700 from NEWALL. With inverter drive of the feed axes controllable from the control panel. Versatile application range Excellent damping characteristics and stability of the machine frame All guideways hardened and precision ground and adjustable by means of taper bars Automatic feed in X, Y and Z axes, infinitely adjustable via an electronic joystick on the control panel Electric feed limit stop Ball screw in all axes Central and clearly arranged control panel with integrated digital position and speed display Massive cross table, large dimensioned and precisely surface machined with 5 T-slots Coolant device Large dimensioned handwheels with scale Machine lamp Quiet running Manual central lubrication TECHNICAL DATA Dimensions and weights Length (product) approx. 1239mm width/depth (product) approx. 1168mm Height (product) approx. 1900mm weight (net) approx. 1400kg Drilling-milling head Cgjb Ecv Ujfnh Sgsbst milling head swivel range ± 90 Drilling-milling capacity cutter head size max. 100mm drilling capacity steel (S235JR) 30mm Continuous drilling capacity steel (S235JR) 26mm End mill size max. 25mm Electrical data Power drive motor 2,2kW Supply voltage 400V Mains frequency 50Hz Horizontal milling table Horizontal milling table length 750mm Horizontal milling table width 320mm distance vertical spindle - horizontal milling table min. 75mm distance vertical spindle - horizontal milling table max. 410mm Horizontal milling table T-slots size 14mm Horizontal milling table T-slots number 5 Horizontal milling table T-slots distance 63mm Distance horizontal spindle - horizontal milling table min. 70mm Distance horizontal spindle - horizontal milling table max. 400mm Horizontal milling table load max. 285kg Milling table vertical Vertical milling table length 830mm Vertical milling table width 250mm Vertical milling table T-slots size 14mm Vertical milling table T-slots number 2 Vertical milling table T-slots distance 63mm Coolant system Coolant pump(s) Drive power 95W Travel Travel X-axis manual 400mm Travel Y-axis manual 200mm travel Z-axis manual 335mm Travel X-axis automatic approx. 310mm Travel Y-axis automaticapprox. 160mm Travel Z-axis automatic 295mm Vertical spindle Vertical spindle throat 100mm Vertical spindle Spindle mounting ISO 40 DIN 2080 Vertical spindle speed range 50 - 1890min¯¹ Vertical spindle number of speed ranges 12steps Vertical spindle tightening rod M 16 Vertical spindle quill stroke 120mm Vertical spindle load max. 1100Nm Feed speed Feed speed X-axis 10 - 600mm/min feed speed Y-axis 10 - 600mm/min feed speed Z-axis 10 - 600mm/min Electrical connection Total connected load 4kW Motor(s) rapid traverse X-axis power drive motor 0,375kW rapid traverse Y-axis power drive motor 0,375kW Rapid traverse Z-axis power drive motor 0.375kW SCOPE OF SUPPLY: Adapter ISO 40/MK3 adapter MK1 and MK 2 Milling spindle horizontal milling Ø 27 mm Operating tool

Condition: like new (used), 4 x Depth Clamps, Type 6490-14 Width = 40 mm Length = 80 mm Groove Width = 14 mm Cgjb Ecov Tmgfsv Ubet Thread = M10

Condition: excellent (used), Year of construction: 2004, travel X / Y / Z: 450 / 300 / 350 mm table size W x D: 800 x 400 mm quill stroke: 105 mm Cob Eeguu Iwecv Ubsgt spindle speed: 63 - 3150 rpm / 18 steps tool holder: ISO 40 / DIN 69871 accessories: coolant unit, machine manual, machine light weight: approx. 1350 kg dimensions W x D x H: approx. 1500 x 1590 x 1690 mm This machine is the same machine as the manufacturer EMCO, model FB-4.

Condition: excellent (used), Year of construction: 1996, Functionality: fully functional, Controller: Heidenhain 320 X – Travel: 5000 mm Y – Travel: 1000 mm Z – Travel: 1000 mm Table L = 5500 mm x W = 950 mm Table load: 25000 kg. Cjb Ecv Ujwb Ebpebsgt Spindle taper: Iso 50 Power on spindle 30 kW Spindle speeds / ranges: 60 – 3000 rpm CNC milling head

Condition: reconditioned (used), Universal tool milling machine Cgeb Esvfdatjcv Ubjt Make: harich (DECKEL) Model: B (FP 2) stepless reconditioned with CE geometric acceptance with test report with guarantee Accessories: - 3-axis digital display FAGOR Innova 30i-M - fixed table or universal table - vertical milling head SK 40 - central lubrication, manually operated - coolant system - operating instructions CE and safety equipment: - new machine electronics with control cabinet - cover cap on the vertical milling head with electrical protection - chuck protection hood with electrical protection - drive motor with braking function - control panel with emergency stop, release, start and stop buttons, potentiometer for feed control - new documentation for machine and control cabinet - CE declaration of conformity

Condition: used, x-travel 300 mm y-travel 300 mm z-travel 400 mm Control Dialog 11 main spindle: turning speed range - main spindle 40 - 4000 min/-1 tool taper SK 40 swivellable +/- 90 ° quill stroke 80 mm In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Accessories: - Cabin Accessories, tools and clamping devices shown Ceb Eevdt Uqecv Ubjgt are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as prior sale reserved!

Condition: new, ELMAG universal milling machine model UFM 125 Unique '2 in 1' concept The swivel head of the UFM 125 can be adjusted to almost any angle and, in addition to normal face and end milling work, enables the machining of fitting surfaces and grooves in difficult spatial positions. For face milling large workpiece surfaces, the machine can be converted into a horizontal milling machine in just a few simple steps (horizontal spindle on the swivel head). Thanks to the high drive power of 2,200 watts, the machine is suitable for face milling cutter diameters of up to 125 mm. The machine is equipped with an automatic cross table feed for the X and Y axes and rapid traverse for the Z axis for rapid table positioning. 11 speed levels and 9 feed levels provide sufficient scope for optimizing the cutting speed. Csb Ecvjt Ef Eys Ubsgt Central lubrication of the guideways for rapid availability and a coolant system with tank in the machine base are very advantageous. The UFM 125 is ideal for single and small batch processing. Standard equipment Digital position display Collet set 4, 5, 6, 8, 10, 12, 14 and 16 mm with collet chuck Tool set Operating instructions / CE ADVANTAGES Automatic feed X/Y/Z Milling capacity Ø 125/40 mm Cubature 1,120 x 260 x 500 mm Spindle projection 60-500 mm Table travel 600x300 mm Tilting milling head ±180° Easy conversion to horizontal milling machine Drive motor 2,200 W Wide speed range Clockwise and counter-clockwise rotation Milling spindles with precision bearings Tightening spindles for high safety Milling spindle protection cover Smooth-running, precise cross table with T-slots and coolant channel X- and Y-axis cross table with 9 feed steps Cross table Z-axis with drive Central lubrication Integrated coolant system with return, tank in the machine base LED milling table lighting With digital position display TECHNICAL DATA Milling capacity face milling cutter 125 mm Milling capacity end mill 40 mm Cubature 1120x260x500 mm Spindle holder (turning spindle) ISO 40 Vertical speed range 45 - 1660 rpm Vertical speed steps 11 Horizontal speed range 45 - 1660 rpm Coolant pump 90 W Horizontal speed stages 11 T-slots / width x distance 5 / 14 x 50 mm Spindle projection 60 - 500 mm Milling head swivel range ± 180 ° Quill distance table 80 - 500 mm Horizontal spindle distance table 40 - 470 mm Milling table stroke 420 mm Milling table surface 1120 x 260 mm Table travel X x Y 600 x 300 mm Feed rates X/Y 24 - 402 mm/min Feed steps X/Y 9 Feed Z 1200 mm/min Motor power 2200 W Feed drive X/Y 550 W Feed drive Z 750 W Mains connection 400/50 V/Hz Length x width 1655 x 1325 mm Height 1730 mm Weight 1480 kg

Condition: like new (used), 4 pieces, Type FL10-013, Cebsv Tlvlj Ecv Ubjgt Width = 44 mm Length = 112 mm Groove width = 14 mm Thread = M12

Condition: like new (used), Temperature range: 10 - 40 °C Power consumption: 2750 W / 9 A Csb Ejrypcajcv Ubsgt As good as new, never used

Condition: used, x-travel 560 mm y-travel 500 mm z-travel 410 mm Control Deckel Dialog 11 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Cobevduahs Ecv Ubjgt Subject to changes and errors in the technical data and information as well as prior sale!

Condition: new, ELMAG WFM 210 Servodrive tool milling machine Incl. 3-axis position indicator Csb Ecvetw Akrj Ubsgt Ready for operation: incl. oil filling, de-preserved (degreased), completely assembled and test run carried out. The milling machines in the Servodrive series combine precision and economy and make the heart of every metal technician beat faster. The top ergonomic combination impresses with easy handling, infinitely variable speed control and an excellent price-performance ratio and is ideal for workshops, training companies and toolmaking. Standard equipment: - Digital position indicator - 4 long milling arbors 16, 22, 27, 32 mm - 3 reduction sleeves MK 1, 2, 3 - Operating instructions / CE ADVANTAGES: Automatic feed and rapid traverse X/Y/Z - Milling capacity Ø 125 / 40 mm - Ball screw on all axes X/Y/Z - Stepless drives on all axes - Coolant tank integrated in the cast base - Digital 3-axis position display - Horizontal and vertical milling table - LED milling table lighting - With +/- 90° infinitely variable swivel vertical milling head incl. degree scale - Incl. adjustable drill sleeve - Incl. included central lubrication - Digital speed display of the milling spindle - Rapid traverse on all 3 axes - Tiltable milling head +/- 45° Swivel control panel - Digital position display for maximum precision on all 3 axes - Milling spindle right and left rotation - Digital speed display - Potentiometer for infinitely variable control of the feed axes - Inching switch for rapid traverse of the milling axes - Coolant pump off/on - Emergency stop button TECHNICAL DATA: Drilling capacity in steel 50 mm Milling capacity face milling cutter 125 mm Milling capacity end mill 40 mm Spindle holder (turning spindle) ISO 40 Speed range 40 - 2000 rpm Infinitely variable speed steps Quill stroke 65 mm Milling table grooves / width x distance 5 / 14 x 63 mm Vertical grooves / width x distance 3 / 14 x 63 mm Spindle projection 180 - 485 mm Milling head swivel range ± 45 ° Quill spacing table 50 - 450 mm Horizontal spindle distance table 145 - 545 mm Milling table surface 750 x 320 mm Table travel X x Z 405 x 305 mm Vertical table surface 890 x 225 mm Feed rates X/Y/Z 10 - 1000 mm/min Feed steps X/Y/Z stepless Motor power 3700 W Torque X-axis 7.7 Nm Torque Y-axis 7.7 Nm Torque Z-axis 1.7 Nm Mains connection 400/50 V/Hz Cubature 750x320x450 mm Length x width 1500 x 1700 mm Height 2000 mm Weight 1450 kg

Condition: good (used), Travel X / Y / Z: 475 / 330 / 280 mm Table size W x D: 650 x 250 mm Quill stroke: 60 mm Spindle speed: 63 - 2800 rpm / 12 steps Cgsb Ecved Dgdyj Ubjt Mounting cone: ISO 30 / DIN 2080, ISO 40 / DIN 2080 Weight: approx. 950 kg Machine size W x D x H: approx. 1100 x 1400 x 1600 mm Spindle bore: 17.8 mm (24.8 mm) Movement range: Longitudinal travel. table: 330 mm Table: 330 mm* 1 handwheel rotation: 5 mm Vertical travel: Console: 475 mm* 1 handwheel rotation: 2 mm Transverse travel: Milling spindle carrier head: 400 mm 1 handwheel rotation: 5 mm *These two directions of movement are provided with automatic feed and can be controlled by programs. Shortest cycle time 15 seconds, or 4 program sequences per minute. Reading accuracy at the scale drums: 0.02 mm Main motor: Milling head 2 speeds Engine: 1.1/1.5 kW, 1500/3000 rpm Automatic feeds: Rapid speed motor: 0.55 kW, 1000 rpm Rapid traverse lengthwise: 2500 mm/min Rapid traverse vertical: 1000 mm/min Working feed motor: 0.2 kW max. Control range in longitudinal direction 4 - 500 mm/min Control range in vertical direction: 1.6 - 200 mm/min Coolant device: Engine: 0.15 kW, 3000 rpm Coolant pump capacity: 20 l/min Coolant tank capacity: 30 l

Condition: used, Year of construction: 1986, x-travel 300 mm y-travel 300 mm z-travel 400 mm Control Dialog 4 In our opinion, the machine is in very good used condition and can be viewed under power by appointment. Ceb Ecjvtgwkov Ubjgt including round table Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: good (used), A lot of accessories, is only offered completely! Cgeb Ecod Erqbsv Ubst Travel X / Y / Z: 300 / 300 / 135 mm Table size W x D: 700 x 190 mm Spindle speed: 95 - 6000 rpm / 11 steps Tool holder: W 20 Weight: approx. 450 kg Machine size W x D x H: approx. 900 x 900 x 1500 mm Accessories: Swivel table Round table Ø 200 mm 6 shots Various collet chucks and clamping devices Horizontal milling device work lamp coolant system vice

Condition: used, x-travel 560 mm y-travel 500 mm z-travel 410 mm Control Deckel Dialog 11 In our opinion, the machine is in good used condition and can be inspected Cgjb Ejvduanjcv Ubet under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: good (used), Year of construction: 1980, - Table size: 1250x350 mm - Travels X / Y / Z: 850 x 250 x 470 mm - Spindle mount: ISO40 - Spindle speeds: 45-2000 rpm. / à 24 steps - Horizontal and vertical spindle in the same milling head - Swiveling in the head: +/- 90 ° - Gear bar displaceable (Y axis) - digital display Heidenhain (3 axes) - Coolant pump - div. on accessories Ceb Ejdux Hgscv Ubogt - Weight: about 2150 kg - Space required: approx. 1900 x 2000 x 1700 mm

Year of construction: 2002, Condition: used, electr. connected load 3x400V / 50 HZ installed capacity: 84 KVA amperage - max. max. 120 A Required air-pressure min. 5 bar In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Cobov N Rans Ecv Ubegt Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, x-travel 800 mm y-travel 600 mm z-travel 550 mm Control Deckel Dialog 11 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well Cobjvdt U Ro Ecv Ubogt as prior sale!

Condition: used, x-travel 400 mm y-travel 200 mm z-travel 400 mm turning speeds 2.000 U/min Cgsb Ecvev Irk Ss Ubst In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Year of construction: 2002, Condition: used, electr. connected load 3x400V / 50Hz installed capacity: 104 KVA current intensivity max. 150 A Required air-pressure min. 5 bar In our opinion, the machine is in good used condition and can be inspected under power by appointment. Cgsb Ecvev N Rabe Ubet There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Year of construction: 2013, Condition: used, In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Cgeb Ecvov N Rbxo Ubjt Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, x-travel 560 mm y-travel 500 mm z-travel 410 mm Control Heidenhain TNC 355 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Cob Ecjvdt U Dov Ubjgt Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!