Condition: used, Year of construction: 1996, Machine is in operation and can be tested on site in Leonberg. Travel paths: o X-axis: 600 mm o Y-axis: 450 mm Cgoliqxoq Iidbs Srst o Z-axis: 500 mm Table: o Clamping surface: 900 x 520 mm o Maximum table load: 450 kg Spindle: o Speed range: 20 to 6,300 rpm o Tool holder: SK40 o Drive power: 8.6 kW Dimensions and weight: o Machine dimensions (L x W x H): approx. 2.95 x 2.20 x 2.30 m o Space requirement (L x W): approx. 4.55 x 3.60 m o Machine weight: approx. 4,900 kg • Control: o HEIDENHAIN TNC 426 Operating hours: o 78,796h

Condition: excellent (used), Year of construction: 1999, ZAYER Column-Traveling Bed-Type Milling Machine Type:30KCU 10 000 Year:1999 Control:HEIDENHAIN TNC430 XYZ travel:10000x1500x2700mm Spindle speed:35-3000rpm Toolchanger:60atc Rotary table:2500x2500mm, cross travel:1300mm Machine weight:42000kg Floor plates not being sold Celisv U I S Esqx Srogt Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing, since machines are in production at time of photos and availability can not be guaranteed. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, Kunzmann WF7/3 tool milling machine with Heidenhain TNC 310 contouring control. Excellent condition, CE-compliant! Technical specifications: >> Year of manufacture: 2005, machine number: 370552 >> Milling table clamping area: 800 x 425 mm Clamping slots: 6 Slot width: 14 H 7 Slot spacing: 63 mm Maximum load: 300 kg Cgjliqev Nh A Tex Srot >> Speeds up to 4500 rpm >> Feed range up to 2000 mm/min Rapid traverse up to 5000 mm/min >> Travels X/Y/Z: 600/400/400 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 2000 kg >> Dimensions approx.: 2 x 2 x 2 m >> Main drive motor: 5.5 kW Accessories and equipment: >> Heidenhain TNC 310 contouring control >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating manual >> Fully protective cabin >> Coolant system About the machine: Offered is a Kunzmann WF7/3 tool milling machine with a Heidenhain TNC 310 contouring control. This universal milling machine is in very good condition. The control system is very easy to operate. Furthermore, the machine features hydraulic clamping, vertical and horizontal. Converting from vertical to horizontal is very easy, simply by folding away the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site under power.

Condition: used, Year of construction: 2007, HAAS TM-1P (2007) Price: €12,000 Additional Information: • We are the original and only owners • Full service and maintenance history is available •Maintained exclusively by the official Haas representative Reason for Sale: Cgoliqxevt Rr So Sret We are upgrading to more modern equipment and need to free up space in our facility. Transportation: The buyer is fully responsible for arranging transportation, selecting the carrier, and covering all associated costs.

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, AVIA VMC 1000 CNC milling machine TECHNICAL DATA: Year of manufacture 2006 X 1000 mm Y 540 mm Z 620 mm Control HEIDENHAIN iTNC 530 Table clamping area 1 200 x 540 mm Max. speed 10 000 rpm Cgsliqsv A T Unex Srjt Rapid traverse (x/y/z) 42 / 42 / 42 m/min SK40 Number of tool positions 24 Cooling system IKZ Flushing system On-time hours approx. 11 600 hours Space requirement approx. 3.4 x 2.6 x 2.8 m Machine weight approx. 5 100 kg We believe the machine is in very good condition and can be inspected under power by appointment. Loading included. We will help you organize the transport.

Condition: used, Year of construction: 2020, Functionality: fully functional, Equipment: documentation/manual, FMC 340 is a fully automatic machining centre for machining aluminium profiles. Csliqsv Uk Tlsx Srjgt

Condition: good (used), Functionality: fully functional, travel distance X-axis: 825 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 425 mm, Neat, in good condition, universal milling machine with table dimensions 1150 x 250 mm, spindle mounting ISO-40. Equipped with Heidenhain digital readout 3 axes, machine clamp and various tool mountings. Cgolijv Ur H Teqx Srst

Year of construction: 2003, Condition: ready for operation (used), General Data Measurements width 1950 mm Measurements depth 5200 mm Measurements height 2900 mm Machine weight 4500 kg Main Drive Spindle speed range 23000 Tools Number of station 24 This MIKRON Multistar CX 24 Rotary Transfer Machine was manufactured in the year 2003 in Switzerland. It excels in accurately producing part families and intricate workpieces in large quantities. Its table index offers exceptional repeatability of ± 2.5 µm. With 24 stations equipped with up to 44 machining units, it ensures incredibly high output rates. This Rotary Transfer Machine located in Germany comes with loading station (brass D= 3.9mm), unloading station, part selector (8 compartment, see picture), lateral drilling unit, rotating straightener (October 2023 completely new in stock), feed / sawing unit (control and inverter overhauled in 2021), pneumatic loading (via feed pipe), chip conveyor with waste water pump, KNOLL coolant system (2,000 liters) with drum screen filter, flushing pump and vacuum pump including low-pressure pump (5 bar) and high-pressure pump (60 bar). Tailored for industries such as electrical, automotive, gas, medical, and watchmaking, the Mikron Multistar CX-24 is renowned for its precision, speed, adaptability, and ability to be tailored to specific needs – making it a standout performer in its class. Several modifications have been made for this machine, from cables replacement to complete overhaul of the saw (see extra information below for full description of all modifications). Product brochures (DE/EN) attached for more details information on technical specifications. Contact us anytime for further questions. Cgsliqxsv I Hf Do Srjt Application Types Milling

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, 3-Axis Active Linear Control Heidenhain TNC 123 Speed 40 - 2000 rpm, geometrically stepped direct drive with 16 gear stages for maximum torque/milling performance Feed 5 to 500 mm/min, continuously variable Rapid traverse 1.2 m/min Quill: Extendable quill, vertical 60 mm SK40 M16 drawbar thread X/Y/Z axes 300/160/340 mm Csliqx Ssv Nqu Eeregt Angle table 600 x 210 mm, max. load 200 kg

Condition: new, Motor power ----- 3.75 KW Speed range horizontal milling spindle ----- 58 ~ 1800 rpm Speed range vertical milling spindle ----- 58 ~ 3000 rpm Vertical spindle mounting ----- ISO 40 Horizontal spindle mounting ----- ISO 50 Table ----- 1650 x 360 mm Weight ----- 2200 KG INCLUDING * 3-axis digital readout brand SINO * Automatic feed work table X, Y, Z * Automatic spindle feed * LED lighting * Cooling system * Luxury control cabinet * Tiltable milling head left/right 0 - 45 degrees Cgjliqx Ssv Uzn Herst * Rotatable work table * Pneumatic pull rod

Condition: used, CME FCM-5000 5500mm x 950mm CNC Bed Mill Serial No.2317 Year of Manufacture 1994 Control Heidenhain TNC415 Table Size 5500mm x 950mm Longitudinal Travel X Axis – 5000mm Cross Travel Z Axis – 2000mm Vertical Travel Y Axis – 1200mm Longitudinal Travel & Vertical Feeds 10,000 mm per minute Spindle Taper ISO 50 Input 380 Volts 50 Cycles Spindle Motor 22 Kw Spindle Speeds 50 – 3000 rpm Cgjliqxjwaliwj Sret Feed Rate 4000mm per minute Fitted with16 Automatic Tool Changer Swarf Conveyor Nett weight approx. 32,000 Kgs

Condition: used, CNC 5-axis HMC - Horizontal machining center, milling center, machining center Manufacturer: LICON type Liflex 1266 PC B1 Year of construction 2016, commissioning 2017 with CNC path control SIEMENS 840D SL (Solution Line) with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/- 135° (270°) B-axis 360° endless Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm Swivel speeds A-axis 180° rotation in 4 sec. Interference circle diameter in the swivel bridge max. 1400 mm Transport load in the swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12000 rpm infinitely variable Spindle power 37kW at 40%ED Spindle torque at 40% ED 85 Nm Spindle torque max. 100 Nm Tool change time (chip to chip) approx. 3.7 sec. Tool diameter with occupied adjacent positions Ø 140 mm Tool diameter with free adjacent positions Ø 250 mm Tool length max. 400 mm Tool weight max. 20 kg Mains connection 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - Motor spindle LIFLEX MSP 80/63/85/12.000 (power 37kW/40%ED) with liquid cooling and recooling unit - 2-axis swivel rotary table LICON as B- and C-axis, with hydraulic axis clamping Coliqxot Ac Efj Srjgt - Zero-point clamping system on the rotary table of the swivel axis - 2-fold pallet changer, without pallets, these must be procured new) - Media transfer of 5 single-acting pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M functions) - Tool changer with 30 tool positions, as a disk turret - Machine designed for dry machining with MQL minimum quantity lubrication system - MQL-IKZ, internal MQL lubricant supply through the spindle - Scraper belt chip conveyor, ejection height 1150 mm - Licon ECO mode (energy-efficient unit operation) - Direct distance measuring system in all axes - read operating hours control voltage On = approx. 7500 h Space required for operation L x W x H 9000 x 6000 x 3800 mm Space required for transportation L x W x H 6100 x 4400 x 3600 mm Weight of basic machine approx. 24 tons Very good condition

Condition: good (used), Year of construction: 2009, operating hours: 21,000 h, Functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 60, TECHNICAL DETAILS Control: HEIDENHAIN iTNC 530 X travel: 6,000 mm Y travel: 1,200 mm Z travel: 2,000 mm C-axis: 0.001° (preparation) Movement and Dynamics Rapid traverse X/Y/Z: 30 m/min Table Table clamping area (L x W): 7,500 x 1,100 mm Table load: max. 5,000 kg Spindle and Tool Spindle drive power: 60 kW Spindle speeds: 6,000 rpm Tool holder: SK 50 Tool changer: 60 Accuracy Positioning accuracy: ±0.030 mm Coliqx Sewakxqsrjgt Repeatability: ±0.010 mm Head and axis options Automatic Universal swivel head: 1° × 1° 4th axis preparation: rotary table EQUIPMENT - Automatic universal swivel head - Accessories - Tools - Mounting fixtures - Preparation for rotary table (4th axis)

Condition: ready for operation (used), Year of construction: 2000, General Data Machine weight 22000 kg Main Drive Number of spindles 1 Spindle speed range 3000 RPM Spindle motor power 29.6 kW Tool taper ISO-50 Cgjliqouu Uvmex Srot Number of axis 5 Movement X-Axis Movement 3000 mm Y-Axis Movement 1200 mm Z-Axis Movement 1000 mm (Option for 2000 mm) Table Outer length 3500 mm Outer width 1000 mm Tslots size 8 x 22 mm Distance between 125 mm Table load 8000 kg This 5-axis Nicolas Correa A30/30 was manufactured in 2000. It features a large table surface area of 3,500 x 1,000 mm, capable of handling a maximum load of 8,000 kg. The spindle motor power is robust at 29.6 kW, complemented by rapid traverses up to 10,000 mm/min for efficient machining. Ideal for heavy-duty milling, the Nicolas Correa A30/30 machine we have for sale is a valuable addition to any workshop. Contact us for further details. Application Types Milling

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 18,000 rpm, table width: 630 mm, table length: 630 mm, table load: 1,000 kg, overall weight: 9,500 kg, Equipment: rotational speed infinitely variable, Selling a Hermle C30U 5-axis simultaneous machining center! Built in 2011 with a Heidenhain iTNC530 control! Travels: X: 650mm Y: 600mm Z: 500mm Swivel range A: +30/-115 degrees Rotation range C: 360 degrees Equipment: Control: Heidenhain iTNC530 Spindle speed: 18,000 rpm Spindle mount: HSK-A63 Tool changer: 32 positions NC swivel rotary table: 630mm diameter A-axis off-center 6-position rotary feedthrough 80 bar internal coolant with paper belt filter (Vario valve) Scraper belt conveyor Manual cabin door Manual cabin roof Safety screens Blum A2 tool measurement and breakage detection Heidenhain measuring probe Electrical heat compensation Chip flushing gun Bed flushing Air seal for scales Status light Pneumatic extension Release/reclamp M-functions NC stop on external signal etc. Accessories: approx. 30 HSK-A63 tool holders Heidenhain measuring probe Machine feet Complete documentation Celiqx Sev In Uterogt Machine will be available approximately in week 30 and ready for immediate use! Machine can be inspected under power by prior appointment. Videos can be provided upon request. Hours are subject to change, as the machine will be in production until the final cut! We will load the machine!

Condition: used, Year of construction: 2007, Functionality: fully functional, machine/vehicle number: HP510141, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, spindle speed (max.): 14,000 rpm, total length: 500 mm, table height: 500 mm, table load: 500 kg, number of slots in tool magazine: 40, Equipment: documentation/manual, Improved chip disposal Three tool blocks Three tool blocks in addition to machine Plenty additional tool and accessories within the machine Cgjliewcxm Usqx Sret You'll be responsible for arranging dismantling, packing, loading and transportation. Full payment must be made before loading.

Condition: used, Year of construction: 2002, x-travel 560 mm y-travel 270 mm z-travel 340 mm table surface area 1000x230 mm tool adaptor SK40 total power requirement 4 kW Cgjliqev H Eryox Srjt weight of the machine ca. 1,5 t required space 1,5 x 1,5 x 1,6 m

Condition: ready for operation (used), Year of construction: 1985, Available immediately from mold making: Reckermann universal milling machine Type FU 1000 Year of manufacture 1985 Heidenhain TNC 135 Table 1300 x 400 mm Travel X/Y/Z 1020/340/450 mm SK 50 Feed rates X/Y/Z 1000/1000/400 mm/min Rapid traverse X/Y/Z 4000/4000/1600 mm/min Spindle speeds vertical 32 – 1400 rpm Cgoliqx Sov U I I Toret Spindle speeds horizontal 32 – 2800 rpm Weight 4 tons Price €3,500 plus VAT ex works

Condition: used, Year of construction: 1990, Brand: ZAYER Model: 6000 CM3 CNC: Fagor 8055 (new) Table dimensions ( 1 rotary table): 3000 x 2000 x 350 mm Permissible table weight: 30000 Kg. Travels 6000 x 2000 z Speed: 25-1800 rpm Cslep Arngeiqx Srjgt Cone type: 50 Milling Head: Huron Number of tools: 60 Main engine power: 25 Hp Weight: 31000 Kg. Chip extractor

Condition: ready for operation (used), Year of construction: 2004, General Data Measurements width 3600 Measurements depth 6700 Measurements height 3370 Machine weight 12000 Main Drive Number of axis 4 Cgjliqxjv Ezmko Srst Movement X-Axis Movement 2500 mm X-Axis Rapid Traverse 25 m/min Y-Axis Movement 800 mm Y-Axis Rapid Traverse 25 m/min Z-Axis Movement 1000 mm Z-Axis Rapid Traverse 25 m/min Table Outer length 2700 mm Outer width 850 mm Tslots size 22 mm Number of tslots 5 Table load 4000 kg Tools Max tool diameter 125 mm (with adjacent tools) Max tool length 250 mm Media Chip conveyor Yes Internal cooling Yes Additional Equipment Electronic Handwheel 4th Axis / Divisor (4th Axis) Full Enclosure Various Tools This 4-axis Soraluce TA-25A was manufactured in 2004. Ideal for precision CNC milling, this machine offers robust construction and reliable performance. Consider the opportunity to buy this Soraluce TA-25A CNC milling machine. Contact us for more information. Application Types Milling

Year of construction: 1980, Condition: used, Bed Milling machine Bed Miller Model: CNC positioning and conventional Manufacturer: FIAS Berico Type: AF CNC: Siemens OP7 positioning Travel X-Y-Z: 1530x750x750mm Table-dimensions: 1820x650mm Spindle-speed: 30-2000rpm Spindle-take: ISO50 Colov Umcisiqx Srsgt Including cabinet full with tooling and peripherals Machine-dimensions: 3200x2425x2450 (motor dismantled for transport) Machine-weight: 7500kg Video available from full functionality, just before disconnecting. - Year: 1980 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Year of construction: 2008, Condition: used, Price: On request CNC milling machine machining center Model: 3-axes Manufacturer: Narvik / Pinnacle Type: CNC - PK SV65 VMC / SV65 Controller: FANUC Year: 2008/09 Used for teaching in a school. In very good condition, very little and not intesive used. Work-table: 800x510mm Travel: 650x560x560mm Travel-speed: 10.000mm/min Positioning: 0,001mm Max. workpiece-weight: 600kg Spindle-speed: 8.000 rpm Spindle-take: BT40 Spindle-power: 5,5kW Toolholders: 20st Incl. toolholders en documents Machine-weight: 4500kg Machine-dimensions: 2600x2200x2650mm - Year: 2008 - Documentation available: Yes Cgolsv Ul Uqjiqx Srst Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Year of construction: 2000, Condition: used, Price: On request Working width 830 mm Working height 500 mm Power (kW) 5 kW Working depth 600 mm Mounting SK-40 Number of axes 3 Metal milling machine Model: Conventional Manufacturer: KLOPP Type: UFB Travel: 830x600x500mm Table dimensions: 1000x560mm Milling head rotatable Intake: SK-40 Spindle motor: 5.5kW Cgjliov Ul Taoqx Srot Spindle speed: 31.5-1400rpm Machine weight: 3000kg - Year: 2000 - Documentation available: No - Serial number: 50 EVO Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Year of construction: 1990, Condition: used, Empty weight: 3.500 kg Dimensions (LxBxH): 270 x 190 x 260 cm Colov Ul S Neiqx Srogt - Year: 1990 - Documentation available: No - Serial number: K30741 - Control: CNC - Transport dimensions: 2700mm x 1900mm x 2600mm (l x w x h) - Transport weight [kg]: 3500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Year of construction: 1997, Condition: used, Price: On request Cgjljv Ul S Asiqx Srjt - Year: 1997 - Documentation available: No - Control: CNC - Motor power: 22.0kW Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren