Year of construction: 2025, Condition: new, Functionality: fully functional, The “little economic miracle” is now also available as 5 axis machine. On the same mineral diecast basement as our HSC 350 MG the HSC 5A-125 MG was born. Therefore you can mill a 125mm cube (max. part diameter 150mm) from all sides and all directions, without remounting! And even much bigger parts are possible when you do not need all working directions the same time. With only 900kg still easy to handle but solid and strong enough for superior cutting volume and outstanding surface quality. The 40-station HSK-E25 tool changer belongs to standard equipment as well as a water cooled 40.000rpm spindle with up to 6kW power. Dobvev Uw Tlel N Txokl Our HSC 5A-125 MG is also extremely space efficient! With only 1060mm x 960mm x 2100mm (LxWxH, without operators panel) it fits through almost every door

Condition: refurbished (used), Functionality: fully functional, travel distance X-axis: 425 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 240 mm, spindle speed (max.): 42,000 rpm, table load: 60 kg, overall weight: 6,000 kg, 5-axis HSC milling machine Röders RXP500DS with linear direct drives in all axes and torque drives in the rotary axes. The machine is completely overhauled, tested and measured in our company. The machine meets the new machine tolerance again! Travel paths: X455mm, Y400mm, Z240mm Distance spindle/table: approx. 315mm - Linear direct drives in all axes - wear-free - 42-way tool changer - High-precision cooling device for the entire machine (hysteresis +/- 0.15K) - Measuring laser for fully automatic measurement of milling tools (length/diameter/contour/cone angle) and wear monitoring including tool cleaning before measuring - Handbox - Remote maintenance - Automatic 3D probe including calibration ball in the tool changer - Minimum quantity lubrication - HSK40E spindle with max. 42,000 rpm - Erowa ITS100 zero point clamping system integrated in the machine table - Automation package for retrofitting the machine with a pallet changer - Handbox A tour of the machine in Ready-to-use condition is possible at any time. You are welcome to find out more about the type and scope of our overhauled machines on our website or on our Hüttmann YouTube channel. Dkebvl N Tjtt Atwsxjl

Condition: used, x-travel 700 mm y-travel 250 mm z-travel 300 mm table-size 1000 x 230 mm Dsbvov T Nqyjl N Txokl spindle taper ISO 40 spindle turning speed range 35- 1500 U/min total power requirement 3,0 kW weight of the machine ca. 1,4 t dimensions 1,55 x 1,4 x 1,65 m Universal Milling Machine - Huron Head - Mounting Fixture for Huron Head - Horizontal Counterholder - Documentation - Coolant System - Machine Feet

Condition: reconditioned (used), Universal tool milling machine cover FP1: Technical data: -Working range X: approx. 300 mm -working range Y: approx. 150 mm -Working range Z: approx. 340 mm -swiveling angular table -Clamping surface: 260x600mm -T-slots: 5 -T-slot width: 12 mm -Spindle speeds:: 20 - 2000 rpm -speed range - vertical: 60 - 1200 rpm -speed range - horizontal: 95 - 1900 rpm -Speed steps working spindle: 12 -feed range: 10 - 500 mm/min -feed steps: 10 -spindle mounting: MK 4 -Pinhole stroke vertical: 60 mm -Total power requirement: 1.7 kW -machine weight approx.: 0.8 t -space requirement approx.: 0.9 x 1.05 x 1.55 m Scope of overhaul: -Complete renewal of the electronics (from a professional with circuit diagram!) -Cleaning -polishing of all blanks -New paint -exchange of various signs -Replacement of all standard parts (screws, handles, levers, hand wheels, oil sight glasses etc.) -bearing and sealing of the upper gear shaft -sealing of the coolant pump -Conversion of the feed axles to safety handwheels -reinstallation of the coolant lines -adjustment of the V-guides and axle clamps On request, the machine can be equipped with glass scales in all axes. The machine can be inspected and tested by appointment. Dkebvohv H Spjl N Txsl The machine transport and various accessories we offer you with pleasure.

Condition: ready for operation (used), Brand: CORREA Model CF-17 Type : FIXED BED Table size : 2000 x 700 mm Number of T-slots: 5 x 22 Distance between T-Slots: 125 mm X axis Travel : 2000 mm Djbvjv D Rqpsl N Txokl Y axis travel : 800 mm Z axis travel : 800 mm Rapid traverse: 12.000 mm Spindle nose: ISO 50 Diameter of front bearing : 85 mm Turning ranges : 20-3000 rpm Range : 5-5000 Spindle power : 17 kw Max. Weight carrying on table : 3.500 kg Machine weight: 9.000 kg

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, Kunzmann WF7 tool milling machine with Heidenhain iTNC 530 contouring control Excellent CONDITION CE compliant!! Technical data: >> Year of manufacture 2004 Machine no. 370546 >> Milling table clamping surface 800 x 425 mm Clamping slots 6 Slot width 14 H 7 Slot spacing 63 mm Maximum load 300 kg >> Speeds up to 5000 min-1 >> Feed range X and Y axis 10 m/min. Dobvl Nsv Hp Sqe Txjkl Z axis 7.5 m/min >> Rapid traverse X and Y axis 10 m/min. Z axis 7.5 m/min >> Travel X/Y/Z: 600/400/400 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 2800 kg >> Dimensions approx.: 2 x 2 x 2 m >> Power consumption 15KVA Accessories and equipment: >> Heidenhain iTNC 530 contouring control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions >> Fully protective cabin >> Spray gun in the interior >> Coolant system About the machine: A Kunzmann WF7 tool milling machine with a Heidenhain iTNC 530 contouring control is offered. This universal milling machine is in very good condition. A very easy-to-use control system. The machine also has hydraulic clamping vertically and horizontally. Converting from vertical to horizontal is very easy, by folding away the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann was mechanically and electrically tested by us. Take the opportunity to view and try out the Kunzmann on site with power on.

Condition: used, Wanderer 2DU900 Mechanical milling machine for iron, with accessories Dkebvl Newa A Abo Txel

Condition: refurbished (used), travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 60,000 m/min, feed rate Y-axis: 60,000 m/min, feed rate Z-axis: 60,000 m/min, spindle speed (max.): 36,000 rpm, table load: 800 kg, overall weight: 12,000 kg, Equipment: documentation/manual, Used HSC machine RXP800 -overhauled- Working area: - X-axis: 800 mm - Y-axis: 600 mm - Z-axis: 400 mm Dsbvljtt Agyo N Txskl The clearance height between the spindle nose and the machine table is 565 mm. Drives of the linear axes: - Linear motors in all axes. Feed rates 0 - 60,000 mm/min in all linear axes. Spindle: - HSK-E50 - Spindle speed rpm: 36,000 - Tool changer positions: 30 Equipment - Network connection: - Handbox - Tool measuring laser: Diameter and contour measurement, wear monitoring and breakage control of the milling tools. - 3D measuring probe - Remote maintenance Team Viewer - Workpiece cleaning - Simulation RMSCut with cut-out function - Minimum quantity lubrication - Emulsion cooling - Extraction Transport dimensions of machine: W 2,830 x L 4,100 x H 3,050 mm Weight: approx. 13,000 kg The machine is completely checked, measured and overhauled in our company. Please arrange a viewing appointment with us.

Condition: repair required (used), Functionality: limited functionality, Donau Sys machine: - Table dimensions: 3000 x 700 mm - Travel: X 2900 Y 700 Z 700 - Magazine for 7 tools - Spindle cone SK40 - belt transmission - Spindle speed 3000 rpm - Chip conveyor - Cooling around the spindle and through the spindle - Mitsubishi Electric MMIV 7.5.11 control - German language. Dsbvl Newayryo Txjkl Currently the machine is for a major overhaul. It worked until 2024. Dismantled from the production line - functional. Stored under a roof. It has not been used for a year. The last photo shows the machine in July 2024 at the time of dismantling from the production line.

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 10,000 rpm, total height: 2,700 mm, total width: 1,700 mm, total length: 2,000 mm, power: 0.01 kW (0.01 HP), CNC-Drilling and Milling machine, Control Heidenhain TNC 426, only 8500 h table size 380x920 mm, travel X/Y/Z/W - 500/350/610 mm, max. table load 250 kg, spindle speed stepless 50-10'000 rpm., spindle performance 10,2 kw, drilling capacity Ø 25 mm, tapping capacity M20, taper SK 30, tool changer 24 places, elektronic handwheel, central lubrication, oil mist filter, coolant refigitor, preparation for spindle coolant + Renishaw, lot of tools and holders, manual Dkebvjtvmtkol N Txjl

Year of construction: 1988, Condition: good (used), Lid FP1 Active with 3-axis Heidenhain digital readout, rigid table, SK 40 S20x2 spindle holder. Good working condition, ready for demonstration under power by arrangement. Dksbvlsrk Aaae N Txol

Condition: good (used), Year of construction: 1989, Lid FP1 Active with 3-axis Heidenhain digital readout, rigid table, SK 40 M16 spindle holder. Good working condition, ready for demonstration under power by arrangement. Dksbvl Njtp Nyfo Txol

Condition: good (used), Year of construction: 1991, Lid FP1 Active with 3-axis Heidenhain digital readout, rigid table, SK 40 M16 spindle holder. Good working condition, ready for demonstration under power by arrangement. Dsbvl Nstqclhe Txskl

Condition: good (used), Year of construction: 1981, Cover FP1 Active with 3 axes Heidenhain digital readout , 2 axes Active , rigid table , SK 40 S20x2 spindle holder. Good working condition, ready for demonstration under power by arrangement. Dsbvleuvgnqe N Txskl

Condition: good (used), Year of construction: 1980, Cover FP1 Active with 3 axes Heidenhain digital readout , 2 axes Active , rigid table , SK 40 S20x2 spindle holder. Good working condition, ready for demonstration under power by arrangement. Dkebjumcmqovl N Txjl

Year of construction: 1975, Condition: good (used), Lid FP1 tool milling machine, 2-axis Sony digital display, dividing head SK40, SK 40 spindle holder vertical, SK 40 horizontal, accessories: various collets and milling arbors, counter holder, good working condition, can be demonstrated under power by arrangement. Dsberhzcqevl N Txokl

Condition: good (used), Year of construction: 1975, Deckel FP3 tool milling machine with 3-axis Heidenhain digital readout, adjustable angle table, SK 40 spindle holder, accessories: various collets and milling arbors, counter holder. Good working condition, can be demonstrated under power by arrangement. Dksbvju Ezb Eel N Txjl

Condition: used, Year of construction: 1972, Macmon M 100 C tool milling machine , rigid table , MK 4 spindle holder. Ready for operation, can be demonstrated under power by arrangement. Dsbvjrgpluol N Txekl

Condition: good (used), Year of construction: 1990, Macmon M 100 E tool milling machine with 2-axis Elesta-Heidenhain digital readout from training department , rigid table , SK 40 spindle holder. Good working condition, can be demonstrated under power by arrangement. Dkobvl Norazzrs Txsl

Condition: good (used), Year of construction: 1975, Deckel FP2 tool milling machine with adjustable angle table, 2-axis Heidenhain digital readout, SK 40 spindle holder. Accessories: various collets and milling arbors, counter holder, good working condition, can be demonstrated under power by arrangement. Dobvsuclbnjl N Txekl

Condition: excellent (used), Year of construction: 1981, Deckel FP3 Active tool milling machine with 3-axis Heidenhain TNC 111 digital display, adjustable angle table, SK 40 spindle mount, accessories: various collets and milling mandrels, counterholder. Very good, operational condition. Can be demonstrated under power by arrangement. Dksbevl E Hzevl N Txel

Condition: good (used), Year of construction: 1995, Macmon M 100 E tool milling machine with 3-axis Elesta-Heidenhain digital display from the training department, rigid table, SK 40 spindle mount. Good working condition, can be demonstrated under power by arrangement. Djbvl N Tev Azb Njxskl

Year of construction: 1978, Condition: excellent (used), Macmon M 100 D tool milling machine with 3-axis Fagor digital display from training department , rigid table , SK 40 spindle mounting. Accessories : div. collets and cutter arbors. Very good working condition , can be demonstrated under power by arrangement. Dobvshtfubjl N Txskl

Year of construction: 1968, Condition: good (used), Cover FP2 tool milling machine , rigid table , SK 40 spindle mounting. Long displacement milling head , Accessories : div. collets and cutter arbors.,Counterholder , Good working condition .After consultation under power demonstratable. Dkjbvloqc Tg Hs N Txsl

Year of construction: 1997, Condition: good (used), Macmon M 100 RE tool milling machine with 3-axis Heidenhain digital display from training department , rigid table , SK 40 spindle mounting. Accessories : Electric spindle guard , div. collets and cutter arbors. Good working condition , can be demonstrated under power by arrangement. Dksbjhgmmzjvl N Txsl