Condition: excellent (used), Year of construction: 2012, x-travel 6800 mm y-travel 3400 mm z-travel 2000 mm Control HH iTNC 530 table dimension - longitudinal 6000 mm table dimension - cross 2500 mm table load 150 t tool change unit 80 Pos. dist. between columns - front to rear 4700 mm weight of the machine ca. 80 t dimensions of the machine ca. 12 x 11 x 7 m This portal milling machine is in good condition and can be inspected by arrangement be inspected under power at the seller's premises. Description: - 80-position tool changer with 40 positions ISO SK-50 / 40 positions HSK-63A - 4-fold automatic head changer - 2 pieces orthogonal milling head OAD with: --> Patented double Hirth serration with a pitch of 0.02 degrees --> Pitch of both swivelling axes 0.02 ° --> Tool holder ISO SK-50 --> Spindle speed: 20-6000 rpm --> 46kW drive power (100% ED S1) - 1 piece 2-axis fork milling head E5E (CAC II) with: --> simultaneous !! --> HSK-63A tool holder --> swivelling range C-axis: +/- 200° --> swivelling range B-axis: +/- 100° --> drive power 37kW --> Spindle speed max. 24000 rpm, 1 vertical spindle F-400 --> Spindle speed 4000 rpm Fjb Hacyovwgpzjpogb --> drive power 25kW IKZ 38bar with paper belt filter 2 chip conveyors (lengthwise channelling belt conveyor 1 cross conveyor Heidenhain longitudinal measuring rods in all three axes Z-axis with 4-fold linear guide Wireless measuring probe M&H 20.41 Multi BRANKAM machine protection system CMS-100 (collision protection) Working area cover (roof) can be opened at the rear and front BLUM tool measurement Heidenhain HR 550 FS radio handwheel X and Y-axis drive via rack and 2 pinions Z-axis drive via ball screw

Condition: excellent (used), Year of construction: 2007, Universal milling machine Manufactured by KUNZMANN. WF 650 Year of manufacture 2007 Technical specifications Manufacturer Kunzmann Type WF 650 Year of manufacture 2007 X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Clamping area 1000 x 600 mm Spindle mount SK 40 Spindle speeds 5 - 6500 rpm Quill stroke 60 mm Vertical head swivels +/- 90 Max. table load 400 kg Feed rates - longitudinal/transverse/vertical 0 - 4000 mm/min Rapid traverse 25 / 25 / 20 m/min Distance between table and vertical milling spindle 100 / 550 mm Distance between table and horizontal spindle 270 / 720 mm Number of tool magazine positions: 20 Tool diameter: 95 mm Tool diameter with 2 free positions: 135 mm Max. tool length: 300 mm Max. tool weight: 7 kg Spindle power: 13 kW Total power requirement: 20 kVA Machine weight: approx. 5.5 t Machine dimensions: L x W x H: 3.80 x 2.70 x 2.40 m Equipment Fjb Hswhm S Nsacypegb - Heidenhain iTNC 530 control system - Operating instructions - Enclosure - Vertical head with extendable spindle sleeve - Hydraulic tool clamping - Fixed table - Electronic handheld control panel - Coolant system - Chip conveyor All information is subject to change without notice. A demonstration is available at any time in our showroom.

Condition: good (used), x-travel 300 mm y-travel 340 mm z-travel 250 mm Fob Hacjucphxsypegb total power requirement 1,5 kW weight of the machine ca. 0,8 t Heidenh. 3 axes aktiv digital display Year of construction unknown

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Type: UWF 902 S Year of manufacture: 1995 Operating hours: 65,071 Fgsb Hacyov Rxa Sepob Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Speed range: Spindle speeds continuously adjustable within 3 switching steps: 20 to 6,300 rpm Tool holder: SK40 Tool changer Tool holder, horizontal and vertical: ISO 40 DIN 2079 Hydromechanical tool clamping, clamping force (vertical): 10,000 N Hydromechanical tool clamping, clamping force (horizontal): 12,000 N Spindle diameter at the front bearing, horizontal / vertical: 75 / 55 mm Quill diameter 100 mm, extendable vertical: 75 mm M & H 3D Buttons Individual feed motors for each axis – three-phase (brushless) Feed range in X, Y, and Z manual/programmable: 1 to 2000 / 10,000 mm/min. Feed force in all axes (at 80% duty cycle): 6,000 N Rapid traverse in all axes: 10 m/min. Angle table: 900 x 458 mm Table weight: 275 kg Maximum table load: 500 kg Number of T-slots: 7 T-slot spacing: 63 mm T-slot width: 14 H7 Universal clamping table, tilt range 15° from and 30° to the machine Tabletop swivel range +/- 25°: Ø 420 mm Tabletop swivel range +/- 30°: Ø 650 x 395 mm NC rotary table: Tabletop swivel range +/- 30°: Ø 500 mm Tabletop swivel range +/- 4°: Ø 650 mm Probe system Counterholder with counter bearing Chip conveyor with chip trolley Coolant tank: 150 liters Weight approx.: 4,800 kg Machine dimensions LxWxH approx.: 2,950 x 1,840 x 2,150 mm 080525ä

Year of construction: 1990, Condition: excellent (used), machine/vehicle number: VH-7360, a used well-preserved CNC bed type milling machine with HEIDENHAIN control, HURON-head, hydraulic Werkzeugklemmumg,. Coolant system, central lubrication system, lighting, TFT - monitor new. Traverse path x/Y / Z 1600/ 800 / 650 mm Spindle retainer for SK 50 Spindelderhzahl 60-1800U/min Working feed 10-3000 mm / min Rapid traverse 10 m / min Table size 1800x610mm Fobodzy Uye Hacypogb Machine weight 9500 kg Table load: 3000 kg

Condition: ready for operation (used), Year of construction: 2010, FPT heavy-duty, high-dynamic mobile column boring machine with 5-axis support, model SPIRIT 240-M140. Working range: X-AXIS: 14,000 mm Y-AXIS: 5,000 mm Z-AXIS: 2,500 mm Equipped with 2 rotary tables with a capacity of 50 tons each. Automatic tool changer. Numerical Control: Siemens. Fgsb Hacswiifhoypjb The machine is equipped with 3 heads: 1 automatic bi-rotary thousandth TUPCG head, 1 automatic head for large removals TO144 1 D'Andrea head for turning with a working range from diam.150 to diam.1600 mod. U-TRONIC 800.

Condition: good (used), Year of construction: 2005, x-travel 6000 mm y-travel 3500 mm z-travel 1500 mm control SIEMENS 840D table load 12 t height over floor 6300 mm table dimension - longitudinal 5000 mm table dimension - cross 2500 mm no. of tables 2 tool change unit 200 -fach weight of tools max. 30 kg Fgob Hacyovwglvjpjb tool taper HSK A 100 diameter of tools max. 250 mm workpiece length 500 mm spindle turning speed range 5-6000 U/min c-axis -10 bis 370 ° b-axis 5 bis -95 ° column daylight 3000 mm distance spindle nose and table 1500 mm weight of the machine ca. 161 t dimensions of the machine ca. 20.5 x 11 x 6.3 m This WALDRICH-COBURG Valutec portal milling machine is in very, very good condition and can be beautiful condition and can be inspected by arrangement with the seller.

Condition: excellent (used), Year of construction: 1996, Universal milling and drilling machine Manufactured by KUNZMANN. WF 7/3 Year of manufacture: 1997 Technical specifications Make: Kunzmann Type: WF 7/3 Year of manufacture: 1997 X-axis: 600 mm Y-axis: 400 mm Z-axis: 400 mm Clamping surface: 800 x 425 mm Clamping slots: 6 Slot spacing: 63 mm Max. load: 250 kg Tool holder: SK 40 Quill stroke: 60 mm (vertical) Head can be swiveled 90° to both sides Drive power: 4 kW Dimensions: approx. L 2.0 x W 2.0 x H 2.0 m Weight: approx. 2.0 t (including control cabinet and swivel panel) Equipment - Heidenhain TNC 124 control - Operating instructions - Enclosure - Coolant system - Hydraulic tool clamping All information is subject to change without notice. A demonstration is available at any time in our showroom. Fobswhm Sio Hacypogb

Condition: used, Year of construction: 2001, x-travel 2708 mm y-travel 1250 mm z-travel 1513 mm table-size 3000 x 1000 mm taper ISO ISO 50 turning speeds 35-6000 U/min working speed 20000 mm/min rapid traverse 25000 mm/min Fob Hacsv Nbmfsypegb table load 10 t weight of the machine ca. 28 t

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Type: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Speed range: Spindle speeds continuously adjustable within 3 switching steps: 20 to 6,300 rpm Tool holder: SK40 Tool changer Horizontal and vertical tool holder: ISO 40 DIN 2079 Hydromechanical tool clamping, clamping force (vertical): 10,000 N Hydromechanical tool clamping, clamping force (horizontal): 12,000 N Spindle diameter at the front bearing, horizontal / vertical: 75 / 55 mm Quill stroke vertical: 75 mm Renishaw 3D probe Individual feed motors for each axis – three-phase current (brushless) Feed range in X, Y, Z manual / program-controlled: 1 to 2000 / 10,000 mm/min. Feed force in all axes (at 80% duty cycle): 6,000 N Febsv Rpr Se Hacypsgb Rapid traverse in all axes: 10 m/min. Angle table: 900 x 458 mm Universal clamping table, tilt range 15° from and 30° to the machine Tabletop swivel range +/- 25°: Ø 420 mm Tabletop swivel range +/- 30°: Ø 650 x 395 mm Table weight: 275 kg Maximum table load: 500 kg Number of T-slots: 7 T-slot spacing: 63 mm T-slot width: 14 H7 NC rotary table: Tabletop swivel range +/- 30°: Ø 500 mm Tabletop swivel range +/- 4°: Ø 650 mm Coolant tank: 170 liters Flow rate/pressure: 40 L/min. at 3 bar Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm Information: If you tilt the vertical milling head from its zero position to a +/- angle position, e.g., to produce inclined surfaces or holes, the working range of the Y-axis is reduced from 450 mm to 410 mm. 080525

Condition: used, A used well preserved universal drilling and milling machine Bohner and Koehle equipped with: - 3-axis digital display HEIDENHAIN - Swivel head 90° right/left - Large rotary table 800 x1200mm - central lubrication - documentation Table size 800x1200mm Table load 1000kg longitudinal movement X- axis 1000mm transversal movement Y- axis 800mm vertical movement Z- axis 800mm movement of rotary table 360 table feed longitudinal and transversal stepless 26 - 1100mm/min Rapid feed longitudinal and cross 1600mm/min feed vertical stepless 7 - 350mm/min rapid traverse vertical 500mm/min main drive: Milling spindle drive 2,5/ 3kW spindle admission SK40 12 speeds 45 - 2800rpm Dimensions and weight of the machine: Width 220cm depth 220cm height 250cm Feb Hspai Dhsacypegb Weight of the machine 3.300 kg Tech. Data and dimensions: Errors excepted

Condition: used, Year of construction: 1992, x-travel 710 mm y-travel 500 mm z-travel 460 mm Control TNC 407 Fgjbovfyais Hacypjb accessories and equipment: div. Zubehör und Werkzeug total power requirement 8 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 4*3*2,5 m Free for a short time from current business resolution ready for operation - see YouTube video ?v=0t82T4F6wVA Otherwise untested, wear and tear due to age and use Equipment: Fixed table 1000 x 500 mm, (12-fold tool changer), electronic handwheel, spray protection cabin, weight 3400 kg. Speed range 40-4000 /min.

Condition: excellent (used), Year of construction: 2018, operating hours: 6,373 h, Functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, LAGUN MM6 Traveling Column Milling Machine Current Specifications: - Status: Used Machine - Year of Manufacture: 2018 - Condition: Very Good - Machine Hours: 6,373 Hours (Program Run) Control: - Heidenhain iTNC 530 Linear Axis Travels: - X-Axis: 6,000 mm - Y-Axis: 1,300 mm - Z-Axis: 2,000 mm Machine Table/Plate Area: - Table Size: 7,000 mm x 2,000 mm - T-Slots: 8 x 28 mm - Slot Spacing: 250 mm Basic Technical Specifications: - Performance (S1/S6): 4,000/5,000 rpm and 1,068/1,316 Nm - X-Axis Drive: Rack and Pinion Master-slave drive Fgsb Hacowhfi Tsypeb - Feed rate X/Y/Z: 20,000 mm/min - Rapid traverse X/Y/Z: 20,000 mm/min Equipment: Milling head: - Automatic milling head with two swivel planes and 1° indexing Performance (S1/S6): 4,000/5,000 rpm and 1,068/1,316 Nm - Tool holder SK50 - DIN 69871A - BIG PLUS - Tool changer: 60 magazine positions Horizontal and vertical tool changing, max. tool length 500 mm, max. tool diameter 250 mm, max. tool weight 20 kg Compressed air, coolant, and chip management - 20 bar internal coolant high-pressure pump, controllable via potentiometer - Internal compressed air through the spindle - Automatic hinged chip conveyor Longitudinal direction - Additional automatic hinged-belt chip conveyor in the transverse direction Other features SIEMENS main spindle motor HEIDENHAIN axis servomotors HEIDENHAIN HR 510 handwheel HEIDENHAIN linear scales in all axes Sturdy machine structure made of cast iron GG30 55 mm linear guides 2-stage ZF gearbox Electronic heat compensation on the Y-axis Hydraulic counterbalance on the Z-axis Automatic central lubrication Coolant system Control cabinet cooling Work lamp Operating manual in German

Condition: used, Year of construction: 1986, Universal Milling Machine Manufacturer: IMATEC, Type: FU-145 Year of manufacture: approx. 1986 Technical Specifications Manufacturer: IMATEC Type: FU-145 Year of manufacture: approx. 1986 Conventional Control System Fgjb Hacswhm R Soypeb Travels X/Y/Z: 1000 / 300 / 500 mm Vertical Spindle Speeds: 38 - 1440 rpm Horizontal Spindle Speeds: 35 - 1500 rpm Spindle Mount: ISO 50 Milling Motor: 5.5 kW Connected Power: 7.0 kW Installation Dimensions: approx. L 2.0 x W 2.10 x H 2.2 m Weight: approx. 3.1 t Features • 3-axis digital display ELESTA • Table size: 1620 x 320 mm All information is subject to change without notice. A live demonstration is possible at any time in our exhibition hall.

Condition: new, APPLICATION AREAS: -jewelry industry -medical technology -precision mechanics -micromachining -mould and prototype construction -dental technology ADVANTAGES: -5-axis operation as standard -15-fold tool changer -low vibration -high accuracy through precision guides -large operating panel with 24" touch operation PREFERRED MATERIALS: -Titanium -Steel -CoCr -Aluminum / Light Metals OPTIONS: -Machine base -automatic placement system -various clamping devices -Liquid cooling for milling spindle -Laser or print options -3D measuring probes -Fields of application The iMG 1010 offers a compact solution for machining workpieces up to 100x100x100 mm. The machine enables a wide range of materials such as aluminum, CoCr or titanium to be machined precisely. The arrangement of the axes enables almost all positions on the workpiece to be reached without the need for reloading. The special mounting of the Y-axis is to be emphasized, which guarantees high stability as well as enormous vibration damping due to its installation position. The selection of workpiece clamping devices and holders in combination with the zero-point clamping system makes the machine a versatile machining center. The design allows wet/dry machining without time-consuming changeover. The basic design allows the machine to be extended by an optional handling system, which can enter the machine room from the right, left or from above. This allows workpieces to be changed automatically. The zero-point clamping system serves as an interface and ensures the exact and repeatable positioning of the workpiece. By means of software interfaces, the system can be integrated into network-controlled automated manufacturing processes. The maintenance-friendly design and the durable direct spindle drives save service costs and time and offer a reliable machining system. During development, care was taken to ensure that all elements are easily accessible and yet protected from external influences to guarantee a long service life. A wide range of optional extensions are available for the system. For example, a practical base frame is available for storing tools, material or the extraction system. Fgob Hehqhkijacypsb The machine can be used flexibly for a wide variety of materials. Metals and plastics can be processed wet and dry without changeover. The zero-point clamping system facilitates the handling of the workpieces. *This version is offered with aluminum base frame!

Condition: good (used), Year of construction: 1962, Spindle mounting, vertical + horizontal SK / ISO 40 Angular table clamping surface 700 x 285 mm X-axis travel 500 mm Y-axis 200 + approx. 250 mm Fgsbsm Uygvo Hacypeb Z-axis 400 mm Quill stroke approx. 80 mm 18 main spindle speeds 40 - 2000 rpm 18 feed speeds 8 - 400 mm/min rapid traverse 1200 mm/min drive power 2,2 kW dimensions L x W x H 1150 x 1050 x 1650 mm Machine weight 1000 kg Accessories / special features: - Vertical milling head, swiveling R/L - Fixed angle clamping table - Feed + rapid traverse in all axes Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2009, x-travel 1500 mm y-travel 500 (+600) mm z-travel 450 mm table-size 1800 x 500 mm max. workpiece weight 2000 kg Number of working hours 16750 h tool taper DIN 2080 ISO 40 spindle turning speed - stepless Vertikal 60-3600 U/min spindle turning speed - stepless Horiz. 30-1800 U/min swivability of the head left/right +/- 90° Control Heidenhain TNC 320 feeds x/y/z -stepless 10-4000 mm/min rapid travel x/y/z 15000 mm/min feed power x + y = 10000 N spindle motor Vertikal 9/11 kW spindle motor Horiz. 11/13,5 kW distance vertical spindle / table 100 - 550 mm distance horizontal spindle / table 0 - 450 mm upper slide-adjustment 150 - 600 mm weight of the machine ca. 5,6 t dimensions of the machine ca. 4,9 x 3,1 x 2,6 m Solid bed-type milling machine with vertical and horizontal spindles and individual motors, Heidenhain TNC 320 contouring control, ISO 40 DOUBLE SWIVEL HEAD with manual quill stroke PIC 6, upper arm manually adjustable in the y- direction up to 600 mm in addition to the y-adjustment of the table increased speeds up to 3600 rpm,4th-axis dividing head make Walter, model TANIH 160NEG with 55 mm bore, chip conveyor, full cabinet, electric handwheel, and various accessories. Machine in good condition from custom parts production with few operating hours, for sale due to a production change. Fully functional machine still in use in sellers factory. Fgjbev U Dh Ns Hacypeb Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 2004, gebraucht 2004 4540 prompt, Zwischenverkauf v Österreich 23700 € 1 19900 € 63 - 3150 (18) U/min 700 x 500 x 500 mm 900 x 500 mm 6.6 kW 2150 mm 2220 mm 2120 mm 2550 kg 500 kg 100 mm CNCHeidenhain TNC 410 18. mech. feeds with rapid travel in X,Y,Z axes ball screw spindles toolmaker accuracyDIN 8615 hyd. tool clamping with holdersSK40 vertical und horizontal vertical spindle+/- 30° swiveling swing out device digital 3D edge finder work area protection coolant equiptment Fobewirmnj Hacypjgb aut. central lubrication fixed angle table with 10 t-slots chip collecting tray machine lamp users manual in GERMAN + CE COMPLIES WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO & UVV)

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, Used CNC traveling column milling machine Make: ANAYAK Type: HVM 6000 Year of manufacture: 1997 Control: CNC TNC426 Febowg Aate Hacypsgb Travel: X=5300 / Y=1200 / Z=2000 Tool magazine: 60 pcs Automatic head: B & C 2.5 indexed Table: 6000 x 1000 mm Speed: 3000 rpm

Condition: ready for operation (used), total height: 3,900 mm, total length: 8,000 mm, controller manufacturer: Heidenhain, net weight: 13,000 kg, total depth: 2,900 mm, Type: TMML6-centrum Maximale afstand van kolom tot midden van spindel: 1210 mm (diepte van de kiel) Gereedschapswisselaar met 30 posities Spaantransportband Kan achteraf worden uitgerust met nieuwe Heidenhain-besturing Originele tafel kan opnieuw worden gebruikt of een T-gleuf vloerplaat om hogere werkstukken te kunnen bewerken Longitudinal travel X-axe: 3023 mm Crosstravel Y -axe: 800 mm Travel Z-axe (Height): 1528 mm Fob Hacsv St Efjypegb Dimensions clamping space - table: 4200 x 1000 mm Max Height of workpiece: 2000 mm Power on spindle: 20 kW Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 50 > 1980 rpm

Condition: excellent (used), Year of construction: 2008, Digital display Travel paths x/y/z 450/350/400 Tool holder: SK 40 Swivelling vertical milling head Speed 5000 rpm All axes with linear guides Ball screws in all axes Coolant system Accessories Fsb Hacswhrf Ujypjgb

Condition: good (used), DECKEL High-Speed Milling Head No. 2021-2230 / FP 4 - 0199 This high-speed milling head is suitable for a DECKEL FP 1 / 2 / 3 / 4. When used on an FP 1, an intermediate plate is required. Spindle mount SK 40 Spindle speed range 40 - 2000 + 125 - 6300 rpm. Fgsb Hacjwg Rybsypjb Quill adjustment Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 1998, Control: Fidia CXR with handwheel (new in 2017!) Working areas X-axis: approx. 5,000 mm Y-axis: approx. 2,500 mm Z-axis: approx. 1,250 mm Clamping table Length x width x height: approx. 5,600 x 2,740 x 520 mm (cast iron) Table load: max. 15,000 kg T-slots and spacing: 10 x 22H8 / 255 mm Milling spindle (new!) Type: HSD ES951 Adapter: HSK63F Cooling: Air Clamping: Pneumatic Maximum speed: 24,000 rpm Power: 10 kW Torque: 8.7 (S1) and 10.5 (S6) Suitable materials: Wood, plastic Aluminum Linear axis drives X, Y, and Z axis feed rate: up to 20 m/min X, Y, and Z axis acceleration: up to 1.5 m/s2 Connection data Connected load: approx. 28 kW Back-up fuse: 63 A Dimensions, weight Machine space requirements: approx. 8,000 x 5,000 x 4,500 mm Total weight: 25,000 kg Fgob Hacjh Dyvgoypob Machine condition Fully functional, regularly maintained by the machine manufacturer. Machine is no longer powered and no longer has a housing! Available immediately!

Condition: used, Year of construction: 2023, gebraucht 2023 4546 prompt, Zwischenverkauf v Taiwan 32800 € 1 65 - 2600 U/min ISO 40 420 x 220 x 380 mm 840 x 390 mm 2.2 kW 1600 mm 1700 mm 2000 mm 1145 kg 840 x 390 mm 1000 mm/min 5 14 x 63 mm 200 kg 420 mm 220 mm 380 mm 0 - 600 mm/min. 0 - 600 mm/min. 65 - 2600 90 - 310 mm 65 - 2600 +/- 90° ° 100 mm manuell 2,2 kW 950 x 250 mm 90 - 310 mm 100 - 480 mm demo machine / mint condition net price (price for new machine € 39.600,00) swiveling operating panel 3 axes digital read out Fagor 40i Innova motor for horizontal- and vertical spindle: 2,2 kW feed motors with inverter for X/Y/Z: 0,35 / 0,35 / 0,75 kW ball screw spindles for X/Y/Z axes manual gear box for spindle speeds Fgjbjwirdgj Hacypsb 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle protection with switch table safety guard with doors with switches outer arbor support for horizontal spindle LED work lamp automatic lubrication for X/X/Z guidways safety hand wheels for X/Y/Z axes coolant equipment with chip tray covers for X/Z axes level pads and bolts tool box with tools operating manual in English or German according to CE rules

Year of construction: 1969, Condition: good (used), Univ. tool milling machine DECKEL type FP 1 Machine No. 37101 Year of construction approx. 1969 travel X: 300 mm Y: 150 mm Z: 340 mm table size 600 x 200 mm spindle mounting MK 4 - S20 x 2 Feb Hacol Dx I Sjypsgb spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 1,0 and 1,5 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis - Coolant device with mechanical pump in machine base - pinol shift at vertical milling head 60 mm - adjacent control cabinet space requirement L x W x H 1000 x 900 x 1750 mm weight 690 kg good condition accessories: - collets - rotary table - vice - Counterholder H. Milling