Year of construction: 1999, Condition: ready for operation (used), The buffer battery must be replaced. Machine dimensions X/Y/Z: approx. 5500mm/2700mm/3100mm, control: Heidenhain. Fgob Hsub Tpqocplasb

Year of construction: 2002, Condition: good (used), Hinge width 300 mm Fgob Homdqx Hscplaob Slide-in width - / height 390 x 100 mm Insertion length 4615 mm Height from floor to lower edge of chip ejector 700 mm Hinge drive 0.37 kW Transport dimensions L x W x H approx. 5965 x 750 x 1010 mm (height without feet!) Weight approx. 500 kg Foot height adjustable yes This hinged chip conveyor manufacturer TEKNICALDE model TC 1 ½ 300 was used on a CNC bed milling machine MTE Kompakt. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Functionality: fully functional, Machine weight: 1725 kg Total machine power: 3 kW Table clamping surface: 800x400 mm Longitudinal table movement - x-axis: 600 mm Transverse table movement - z-axis: 400 mm Vertical table movement - y-axis: 400 mm Spindle taper: ISO 40 Spindle speed: 40-2000 rpm Fsbevzkzcs Hcplajgb Working longitudinal feed - x-axis: 8-400 mm/min Working transverse feed - z-axis: 8-400 mm/min Working vertical feed - y-axis: 8-400 mm/min Rapid feed x/z/y: 2000/2000/1000 mm/min Max. workpiece weight: 400 kg

Condition: used, Year of construction: 1985, machine/vehicle number: 294, x-travel:400 mm y-travel:190 mm z-travel:310 mm table clamping surface:280 x 750 mm Reach of the vertical spindle:115-575 mm feed steps:16 feed range:11,2-355 mm/min tool taper:SK 40 speed steps :16 Febjvcf Hpo Hcplaegb speeds::56-1800 min-1 total power requirement:2,2 kW dimensions of the machine ca.:1550 x 1250 x 2000 mm weight of the machine ca.:1200 kg

Condition: used, clamping claws, clamping devices, clamping irons, clamping devices, clamps, clamping tools, step clamps, low clamps, clamping irons, power clamps, compact clamps, machine table clamps Feb Hcou Tyuqeplasgb -Manufacturer: Bessey, clamping claws, machine table clamps, pivoting -Type: BS-5 -Wingspan: 260 mm -Number: 3x tensioners available -Price: per piece -Dimensions: 300/80/H370 mm -Weight: 3.0 kg/piece

Year of construction: 1986, Condition: ready for operation (used), Travel: 1000mm/560mm/1100mm, tool holder: ISO 50, quill stroke: 125mm, speed: 2000rpm, feed: 3000mm/min, rapid traverse: 6m/min, max. workpiece weight: 800kg. Machine dimensions X/Y/Z: approx. 1020mm/1700mm/2650mm, weight: approx. 7100kg, CNC 432 control, operating hours: 70771h. Documentation available. Fjbot Tfagj Hcplaogb

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 360 x 660 mm -T grooves: 8x 12 mm -rotatable: by hand with 4x fastening screws -swivelling: via crank -Movable: via crank 200 mm Feb Hcpeb A H Rbelasgb -Number: 1 piece available

Year of construction: 1999, Condition: ready for operation (used), Travel X/Y/Z: 600mm/500mm/450mm, speed: 5000rpm, table dimensions X/Y: 900mm/520mm, quill stroke: 80mm, tool holder: SK40, tool positions: 20, power: 7.5kW, number of axes: 4, machine weight: approx. 4100kg, control: Dialog 12, documentation available. On-site inspection is possible. Fgsb Hcsuzlfmsplasb

Year of construction: 1982, Condition: ready for operation (used), Two Steinel BZ20 milling machines are available. Travel X/Y/Z: 560mm/450mm/450mm, speed: 7000rpm, feed: 10000mm/min, tool holder: ISO30, tool positions: 40, rotary table diameter: 270mm, rotary table swivel range: 0°-24°, max. workpiece weight: 6kg. Control: Siemens System 8, weight: approx. 12000kg. Spare parts carrier. Fjb Hetyax Sscplajgb

Condition: ready for operation (used), A 5-axis CNC tool milling machine DMG Mori is available. Travel X/Y/Z: 2200mm/560mm/720mm, B-axis: +/-100°, speed: 1800rpm, tool holder: SK40, power at 40%: 35kW, rapid traverse X/Y/Z: 100m/min / 50m/min / 50m/min, feed: 50m/min, table dimensions X/Y: 2600mm/600mm, max. table load: 2200kg, control: Siemens 840D powerline with le load: 2200kg, control: Siemens 840D powerline with ShopMill. The motor spindle, the Y-axis linear guide and the storage bladder of the machine were replaced in 06/2024. Fgjb Hcpsu Rp Haslajb

Year of construction: 2008, Condition: ready for operation (used), Horizontal spindle diameter: 100mm, Horizontal spindle speed: 3600rpm, Horizontal spindle power: 25kW, Horizontal spindle torque: 920Nm, Vertical milling spindle swivel range: +/-90°, Vertical spindle diameter: 90mm, Vertical spindle speed: 3600rpm, Vertical spindle power: 25kW, Vertical spindle torque: 920Nm. Travel X/Y/Z: 1500mm/500mm/450mm, feed X/Y/Z: 4000mm/min, feed force X/Y/Z: 12kN/12kN/15kN, rapid traverse X/Y/Z: 15m/10m/10m/min. Table dimensions X/Y: 1800mm/500mm, number of T-slots: 5, center slots: 18H7, clamping slots: 18H9, center-to-center distance: 100mm, table load capacity: 2000kg. Horizontal spindle table distance: 450mm, horizontal spindle counter-holder lower edge distance: 345mm, vertical spindle lower edge table distance: 350mm-800mm, column brush vertical spindle center distance: 100mm-600mm. Machine dimensions X/Y/Z: approx. 3400mm/2900mm/2600mm, weight: approx. 5600kg, control system: Heidenhain, operating hours: 61440h. On-site inspection is possible. Fgsb Hcjulku Hsplajb

Condition: ready for operation (used), An NC bed milling machine DPM (Digital Precision Machine) with defective control is available. Travel X/Y/Z: approx. 800mm/430mm/600mm, table dimensions X/Y: 1270mm/255mm, spindle mount: R8/CAT40, speed: 5000rpm, spindle power: 2.2kW, max. table load: 340kg, rapid traverse: 2.54m/min. Dimensions X/Y/Z: approx. 2000mm/2600mm/2300mm, weight: approx. 2500kg. On-site inspection is possible. Fgsb Hsuhqb Recplaeb

Year of construction: 1999, Condition: ready for operation (used), Travel X/Y/Z: 500mm/400mm/400mm, speed: 9000rpm, spindle power: 9kW/13kW, tool holder: SK40, feed X/Y/Z: 10m/min, rapid traverse X/Y/Z: 12m/min. Table dimensions X/Y: 700mm/500mm, max. table load: 200kg, number of T-slots: 7, T-slot spacing: 63mm. Tool positions: 16, max. tool length: 290mm, max. tool weight: 6kg. Machine dimensions X/Y/Z: approx. 4000mm/2200mm/2500mm, weight: approx. 3500kg, control: MillPlus. Documentation available. On-site inspection is possible. Feb Hcju T Riljplaogb

Year of construction: 1991, Condition: repair required (used), A defective CNC universal tool milling and drilling machine Klopp-Korradi is available. Travel X/Y/Z: 1000mm/600mm/500mm, quill stroke: 63mm, spindle center-to-clamping surface distance min./max.: 60mm/560mm, max. workpiece weight: 630kg. Table dimensions X/Y: 1300mm/700mm, groove width: 18mm, groove distance: 90mm, tool holder: SK40, spindle diameter: 60mm, max. spindle torque: 630Nm, speed: 4000rpm. Control system: Heidenhain TNC 360, power supply unit is defective. Documentation available. On-site inspection is possible. Fsbot Siazs Hcplasgb

Year of construction: 2005, Condition: ready for operation (used), Travel X/Y/Z: 700mm/500mm/500mm, feed X/Y/Z: 5000mm/5000mm/2500mm/min, feed force X/Y/Z: 20kN/20kN/30kN. Spindle power: 7kW, speed: 3150rpm, spindle torque: 250Nm, spindle mount: ISO40. Vertical table: dimensions X/Z: 500mm/320mm, flute width: 14H8, axis distance: 50mm, number of flutes: 5. Angled table: Dimensions X/Y: 900mm/500mm, flute width: 14H8, axis distance: 50mm, number of slots: 10, machine dimensions X/Y/Z: approx. 1820mm/2050mm/2175mm, weight: approx. 2500kg, control: Heidenhain TNC 310, probe included. Documentation available. On-site inspection is possible. Feb Heulzlijcplajgb

Condition: ready for operation (used), Speed: 5000 rpm, machine dimensions X/Y/Z: approx. 3220mm/2120mm/2120mm, weight: approx. 3600kg, control: Maho CNC 432, operating hours: 33494h. Documentation available. On-site inspection is possible. Fob Heunk N Aocplaegb

Condition: ready for operation (used), Travel X/Y/Z: 1200mm/600mm/500mm, table dimensions X/Y: 1500mm/675mm, speed: 6300rpm, tool holder: SK40, feed: 5000mm/min, spindle power: 7.5kW, machine dimensions X/Y/Z: approx. 2400mm/2500mm/2500mm, weight: approx. 6000kg. On-site inspection is possible. Fgjbeu H H H Ao Hcplasb

Year of construction: 1989, Condition: ready for operation (used), Travel X/Y/Z: 500mm/400mm/350mm, rapid traverse: 4m/min, spindle speed: 5000rpm, spindle mount: SK40, max. table load: 200kg, table dimensions X/Y: 800mm/360mm. Machine dimensions X/Y/Z: approx. 2200mm/2200mm/1900mm, weight: approx. 2000kg, control: CNC 452, operating hours: 8660h. On-site inspection is possible. The function of the machine is limited, as the buffer battery on the control unit is probably empty. Fgsb Hcsuxdirsplaeb

Condition: ready for operation (used), X-axis: 500mm, Y-axis: 150mm, Z-axis: 280mm, quill stroke: 55mm, throat depth: 185mm, table dimensions: 700x180mm, groove width: 12mm, weight: approx. 110kg, with base frame. Fgjb Hsumwh Ajcplaeb

Year of construction: 1991, Condition: ready for operation (used), X-travel: 600mm, y-travel: 400mm, z-travel: 350mm, clamping surface dimensions: 400x800mm, width T-slots: 14mm, max. workpiece weight: 300kg, connected load: 14kW, control: Heidenhain, length: 1700mm, width: 1700mm, height: 2000mm, weight: 2t, with documentation, an on-site inspection is possible. Fob Hcpsrm S Eislasgb

Year of construction: 1984, Condition: ready for operation (used), Table dimensions X/Y: 830mm/700mm, spindle diameter: 30mm, vertical stroke: 150mm, speed: 10000rpm, spindle swivel: -10°/+45°, motor power: 2.2kW, weight: approx. 240kg. On-site inspection is possible. Fjb Hcpovbig Delajgb

Year of construction: 2019, Condition: ready for operation (used), A Deckel FP2 universal tool milling machine completely overhauled in 2019 is available. Travel X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, speed: 2000rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. On-site inspection is possible. Fgob Hcjvf Iy Deplajb

Condition: ready for operation (used), Travel X/Y/Z: 500mm/400mm/400mm, table dimensions X/Y: 800mm/460mm, spindle mount: SK40, speed: 2500rpm, feed: 630mm/min, rapid traverse: 1.3m/min, machine dimensions X/Y/Z: approx. 2300mm/1800mm/1800mm, weight: approx. 1750kg. Including numerous accessories such as new Allmatic HD 100 vice, 16x clamping tools, 3-jaw chuck, edge finder etc. Documentation available. On-site inspection is possible. Fgob Hcplsvhc R Ajaob

Year of construction: 1976, Condition: ready for operation (used), Travel X/Y/Z: 820mm/300mm/485mm, table dimensions X/Y: 250mm/1000mm, spindle mount: SK40, speed: 2800rpm, spindle head swivel: +/-45°, quill stroke: 100mm, feed: 630mm/min, connected load: 9.5kW, machine weight: approx. 1600kg. Documentation available. On-site inspection is possible. Feb Hcpljvur Hmsaegb

Condition: ready for operation (used), Travel X/Y/Z: 850mm/280mm/355mm, table dimensions X/Y: 1250mm/315mm, feed X/Y: 800mm/min, feed Z: 250mm/min, spindle mount: ISO 50, spindle speed: 1400rpm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2400mm, weight: approx. 3300kg. On-site inspection is possible. Fobovu Dfne Hcplaegb