Condition: good (used), Year of construction: 1995, Table 4500 x 920 mm max. table weight: 10000 kg X travel: 4000 mm Y travel: 1000 mm stroke Z (vertical): 1500 mm spindle cone ISO 50 CN Heidenhain 426 2.5° x 2.5° self-tilting head Working feedrate: 0-4000 Rapid feed: 12000 Machine weight: 23800 kg Fjlqovffz Es Acbxogb

Condition: used, branded milling machine, Stanko type 6175 Travel X/Y/Z: 320/210/300 mm Spindle speed: 50 - 2040 rpm Felqetrl D Sj Acbxogb Feed speed: 13 - 395 mm / min Drive power: 1.5 kW Tool holder: 4 MK Groove width: 14 mm Number of grooves: 3 pieces Groove spacing: 50 mm

Condition: good (used), Year of construction: 2005, travel distance X-axis: 3,000 mm, travel distance Y-axis: 30,000 mm, travel distance Z-axis: 1,000 mm, Unisign Uniport 6000 portal milling machine, Year of manufacture 2005, Fgslq Ajvwmliscbxjb Control Siemens 840 D, Travel X/Y/Z 3000/3000/1000 mm, C axis for turning, Table Ø 2500 x 2000 mm, Max turning Ø 3000 x 2500 mm, Max. turning height 1000 mm, Angle head for lateral machining, 2.5° Hirth toothing, Spindle speed up to 6,000 rpm, Spindle power 36 KW, Holder HSK 100, 30-way tool changer, 3D measuring probe, Chip conveyor, Faceplate Ø 2000 mm, Max. load faceplate 10,000 kg, Machine weight 45,000 kg,

Condition: used, Year of construction: 1990, Weight . kg Fjlq Acjud Tr Rebxegb Year . content Rubintastkopf cbm

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Fgolqjquhbgj Acbxob Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: ready for operation (used), Year of construction: 2000, operating hours: 25,324 h, Functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 16,000 rpm, table load: 3,000 kg, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 90 °, swivel angle C-axis (max.): 360 °, HIGHLIGHTS - IKZ (internal cooling) - Milling spindle overhaul: motor winding, bearings, tool clamp (2022) - Chip conveyor AXA FSB400 (built in 2021) - Compressed air preparation renewed (2023) TECHNICAL DETAILS Control: HEIDENHAIN TNC 426/430 X-travel: 1,200 mm Y-travel: 850 mm Z-travel: 800 mm B-axis: ± 95° Foljvxhrmoq Acbxegb C-axis: 0.0001° Spindle speed: 0 - 16,000 rpm Drive power: 26 kW NC swivel rotary table: Ø 520 mm Table load: 3,000 kg Table clamping area: 2,300 x 980 mm Tool holder: HSK 63 Tool magazine: 20 slots Feed rate infinitely variable: 0 - 20,000 mm/min MACHINE DETAILS Total power requirement: 36 kW Machine weight: approx. 17 t Space requirement: approx. 5.4 x 4.4 x 3.1 m Operating hours: 33,325 h Program run: 10,355 h Machine running time: 25,324 h

Condition: good (used), Year of construction: 1995, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 6,300 rpm, spindle speed (min.): 20 rpm, We are selling our Hermle UWF 902 H due to a new purchase. The machine is still in operation and can be tested on site by arrangement. Fgjlq Acsvu Slvobxeb TECHNICAL DATA: - Year of manufacture 1995 - X 600 mm - Y 450 mm - Z 500 mm - HEIDENHAIN TNC 426 PA - Tool holder SK 40 - Spindle speed 20 to 6300 rpm - Vertical and horizontal machining - Tool changer can change vertically and horizontally - Tool positions 34 - Additional B-axis (diameter 500mm) - Control on 2,214h (overhauled in 2021) - Machine on 59,047h - Program run 23,027h The price stated is net (plus VAT)

Condition: used, Year of construction: 2004, x-travel 3.600 mm y-travel 920 mm z-travel 820 mm Control 840D pl ShopMill Siemens Main spindle: turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 130 Nm tool taper HSK-A63 swivellable B: +/- 100 ° work table: table surface area 4.200 x 900 mm max. table load 4.200 kg T-slots 9x 18H7 x 100 Tool-Presetter: number of toolpositions 130 ( 120 +10 ) pos. tool taper HSK-A63 max. tool diameter 50 mm max. tool weight 6,0 kg max. tool length 200 mm feeds: rapid traverse ( X / Y / Z ) 100 / 50 / 50 m/min feed speeds max. 20.000 mm/min total power requirement 92 kVA weight of the machine ca. 17,0 t Felqjuntmqo Acbxegb dimensions of the machine ca. 11,0 x 5,5 x 3,0 m CNC - Travel Column Milling Machine DECKEL MAHO - DMF 360 linear - 5 Axis ( NC-Swivel-Milling-Head & TurnTable LEHMANN - EA 430.2A ) - moveable tailstock - separated WorkingTable - internal Coolant-System - 120-pos. Tool-Magazine incl. cleaning-unit - 10 additional pos. for oversized tools - Machine equipped with increased accuracy

Condition: new, Year of construction: 2025, Functionality: fully functional, feed length X-axis: 300 mm, feed length Y-axis: 200 mm, feed length Z-axis: 350 mm, spindle speed (max.): 2,200 rpm, spindle speed (min.): 80 rpm, total height: 1,550 mm, total width: 1,410 mm, total length: 11,150 mm, overall weight: 500 kg, The EMCOMAT FB-3 L is ideal for use in tool and mould making, in apparatus and prototype construction and in small series production. It has also proven itself many times in schools and training workshops. As the smallest machine in the EMCO milling machine range, the FB-3 L already meets the highest demands for accuracy and flexibility - and that at an unbeatable price-performance ratio. Travel in X/Y/Z 300 / 200 / 350 mm Distance spindle nose table 80 - 430 mm Clamping surface 600 x 200 mm (rigid angle table) Fgeledtm Ahsq Acbxeb Max. table load table load 50 kg (rigid angle table) Speed range 80 - 2200 rpm Power 1,4 kW Tool holder SK30 DIN2080

Year of construction: 1988, Condition: used, Control Grundig x-travel 700 mm y-travel 500 mm z-travel 400 mm weight of the machine ca. 2,8 t Felq Asiqu S Eocbxjgb documentation available

Condition: used, High-speed milling spindle HENNINGER type 814 / 5131 / 1:5 / 15000 Speed max. 15000 rpm at 70% ED Gear ratio 1:5 Power transmission up to approx. 2.5 kW Front dimension 110 mm (machine spindle to clamping nut) Tool holder MK4 with M16 tightening thread Folqof Axn Uj Acbxjgb Collets type OZ16 Ø 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mm dead weight 6.5 kg good condition

Condition: used, machine/vehicle number: 1485, x-travel:300 mm y-travel:110 mm z-travel:220 mm number of T-slots:3 Fgjlstzf Srsq Acbxjb T-slot - size:12 mm T-slot - distance:37,5 mm table clamping area :600 x 115 mm Work spindle to clamping surface:225 mm Center of work spindle to lower edge of counterholder:93 mm Distance from the stand sliding surface to the counter support:250 mm Distance from the work spindle head to the guide bushing:200 mm Distance from the work spindle head to the rear edge of the table:80 mm spindle head:M3 diameter of main spindle in front bearing:32 mm total power requirement:1,5 kW weight of the machine ca.:500 kg

Condition: good (used), Year of construction: 2004, travel distance X-axis: 8,250 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 5,000 rpm, spindle motor power: 37 W, X-AXIS STROKE 8250 MM Y-AXIS STROKE 2000 MM Z-AXIS STROKE 1250 MM SPINDLE NOSE ATTACHMENT ISO 50 RAPID FEED X-Y-Z AXIS FROM 15000 TO 25000 MM/MIN SPINDLE MOTOR POWER 37 KW MAX SPINDLE SPEED 5000 RPM 10000 X 1100 MM BENCH CNC HEIDENHAIN iTNC 530 TOOL CHANGER 60 PLACES AUTOMATIC BI-ROTATIC HEAD 1 ° X 2.5 ° Fgelq Ajvza Ifscbxeb INTERNAL COOLING AT 15 BAR 3D THERMAL EXPANSION COMPENSATION ELECTRONIC HANDWHEEL NR 02 CHIP CONVOYERS

Condition: used, Year of construction: 1990, x-travel 600 mm y-travel 400 mm z-travel 420 mm control TNC 355 Heidenhain Main spindle: turning speed range - main spindle 20 - 4.000 min/-1 power capacity - main spindel 7 kW transmission ratio 3 tool taper SK 40 distance spindle /table 127 - 567 mm spindle diameter in front bearing 55 mm stroke of quill vertical 75 mm tool clamping 10 kN swivellable +/- 90 ° work table: table surface area 900 x 458 mm T-slots 7x 63 x 14H7 feeds: feed range 1 - 5.000 mm/min Feed force 5,4 kN rapid traverse ( X / Y / Z ) 7 / 7 / 6 m/min total power requirement 13 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 4,0 x 4,0 x 2,1 m Tool Room Milling Machine - Universal HERMLE - UWF 900 E Fgelqotqmm As Acbxob - Spindle-Head swivable +/- 90°

Condition: new, Year of construction: 2025, Functionality: fully functional, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 10 rpm, total height: 1,990 mm, total length: 2,100 mm, table width: 2,190 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, overall weight: 2,370 kg, workpiece weight (max.): 300 kg, Equipment: rotational speed infinitely variable, Universal milling and drilling machine with Heidenhain TNC 620 contouring control as manual machine operable via handwheels. Control can be locked via key switch and hydraulic tool clamping. Arbeitsbereich X600/Y400/Z400mm 7/10kW drive power speed from 10-5000 rpm feed rate from 10-2000 mm/min rapid traverse up to 5000 mm/min Toolmaker accuracy DIN8615 Folq Aoibarqocbxogb tool holder DIN 69871 SK40 Includes:Linear guides Ball screws Vertical milling head +/-90° swiveling with 80mm quill stroke Swing out device for vertical head Hydraulic tool clamping Coolant device LED machine lamp Rigid angular table 800x400mm Chip tray Automatic central lubrication Operating tool Documentation Heidenhain TNC 620 contouring control with 19" multi-touch screen incl. drive package in 3 axes with ball screws and servo motors, Fixed cycles with graphic support: Drilling cycles for drilling, deep drilling, reaming, tapping (with length compensation) on hole circle and hole lines, rectangular and circular pocket, slot milling cycle, cycles for line-off, etc., USB interface, PC keyboard

Condition: used, 3 Stück Dimensions (L/W/H) siehe Bilder mm Fjlqsupmwle Acbxegb weight of the machine ca. . t

Condition: used, Univ. NC tool milling machine KUNZMANN type WF 3/4 Machine. No. 341020 Year of construction 1998 Travel X: 400 mm Y: 320 mm Z: 400 mm Table size 650 x 350 mm Spindle holder SK 40 Spindle speed 40 - 2500 rpm. Feed rates X, Y and Z-axis 0 - 1000 mm/min. infinitely variable Rapid traverse X, Y-axis 4000 mm/min. Rapid traverse Z-axis 3000 mm/min. Vertical pinol adjustment 60 mm Drive power spindle motor 3 KW Mains connection 400 Volt, 50 Hz - CNC line control Heidenhain TNC 124 - Spindle speed via 2 gear stages and infinitely variable via electronically controlled variator gearbox - Vertical milling head can be tilted +/- 90 - Hydraulic tool clamping - Fixed angled table - Control cabinet fixed to the machine - Coolant tank with pump adjacent - central lubrication - central lighting Space requirement L x W x H 1800 x 1800 x 1900 mm Weight 1300 kg Fgslq Acjlvyrbobxsb Good condition

Condition: used, x-travel:305 mm y-travel:110 mm z-travel:287 mm table-size:650 x 190 mm spindle taper:MK 3 Fgjlq Acbsqxd N Roxeb spindle turning speed range:100-1300 U/min weight of the machine ca.:1000 kg

Year of construction: 1996, Condition: used, Notch width: max. 200 mm Notch depth: 40 mm Profile height: max. 100 mm Vise span: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by operating the foot switch Profile clamping using a continuously pivoting vice. Fgjlqoq Awg Ee Acbxsb

Condition: used, x-travel 600 mm y-travel 500 mm z-travel 450 mm control TNC 415 Heidenhain Main spindle: turning speed range - milling 20 - 5.000 U/min power capacity - milling spindle 6 / 9 kW tool taper SK 40 quill stroke 90 mm transmission ratio 4 swivellable +/-90 ° work table: table-size 900 x 530 mm T-slots 7 T-slot - distance 63 mm T-slot - width 14-H7 mm max. table load 400 kg Tool-Presetter: number of toolpositions 18 pos. tool taper SK 40 max. tool diameter 85 mm Fgelqou N Iuyj Acbxob max. tool-dia with free toolbox 150 mm max. tool length 300 mm max. tool weight 10 kg tool changing time max. 15 sec feeds: feeds - fine adjustment 2 ~ 4000 mm/min rapid traverse X-axis 6.000 mm/min rapid traverse Y-axis 6.000 mm/min rapid traverse Z-axis 5.000 mm/min total power requirement 15 kW weight of the machine ca. 3,6 t dimensions of the machine ca. 3,4 x 3,6 x 2,2 m Tool Room Milling Machine - Universal MIKRON WF 32C

Condition: used, TECHNICAL DETAILS Felovxw Azoq Acbxjgb - spindle speed:50 - 7 100 [rpm] - 6 spindle feeds:0.03 - 0.4 [mm/r] - spindle stroke:210 [mm] - X axis machining range:850 / 1 000 [mm] - Y axis machining range:465 [mm] - Z axis machining range:750 [mm] - tightening dimension on table:1 570 x 500 [mm] - T slots:7 - distance between the slots:50 [mm] - width slots:12H8 - positioning accuracy:0.01 [mm] - repetition accuracy:0.005 [mm] - parts maxi weight:250 [kg] - driving power:5 [kW] - drilling capacity in steel:30 [mm] - tapping capacity in steel:M 20 - tapping capacity in cast-iron:M 24 EQUIPMENT - CNC HEIDENHAIN TNC 151 control

Year of construction: 1989, Condition: used, x-travel 500 mm y-travel 360 mm Fjlqjh Hrvfo Acbxsgb z-travel 420 mm control Heidenhain 355 handwheel tool taper SK 40 weight of the machine ca. 1,7 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, position of the milling head: SK40, input voltage: 400 V, Deckel FP1 2 axis Active Displacements: Fgjljvuzg Aeq Acbxeb X = 300 mm Y = 160 mm Z = 340 mm Speed 40-2000 Rpm Automatic feed and rapid traverse on the X, Y and Z axes. Continuously adjustable. Table dimensions 600 x 260 mm 2 axes Active control, point-to-point control. 3 axis digital readout from Heidehain. Spindle mounting SK40 Deckel mounting (outside thread)

Condition: used, Travel path of the axles: X: 300mm Fjlq Acboq Awhfexegb Y: 350mm Z: 200mm Weight: approx. 800 kg

Condition: used, Year of construction: 1980, x-travel 500 mm y-travel 400 mm Fslq Acboud Tgbjxegb z-travel 400 mm control TNC 135 Heidenhain table surface area H: 725 x 410 mm T-slots 8 T-slot - distance 45 mm table surface area V: 1.030 x 245 mm T-slots 6 T-slot - distance 45 mm turning speed range - milling 50 ~ 2.500 U/min tool taper SK 40 quill stroke 80 mm rapid traverse X-axis 1,2 m/min rapid traverse Z-axis 1,2 m/min rapid traverse Y-axis 0,8 m/min weight of the machine ca. 1,9 t dimensions of the machine ca. 2,2 x 2,5 x 2,0 m Tool Milling Machine - Universal MAHO - MH 600 P