Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, feed length Y-axis: 200 mm, feed length Z-axis: 335 mm, travel distance X-axis: 400 mm, spindle speed (max.): 1,890 rpm, TECHNICAL DETAILS Drilling and milling head Milling head swivel range: ± 90° Drilling and milling capacity Cutter head size max.: 100 mm Drilling capacity steel (S235JR): 30 mm Continuous drilling capacity steel (S235JR): 26 mm Shank cutter size max.: 25 mm Fgobvl Nusu Nh Dno Sjb Electrical data Drive motor power: 2.2 kW Supply voltage: 400 V Mains frequency: 50 Hz Horizontal milling table Length: 750 mm Width: 320 mm Distance vertical spindle - horizontal milling table min.: 75 mm Distance vertical spindle - horizontal milling table max.: 410 mm T-slot size: 14 mm Number of T-slots: 5 T-slot distance: 63 mm Distance horizontal spindle - horizontal milling table min.: 70 mm Distance horizontal spindle - horizontal milling table max.: 400 mm Max. load capacity: 285 kg Vertical milling table Length: 830 mm Width: 250 mm T-slot size: 14 mm Number of T-slots: 2 T-slot spacing: 63 mm Coolant system Coolant pump Drive power: 95 W Travel (manual) X-axis: 400 mm Y-axis: 200 mm Z-axis: 335 mm Travel (automatic) X-axis: approx. 310 mm Y-axis: approx. 160 mm Z-axis: 295 mm Vertical spindle Projection: 100 mm Spindle holder: ISO 40 DIN 2080 Speed range: 50 - 1,890 min-¹ Number of speed ranges: 12 steps Tightening bar: M 16 Quill stroke: 120 mm Max. load: 1,100 Nm Feed speeds X-axis: 10 - 600 mm/min Y-axis: 10 - 600 mm/min Z-axis: 10 - 600 mm/min Electrical connection Total connected load: 4 kW Motor(s) Rapid traverse X-axis Drive motor power: 0.375 kW Rapid traverse Y-axis Drive motor power: 0.375 kW Rapid traverse Z-axis Drive motor power: 0.375 kW Dimensions and weights Length: approx. 1,239 mm Width/depth: approx. 1,168 mm Height: approx. 1,900 mm Weight: approx. 1,400 kg EQUIPMENT With digital 3-axis position display DP 700 from NEWALL, inverter drive of the feed axes, control panel with integrated joystick for feed settings, electric feed limit switch-off, ball screw in all axes, central control panel with digital position and speed display, solid cross table with 5 T-slots, coolant device, machine lamp, manual central lubrication.

Condition: good (used), SACHMAN - R / Bed milling machine with 3-axis digital display Heidenhain ND 780 -Table dimensions 2000x560mm -Automatic longitudinal travel of the table 1800mm -Automatic transverse travel of the spindle slide 745mm -Automatic vertical movement of the milling head 825mm -Distance between spindle / column 800mm -Spindle speeds 30 - 2000 rpm -Heidenhain 3-axis digital display / ND 780 Fjbovduhfsvl Nu Segb -Universal angle head -Feed rates 1.5 - 600 mm/min -Rapid traverse in all three axes -Tool holder ISO 40 -Drive power 12Kw -Max. Workpiece weight 2500 - 3000Kg -Machine feet -Documentation Dimensions: LxWxH 3.3x2.4x2.6 meters / weight 6000Kg Errors / input errors reserved

Condition: reconditioned (used), Functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 380 mm, feed length Z-axis: 350 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 63 rpm, quill stroke: 50 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 2 m/min, rapid traverse Z-axis: 4 m/min, table width: 800 mm, table length: 360 mm, table load: 200 kg, overall weight: 1,600 kg, workpiece weight (max.): 200 kg, power: 5 kW (6.80 HP), year of last overhaul: 2024, Ladies and Gentlemen, We are selling a Maho MH500M universal milling machine, which stands out due to its extremely simple and convenient operation. For example, all feeds can be infinitely adjusted by potentiometer. The machine has been extensively overhauled in our workshop so that it is technically and visually in excellent condition. All guides are in good order, the gears run quietly and the levers are easy to operate. Availability: on request Working range X: 500 mm Working range Y: 380 mm Working range Z: 350 mm Speed range of the main spindle: 63 - 4,000 min/-1 Gear stages: 2 Tool holder: SK 40 Tool clamping: Hydraulic Quill stroke: 50 mm Table variant: rigid Table clamping surface: 800 x 360 mm T-slots: 14H7 - 5 / 63 Max. table load: 200 kg Feed speed: 1 - 2,000 mm/min Rapid traverse ( X / Y / Z ): 4 / 2 / 4 m/min Total power requirement: 5 kW Machine weight: approx. 1.6 t Space requirement: approx. 3.0 x 3.0 x 2.5 m Additional equipment and accessories: coolant device, work lamp, electrical supports, foot pedal for tool clamping (optional) Our service promise to you: - We are a certified master company in the field of mechanical engineering Fgsbvlornnf Nj Nu Ssb - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice - On request, you can order additional accessories such as tools etc. directly with the machine - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: excellent (used), Fixed bed milling machine Zayer model KF 3000 with CNC heindenhain 355, prepared with external computer for cad cam, table 3000mm x 1000mm, travels, longitudinal 2700mm, transverse 1250, vertical 1000mm, rapid advances 15000mm/min, huron iso 50, spindle speed 3 ranges 3000 rpm variable, recently repaired huron head, with change of gear pair and all the bearings of the same head.power 30kw, weight admitted on table 10000kg, machine in good condition, weight of the machine 25tns. Fgebovdv Tcevl Nu Seb

Year of construction: 1979, Condition: good (used), Tisch 720 x 410 , Rund-Kipp- Schwenktisch, X-500, Y-400, Z-400 , SK 40,Digitalanzeige ,50-2.500 U/min , diverse Werkzeugaufnahmen Fjbvlen Tpn Sj Nu Sjgb

Year of construction: 1987, Condition: excellent (used), Manufacturer MAHO Type MH 800 T year of construction 1987 control Heidenhain TNC 355 technical data Working range X way 800 mm Y path 450 mm Z path 500 mm Table rigid angular table 900x600 mm Workpiece weight max 800 kg working spindle 63-3150 u/min Fobolzkdlsvl Nu Sjgb Machine dimensions length 3817 mm width 3937mm height 2047 mm Weight 4100 kg

Condition: good (used), Year of construction: 1996, Functionality: fully functional, machine/vehicle number: 5.49.10.07, feed length X-axis: 15,000 mm, feed length Y-axis: 15,000 mm, travel distance X-axis: 710 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, table width: 600 mm, table length: 1,200 mm, TECHNICAL DETAILS Machine type: CNC milling machine Manufacturer: MIKRON Type: UMS 710 Control: HEIDENHAIN TNC 426 Serial number: 5.49.10.07 Year of manufacture: 1996 Table and axes Table length: 1,200 mm Table width: 600 mm Longitudinal travel (X-axis): 710 mm Transverse movement (Y-axis): 630 mm Vertical travel (Z-axis): 500 mm Spindle Spindle speed up to: 6,300 rpm (42,000* rpm with high-frequency spindle) Fjbvju Dnarel Nu Ssgb Tool changer Number of tools: 20 Feed rates Longitudinal: 0 mm/min to 15,000 mm/min Transverse: 0 mm/min to 15,000 mm/min Vertical: 0 mm/min Milling spindle motor Power: 11 kW Weight and dimensions Machine weight: approx. 4,690 kg Dimensions (L x W x H): 4,700 mm x 2,100 mm x 2,700 mm EQUIPMENT Rigid angled table High-frequency spindle with 42,000 rpm (make: FISCHER) Set of tool holders Coolant / mist extraction system (make: FIBARON) Machine can be inspected assembled and energized for inspection after consultation.

Condition: good (used), Tool milling machine MAHO MH 800 -travel X/Y/Z 700-350-450mm Fgsbovbrf Aevl Nu Sob -table surface 940x510mm -Spindle holder SK 40 -spindle speed 32-1600 rpm -Automatic longitudinal / cross feeds -Automatic feed / vertical milling head -Coolant device -Various tool holders -More technical data / See photos Dimensions: LxWxH 1.9x1.7x1.9 meters / Weight: 3500Kg Errors / input errors excepted

Condition: like new (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, quill stroke: 60 mm, table width: 650 mm, table length: 350 mm, overall weight: 1,800 kg, Equipment: documentation/manual, Ladies and Gentlemen, We are selling a Kunzmann WF4/3 CNC milling machine built in 2004. The machine can be operated manually and controlled. The Heidenhain TNC124 control is ideal for learning the basics of CNC programming and is nevertheless very popular in production and for machining special parts. The vertical milling head, which can be folded away very quickly, rounds off the Kunzmann as a real all-rounder with a small footprint. The machine has been thoroughly checked by us in the workshop and is therefore in absolutely new condition. You are welcome to see this for yourself in advance. Availability: immediately Year of manufacture: 2004 Control: Heidenhain TNC124 Table: rigid angular table 650x350mm travels: X400mm/Y350mm/Z400mm Quill stroke: 60mm Connected load: approx. 7kW Speed range: 1-4000 rpm Feed rate: 0-2000 mm/min Tool holder: SK40 Equipment and accessories: Coolant device, central lubrication, manual, documentation, machine feet, electronic handwheel, etc. Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can overhaul the selected machine completely or partially Fgobvl Nueu H U Hke Ssb - On request, you can also order additional accessories such as tools etc. directly - On request, we can fit additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: not inspected (used), - tool balancer Fgebvjppalgsl Nu Seb - KAISER (Switzerland) UMS 1 / SK 40 - No. 718.221 - for toolholders ISO 40 - with SYLVAC unit

Year of construction: 1993, operating hours: 13,924 h, Condition: excellent (used), x-400,y-330,z-350,Winkeltisch 630x335,SK 40, 40-6.000 U/min,Meßtaster , Fobvjfgz Rkol Nu Ssgb Steuerung Heidenhain TNC 425

Condition: ready for operation (used), Rotary indexing center RT100/12-26 Manufacturer: Pfiffner Serial number 1101141101 Switch-on hours 42.500 footprint 14m x 8m Fjbvlji Ewn Es Nu Segb

Condition: used, TECHNICAL DETAILS - Strokes : 320 x 150 x 375 [mm] - Distance between vertical spindle-table surface : 310 [mm] - Distance between horizontal spindle-table surface : 410 [mm] - Spindle speeds (continuous adjustment) : 58-2000 [Rpm] Fobvl Nueuhbw No Ssgb - Spindle taper : 30 ISO - Feeds : 12-400 [mm/min] - Fast feed up : 1200 [mm/min] - Supply : 3 x 380 [V/50 Hz] - Motor power : 1.5 [kW] - Total installed power : 2.1 [kW] - Machine floor space : 1500 x 1100 x 1600 [mm] - Machine weight : approx. 700 [kg] EQUIPMENT - Revolving vice - Irrigation system

Condition: good (used), Year of construction: 1968, Stock number: 2908 Manufacturer: CUGIR Romania Year of construction: 1968 Machine number: 3266 Type / Model: FU-1 Travel x-y-z: 700 - 370 - 250 mm Fjbvlevc D Ape Nu Sogb Table: 1,250 x 320 mm Speed range: Spindle holder: SK 50 Feed rates: Rapid traverse: Connection: 7.5 kW Accessories/equipment: Condition: good Weight: approx. 2.5 tons Dimensions: 2,000 x 2,000 x 1,700 mm

Condition: excellent (used), Functionality: fully functional, Ladies and Gentlemen, We hereby offer milling machines of the type Deckel FP3. The machine is at least technically checked in our workshop and is therefore fully functional. We are looking forward to your inquiry ! Delivery time: on request Dimensions: 2,00x1,60x1,90m (LxWxH) Weight: approx. 1500kg X-axis travel: 500mm Y-axis travel: 300mm Z-axis travel: 380mm Table clamping surface: 800x420mm Speed range: 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Axes with feed: X, Y, Z Feed speed: 10-500mm/min Rapid traverse: approx. 1500mm/min Further equipment and accessories: on request Fobvl Nueq H Eabo Ssgb Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can overhaul the selected machine completely or partially - You are free to choose the paint color of the selected machine - On request, you can order additional accessories such as tools etc. directly with the machine - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: not inspected (used), Rundtaktcenter RT100-12-14 Manufacturer Pfiffner Fgebji Ewnpjvl Nu Sob serial number 08/116 Switch-on hours 51.068 footprint approx. 14m x 8m

Condition: good (used), Type / Model: Turn-tilt-swivel table Table top: 540 x 245 mm Clamping surface: 460 x 175 mm Stop surface: 290 x 195 mm Slot width: mm Febvl Nueva Edpe Ssgb Groove spacing: mm Table cross adjustment: 135 mm Features: can be rotated, tilted and swiveled Condition: good Weight: 80 kg Dimensions: 550 x 500 x 300 mm

Condition: reconditioned (used), Functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, Ladies and Gentlemen, We hereby offer a Deckel FP1 3-axis active milling machine with retrofitted safety devices. These machines of the newer version have, among other things, central lubrication, an electric coolant pump and a brake motor. In addition, the control cabinet can be disconnected from the machine in no time at all thanks to the Harting plug. This type of connector is also used to connect the safety components to the control cabinet, so that handling is not compromised in any way. The retrofitted safety devices, which we can offer for every machine type, come with a 12-month guarantee! The electronic spindle guard can be adjusted in several axes and is designed to prevent interference with the working spindle as well as hazards from flying chips, coolant, etc. The electronic spindle protection cap is designed to prevent interference with the rotating stub shaft and tool clamping. Delivery time: on request Year of manufacture: 1989-1992 Machine no. 2102-xxxx Table: rigid angular table Fgobvl Neuw Uu Nju Sob Travel: X300mm/Y160mm/Z340mm Quill stroke: 60mm Connected load: 1,9KW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: Stepless 5-500 mm/min Rapid traverse: 1200mm/min Equipment and accessories: Coolant device, central lubrication, manual, machine feet, electronic spindle protection, electronic spindle protection cap Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can overhaul the selected machine completely or partially - On request, you can also order additional accessories such as tools etc. directly - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: good (used), Machine table Type: Turn-tilt and swivel table Fobvl Njva D Tisu Ssgb Origin: probably WMW or TOS milling machine Size: 800 x 240 mm Clamping surface: 700 x 240 mm Number of clamping grooves: 5 Clamping groove width: 12 / 20 mm Clamping groove depth: 13 / 22 mm Stop surface: 320 x 200 mm Features: can be rotated, tilted and swiveled Dimensions: 800 x 250 x 300 mm Weight: 67 kg

Condition: reconditioned (used), Year of construction: 1989, Dear Sir or Madam, for sale is a partially overhauled Deckel FP1 with 3-axis TNC113 active control, which is particularly distinguished by its ease of operation. This newer version from year of manufacture 1989 has among other things a central lubrication, an electric coolant pump and a machine lamp. The machine has been extensively overhauled in our workshop and is therefore in excellent condition. You can convince yourself of this on site. In the course of the partial overhaul, among other things, the following work was performed: - Spindle bearing of the milling head renewed - Repainting - Various standard parts such as handles, oil sight glasses, keys etc. renewed - Wear parts like drive belts etc. renewed - Bellows partly renewed - V-guides adjusted - and much more... Fgebvljpy Eldj Nu Sjb Delivery time: immediately year of manufacture: 1989 Machine No. 2102-xxxx Table: rigid angle table travels: X300mm/Y160mm/Z340mm quill stroke: 60mm Connected power: 1,9KW number of spindle speed: 16 Speed range: 40-2000 rpm Dlp00n tool holder: SK40 feed rate: stepless 5-500 mm/min rapid traverse: 1200mm/min Equipment and accessories: coolant system, central lubrication, manual, machine feet Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and possibly worn parts are exchanged in advance - On request, we overhaul the selected machine completely or in part - If desired, they can order additional accessories such as tools, etc. directly with - On request we can mount further accessories like safety devices etc. for you - Gladly we take care of the dispatch and/or the bringing in

Condition: good (used), Dividing head Make: unknown Chuck: 160 mm 3-jaw chuck Center height: mm Fobvl Nuova D Nqj Sjgb Footprint: 220 x 260 mm Perforated disk: 220 mm Pitch: 46; 47; 49; 51; 53; 54; 57; 58; 59; 62; 66 Dimensions: 500 x 500 x 250 mm Weight: 76 kg

Condition: good (used), Type / Model: UPA5 P50 Febvlsva Dyps Nu Sogb Mounting: SK40 Setting accuracy: 0.01 mm Accessories: see pictures Equipment: with 2 feeds, rapid return, manual drive Packaging: Original 365 x 315 x 1700 mm Condition: good Application: Lid FP1, FP2 and similar machines

Condition: good (used), Stock number: 2915 Make: Kuhlmann Type / Model: GML/2 Fgobou Sx Nmjvl Nu Sob Machine number: Travel x-y: 360 - 200 mm Stencil table / work table: 500 x 320 // 350 x 200 mm Speed range: 475 to 19,600 rpm Gear ratio: 1:1.5 to 1:10 Accessories/equipment: Writings Power requirement: 0.55 kW Condition: very good Weight: 0.25 t Dimensions: 1,300 x 1,100 x 1,700 mm

Condition: good (used), Stock number: 2857 Fgsbvot Si Ulol Nu Sjb Manufacturer: WMW Einsiedel Year of manufacture: Machine number: 1930801288 Type / Model: FW 200x630/III Travel x-y-z: 380 - 140 - 230 mm Table: 630 x 200 mm Speed range: 67 to 1,500 rpm Spindle holder: horizontal SK 30 Vertical collet chuck holder Feed rates: 10 to 125 mm/min Rapid traverse: 2,100 mm/min Connection: 2.2 kW Accessories/equipment: Condition: good Weight: 1 t Dimensions: 1,000 x 700 x 1,500 mm

Condition: like new (used), Manufacturer: Steinel Type: FVK 3 Mounting: MK Stop surface W x H: 260 x 420 mm Hole spacing at top: 165 mm Hole spacing at bottom: 200 mm Hole spacing at an angle: 110 mm Diameter inside: 130 mm Condition: very good Fgsbvl Nusugr Ams Seb Weight: 33 kg Dimensions: 260 x 230 x 420 mm