Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 With this device, you can mill treads and risers very precisely and accurately. The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Fpodeyxr T Tepfx Aa Asf Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: excellent (used), CATALOG NUMBER: 6857 TECHNICAL DATA - Spindle diameter: 30mm Fedpfjytf Rgex Aa Aepf - Spindle height: 140mm - Interchangeable spindle - Height adjustable (up/down) - Guide fence - 4 spindle speeds + right/left rotation: 3000, 4500, 6000, 9000 RPM - Table size with extension: 1970x990mm - Motor: 5.2kW - Extraction port diameter: 1x80mm, 1x120mm - Dimensions (L/W/H): 1920x1050x1130mm - Weight: 550kg ADVANTAGES – German manufacture – Used milling machine – Very good condition Net price: 11,900 PLN Net price: 2,830 EUR Net price calculated at exchange rate 4.2 PLN/EUR (in case of major exchange rate fluctuations the price may change)

Condition: excellent (used), Catalogue number 6691 TECHNICAL DATA - spindle diameter: 25mm - spindle working height: 100mm - interchangeable spindle - spindle lock - height adjustable (up/down) - spindle support - hold-downs - original cast iron fence with full adjustment - 4 rotation speeds + reversible (right/left): 3000, 4500, 6000, 9000 rpm - table dimensions + mitre gauge: 1020x900mm - motor: 6kW - extraction port diameter: 2x120mm - dimensions (L/W/H): 1100x1070x1640mm - weight: 658kg – spindle support – mitre gauge Fpsdpfxjytd Rfe Aa Aef – brake – very good condition, used milling machine Net price: 11,500 PLN Net price: 2,740 EUR Net price calculated at 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: ready for operation (used), Year of construction: 2015, total width: 1,400 mm, total height: 1,800 mm, overall weight: 1,850 kg, spindle motor power: 7,500 W, product length (max.): 2,700 mm, spindle speed (max.): 6,000 rpm, Spindle moulder manufactured in 2015. This STETON INDEX machine features a programmable electronic control system with a 10.4” color touch screen, allowing for efficient management of machining parameters. It includes two profiling spindles with a vertical stroke of 265 mm and a maximum tool diameter of 240 mm, providing versatility in operations. Consider the opportunity to buy this STETON INDEX spindle moulder. Contact us for further details. Control system • Electronic control with programmable system • 10.4” color TFT touch screen • Control of vertical movement of 1st and 2nd profiling spindles • Program memory for machine parameters, tools, and machining programs • Frame or single element processing management • USB port (data input, backup, service) Fpsdpfx Aeykpw Eea Asf • Automatic star–delta motor start • Self-braking electric motors • Emergency stop and limit switchesProfiling spindle 1 • Usable length: 320 mm • Spindle diameter: 50 mm • Vertical stroke: 265 mm • Speed: 6000 rpm • Max. tool diameter: 240 mm • Pneumatic center guide • Motor power: 7.5 kW (15 A) • Extraction outlet diameter: 150 mm • Rotation: clockwise / counterclockwise (anti-tear function possible)Profiling spindle 2 • Usable length: 320 mm • Spindle diameter: 50 mm • Vertical stroke: 265 mm • Speed: 6000 rpm • Max. tool diameter: 240 mm • Pneumatic center guide • Motor power: 7.5 kW (15 A) • Extraction outlet diameter: 150 mm • Rotation: counterclockwiseGrooving spindle (3rd spindle) • Horizontal movement: pneumatic • Vertical stroke: 40 mm • Horizontal stroke: 150 mm • Spindle height: 80 mm • Spindle diameter: 30 mm • Speed: 6000 rpm • Max. tool diameter: 200 mm • Motor power: 3.0 kW • Rotation: counterclockwiseFeed unit • Feed speed: 3–15 m/min (variable) • 12 rubber-coated rollers • Roller diameter: 120 mm • Feed motor power: 0.75 kW • Pneumatic vertical adjustment of first two rollers (photo-cell controlled)

Condition: ready for operation (used), Year of construction: 2019, overall weight: 2,000 kg, number of axes: 3, This 3-axis KOMPAS F 2030 Industry was manufactured in 2019 and features a 3000x2000mm working area. It includes an automatic Mach3 CNC control for feeding, sawing, and milling, with a maximum speed of 10,000 mm/min. The machine is equipped with a 3 kW milling motor, angle-adjustable circular saw, pneumatic clamping, and a chip extraction system. If you are looking to get high-quality milling capabilities, consider the KOMPAS F 2030 machine we have for sale. Contact us for more information. • Working area: 3000 × 2000 mm • Control: Automatic Mach3 CNC control (Hungarian user manual included) • Max speed: 10,000 mm/min • Milling unit: • 3 kW water-cooled milling motor • Milling tool diameter: 1–13 mm • Tool change system Fpsdpjycv Axefx Aa Ajf • Safety covers on motors (brush-type), included for milling unit • Saw unit: • Angle-adjustable circular saw with 4 kW motor • Pneumatic angle cutting method • Saw blade moves in Z direction • Max blade diameter: 400 mm • Protective cover above the saw blade • Table rotates with angle indicator in X–Y plane • Clamping: Pneumatic clamping • Measurement: Automatic length measurement • Safety: Optical emergency stop safety system • Included: Control computer and software • Installation & operating conditions: • Foundation: 10 cm thick concrete required • Rubber pads integrated into machine feet • Operating temperature: 10–30 °C • Hours: Used max. 700 hours Additional equipment • Roller material infeed system: Front and rear, rollers on both sides • 5 m in front of the machine and 2 m behind • Chip/Dust extraction system: Dust extraction with four collection bags

Condition: good (used), Code: 0324 Brand: OMEC Model: 750 Automatic milling machine for dovetail joints on drawers and various furniture parts Fpsdsytr Sdepfx Aa Ajf Technical data: Useful working width 480 mm Thickness of drawer fore parts 60 mm Number of joints per minute: at 1st speed 25 , at 2nd speeds 35 Electric motor power of toolholder spindle 1,5 Hp Electric motor power trip traverse 1,5 Hp Overall dimensions mm 800 X 1300 X 1200 h Weight kg 350

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Swivel Spindle Moulder T23 - Year of manufacture: 1982 Fjdpfoyrn Hhsx Aa Aspf - 380 Volt - 7.5 kW - Brake motor - Tiltable 45° - with Haffner 4-roller feed unit - Cast iron jaws for the moulder fence Transport available at extra cost!

Condition: ready for operation (used), Year of construction: 2025, This 3-axis QUICK CNC UE-481 was manufactured in 2025. It features a 1300 x 2500 x 200 mm working area, a 9 kW high-performance spindle, and a linear tool changer. The vacuum table has 6 zones, complemented by a Becker 250 m³/h vacuum pump. It includes a 3-sided safety fence with a front light barrier, tools, and dust extraction. If you are looking to get high-quality CNC routing capabilities consider the QUICK CNC UE-481 machine we have for sale. Contact us for more information. Fpodpex D Dnqjfx Aa Aef Application Types CNC Wood Machining

Condition: good (used), Year of construction: 1977, functionality: fully functional, Table milling machine Type F Fjdpfxjx E Dctj Aa Aspf - Year of manufacture: 1977 - 3, 4, 5, 6, 8, 10,000 rpm - Right-/left-handed rotation - Milling spindle 30 mm - Clamping length 140 mm - Wooden-jaw fence with fine adjustment, rotatable - Table size: 1200 x 800 mm - Weight: 700 kg - With Holz Her 3-roller feed unit - Margin scheme taxed Shipping available at extra cost!

Condition: new, - Sturdy steel and cast iron construction - Dynamically balanced milling unit anchored to the work table - Especially robust design - Smooth operation thanks to precision assemblies and high intrinsic weight - Standard with reversing function (left/right rotation) and electronic interlock when changing direction - Five speeds from 3,000 to 10,000 rpm - Speed change is easily and conveniently operated from the machine side - Standard with MK 4 quick-change spindle system - Large cast iron work table for long-term precision - Easy handling via control elements and speed display located at the front of the machine - Large dimensioned milling fence with fine adjustment and aluminum fence jaws as standard - Fence adjustment via hand crank - Numeric display of the set spindle height, accurate to 0.1 mm - Powerful industrial motors This product comes with a 3-year Stürmer warranty upon online registration. Warranty applicable to end customers in Germany and Austria only. Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3-Po Box 168, 36016 Thiene-Vicenza, Italy Fjdpou T Hhksfx Aa Aspf Dimensions and Weights: - Net weight approx.: 510 kg Dust Extraction Connection: - Number of extraction ports: 2 - Extraction port diameter: 80 mm - Number of extraction ports on fence: 1 - Extraction port diameter on fence: 120 mm Work Table: - Work table length: 2,500 mm - Work table width: 810 mm - Table height: 923 mm Placement Information: - Space requirement explanation: Dimensions take into account the maximum travel ranges or usable lengths. - Working area length: 3,700 mm - Working area width/depth: 5,000 mm - Working area explanation: Please add the specified measurements to the space requirement to obtain the recommended free installation area for the machine. Equipment: - Milling fence: Heavy-duty professional version with aluminum fence jaws and fine adjustment, adjustment from the front via hand crank with numeric digital display - Curved milling safety hood - Spindle height adjustment: manual - Spindle tilt adjustment: manual - Control: manual adjustment of milling unit height and tilt - Control element position: located on the machine body - Table configuration: table extension on left and right, and pull-out workpiece support (total width 2,500 mm) Electrical Data: - Connection voltage: 400 V - Mains frequency: 50 Hz - Drive motor power: 7.0 kW Milling Spindle: - Spindle tilt: -45 to +45° - Usable spindle length: 140 / 180 mm - Usable spindle length explanation: for spindle Ø 30–35 mm / for spindle Ø 40–50 mm - Milling spindle stroke: 90 mm - Quick-change spindle: MK 4 - Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm Max. Milling Tool Diameter: - Max. tool diameter (lowerable): 320 x 60 mm - Max. profile milling diameter: 250 mm - Max. tenoning diameter: 350 mm - Max. form milling diameter: 160 mm

Year of construction: 2000, condition: used, We offer this used machine P. BACCI TSG 2T, year of manufacture 2000. Model/Type: TSG 2T Serial number: 3074 Year of manufacture: 2000 Voltage: 380 V Frequency: 50 Hz Motor power: 3.75 kW Weight: 970 kg Fjdoyx S T Tspfx Aa Aspf If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Code: 0320 Brand: SAC SUERI - ITALY Model: T 4 - CE Standard Electronic tenoning machine for wooden frames, doors, cabinet doors, furniture, and various - CE Standard Technical data: Fodoytg R Ispfx Aa Aopf End trimming saw with continuous axis positioning - Horizontal stroke 130 mm - Motor power 3,2 Kw - Blade diameter 400 mm Hole 30 Tenoning spindle - Spindle length 320 mm - Spindle diameter 50 mm - Motor power 5,5 Kw - Continuous axis positioning - Max tool diameter 350 mm Tenoning carriage table size 750 x 900 mm - Motor power 1,1 Kw - Working speed 3/10 mt/min - Positioning speed 30 mt/min - Tilting guide - Guide with stop and display Min workpiece height 30 mm Max workpiece height 90 mm Min workpiece width 30 mm Max workpiece width 600 mm Min/max workpiece length 200/3000 mm Max tenoning depth 130 mm Max squaring width 1000 mm Electronic control of all machine functions - Alphanumeric keyboard - Monitor LCD 9,5"- 800 storable programs - Free programming by the operator - Sequential work programs Suction port diameter mm 100/160 Overall dimensions mm 2250 x 1800 x 2050 h Weight kg 1800

Condition: used, machine/vehicle number: 3052/20, Details see pictures Fsdpfx Aetq Sgvoa Aspf

Condition: good (used), Technical Specifications: Motor: 1.5 kW Fjdpfswm Dlkjx Aa Aopf Three-phase voltage: 220/380 V / 50 Hz Speed: 2800 rpm Max. mortising depth: 150 mm Max. slot length: approx. 170 mm Max. chain width: 40 mm Max. longitudinal table travel: 160 mm Max. transverse table travel: 90 mm Incline: 5 degrees Weight, machine: 72 kg Weight, stand: 35 kg Approx. dimensions: (HxWxL): 190 x 54 x 60 cm

Condition: excellent (used), functionality: fully functional, Edge banding milling machine with Holz Her 3-roller feed unit, 30 mm spindle, 50 mm milling width. Machine dimensions: 1000 x 1000 x 1300 mm, weight: 250 kg, in good condition, fully functional. Shipping available at additional cost. Fodjvkgdrepfx Aa Ajpf

Condition: excellent (used), IM Very good condition. Fpjdpfxeyxnxlo Aa Ajf

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1750x1300x1150 mm Fedpfsv A Hh Ujx Aa Ajpf Weight 600 kg Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x900x1370 mm Fjdpfev A Hh Iex Aa Aopf Weight 530 kg Total power requirement 5,5 kw

Condition: used, Motor output 5,9 kW Spindle diameter 30 mm reus 3000 / 4500 / 6000 / 9000 U/min Fsdpfx Aajyrhv Ne Aspf Panhans Type 259 swivel spindle milling machine or table milling machine for precise milling, profiling, and rebating of solid wood and wood-based materials. The machine has a swiveling milling spindle, enabling versatile machining at different angles. Ideal for carpentry, furniture making, and interior design. Includes Haffner feed device.

Condition: new, Number of milling spindles 2 St. fence 1 ja workpiece ja Cross rung milling machine STEGHERR TYPE KSF-mini including standard stop with 2 sliding stops, without tools With the KSF-mini, all of those that occur in practice can be used Crossbar connections can be made quickly and precisely. The Precise execution is achieved by having the workpiece in one Clamping is machined on three sides. The tool is driven by two three-phase motors; the tension of the Workpieces pneumatically. The profile cutter is designed for the web width. The saw blades that... If you carry out flattening, spacer rings are used to match the dimensions of the Profile milling cutter adjustable. The swivel device is free of play. The machine is designed for a maximum workpiece cross section of 56 x 46mm. Voltage Europe: 400V(+/-10%)/3Ph/50Hz, USA: 440V(+/-10%)/3Ph/60Hz Other voltages on request. Operating instructions in German or English. Table base € 1.030.00 Foot switch € 870.00 Adjustment optics € 130.00 Profile milling cutter in HM-Wepla version, available for selection: Ø 5,7,9,11,13 mm. Price per piece € 630.00 1 set of replacement insert knives for profile milling cutters (=10 pieces) € 180.00 HM saw blade, price € 160.00 per piece (For a web of e.g. 10 mm, 3 saw blades are required) Setting the machine to the tools provided by the customer, price € 680.00 per individual tool Packaging in a crate (suitable for land transport) € 650.00 Packaging shrink-wrapped on a pallet (only within Europe, Fjdpfxeyrtzqs Aa Aepf not for air freight) € 340.00 Pricing ex works, unpacked, uninsured, for delivery within Germany plus the VAT valid at the time of delivery. (all technical information according to the manufacturer, without guarantee!)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x900x1370 mm Weight 530 kg Total power requirement 5,5 kw Fpjdpev A Hirsfx Aa Aof

Condition: excellent (used), Rounding machine tool for poles/stakes production. Diameter of finished product from 40 mm to 140 mm. Machine tool was renovated. New bearings, new back side shoulders gears, renovated electrical cabinet and installed new optical sensor for pneumatic pressure, partly renovated pneumatic system (3 new cylinders). Fjdpsuvg Htefx Aa Aepf

Condition: used, Used machine, requires inspection. Fedpfoyx Axtox Aa Aspf

Condition: used, Year of construction: 1997, Catalogue number 7724 TECHNICAL DATA - number of working spindles: 6 pcs - spindles pressed pneumatically onto the material - milling units adjustable up/down, right/left, and at angles - 6 pneumatic clamps - stepless feed speed adjustment - max milling height: 130mm - max milling length: 2500mm - max milling width: 330mm Fedpfxeya Hl Ee Aa Aepf - shaft diameter: 40mm Motor power: - milling units 1-2: 2 × 5.5kW - milling units 3-4: 2 × 4.5kW - milling units 5-6 universal (sanding or milling): 2 × 4.5kW - extraction nozzle diameter: 10x152mm - air supply requirement: 6-8 bar - dimensions (L/W/H): 8000x3000x2420mm - weight: approx. 6000kg ADVANTAGES – Italian manufacture – For through-feed processing of curved elements according to template – 6 milling units – Not repainted – Safety guards – Original DTR + CE documentation – Used machine in very good condition Net price: 46,900 PLN Net price: 11,160 EUR (based on 4.2 EUR exchange rate) (Prices may change depending on exchange rate fluctuations)

Condition: excellent (used), operating hours: 20 h, CATALOG NUMBER 7874 – Manufactured in Poland - Excellent condition – only 20 operating hours – Original documentation DTR + CE – Additional knives included – Additional bushings included: 18mm, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29mm - Knife setting tool included - Used machine, original paint (not repainted) Technical specifications: - Diameter of produced dowels: 180–300mm - Max. diameter of raw wood before processing: 380mm - Max. allowance for machining: 40mm per side - Min. input material length: 1100mm - Knife head drive motor: 55kW - Stepless feed speed adjustment + forward/reverse: 1.5–8 m/min - Feed motor: 7.5kW Configuration: - 8 toothed infeed driven rollers - 4-knife cutter head - 6 smooth outfeed driven rollers - 7 pneumatic hold-downs - Additional bushings included Fpjdpfx Aasyab Rvj Ajf - Additional knives included - Operating pressure: 6 bar - Electric cabinet dimensions (LxWxH): 900x400x1600mm - Machine dimensions (LxWxH): 4100x1650x2300mm - Weight: ~4000kg Net price: 199,900 PLN Net price: 47,600 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)