Used mills for sale (103)

Condition: excellent (used), Year of construction: 1981, machine/vehicle number: 1345, Machine Type: Two-Roll Mixing Mill (Mischwalzwerk) Hjdpfx Adeyx Etgewju Main Manufacturer: TROESTER MASCHINENBAU (Sontra, Germany) Year of Construction: 1981 Origin: Made in Germany (West Germany) Heating System: Integrated heating system, equipped with temperature sensors. Main Motor: EMOD (Herbert Odenwald Elektromotorenfabrik KG) Power: 45 kW (60 HP) Protection Class: IP 23 Current/Voltage: 88A / 380V (Delta) / 50Hz Speed (n1): 1465 U/min Gearbox (Transmission): Jahnel Getriebebau GmbH (Bochum) Type: D 450 SO Ratio: 16.4 : 1 Output Speed (n2): 89.3 U/min Oil Specifications: ISO-VG 320 Safety Features: Equipped with built-in temperature sensors for motor protection (Kaltleiter-Temperaturfühler 130°C).

Year of construction: 1996, condition: good (used), functionality: fully functional, Manufacturer Rapid Type 1521-L Year of manufacture 1996 Hedjvndpajpfx Adwou

Operating hours: 100 h, condition: used, functionality: fully functional, Heavy-duty granulator. Rotor width 1200 mm, rotor diameter 660 mm, with 5 rows of knives, one with a V-cut blade, 3 counter knives, one of which serves as a deflector, which can also be removed. Hopper and screen basket open hydraulically. Weight approx. 7700 kg. Machine has only been in operation for approximately 100 hours. No wear. Hjdpjv Iqrnjfx Adwou Optionally available with feed conveyor belt or suction system.

Year of construction: 1995, condition: used, functionality: fully functional, 3 rotor blades Hjdsv Nnr Ijpfx Adwju 2 stator blades Blade inlet 220 x 180 mm Power 3 kW

Year of construction: 2006, condition: used, Granulators - Cutting Mills Weima WNZ 310/600 22 KW Year: 2006 Power: 22 kW Application: Feed opening: 650x600 mm Hsdpforl Ru Dsx Adwou No. rotor knives: 10 No. stator knives: 2 Rotor-Ø: 310 mm Rotor-width: 600 mm Price: € 12.900,00 contact: Mr. Rainer Eckerle

Year of construction: 2016, condition: as good as new (ex-display), 3x piece docking mills Rapid Type: G15042 Docking G15035 Docking Year 2016 ,2010, 2009 Hjdpolwqtbsfx Adwou

Year of construction: 2004, condition: excellent (used), Mill Rapid 1528, 2.2 kW, inlet 38 x 42 cm, height 173 cm, 12 knives, 2 pastry boards, 2002, 2004. Hedpfx Adsyzmw Eeweu

Year of construction: 1999, condition: excellent (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with a new set of blades -Manufacturer: Getecha, Side-mounted mill cutting mill -Type: GRS182-A1.50 -Funnel opening: 310 x 290 mm -Sieve perforation: Ø 6 mm Hjdpfxezrfbnj Adwou -Dimensions: 720/700/H1220 mm -Weight: 210 kg

Year of construction: 2003, condition: used, Getecha GRS 300 A1.1.1 5,5 KW year 2003 knives like new ! Year: 2003 Hsdpfx Ajqnul Asdwou Power: 5,5 kW Application: Feed opening: 300x450 mm No. rotor knives: 10 No. stator knives: 2 Rotor-Ø: 300 mm Rotor-width: 105 mm Price: € 3.450,00 contact: Mr. Rainer Eckerle

Year of construction: 2022, condition: ready for operation (used), A Getecha plastic granulator is available. Rotor diameter: 300mm, cutting width min./max.: 400mm/1260mm, number of rotor knives: 5, power: 5.5kW. Including an enlarged control cabinet. Overhauled with less than 100 operating hours. Documentation available. Hodpfjucw S Eox Adwju

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 3,000 kg, rotor diameter: 400 mm, number of blades: 10, total length: 1,120 mm, total height: 1,950 mm, control cabinet length: 500 mm, control cabinet width: 300 mm, control cabinet height: 1,500 mm, total width: 1,210 mm, rotor width: 600 mm, power: 22 kW (29.91 HP), type of input current: three-phase, sieve perforation: 6 mm, warranty duration: 12 months, input voltage: 400 V, inner dimension width: 590 mm, opening width: 400 mm, Equipment: CE marking, ZERMA GS 400/600 – High-Performance Granulator | Precision. Performance. Reliability. Experience the new ZERMA GS 400/600 high-performance granulator in action. The GS series was developed for the highest demands in plastic recycling and combines maximum performance with exceptional reliability and easy maintenance. Highlights ✔️ Rotor diameter: 400 mm ✔️ Rotor width: 600 mm ✔️ Proven ZERMA V-Cut technology Hjdezmhgiepfx Adweu ✔️ 5-knife rotor ✔️ 3 stator knives ✔️ Robust steel construction ✔️ Intelligent drop-down cutting system ✔️ External knife adjustment ✔️ Robust bearing outside the cutting chamber ✔️ Optional bypass hopper for long profiles and pipes ✔️ Designed for continuous industrial operation Typical applications * Packaging tapes (at 8 mm, 600 kg/h) * Runners and injection molded parts + start-up lumps up to 1 kg * Plastic profiles * Pipes * Sheets * Films * Blow molded parts * Engineering plastics * Production waste * Post-industrial recycling The GS 400/600 stands for precise shredding, high throughput, and long service life – the ideal solution for modern plastic processors and recycling companies.

Year of construction: 1999, condition: used, Rapaid mill Type: 1528 - L Year of manufacture: 1999 Hedpfx Adsxrv S Rjwju

Condition: good (used), Year of construction: 2007, Single shaft shredder Weima WLK10 main motor 55kw rotor length 100cm the machine is 100% efficient Hjdpfx Astpcpnjdweu

Condition: good (used), functionality: fully functional, Manufacturer PRM Hedouwdv Aspfx Adwsu Type MGK2121R-1 Year of manufacture 1995 Power 3 kW

Year of construction: 1997, condition: used, Getecha GRS 252 - A10.26 5,5 KW year 1997 knives verygood ! Year: 1997 Power: 5,5 kW Application: Feed opening: 400x400 mm Hodpfx Aoqnuluedwou No. rotor knives: 10 No. stator knives: 2 Rotor-Ø: 300 mm Rotor-width: 105 mm Price: € 2.950,00 contact: Mr. Rainer Eckerle

Year of construction: 2003, condition: used, Bollegraf Hammermühle AS 75/850 year: 2003 power: application: feed opening: rotor- Ø: rotorb width: 850 mm price: 24.500 Euro contact: Mr. Rainer Eckerle Hodpsg T Id Njfx Adwju

Condition: ready for operation (used), 🔧 Key Specifications Cutting System: Four-shaft configuration with two cutting shafts and two clearing shafts. Hjdpfxownx Uis Adweu Cutting Disc Diameter: Approximately 280 mm (11 inches). Cutting Unit Dimensions: Working width of 1,000 mm and length of 700 mm. Hopper Opening: Approximately 1,400 mm x 1,600 mm. Motor Power: Typically equipped with two 18.5 kW motors. Operating Speed: Low-speed operation at around 25 rpm for high torque and reduced noise levels. Weight: Approximately 2,500 kg

Year of construction: 2008, condition: excellent (used), Piovan grinder Hjdpeighlpofx Adwou Type: RN 20/30 Year: 2008 Article no.: 439

Condition: used, Year of construction: 2006, beside the press granulator Tria 20-18 JM 1,5 KW Manufacturer: Tria Type: 20-15 JM Manufacture year: 2006 Power: 1,5 kW Intake: 180x200 mm Rotor knife: 4 Stator knife: 2 Rotor diameter: 180 mm Rotor width: 200 mm Tria 20-18 JM 1,5 KW year 2006 Hjdpfx Ajwiwcbodweu price: € 1,950 contact: Mr. Rainer Eckerle

Year of construction: 1994, condition: used, functionality: fully functional, Plastic granulator with feed conveyor and dedusting system The CONDUX plastic granulator CS 300/300-S-II is a reliable solution for the size reduction and granulation of plastics. Equipped with an integrated feed conveyor and dedusting system, it ensures continuous processing in a clean working environment. Its robust design guarantees durability and consistent performance, making it ideal for recycling and recovery processes. Hjdpfx Ajwtfavedwju

Condition: new, Year of construction: 2026, power: 45 kW (61.18 HP), Knife Granulator PC42100R – 45 kW – NEW GrabTrade has specialized in the sale of machinery and complete technological solutions for the recycling industry for many years. We are the official representative of 3E Machinery in Poland. We offer new and used shredders, knife granulators, and complete recycling systems. We offer a new industrial knife granulator, 3E Machinery PC42100R, equipped with a powerful 45 kW main motor and a 1,000 mm wide rotor. The PC42100R is designed for efficient size reduction and granulation of various types of plastic and other recyclable materials. Its robust construction and specially designed cutting system ensure high efficiency, stable operation, and a uniform final fraction. TECHNICAL SPECIFICATIONS: Hedoznbv Hepfx Adweu Model: PC42100R Type: Industrial knife granulator / cutting mill Main motor power: 45 kW Rotor length: 1,000 mm Rotor diameter: 420 mm Cutting chamber: 1,034 × 540 mm Moving knives – V arrangement: 3 × 2 / 5 × 2 pcs. Moving knives – S arrangement: 3 × 10 / 5 × 10 pcs. Fixed knives: 2 × 2 pcs. Standard screen perforation: 12 mm Machine dimensions (L × W × H): 1,770 × 1,842 × 2,425 mm Machine weight: approx. 3,230 kg Condition: Brand new The PC42100R is also available in a 55 kW motor version, depending on the customer's requirements and processed material. APPLICATIONS: The PC42100R knife granulator is suitable for processing various recyclable materials, including: PP, PE, HDPE, and LDPE plastics, plastic lumps and purgings, injection molding waste, plastic pipes and profiles, plastic crates and containers, sheets and technical plastics, pre-shredded cable waste, various production and industrial plastic waste. The machine can operate as an independent granulator or as part of a complete recycling line. For larger or bulkier materials, we recommend combining the PC42100R with a single-shaft shredder with a hydraulic pusher, which performs the first shredding stage. The pre-shredded material is then transferred to the PC42100R for final granulation. GrabTrade offers complete systems consisting of a pre-shredder, knife granulator, material transport system, and Big-Bag collection station. MAIN ADVANTAGES: Powerful 45 kW drive Heavy-duty industrial construction 1,000 mm wide cutting rotor Large 1,034 × 540 mm cutting chamber Efficient V-type cutting system Replaceable screen for controlling the final material fraction Suitable for continuous industrial operation Can be integrated with shredders and complete recycling lines Possibility of pneumatic material transport to a Big-Bag station Professional technical support and spare parts availability Machine available in our offer. We provide professional technical advice, commissioning, after-sales service, and full access to spare and wear parts, including knives and screens. Full range of our knife granulators, shredders, and complete recycling systems: GrabTrade – shredding and recycling machines.

Year of construction: 1998, condition: excellent (used), Plastic granulator Getecha, year 1998, 5.5 kW. Hodpfx Ajx I I N Ajdwsu

Condition: excellent (used), functionality: fully functional, Manufacturer: "Alpina" Cutting mill, suitable for secondary shredding. Drive: 15 kW Fully functional, with control panel. - Optional with blower and extraction to cyclone. Hsdetw Sf Sepfx Adwju Matching conveyor belt in stock. Machine testing possible upon agreement.

Year of construction: 2006, condition: excellent (used), 8 units of PRM auger feeder mills Type: MGK 400/175 Year of manufacture: 1992, 1994 Hodpfjhry Tiox Adweu Available: 8 units

Year of construction: 2006, condition: used, Single shaft shredder Weima WLK10 main motor 55kw rotor lenght 100cm the machine is 100% efficient Hedpfx Adsi Ew Tmewsu