Used Mills for sale (140)

Condition: used, machine/vehicle number: 11481, Rotor diameter: 300 mm Rotor width: 600 mm 3-blade rotor Deb Ejghgmzstzgqskl 4 rows of stator blades Inlet cross-section approx. 250 x 600 mm Drive motor 37 kW

Condition: used, machine/vehicle number: 11431, Rotor diameter: 450 mm Rotor width: 600 mm Paddle rotor 3x3 rotor blades (offset), 2 rows of stator blades Inlet cross-section approx. 550 x 625 mm Drive motor 30 kW Suitability: Dkjb Etzgoghgl Sjqsl Primarily for shredding hollow blow moldings and bulky molded items such as bottles, canisters, jugs, bowls, baskets, buckets, tubs, etc.

Condition: used, machine/vehicle number: 11415, Rotor diameter: 260 mm Rotor width: 260 mm 3-blade rotor, 2 rows of stator blades Deb Etoghgl Ijzgqjkl Inlet cross-section approx. 260 x 260 mm Drive motor 5.5 kW Grinding mill with built-in feeder for bar stock. Weight approx. 500 kg

Condition: used, machine/vehicle number: 11181, Rotor diameter: 400 mm Rotor width: 600 mm Deb Ejghgkqstzgqjkl 3-knife rotor, 2 stator knife rows Inlet cross section approx. 400 x 600 mm Drive motor 30 kW

Condition: used, machine/vehicle number: 10976, 3-blade rotor Dkebeghgihe Etzgqel 2 rows of stator blades Rotor diameter: 350 mm Rotor width: 250 mm Inlet cross-section for profiles: approx. 250 x 100 mm Machine in noise-protection enclosure

Condition: used, machine/vehicle number: 8802, Inlet cross section approx. 650x1000 mm 3-knife rotor (staggered knives) Djb Eoghgiaotzgqjkl 2 stator knife rows Rotor diameter 500 mm Rotor width 1000 mm

Condition: used, machine/vehicle number: 10930, Rotor diameter: 400 mm Rotor width: 500 mm Dkjb Eeghghretzgqol Rotor blades: 6 Stator blades: 4 Inlet cross-section approx. 500 x 400 mm Drive motor: 18.5 kW

Condition: used, machine/vehicle number: 10460, 5-blade rotor 2 rows of stator blades Rotor diameter 400 mm Dksb Etzgoghgg Ujqjl Working width 600 mm Inlet cross-section approx. 500 x 600 mm

Condition: used, machine/vehicle number: 11056, 3-blade rotor Deboghghke Etzgqskl 2 rows of stator blades Rotor diameter: 350 mm Working width: 600 mm Inlet cross-section: approx. 600 x 450 mm Machine with noise protection box

Condition: used, machine/vehicle number: 10461, 3-blade rotor (offset blades) Deb Eoghgg Rotzgqekl 2 rows of stator blades Rotor diameter 300 mm Working width 600 mm Inlet cross-section approx. 440 x 600 mm

Condition: used, machine/vehicle number: 11058, 3-blade rotor 8 rotor blades (staggered) Djbeghgg Ho Etzgqjkl 2 rows of stator blades Rotor diameter: 200 mm Rotor speed: approx. 900 rpm Working width: 880 mm Inlet cross-section: approx. 130 x 845 mm

Condition: used, machine/vehicle number: 3349, 2-blade double rotor Dkeb Eeghgf Notzgqjl 3 rows of stator blades Rotor diameter: 150 mm Working width: 200 mm Inlet cross-section: approx. 350 x 210 mm

Condition: used, machine/vehicle number: 10875, 3-blade rotor Dob Etoghgfzjzgqskl 2 rows of stator blades Rotor diameter: 280 mm Rotor width: 600 mm Inlet cross-section: approx. 280 x 600 mm Weight: approx. 800 kg

Condition: used, machine/vehicle number: 9895, 3-blade rotor (offset blades) 2 rows of stator blades Dob Etzoghgfwjgqjkl Rotor diameter: 500 mm Working width: 700 mm Inlet cross-section: approx. 500 x 700 mm

Condition: new, machine/vehicle number: Baureihe GSP, When crushing long pipes and profiles, conventional granulators are faced with considerable problems. In most cases, pits or platforms are needed to allow feeding of the long and bulky parts. This is why ZERMA has developed the GSP series. Thanks to the almost horizontal feed hopper, long parts can be conveniently fed and the risk of blockage is eliminated as the machine doses automatically. In the event of overfilling of the grinding chamber, no further material is accepted until work can continue without motor overload. Djb Etzgoghgftjqjkl ZERMA also offers a wide range of options such as exhaust systems, conveyor belts, metal detectors, fines separators, etc.

Condition: new, machine/vehicle number: GSH, The ZERMA GSH series granulators are extremely stable machines for the toughest demands and tailored to the versatile requirements of a modern recycling operation. The housings, manufactured in heavy steel/welded construction, withstand even extraordinary loads. Bearing, blade mounting and rotor shaft are far oversized and therefore extremely resilient. By simple retooling, massive lumps and thick-walled pipes as well as hollow bodies and foils can be shredded effortlessly. Depending on the individual task (and also for temperature-sensitive materials), different rotor variants are available, but they all have one thing in common: the modern and superior V-cut technology. Dkjbsghgflj Etzgqol All machines of the GSH series always deliver a high-quality regrind - whether from bottle crates, profiles, sheets, foils, or start-up lumps and tubes. They are economical, very reliable, easy to clean, and have a long service life. In combination with the extensive range of ZERMA options, accessories (such as extraction systems, conveyor belts, metal detectors, fines separators, roller feed systems, etc.) as well as spare parts, an individually optimized size reduction system is created. The advantages are shown in a considerably reduced effort in terms of costs, time and personnel. Sophisticated housing design The housing is divided diagonally in the middle and the upper part with feed hopper can be opened hydraulically so that the rotor is completely exposed for knife changes and cleaning. The sieve insert is also held by a hydraulically swiveling sieve basket, and accessibility is thus optimal for removal and installation of the sieve. Reversible sieve insert. Robust external bearing Another well thought-out design feature is the bearing arrangement outside the machine. Robust roller bearings in steel bearing housings guarantee a long service life and are ideal for the toughest conditions. The external bearing prevents grease from entering the grinding chamber, and vice versa, grinding material or fines from entering the bearing. This is another significant advantage, especially when the machine is operated in wet conditions. Flywheel In order to compensate for shock loads during comminution, a flywheel is available as an option. For attachment, the rotors have a second shaft end as standard. High operational reliability All granulators comply with EC machinery directives and are CE marked. Accident safety is ensured, for example, by overrun protection devices with limit switches and hydraulically unlockable check valves.

Condition: new, machine/vehicle number: Baureihe PM / Neumaschine, The impact disc mills (fine mills) of the PM series are high-speed centrifugal mills for fine grinding of almost all thermoplastics. Typical tasks are the fine grinding of regrind or primary material from profile, pipe or sheet extrusion. In addition, these mills can be used in the food, chemical and pharmaceutical industries. The material is centrally fed by the stationary grinding disc with dosing element. Fine grinding takes place between the rotating and stationary grinding discs. The material is discharged by means of pneumatic suction. Dsbsghgb Nj Etzgqskl

Condition: used, machine/vehicle number: 8799, Inlet: 400 x 800 mm Rotor diameter: 400 mm Width: 800 mm Rotor blades: 5 Stator blades: 2 Dsb Etoghgb Eszgqekl Drive: 45 kW Sprue mill, granulator, plastic mill, cutting mill

Condition: used, machine/vehicle number: 5257, Inlet: 800 x 200 mm Rotor diameter: 200 mm Width: 880 mm Rotor blades: 3 Stator blades: 2 Drive: 5.5 kW Dkjb Etzoghgbzjgqel

Condition: new, machine/vehicle number: Baureihe GSC / Neumaschine, The compact cutting mills in the GSC series are completely soundproofed cutting mills and therefore particularly quiet. The integrated soundproofing ensures ideal accessibility to the cutting mill itself and for changing the blades and screens thanks to its well thought-out design. The noise protection is based on the use of the latest soundproofing materials. The housings, manufactured in a stable steel/welded construction, in conjunction with the V-cut rotors (except GSC 300/300), enable a long service life and universal applicability. The tangential housing geometry means that even bulky feed materials are easily accepted and shredded by the rotor. Dsb Etzoghgbwogqekl All machines in the GSC series always deliver high-quality ground material - regardless of whether the feed material is injection molding or blow molding waste, profiles, plates or films. The types in the GSC series are cost-effective, very reliable, easy to clean and have a long service life. Integrated sound insulation: The integrated sound insulation ensures a pleasant working environment with a low noise level. The optimal design ensures ideal accessibility to the machine. Mobile compact design: The integrated sound insulation makes the cutting mills compact and mobile. The machines can be transported to any location using a pallet truck or forklift. ZERMA offers a variety of options such as extraction systems, conveyor belts, metal detectors, fine material separators.

Condition: new, machine/vehicle number: Baureihe GSE / Neumaschine, Economical cutting mills: This GSE series is ideal for all injection molding and blow molding companies. It is basically suitable for all thin-walled plastic waste. These cutting mills are characterized not only by their low purchase price, but also by their robust, split steel/welded housing, the easy cleaning option and easy blade and screen changes. Thanks to the tangential housing geometry in conjunction with V-cut rotors (except GSE 300/300), even bulky and large-volume feed parts are accepted and shredded by the rotor. Grinding material transport: Dkob Eeghgbtotzgqjl The cutting mills are equipped with an extraction system and bagging station as standard. A grinding material collection container is also available as an option, which, like the extraction tray, is made of stainless material.

Condition: new, machine/vehicle number: Baureihe GSL 300 / Neumaschine, The cutting mills in the GSL series 300/400 to 300/800 are primarily intended for the shredding of production-related scrap material in the injection molding and blow molding sectors. Dkeb Etjghgbhszgqsl In addition to the key advantages of the GSL series, the slow-running cutting mills GSL 300/400, GSL 300/600 and GSL 300/800 are particularly suitable for large-area parts, such as car door panels, bumpers or hollow bodies. The "V-arrangement" of the rotor blades keeps the pre-shredded material in the center of the rotor. This significantly reduces wear on the grinding chamber walls when grinding glass fiber reinforced plastics. Material sticking to the side walls is avoided. The staggered arrangement of the rotor disks means that only individual blades are used at any one time, so a higher cutting force is available in each case.

Condition: new, machine/vehicle number: Baureihe GSL 180 / Neumaschine, The ZERMA auxiliary mills of the GSL series 180/120 to 180/430 were developed as low-speed mills especially for applications in the injection moulding sector. They have a rotor diameter of 180 mm and working widths of 120 to 430 mm. The rotor is driven directly by a geared motor. The special rotor knives can be reground several times. The material to be shredded is fed via a noise-reduced feed hopper of sandwich construction, which is available in different versions depending on the type of feed. Depending on the task, the side mills of this series are mounted on a low or high chassis and completed with a corresponding suction/outlet trough. Together with numerous options, the side mills are extremely variable in use. In addition to the usual advantages of all low-speed mills, such as low noise emission and almost dust-free grinding material, the GSL 180/120 to GSL 180/430 beside-the-machine mills are characterized above all by their knife, rotor, quick-snap system and by their good accessibility. Dobjghgbdo Etzgqokl

Condition: used, machine/vehicle number: 13237 13238, - Feed belt 0.75 kW - GSE 300/600 #13237 Rotor diameter: 300 mm Rotor width: 600 mm Rotor blades: 3 Stator blades: 2 Dsb Etzgswbwxtjqokl Inlet cross-section approx. 300 x 600 mm Drive motor: 18.5 kW - MFT 20-250 Big Bag Extraction System

Condition: used, machine/vehicle number: 13213, Rotor diameter: 600 mm Rotor width: 1000 mm Rotor blade rows: 7 Stator blade rows: 2 Dkjbowbwxmj Etzgqol Inlet cross-section approx. 720 x 980 mm Drive motor: 90 kW