Used pellet mills for sale (35)

Condition: used, functionality: fully functional, Performance for 6 mm diameter pellets 2.5-3 t/h We used it for about 5 years. It was purchased used but in very good condition. All bearings were replaced 1 year ago. It was working very well before it was disassembled. Ijdsx S Ibgspfx Abvjic A new die with rollers has been manufactured for it and is available for an additional price. For additional information, please write on Whatsapp.

Condition: used, Year of construction: 1985, functionality: fully functional, For sale: granulator from the renowned manufacturer Buhler. Granulator model: DPAA-660 Motor power: 160 kW – option to install a more powerful motor – 200 kW. Die diameter: 660 mm, Die working width: 160 mm, Granulator output on straw / sawdust: 2 – 2.5 t/h The granulator is currently dismantled. For a committed buyer, we will assemble it using new wear parts. Contact for more photos and details. Machine available for inspection in Sępólnie Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland. Iijdpow Uh Nzefx Abvjc

Condition: new, Year of construction: 2026, Bio Machines has been designing production lines, manufacturing machinery, and providing assembly services for over 20 years. We offer both complete production lines and individual machines, tailored to your needs. Our solutions include: Pellet production lines Briquette production lines Drying systems: rotary and belt-type Hammer mills Moving floors Feed bins Wood chippers Chain, bucket, screw, and belt conveyors Cyclones Silos Pellet coolers Sawdust and pellet sifters Bagging machines for small bags and big bags Palletizing lines for bags And many other specialized machines Isdpfjylm Tyex Abveic

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, type of input current: three-phase, 🔶 P SYSTEM P300 – PELLET PRESS 30 kW USED – REFURBISHED BY THE MANUFACTURER Industrial pellet press P System P300 – 30 kW, complete with control panel, refiner, and dedicated hydraulic power unit. Used machine, refurbished by the manufacturer, ready for installation and/or integration into a complete pelletizing plant. Compact, sturdy, and reliable solution for the production of pellets from sawdust and fine biomass. 📊 Main technical data Main motor: 30 kW Output: up to 350 kg/h* Material: sawdust and fine wood chips Required moisture content: 13–14% Typical energy consumption: • approx. 25 kWh at 250 kg/h of pellets • approx. 30 kWh at 300 kg/h of pellets *Productivity and power consumption may vary depending on material type, particle size, and moisture content. ⚙️ Included configuration ✔ Control panel ✔ Refiner ✔ Dedicated hydraulic power unit ✔ P System industrial frame 🔧 Possible upgrades • Pellet discharge screw conveyor • Mini-silo, feed conveyor, or container for raw material collection • Magnetic separator • Additional refiner • Dust recirculation filter • Pellet collection hopper • Manual or automatic bagging system 📍 Immediate availability (subject to prior sale) 📦 Condition: used – refurbished by the manufacturer 🚛 Delivery: ex works (EXW Cremona, Italy) 💰 PRICE Ijdpfoyk Etvex Abveic €39,250.00 + VAT (ex works – EXW Cremona, Italy)

Condition: used, Granulation and packaging line. Model: HM700E PRO 11KW Year of manufacture: 2022 It includes: Iiedpexcy D Eofx Abvjc Hammer mill - shredder Chip mixer Chip feeder Granulator Vibrating table Product feed belt (conveyor belt) Pellet hopper with packaging equipment Bag sealer and chip moisture meter Hammer mill with cyclone Motor: 11 kW / 400 V Productivity: 300 - 700 kg / h Weight: 360 kg Soft start installed Cutting system 16 hammers Chip mixer: Volume: 1.0 m³ Chip feeder: Motor: 3.3 kW / 380V Feeds up to 800kg / h Granulator: Motor: 22 kW / 380V/50hz; Productivity: 300 - 700 kg/h Weight: 590kg Soft start installed Vibrating table: Weight 90kg Product feed belt (conveyor belt): Dimensions: 5m × 0.4m. Automated packaging equipment: Dimensions: 1, 90x2, 50x2, 30 Volume: 1.5m³ Packing in bags: 1 - 50kg Equipped with two types of scales Bag sealer 220V Moisture meter

Condition: used, Pellet presses Manufacturer: Bühler Model: RPWPR 900.138 EX 4 presses - Bühler 3-4 tons per hour 4 mixers 4 feed screw conveyors 20 m long stainless steel chain conveyor 16 m long output conveyor Iisdpfx Abjw Iy T Sjvec Soft starters

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW Iisdpfx Abjwp Rqfjvsc The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: new, functionality: fully functional, We offer a high-quality low-speed pellet granulator. The pellet mill is 100% manufactured at our ECOMAS Polska Czernikowo facility. We guarantee equipment engineered for continuous 24/7 operation. Our machines produce pellets that comply with EU standards—properly compacted, free from harmful additives, and with a calorific value of at least 4.6 kWh/kg. The main advantage is the use of modern, hardened dies and rollers (60HRC+), manufactured using CNC technology. Our dies ensure high output, low energy consumption, and long service life for both dies and rollers. Another benefit is the main shaft lubrication system featuring oil and oversized bearings, which significantly reduces wear! Are you struggling with your current granulator—frequent bearing failures, low efficiency, die blockages, high energy consumption, fast wear of parts, etc.? With our machines, these problems are eliminated. We provide a tailored approach to every customer! See our machines in action by searching YouTube for: ecomas_polskie_peleciarki Available power options: 7.5kW, 11kW, 15kW, 18.5kW, 22kW, 30kW, 37kW, 45kW, up to 55kW. Configuration: Iodpfjxk Ta Njx Abvsic - Complete head with 2/3/4/5 rollers on cylindrical bearings - Welded body—completely filled with Orlen Oil Transol VG 320 - Cylindrical-bevel gearbox (98% efficiency) - Base frame - Bolted dies: Ø230, Ø260, Ø285, Ø310, Ø400, Ø520; hole diameters: 3, 4, 5, 6, 8, 10mm (100% stability, easy disassembly, and temperature control) - Standard oil tank or optional tank with pump and oil system (oil lubrication, easy oil change) - User manual - 12-month warranty The buyer receives a comprehensive operating manual and a one-year warranty. We offer full warranty and post-warranty support. Prices listed below in the attached PDF file. *Product and technical solutions are protected.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, power: 75 kW (101.97 HP), Complete pelletizing line consisting of: - Pellet press OGM 1.5 - Hammer mill - Cyclone - Cyclone with fan - Screw conveyor - Material silo - Material mixer for pellet plant - Elevator - Pellet collector - Control cabinet - Pellet cooler TECHNICAL DETAILS Isdpfx Asw Rmpfsbveic Capacity for wood: 1 tonne/hour Capacity for straw: 1.5 tonnes/hour Die for sawdust: 8 mm Elevator height: 6 m MACHINE DETAILS Pellet press OGM 1.5 rated power: 75 kW Hammer mill rated power: 55 kW Cyclone with fan rated power: 11 kW

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Pellet plant and bagging system - Inspection possible - Raw material bunker 4 cubic meters with discharge into a cutting mill, suitable for wood chips up to or smaller than G30 + conveyor belt - Cutting mill 22.5 kW with soundproof cabin - Material bunker 4 cubic meters with discharge conveyor belt, LP series Iodpfx Absw Hrg Novjic - Pellet press LP22 (Integrated central lubrication, water pump, and temperature monitoring ensure a high level of user-friendliness) - Screening unit with conveyor for LP22 (incl. fill level sensor for big bag with pivoting holder and sensor cable for connection to pellet press LP22) - Big bag frame Vario 1.5m³ - Bagging system suitable for Vario BigBag system For further information, please do not hesitate to contact us.