Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Electric thickness table adjustment with fine adjustment Motor power 4 kW Planing width 510 mm Total length of the jointer table 2200 mm 4-knife planing cutterhead Cutterhead speed 4700 rpm Planing height 3 - 230 mm Feed speeds 8 + 14 m/min Weight approx. 750 kg Gujdpezhuz Aofx Al Iog

Condition: used, Thickness planer: Max. planing width: 520 mm Max. planing height: 250 mm Cutterhead diameter: 110 mm Number of knives: 4 Cutterhead speed: 5000 rpm Manual adjustment of the working height Jointer: Total length of tables: 2130 mm Adjustable tables Noise reduction of the cutterhead Cutterhead guard Dust extraction port: 120 mm Tilting fence Power supply: 400 V Motor power: 5 kW Guodszu Ahkepfx Al Ijg Overall dimensions: Length: 2130 mm Width: 1140 mm Height: 1300 mm

Condition: good (used), Year of construction: 2000, Leadermac LMC 523 Smartmac four side planer - year of production 2000 - DTR - electronic height and width adjustment - possibility to save permanent parameters TECHNICAL PARAMETERS: - planing width 230 mm - planing height 140 mm - diameter of the spindles 40 mm Gsdpfx Aloifftxe Ioug 1 lower spindle 7.5 kW 2 right spindle 5.5 kW 3 left spindle, 5.5 kW 4 upper spindle 7.5 kW 5 lower spindle 7.5 kW smoothly adjustable feed 3 kW feed motor power electronic height adjustment electronic adjustment of the left head feed on cardan shafts five top steel pull rollers two upper rubber pulling rollers one role in the table top pulling pneumatic material pressure minimum material length 400 mm length of the preliminary table 2000 mm chrome tables stub diameter 5 x 125 mm Machine dimensions 370 x 200 x 190 cm weight ~ 3000 kg

Condition: good (used), Weinig Hydromat H 23 Profiling Jointer Gujdszwwi Uopfx Al Ijg

Condition: excellent (used), CATALOG NUMBER 7620 TECHNICAL DATA - shaft width: 410 mm - table length: 2220 mm - cast iron tables - both tables adjustable - original cast iron fence - motor approx. 3kW - dimensions (L/W/H): 2220x800x1140 mm - weight: 504 kg ADVANTAGES – German-made – used jointer – in very good condition Net price: 6900 PLN Net price: 1640 EUR based on 4.2 EUR rate (Prices may vary with significant exchange rate fluctuations) Gujdjzrlb Ujpfx Al Iog

Condition: used, functionality: fully functional, SCM F410 Planer/Thicknesser Specifications: • Condition – used, inspected • Manufacturer – SCM • Model – F410 • Working width – 410 mm • Bed length – 2610 mm • Adjustable infeed table angle • Motor power – 3.0 kW • Spindle speed – 5000 rpm • Chip thickness indicator • Max. removal depth – 8 mm • Noise-reducing combs near the shaft • 4-knife shaft with a diameter of 120 mm for traditional knives • 0-1 start • Weight – approx. 650 kg Gjdpszd Stbsfx Al Isug • Overall dimensions: 261 x 85 x 105 cm (L x W x H) Additional information: • The machine is in good technical condition and ready for immediate use • The photos show the actual condition of the item • Possibility to turn on and test the machine on-site • Free training on machine operation (at our company premises) • The price listed in the auction does not include VAT and transport costs Financing and transport: • We organize transport using MDD’s fleet, courier companies, or external carriers • We offer financial support in the form of leasing or leasing financing

Condition: good (used), Year of construction: 1981, For inquiries: Zoltán Utasi Plus 36 30 205 7380 pindle configuration: Bottom Right Left Top Gedpfxjy Nmv Do Al Isug Bottom Spindle speed: 6000 rpm Working width: 170 mm Working height: 120 mm Jointing table length: 2 m Equipped with Waxilit pump Infinitely variable feed speed: 7–18 m/min Side pressure roller Motorized pressure beam adjustment Equipped with 5 cutter heads (3 pcs L180 mm, 2 pcs L130 mm) Machine documentation available

Condition: excellent (used), Precision setting gauge for Weinig Hydromat Mandrel – 50 mm Guodozwwk Sepfx Al Iog

Condition: excellent (used), Catalog number 7289 TECHNICAL DATA - max. width of workpiece 230mm - max. height of workpiece 170mm Guodpfx Aszwwc Iel Iog 6 spindles: 1) horizontal lower 230mm 5.5kW 2) vertical right 170mm 3) vertical left 170mm (spindles 2 and 3) 11kW 4) horizontal upper 230mm 11kW 5) horizontal upper 230mm 7.5kW 6) horizontal lower 230mm 11kW - all spindles adjustable up/down, right/left - spindles 4 and 5 with electric up/down adjustment - spindle speed 8000 rpm - spindle diameter 40mm - all spindles equipped with an electric brake - 6 top feed rollers, pulling, toothed, including 1 double roller - top discharge roller, pulling, rubber, double - bottom discharge roller, pulling, rubber, double - side pressure - feed on Cardan shafts - rollers with pneumatic pressure - stepless feed speed adjustment 6-24m/min - feed motor 4kW - electric adjustment of planing thickness - body lifting motor 0.55kW - central lubrication of the table - diameter of extraction nozzles 6x140mm - dimensions (L/W/H) 4900x2400x2000mm - weight approximately 4000kg ADVANTAGES – German production, WEINIG brand – with 6 heads – unpainted – used planer, very good condition Original photos Net price: 122900 PLN Net price: 2926 EUR depending on the exchange rate of 4.2 EUR (Prices may change due to higher fluctuations)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,000 rpm, total length of planing tables: 1,260 mm, total width: 1,280 mm, total height: 1,220 mm, overall weight: 1,200 kg, Equipment: CE marking, documentation/manual, • Operation: 1-axis control for planing dimensions, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence. • Buttons for manual quick and fine adjustment of the planing thickness according to the digital display. • Push buttons for starting and stopping the cutterhead. • Integrated operating hour counter. • TERSA all-steel cutterhead with 4 knives. • 2nd rubber feed roller, 85 mm, complete. • Thickness table extension, foldable, 630 x 450 mm. • Thickness table: Electric thickness table adjustment with fine adjustment, feed speed 10 mm/s, mounted on 4 support spindles to ensure stability, table surface finely planed. • Feed: 2 speeds 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, rubber rollers are material-friendly and self-cleaning, easy roller replacement; articulated pressure bar at the infeed. • Extraction: High-pivoting, divided hood with chip extraction connection Ø 160 mm, can be connected on the left or right (on both sides in special cases), minimum extraction air volume: 27 m³/min. at 20 m/s. Godpfxozvfm Eo Al Ieug • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutterhead via grease nipples. • Weight: approx. 1,200 – 1,400 kg • Workpiece length min. 270 mm.

Condition: excellent (used), Catalogue number 7835 TECHNICAL DATA - Shaft width: 410 mm - Noise-dampening comb - Number of knives: 4 pcs - Table length: 2500 mm - Cast iron tables - Both tables adjustable - Original angle-adjustable guide fence - Motor: 4 kW Guedpfxoztzkbs Al Ijg - Electric brake - Extraction port diameter: 125 mm - Dimensions (L/W/H): 2500x820x1210 mm - Weight: 910 kg ADVANTAGES – Made in Poland – Top control panel – 4-knife cutter block – Used jointer – Very good condition Net price: 15,900 PLN Net price: 3,790 EUR (depending on an exchange rate of 4.2 EUR) (Prices may vary with significant exchange fluctuations)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Working width 230 mm Working height 150 mm 6 heads Head configuration: bottom/right/left/right/top/bottom Ribbed table Head adjustment in two axes Gujdoy N N Upjpfx Al Ijg Chromed infeed table Material width measuring system (mobile spindle) Stepless feed speed adjustment 6-24 m/min Spindle diameter 40 mm Pneumatic pressure feed rollers Year of manufacture 2008

Condition: good (used), Weinig Hydromat 23 Gusdpfx Alozwwhkj Ijg

Condition: used, Year of construction: 1992, Spindle arrangement: bottom – right – left – top Planing width min./max. 8-180 mm Planing height min./max. 5 - 120 mm Length of infeed table: 2000 mm Feed rate: 8 m/min Feed rollers: pneumatic Infeed roller before the jointer Electric height adjustment of the feed beam Manual width adjustment via crank 4 planing cutterblocks, each with 2 knives 1 pre-jointer Fold-up safety guard 4 dust extraction connections Godpsz Abthofx Al Isug Total connected power approx. 18 kW Dimensions approx. L x W x H 3000 x 1000 x 1450 mm Weight approx. 1200 kg

Condition: good (used), Year of construction: 2003, functionality: fully functional, planing width: 230 mm, working height: 100 mm, Planer Moulder P 1000 UNIMAT STAR with 6 Tool Holders Gsdsxyu Itjpfx Al Ieug

Condition: excellent (used), CATALOGUE NUMBER 7556 Technical specifications: - min / max width of the workpiece 20 / 240mm - min / max height of the workpiece 8 / 160mm - number of spindles 4 1) horizontal lower 240mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) horizontal upper 240mm 7.5kW - all heads adjustable up/down, left/right - spindle diameter 40mm – from above: - 6 toothed feed rollers, including 2 double rollers - 2 smooth rubber withdrawal rollers – from below: - side pressure before and after the roller in the lower bed - toothed feed roller, rotating, in the lower bed before the first spindle - 2 pneumatic side presses Gjdpjzu R R Hjfx Al Isug - smooth metal withdrawal roller - all rollers are pneumatically pressed - length of the feed bed 2180mm - bed adjustable up/down - central lubrication - electric adjustment of the planing thickness - lifting motor 0.75kW - stepless feed speed adjustment on a frequency inverter 6-30m/min - feed motor 3kW - feed on Cardan shafts - enclosed in a cabinet + - diameter of the dust extraction nozzle 4x150mm - dimensions L/W/H 3750x1750x1800mm - weight 3300kg ADVANTAGES – with 4 heads – ideal for both wet and dry wood – used machine, in perfect condition Net price: 66900 PLN Net price: 15920 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) Working height: 10 - 160 mm . Working width: 20 - 230 mm. 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor, 60m/min. Heavy duty feed works. Gujdpszv S Atofx Al Iog 10x top feed rollers. First top feed roller with clutch installed for use with mechanisation. 5x bottom feed rollers. Automatic lubrication system. Electric digital display memory system. CNC POSITIONING ON SPINDLES 3, 5 & 8 Possible to supply with Weinig moulder infeed and outfeed

Condition: used, Year of construction: 2002, Working width: 510 mm Planing height: 250 mm Planer cutterhead: Tersa Number of knives: 4 Height adjustment: electric Thickness display: digital display Godpfxszhm Die Al Isug Feed speed: continuously variable Infeed roller: rubber Outfeed roller: rubber Table rollers: no Motor power: 5.5 kW Dust extraction port: 160 mm Machine length: 1200 mm Machine width: 1200 mm Weight: 900 kg

Year of construction: 2006, condition: used, functionality: fully functional, Planer, jointer FELDER plan51 Specification: • Condition – used, after inspection • Manufacturer – FELDER • Model – plan51 • Working width – 510 mm Gedpfxoyy Sr Ss Al Ioug • Table length – 2250 mm • Adjustable tilting fence • Motor power – 7.35 kW • Spindle speed – 5000 rpm • Chip thickness indicator • Max cutting depth – 8 mm • Noise-reducing combs at the shaft • Motor brake • 4-knife shaft, 120 mm diameter, compatible with Tersa knives • Start/stop 0-1 • Chip extraction outlet – diameter 140 mm • Year of manufacture – 2006 • Overall dimensions: 225 x 105 x 125 cm (L x W x H) Additional information: • The machine is in perfect technical condition and ready for immediate use • Photos shown reflect the actual condition of the item • Possibility to run and test the machine on site • Free operator training provided at the company headquarters • Listed price does not include VAT or transport costs Financing and transport: • We organize transport via MDD fleet, courier services, or external carriers • Financing options available: lease or lease loan

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, Due to equipment replacement, a Changa Iron Cm-767C four-sided moulder, year 2010, is for sale. In working condition. Gedpfx Ajy N Eb Ssl Ijug 6 spindles. Working width 18–230 mm, height up to 150 mm. Feed speed up to 36 m/min. Suitable for planing and profiling timber materials. Located in Kandava, inspection possible. Available immediately.

Condition: excellent (used), CATALOG NUMBER 7573 Technical data: - Shaft width: 640 mm - Number of knives: 4 pcs - Max thickness of machined element: 270 mm - Top section: - Safety pawls - Toothed infeed shaft, driven - Hold-downs - Planing shaft - Hold-downs - Outfeed smooth shaft, driven Gsdpoztw I Njfx Al Ijug - Bottom section: - Adjustable rollers in lower table: 2 pcs - Main motor: 7.5 kW - Electric table lifting – lifting motor: 0.75 kW - 2 feed speeds – feed motor: 1.1 kW - Suction outlet diameter: 160 mm - Dimensions (L/W/H): 1150x1240x1170 mm - Weight: 1073 kg ADVANTAGES: – Polish manufacture – Electric table height adjustment – Operating documentation (DTR) – Used thickness planer, in very good condition Net price: 26,900 PLN Net price: 6,400 EUR (depending on 4.2 EUR rate) (Prices may vary with higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 7823 Gusdpjztxbkefx Al Ieg Technical specifications: - Roller width: 640mm - Number of knives: 4 pcs - Maximum thickness of workpiece: 250mm – Top: - Deflectors - Toothed, infeed roller - Pressure rollers - Planing roller - Smooth, outfeed roller – Bottom: - Adjustable rollers in the lower bed – 2 pcs - Motor: 7.5kW - with brake - Electric bed lifting - 4 feed speeds: 8/11.3/16/22.4 m/min - Feed motor: 1.35kW - Dimensions (L/W/H): 1400x1200x1210mm – weight: 1041kg ADVANTAGES – Made in Poland – Electric bed lifting – Used thickness planer, very good condition Net price: 16900 PLN Net price: 4025 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to currency fluctuations)

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, planing height: 300 mm, planing width: 450 mm, overall weight: 5,300 kg, the machine in very good condition, original paint, maximum profile 450mm x 300mm Gjdpoxk S S Rjfx Al Isug

Condition: excellent (used), functionality: fully functional, working width: 410 mm, planing width: 410 mm, Planer, jointer SCM F410 Specification: • condition - used, after inspection • manufacturer - SCM • model - F410 • working width - 410 mm • table length - 2610 mm • fence adjustable for angle • motor power - 4.0 kW • spindle speed - 5000 rpm • chip thickness indicator • max cutting depth - 8 mm • noise dampening combs at the shaft • motor brake • four-knife shaft, 120 mm diameter, for traditional knives • star-delta starter Gjdpfx Aljx E Srvo Ieug • dust extraction outlet - 150 mm dia • weight - approx. 650 kg • CE marked • overall dimensions: 261 x 90 x 110 cm (L x W x H) Additional information: • very good technical condition • the presented photos show the actual condition of the item for sale • possibility to start and test the machine on site.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 121385, Four-side planer Weinig Powermat 2400 - year of production 2015 TECHNICAL PARAMETERS Gedsytfghepfx Al Isug planing width 20 - 230 mm planing height 10 - 160 mm 1 spindle 18,5kW 2 spindle 11 kW 3 spindle 11 kW 4 spindle 18,5 kW spindle speed 6000 rpm feed speed electronically variable incl. brake 6 - 60 m/min feed motor power 7,5 kW 6 upper steel pulling rollers 2 rubber upper pulling rollers Automatic central table lubrication Machine dimensions 3300 x 2150 x 1750 mm Possible to supply with Weinig automatic feeding system High-Mech E1 Machine nr. 121386 feed continuously adjustable Feed drive 3 kw the cost of a complete set 69000 eur.