Condition: used, Year of construction: 2010, Functionality: fully functional, machine/vehicle number: S4 1TT33 3250, total width: 4,340 mm, total height: 2,775 mm, total length: 5,145 mm, working width: 1,350 mm, workpiece height (max.): 16 mm, Viet S4 sanding and calibrating machine. * 1st Longitudinal sanding unit T60 E IPP HP DU; Belts 1380x3250, Motorization by converter 15 KW * 2nd Transversal sanding unit T60 ET HP DUO , Belts 150x8700, Motorization by Converter 15KW * 3rd Transversal T60 AND HP DUO sanding unit, 150x8700 belts, powered by 15KW converter Variable speed belt 2-20 m/min Deb E Sbjutdrhs U Ajut suction unit.

Condition: like new (used), Year of construction: 2018, operating hours: 2 h, Functionality: fully functional, overall weight: 130 kg, height adjustment type: mechanical, power: 1.1 kW (1.50 HP), input frequency: 50 Hz, motor voltage: 230 V, Profile and strip sanding machine S 220 Dujb E Sbjwa Nmgo U Ast Year of manufacture 2018 With stop rail With extraction nozzle Machine is available immediately

Condition: used, Year of construction: 1986, machine/vehicle number: 8240, Bandanzahl : 1 max. Arbeitsbreite : 1100 mm max. Arbeitshöhe : 150 mm 1. Band : Kombiaggregat Ausführung 1. Walze : Stahlkontaktwalze Schleifschuh 1. Aggregat : starr, höhenverstellbar Schleifbandlänge 1. Aggregat : 2500 mm Schleifbandbreite 1. Aggregat : 1150 mm Antrieb Aggregat 1 : 15 kW Lackschliff möglich : Nein Materialdickenmesseinrichtung : Ja Steuerung : Handbedienpult Elek./pneu. Bandoszilation : Ja Einlasshöhe : variabel (unterer Tisch verfährt) Tischhub : elektro-motorisch Djb E Sowaukdob U Aeut Tischanzeige : digital Betriebsdruck : 7 bar Arbeitshöhe bzw. Aufgabetischhöhe : 850 mm Beschreibung : neuer Teppich und komplette Überhohlung in 2024 Gewicht ca. : 1700 kg

Condition: ready for operation (used), Selling a sanding machine for wooden handles. It consists of two energy-saving IE3 sanding motors, each rated at 1.5 kW, which drive the two sanding belts, as well as a gear motor for transporting the handles through the sander. The adjustable gear drive for the handles through the sander also allows for sanding oval handles. The machine was discontinued, repaired, and stored approximately one year ago. Duob Eewau Uvo Sb U Ast

Condition: as good as new (ex-display), Machine stand in a torsion- and vibration-free design, extremely stable. Sanding unit adjustable up to 45° using a handwheel. Sanding belt - oscillation with separate gear motor. Height-adjustable sanding table to utilize the entire belt width. Standard veneer edge sanding device with fine adjustment, contact shoe, relief rollers and stops. Height-adjustable additional table with extraction for sanding radii. With spring-loaded belt tension. With table extension. Made in EU. Technical data: Table size 960 x 350 mm Table height adjustment 230 mm Belt length 3000 mm Belt width 200 mm Belt speed 20 m/sec Dusb E Sb Ujvrvn Ns Aet Oscillation stroke 20 mm Oscillation motor power 0.25 kW Main motor output 3.8 kW S6 400V (3 kW S1) Weight 400 kg Prices subject to change, errors, printing and typesetting errors reserved

Condition: good (used), Year of construction: 2007, Functionality: fully functional, COSTA belt and brush grinder SA 1 TLFT3 FT3 1350 Manufacturer Costa Levigatrici Italy Year of manufacture 2007 S/N A70420 LL1 4 units Total power 27 kW Weight: 4200 Kg CE marked The machine body is solidly built to be vibration-free and has a fixed working height, i.e. the machine is a line machine. The feed table is precision-machined and specially ground to be perfectly flat. The thickness adjustment is done via the machine's control panel (located on the front wall of the machine) with a control switch. A fine adjustment switch and a digital measuring display with an accuracy of 0.1 mm help with precise adjustment. The thickness of the work is monitored by an emergency stop bar on the front of the machine, which stops the machine (and raises the units) if the piece being sanded is too thick. The sanding belt length of the machines is 2,620 mm (low sanding belt cost and long life). Technical specifications: - Working width: 1,350 mm - the length of the sanding belt 2,620 mm - sanding belt width 1320-1380 mm 1. Electronically controlled, divided segment step unit TP-32 Number of segment sections 42 pieces (width 32 mm / segment) 2.Belt JET BLOWER - cleaning of the blowing nozzles Inverter motor, power 11 kW, belt speed 1-16 m / sec The reading bar on the front of the machine is divided by 32 mm mechanical segment preload with sole graphite wear compensation The segment sanding shoe TP-32 is an electronically controlled and divided pneumatic segment sanding unit. In the device, the sanding pressure is evenly distributed over the entire sanding piece and the pressure can be adjusted from the machine control panel The segment control ensures the feeds taking into account the front and rear ends of the workpieces as well as both workpiece edges. The width of the segment unit is 32 mm and the width of the beam segment of the rail is 32 mm. The sanding mat can be quickly pulled out of the device for cleaning and maintenance. The COSTA segment sanding shoe requires minimal maintenance. The length of the sanding belt is 2620 mm and the motor power can be selected when ordering. The device has a safety brake and pneumatic sanding belt tension. The oscillation of the sanding belt is controlled automatically. The height adjustment of the saddle unit is done manually using an accurate micrometer scale. The hardness of the segment unit can be adjusted precisely to the respective task using the sanding pressure. 3. XLS cross brush sanding unit including 61 sanding boards (H50 x L80), Inverter controlled, 2.2 kW, 0.5-3 m/sec. Cutting speed - grinds the edges and grooves of the workpiece from right to left and from left to right relative to the feed direction FRT-330-SLIPCON/FLEXTRIM – brush grinding unit D 330 mm brush grinding unit with replaceable brushes - drive device 2.2 kW inverter motor 0-400 1/min Duobov Hcdyj E Sb U Aot 4. FRT-330-SLIPCON/FLEXTRIM – brush grinding unit D 330 mm brush grinding unit with replaceable brushes - drive device 2.2 kW inverter motor 0-400 1/min

Condition: new, Year of construction: 2024, Sanding belt size: 150 x 2280 mm Engine power: 2,2 kW Dobodq H D Ss E Sb U Asut Abrasive belt oscillation pneumatic belt tension Swiveling grinding unit 90 ° / 180 ° Additional table on pulley

Condition: new, Functionality: fully functional, working width: 1,100 mm, grinding width: 1,100 mm, grinding height: 170 mm, power: 15 kW (20.39 HP), height adjustment type: electric, grinding belt length: 1,900 mm, grinding belt width: 115 mm, CASADEI LIBRA 35/2 RTC 110 Standard Equipment Two-belt version with 1100 mm sanding width for the cost-conscious tradesman. The LIBRA 35 calibration and fine grinding machine is an extremely versatile and versatile machine. Robust tubular-reinforced monoblock steel machine body with high-mounted working units for maximum rigidity. User-friendly thanks to the clearly laid-out control panel on the front. Motorized table height adjustment. Digital display for the working height. Electronically controlled sanding belt oscillation with reduced compressed air consumption. 1st unit: 120 mm diameter, slanted steel roller with fine adjustment for calibration. Pneumatic on/off of the roller. 2nd unit: Combination unit with finely adjustable working height for calibration and fine grinding: 120 mm diameter rubber-coated roller (45 Sh), hard sanding pad with graphite coating on a replaceable insert. Pneumatic roller on/off Electronic sanding pad, 56-sector spacing Electronic control system FOX 500 KTR Electronic working thickness adjustment Automatic carpet centering ✔ Automatic star-delta start-up for main motor Natural rubber feed carpet with negative profile Support table with two rollers at the inlet and outlet of the feed carpet Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Rubber pressure rollers in front of and behind each working unit Pneumatic belt tensioning for each unit with decimal adjustment of grit/belt thickness Length approx. 1650 mm Width/Depth approx. 1820 mm Height approx. 1960 mm Extraction connection Number of extraction nozzles: 2 Extraction nozzle diameter: 140 mm Dob Ejwa Dbxj Sb U Asut Electrical data Height adjustment motor power: 0.25 kW Feed motor power 0.33/0.55 kW Drive motor power 15 kW Connection voltage 400 V Line frequency 50 Hz Grinding unit Grinding belt length 1900 mm Grinding belt width 1115 mm Maximum sanding width 1100 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Min. height 4 mm Max. height 170 mm #### For many years, we have maintained a partnership-based sales concept with specialist dealers, which is why orders are processed through a recommended partner coordinated with you.#####

Condition: good (used), Year of construction: 1992, Functionality: fully functional, working width: 1,300 mm, Wide belt sander Manufacturer Ott Model RSO-1300 Duob E Sev T R Dzeb U Aet Year of manufacture 1992 Working width 1300mm with roller 15 kw and shoe 11 kw +brush Feed speed 10m & 20m

Condition: excellent (used), Brusa di Garboli LPC 300 orbital sander Minimum grinding diameter 5mm Maximum grinding diameter 100mm Dueb E Sb Usv N Id Ro Ajt Minimum bending radius 150mm Sanding belt dimensions 940x60mm Total power 4kw

Condition: as good as new (ex-display), Belt and edge sander demonstration machine. Professional belt and edge sander for commercial and industrial use. Very stable frame construction. Can be dismantled for transport. Can be converted to an edge sander in just a few handles. Extra strong table guides, extremely low maintenance thanks to dust-protected construction. Dusbovrvqks E Sb U Ast CE compliant Technical data: Table size 2500 x 800 mm Max. workpiece height 550 mm Motor output 3.8 kW S6 at 40% duty cycle (3 kW/S1) Motor voltage 400 V Sanding belt dimensions 7000 x 150 mm Weight 470 kg Optional equipment: Foldable table for edge sanding Right-left running switch Electric table lift Symbol photo

Condition: not inspected (used), Sanding belt length 2280 mm Dujb Esvrzcle Sb U Aot Sanding belt width 140 mm Motor 2.2 kW Table length 1000 mm Circular grinding device Extraction fan Transport device

Condition: excellent (used), Year of construction: 2004, working width: 1,250 mm, working height: 160 mm, For sale Viet Valeria 3 CCT 1350 Sup and Viet Valeria 3C INF 1350 top-bottom grinding line · Max. working width: 1250 mm · Max. working height: 160 mm · Upper belt dimensions 1400x3250 mm, lower belt dimensions 1400x2620 mm The upper and lower control units include: · steel shaft - 45 kw with a diameter of 320 mm, Djb Eowbp N Rs Sb U Ajut · rubber shaft 30 kw, · grinding pad/pneumatic shoe 16 kw. Line control using Siemens touch panels. Heavy Duty line - designed for long-term and intensive use. 100% efficient line ready to work. Full documentation available for inspection. The line is connected. It is possible to test it.

Condition: as good as new (ex-display), Year of construction: 2023, Functionality: fully functional, total width: 2,000 mm, total height: 2,070 mm, total length: 1,800 mm, grinding width: 1,350 mm, power: 11 kW (14.96 HP), grinding belt length: 2,150 mm, grinding belt width: 1,370 mm, extraction nozzle diameter: 200 mm, power of feed motor: 800 W, motor voltage: 400 V, Slight signs of wear from demonstration. The LIBRA 45 is characterized by a rich range of standard equipment, a very robust construction (both the base frame and the work units), sanding shoes with a larger contact surface and modern control systems Motorized table height adjustment Digital display for the working height Electronically controlled sanding belt oscillation with reduced compressed air requirement Automatic star-delta start-up Natural rubber feed carpet with negative profile Automatic carpet centering Support table with rollers at the inlet and outlet of the feed carpet Large sanding roller diameter 140 mm Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front of and behind each work unit Pneumatic belt tension for each unit with decimal correction option for grain size/belt thickness Equipment: Work table height adjustment with electronic display of the working height Oscillation of the sanding belts with electronic system Rubber-coated grooved pressure roller at the inlet 1° position with Backflow protection (C.E.) Djb E Sb Ujvxu E Ho Aeut Star-delta start of the main motors Grooved calibration steel roller Selector switch for positioning the sanding shoe from the control panel Extraction connection Extraction nozzle diameter 2 x 200 mm Electrical data Power of height adjustment motor 0.25 kW Power of feed motor 0.8 kW Power of drive motor 11 kW Connection voltage 400 V Mains frequency 50 Hz Grinding unit Grinding belt length 2150 mm Grinding belt width 1370 mm Grinding width max. 1350 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Height min. 4 mm Height max. 170 mm

Year of construction: 2022, Condition: new, No. 04320 Edge grinding machine VOLPATO LVO 150 T New machine, 100% made in ITALY Year of construction 2022 Immediately available from stock Combined edge sanding machine with multiple work options. Independently motorized belt oscillation, mechanically adjustable up to a maximum stroke of 20 mm. The complete sanding unit can be swiveled up to 45° from the vertical, every angle in between is continuously adjustable. In the basic setting, designed as a 1-station solid sanding machine, it can be converted in a very short time for precise veneer sanding using the veneer edge sanding device included in the scope of delivery. Thanks to the 1-place solution, the machine can also be set up against a wall to save space. The basic equipment includes a 5-part set of grinding wheels (Ø 25-30-35-40-45-50 mm). By using different belt grains, you can achieve different surface finishes and degrees of wood removal. Belt dimensions 2640 mm Abrasive belt width 150 mm Working table 940x460 mm Sanding belt speed 15 m/s Belt drive motor 4 kW Motor for oscillation 0.15 kW Diameter driven roller Ø 75 mm Additional work table 350 x 300 mm Sanding rolls Ø 25 – 30 – 35 – 40 – 45 – 50 Swing stroke 15 mm Diameter dust hood Ø 100 mm Including operating instructions in English Including confirmation of compliance with CE standards Other scope of delivery as shown Terms of delivery: from stock Transport dimensions approx. 1650 x 1100 x 1350 mm LWH Weight approx. 250 kg Visitation on site possible by appointment Technical information, year of construction and scope of delivery according to the manufacturer, without guarantee Dob E Sb Uoia N Nxj Ajut Subject to prior sale The manufacturer's warranty regulations apply to new machines

Condition: good (used), Working width 150 mm You can call or write us. We can speak and write German and Russian. You can also send messages in English Duob E Sb Uopgw Hge Ajt

Condition: excellent (used), WIDE BELT SANDER SCM sandya 7S grinding width 1100 MM 1 unit with metal shaft 2 combi unit with rubber shaft Dujb E Sbewaaznj U Aot pneumatically switched units foot has a rebound-rebound 18.5KW engine, star/delta start two feed speeds electric table adjustment + manual table position display element thickness gauge oscillation on photocells max. grinding height 170mm sanding belt dimensions: 1120 x 2160mm sander in very good condition, ready to work

Condition: ready for operation (used), Grinding width 600 mm First rubber roller Second rubber roller + shoe with manual adjustment 2 conveyor feed speeds Pneumatic oscillation Paper 1520x600 380 V Year of production 2001 Dusbov Nn R Re E Sb U Aet

Condition: excellent (used), machine/vehicle number: 8-033-R552-08, overall weight: 8,000 kg, For sale: Stemas type Lev.P and Lev.P.A - double-sided edge grinding line consisting of two machines. Automatic electronic 6-group edge grinder, for panels, for flat and shaped edges, solid, veneered, unfinished, painted, profiles, funeral coffins, frames and others - CE Standard The machine allows the processing of wooden parts with the following parameters: Minimum and maximum product height: 15 ÷ 100, mm Minimum working width: 200 with a max. length of 700, mm Minimum and maximum working length: 200 ÷ 4000, mm Conveyor speed: 6 ÷ 30, m/min Minimum and maximum milling speed: 800 ÷ 1400, rpm Cutting speed: 3000 ÷ 6000, rpm Maximum allowable pressure: 10, ATM Maximum cutter tool diameter: 200, mm Dusb E Sewbptpjb U Ajt Maximum height of the cutter tool: 110, mm Maximum diameter of the cutting tool: 120, mm Maximum height of the cutting tool: 60, mm Diameter and height of the cutter grip: 30 ÷ 140, mm; 40 ÷ 100, mm

Condition: like new (used), Year of construction: 2017, machine/vehicle number: 0-256-23-1012, Operating hours recorded: 361.69 h Working width: 1350 mm Wide belt width: 1350-1380 mm Wide belt width: H/X 1370 mm Cross belt width: 150 mm Belt change side: left Working height: 900 mm Workpiece thickness: 3-160 mm Feed speed: 2.5-13 m/min Workpiece detection: High-precision workpiece detection with a 12.5 mm pitch; multiple loading of complex parts Units: 1. Cross unit (1350 mm) (T3/5), Continuously variable, frequency-controlled cutting speed 2-16 m/s, MPS 2.0 Plus (1350 mm) electromagnet. Articulated pressure bar Drive motor 13.5 kW 2. X-shaped unit (1350 mm) (T3/5) with internal lamella belt and steel contact roller for mounting an articulated pressure bar with three options: - Calibration sanding with profiled contact roller - Veneer and lacquer sanding without lamella belt - Veneer and lacquer sanding with lamella belt Continuously variable, frequency-controlled cutting speed 2-18 m/s MPS 2.0 Plus (1350 mm) Electromagnetic articulated pressure bar Drive motor 18.5 kW 3. U-shaped unit (1350 mm) (T3/S/7/9) Universal unit for mounting round brushes on interchangeable frames and disc brush cassettes. Terminal controlled adjustment of the brush feed and thus the immersion depth, continuously frequency controlled brush oscillation 36-240 strokes/min. Switchable Rotation direction in either forward or reverse rotation Drive motor 15 kW Cutting speed 130 - 1000 2 carriages for easier changing of brush units on interchangeable frames (service carriage for U-unit) 1 structuring brush, diameter 300 mm 1 satin brush, diameter 300 mm 4th brush unit with structuring brush Drive motor 5.5 kW Brush material: Anderlon K 80 Diameter 150 mm Cleaning system with integrated ionization device with 16 rotating nozzles and suction nozzle Sanding belt dimensions 1370 x 2150 mm Vacuum clamping device 5.5 kW, vacuum blower integrated into the machine Machine control terminal touch screen Additional 2 roller conveyors, each L = 3000 mm, W = 1300 mm Various Sanding belts P24-P100 (approx. 50); extraction piping; mobile sanding belt holder (6 arms) Dusb Eov T Nnfs Sb U Ajt Operating voltage: 400 V, 50 Hz Space requirement: L x W x H: 2566 mm x 2100 mm x 2415 mm Weight: 5500 kg Machine dimensions: 2600 x 2030 x 2000 mm Location: 32683 Barntrup

Condition: used, Year of construction: 2009, No. 04412 Wide belt sander HOUFEK Buldog 5 910 C Year of manufacture 2009, only a few operating hours! Working width 910 mm 1 sanding belt, pneumatic pressure pad 1 cleaning brush, diameter 150 mm NC control with 10.4" touchscreen Sanding belt width 930 mm Sanding height 3 - 160 mm Feed rate 4.9 / 9 m/min Rubber roller diameter 160 mm Sanding belt speed 18 m/s Motor power 11 kW Pneumatics 5.5 bar Automatic table positioner for workpiece height Segmented pneumatic sanding pad, electronically controlled Pneumatic sanding belt oscillation, electronically controlled Dsb E Sor Hnzxjb U Aeut Machine dimensions: 1550 x 2350 x 2550 mm LWH with roller tables 1550 x 1650 x 2550 mm LWH without roller tables Transport dimensions approx. 1650 x 2300 x 2500 mm LWH Weight 1200 kg To avoid possible misunderstandings, an inspection on site is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: excellent (used), Functionality: fully functional, total width: 800 mm, total height: 750 mm, total length: 1,600 mm, working width: 200 mm, grinding width: 200 mm, overall weight: 670 kg, grinding height: 170 mm, working height: 170 mm, type of input current: three-phase, grinding belt width: 200 mm, worktable length: 1,300 mm, worktable width: 200 mm, extraction nozzle diameter: 140 mm, table length: 1,500 mm, table width: 200 mm, type of motor: three-phase motor, MAWEG Pass-Through Grinder Grinding machine after technical inspection. TECHNICAL PARAMETERS: – max. width of the processed element: 200mm – max. height of the processed element: 170mm – 2 grinding units: – metal roller + shoe + metal roller from above – metal roller + shoe + metal roller from below – from above: Djb Eewaza So Sb U Asut 2 pressure rollers, rubber, pulling grinding unit sliding roller, rubber 2 pressure rollers, rubber, pulling from below: – guide bar on the side grinding unit electrically adjustable grinding height: 0.37kW 6 types of feed speeds + right/left: 2.25; 4.5; 9; 12.5; 18; 25m/min feed motor: 0.9kW main motors: 2x4kW extraction nozzle diameter: 140mm -belt width 200mm -belt length 1500mm Machine dimensions - Length: 1600 mm - Width: 800 mm - Height: 750 mm - Weight: 670 kg Where can you see our machines? JBS MASZYNY STOLARSKIE WOLICA DRUGA 26 23-310 MODLIBORZYCE LUBELSKA PROVINCE It is possible to test the machine on site. Possibility of financing the machine through leasing or installments. WE ORGANIZE MACHINE TRANSPORT!

Condition: ready for operation (used), Functionality: fully functional, total length: 1,700 mm, total width: 600 mm, type of input current: three-phase, overall weight: 180 kg, extraction nozzle diameter: 120 mm, worktable width: 200 mm, worktable length: 950 mm, input voltage: 380 V, power: 1.8 kW (2.45 HP), rotational speed (min.): 1,400 rpm, Oscillating edge sander wegoma brand. Tilting main table 950 X 200 mm. End table 400 X 300 mm for shaft work. 150 mm wide belt. The machine is placed on a frame (not visible in the photo) and equiped with 4 lockable wheels. Machine length 1700 mm and 600 wide. HP 3 CV 380v Approximate weight 180 kg. Dujb E Sb Uov Tfbhj Aet

Condition: used, Vertical grinder Baudin Djb E Soh Ab Scsb U Ajut machine sold without startup

Condition: good (used), Year of construction: 1995, Multi-purpose surface sanding machine, paint sanding machine, assembly kit, finishing unit, sanding unit, sanding station, belt sander, belt sander -Max. Sanding belt width: 1350 mm -oscillating -Drive: 11 kW -Speed: frequency controlled -Max. Passage height workpiece: 140 mm - Sanding belt dimensions: 2620 x 1350 mm -Dimensions machine: 221H2310 mm Dujb Ejgnnbvj Sb U Ajt -Weight machine: 4500 kg