Condition: used, Year of construction: 2017, operating hours: 3,500 h, Equipment: Base package AK635 Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive Tyres 385/65 R22.5 Permissible total weight 25,000 kg Hydraulically adjustable support leg Splash guards (inner and side fenders) Mercedes-Benz diesel engine OM502LA, 440 kW at 2,000 rpm, compliant with EUROMOT IIIB emission standard Kjdpfx Asy D Nktjgyelt Load-dependent feed control including automatic scraper floor reversal Separate drives for feed roller and scraper floor (twin drive) Fuel tank 750 litres Feed roller: length 1,690 mm, diameter 510 mm, with mounted toothed segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: flail tip “Streusel” Additional hydraulic connection 20 l/min Centrally arranged wear strips Electric pump for operating cylinder functions (e.g. raise/lower support leg and open/close rear basket, fold/unfold rear conveyor, release drive) when the engine is off 24 V electrical control Separate control box at the rear of the machine Hydraulically folding fine shredding basket with flap (mesh size from 30 - 280 mm, gradation on request) Rear conveyor: belt length 6,150 mm, belt width 1,500 mm, discharge height 4,500 mm, hydraulically foldable, with anti-magnetic centre section Lower conveyor: belt length 1,700 mm, belt width 1,400 mm Scraper floor with 34 slats Radio remote control incl. transmitter, receiver, 230 V charging station, 12/24 V charging cable, transmitter bracket. The following functions can be controlled: engine stop, engine speed +/-, material feed: on/off/reverse, fine shredding basket: open, rear/lower conveyor: on/off, feed roller: reverse, scraper floor stop/reverse/forward, support leg: raise/lower, drive preparation: stop/reverse/forward/release Drive preparation Acoustic start-up warning Paint finish: RAL2011 deep orange Fine shredding basket 60 mm Optional equipment: Impact plate with impact bar Overband magnet -Neodymium- Frame for overband magnet Smooth feed roller Scraper floor with cleaning holes Delivery date to be agreed

Condition: used, Year of construction: 2019, operating hours: 6,725 h, Equipment: Base version DW 3060-F "Büffel" Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting in accordance with EC directive 50 mm EC towing eye incl. slip-on shoe Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with EUROMOT IV emission standard Auxiliary hydraulic connection 20 l/min Hydraulic pre-equipment for traction drive Fuel tank 2 x 300 litres Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) – Size L (174 mm, armored) Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Discharge conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24V electrical control system Roller reversal via electric motor when engine is stationary Automatically reversible cooling fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL 2011 deep orange Optional equipment: Hydraulic traction drive Auxiliary hydraulic connection 70 l/min Radio remote control Overband magnet for rear conveyor Frame for overband magnet Moistening system Kedpfxoy D Nice Agyjlt Delivery date upon agreement

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, filling opening width: 700 mm, filling opening length: 960 mm, Untha RS 50 Shredder Power: 37 kW / 380 V 50 Hz Electrical cabinet – Siemens Simatic S7 Chamber dimensions: 960x700 mm New knives: 310/2Z and 270/8Z Quick-change screen system. Weight approx. 3,200 kg. Kljdpfx Ajy R Egqsgyot Machine is fully operational and ready for use. Serviced by the manufacturer. Price on request. More photos and a video of operation available on request. For further information, please call.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,860 h, functionality: fully functional, machine/vehicle number: 3155220747, overall weight: 458 kg, rotor diameter: 300 mm, number of blades: 5, total length: 1,130 mm, total height: 1,570 mm, total width: 1,000 mm, power: 6.1 kW (8.29 HP), type of input current: three-phase, input voltage: 380 V, blade width: 300 mm, Equipment: documentation/manual, The compact SINCRO 315 EKO granulator is designed for recycling rigid and flexible cables. By shredding and subsequently dry-separating the material, it effectively separates copper and aluminum from insulation (such as plastic, rubber, or paper). The machine can be fed either manually or automatically by adding a conveyor belt, according to user requirements. The SINCRO 315 EKO cable shredder is fully soundproofed and consists of the following components: - Granulator with three rotary and two fixed adjustable knives, as well as a screen perfectly matched to the granulator. - Control panel with an intuitive arrangement of control buttons. - Adjustable, easily accessible vibratory dry separator. - Two completely independent air circuits, which reduce maintenance needs and enhance the sorting process. Performance: - Up to 130 kg of input material per hour, depending on the type and size of the processed material and screen. Klodpfxsy Sh Dbs Agyet - Combining it with a PMG pre-shredder increases throughput and reduces component wear, as ferrous parts are separated using a magnet installed on the conveyor, also reducing labor requirements. Processes unshredded cables: - Flexible copper cables up to Ø22–25 mm - Rigid copper cables up to Ø20–22 mm - Aluminum cables up to Ø20–25 mm Your benefits: - Best price/performance ratio - Quick return on investment - Machine retains high resale value - Compact, ideal solution for limited spaces - Environmentally friendly with low energy consumption and low noise - Capable of recycling a wide range of materials - Easy operation and maintenance

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, power: 375.1 kW (509.99 HP), year of last overhaul: 2026, Mobile shredder DOPPSTADT AK 535 compact Fine shredding basket; hole-size can be agreed. Foldable discharge conveyor with magnetic head pulley (magnet roll) Twin-drive (separate drives for infeed roller and scraper floor) Hydraulically self propelled drive (for moving on site) Kodpfx Agoy A Iv Eeyslt Radio remote control

Condition: new, Year of construction: 2023, High Class Shredder KS 1000/2 Technical Data: Propulsion: 2x 15kW Motors Revolutions: 16,5 RpM at 7269 NM Cutting width: 1000 mm Blade width: 19 mm Kodpoft U Sajfx Agyelt Dimensions: 1700 x 2400 x 2550 mm Advantage of double motor drive: Constant torque on both shafts Areas of Application: Industrial waste: Metal Cans & Buckets, Plastics, Wood Production waste: Cartons, Paper, Rubber Electronic waste: Cable, Cable Remains, Small Electronic Devices Other waste: Food, Leftovers, Biowaste, Wood, Glas, Ceramic, Porcelain

Condition: new, Year of construction: 2023, Details of the Two Shaft Shredder KS 1000/2 Engine: 2x 15kW Engine speed: 16,5 U/min - 7269NM Kodpfod Sblmex Agyslt Blade Strength: 19mm Working width: 1000mm

Condition: good (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, power: 30 kW (40.79 HP), rotor width: 1,000 mm, 2-shaft shredder KS-1000/2 Klodpfxeyrfgrj Agyet Excellent condition Approx. 450 operating hours. Rotor knives are slightly rusty due to wet material, but their overall condition is still very good! Refurbished condition: – New paintwork Includes: control cabinet, frame & hopper

Condition: used, machine/vehicle number: 13210, Rotor diameter: 750 mm Rotor width: 1500 mm Rotor knives: 76 Stator knives: 4 (1 row) Feed opening approx. 1500 x 1500 mm Drive motor: 2 x 75 kW Kedpfx Agey Di R Toyelt The photos shown here do not reflect the current condition of the machine!

Condition: good (used), Year of construction: 1995, shredding by 3 HARDOX-coils (spirals) diameter x length: approx. 500 x 1.700 mm opening: approx. 1.100 x 1.700 mm new base frame with steel construction Klodel I Dx Nspfx Agyst new feed-hopper 8 m³ new control cabinet incl. 7 unused spare coils

Condition: excellent (used), Year of construction: 2009, operating hours: 10,720 h, functionality: fully functional, Willibald EP 5500 Shark in excellent condition and ready for work. Klodpfoy Iwgksx Agyst

Condition: used, Year of construction: 2014, operating hours: 7,400 h, functionality: fully functional, BRAND: WILLIBALD MODEL: EP5500 YEAR: 2014 HOURS: 7,400 EXTRAS: 48 hammers Ksdpfx Agjy Iwa Royjlt SERIAL NUMBER: #134 REGISTRATION NUMBER: 98.14.XX-552

Condition: used, machine/vehicle number: 13398, Rotor diameter: 300 mm Rotor width: 1400 mm Rotor knives: 76 / 114 Stator knives: 1 row Infeed opening approx. 1400 x 1050 mm Kljdpfoyr Tx Aex Agyot Drive motor: 2 x 30 kW

Condition: used, machine/vehicle number: 13289, Rotor diameter: 450 mm Rotor width: 1500 mm Rotor knives: 136 Stator knives: 2 x 5 pcs Infeed opening approx. 1500 x 1500 mm Drive motor: 60 kW The machine currently does not match the picture, as it is being overhauled. Kledpoyr Tw Eefx Agyst

Condition: used, machine/vehicle number: 13299, Rotor diameter: 750 mm Rotor width: 1500 mm Rotor blades: 76 Kjdpfx Ajyr Twrjgyjlt Stator blades: 1 row Inlet cross-section approx. 1500 x 1500 mm Drive motor: 2 x 45 kW

Condition: new, Dimensions with base frame: approx. 1500 mm x 1400 mm Feed speed: 27 m/min Rotor blades: 2 Stator blades: 1 Infeed cross-section: approx. 10 x 40 mm Ksdjyr Tu Rjpfx Agyjlt Drive motor: 1.5 kW Weight with base frame = approx. 270 kg

Condition: used, machine/vehicle number: 13187, Rotor diameter: 400 mm Rotor width: 1100 mm Rotor blades: 54 Ksdpfx Agoyr Tudoyjlt Stator blade rows: 1 Inlet cross-section approx. 1100 x 1500 mm Drive motor: 37 kW

Condition: used, machine/vehicle number: 13063, Rotor diameter: 350 mm Klsdpfx Agoyr Tttsyet Rotor width: 1200 mm Rotor blade: 66 Stator knives: 1 row Inlet cross-section approx. 1100 x 1200 Drive motor: 55 kW

Condition: new, machine/vehicle number: 12007, Technical data: Cutting area: 700 x 1300 mm Number of cutting discs: 18 Cutting disc width: 65 mm Scrapers: 2 Klsdpfxjyr Tpuo Agyjt Drive power: 2x 15 kW, 400 V, 50 Hz Weight: 2900 kg

Condition: new, The AMIS twin-shaft shredder is equipped with a CNC-manufactured, heavy-duty grinding chamber that is fully bolted for easy maintenance. Both the machine housing and the bearings are protected by wear rings and plates. The geared motors drive the two hexagonal working shafts, which can be fitted with various interchangeable cutting discs. The two working shafts are mounted in large-sized SKF spherical roller bearings with lifetime lubrication. Optionally, an automatic, battery-powered continuous lubrication system for the main bearings can be installed. Special features The change of wear plates and scrapers does not require disassembly of the machine housing. Ksdpjyr Tlpjfx Agyelt Thanks to the horizontally split bearing plates, the rotors including the bearings can be inserted or removed from above in a very short time. This allows for quick and easy rotor changes with different cutting tools. The size of the grinding chamber can be modified with relatively little effort due to the bolted housing design. Motor configuration, gearbox size, installation position, and rotor speed can all be adjusted as required. Technical Data Cutting chamber: 600 x 1200 mm Number of cutting discs: 60 (made of Hardox) Cutting disc width: 19 mm Maximum cutting disc diameter: 295 mm Scrapers: 2 Drive power: 2x 15 kW, 400 V, 50 Hz Weight: 2,800 kg Electrical control The machine is operated via a modern Siemens S 7/1200 controller featuring an advanced 7-inch touchscreen display. Both geared motors are controlled depending on load, and feature a reversing operation. Three different control programs are available depending on the material and application. Options The machine can be tailored for a wide range of applications to meet customer requirements. A variety of options are available: Customized base frames Special hoppers Grinding unit with different tools/cutting discs (diameter, size, thickness, shape, material grade) Various drive power ratings Different gearbox sizes with variable speeds

Condition: new, The Zerma ZCS shredder combines leading shredder and granulator technology in a single, compact unit. By developing the combination of shredder and granulator, ZERMA has successfully expanded its product portfolio. Through the interplay of the proven design and high torque of the single-shaft shredder with a highly efficient granulator, ZERMA is able to deliver a reliable and compact pre-shredding system. Kledpfx Aeyr Tg Tegyjt The shredder and granulator are driven separately, providing better process control throughout. To further improve efficiency, the ZERMA Smart Drive System is used to constantly monitor the load and adjust the current accordingly, resulting in reduced power consumption. The ZERMA ZCS can be used in any application where consistent quality in shredding and granulating is required. Typical applications include, but are not limited to, the following: Injection molding Thermoforming Blow molding Recycling Extrusion Waste

Condition: new, The solution for shredding large, long pipes and profiles. The ZRS series has been specifically developed for shredding pipes with diameters of up to 1,300 mm, made from various materials such as PE, PP, and PVC. These machines can shred plastic pipes up to 9 meters in length directly, without the need for prior cutting or sawing. The core components are rotors with diameters of up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently shred the material at low rotational speeds. Ksdpfx Ajyr Tg Hegyslt The pipe is loaded into an enclosed feed trough, where a hydraulic pusher presses it against the rotor. The pre-shredded material is then conveyed via a belt to a granulator, which processes it into granulate suitable for immediate use. The entire system is operated automatically via a central control unit. Additional advantages of the system include low energy consumption, the avoidance of power peaks, and reduced risk of accidents during pre-shredding.

Condition: new, General: Kodpfxeyr Tf No Agyelt The single-shaft shredders of the ZTS/ZTTS series have been specifically developed for the shredding of whole or pre-shredded tires. Both ZTS and ZTTS shredders feature a large rotor diameter of 760 mm and working widths ranging from 1,500 to 3,000 mm. Both types come equipped with oversized, external bearings and dual drives. The tangential infeed ensures optimal feeding of input material without the need for an additional hydraulic pusher. All tire shredders are fitted with special wear protection in all relevant machine areas. The main differences between ZTS and ZTTS models are the number of stator knife rows and the type of screen perforation used. Applications: Machines of the ZTS series feature a single stator knife row and are therefore utilized for the first stage of pre-shredding car tires or other large, solid pieces to a final particle size of approximately 150 mm. For the second stage, a ZTTS shredder is used to further reduce the material to about 20 mm. The intelligent machine design, combined with the adjustable knife clearance, enables optimal separation of rubber and steel fractions. In an additional step, the steel content can be separated using a powerful magnetic separator.

Condition: new, ZXS 1500 – 2x75kW – Working cross-section: 1500 x 1490 mm ZXS 2000 – 2x90kW – Working cross-section: 1500 x 1900 mm ZXS 3000 – 2x110kW – Working cross-section: 1500 x 2700 mm ZXS Series: The single-shaft shredder for demanding shredding tasks. The machines are built extremely robust and deliver high throughput rates. Working widths from 1500 to 3000 mm and a rotor diameter of 750 mm are available as standard. Ksdpsyr Tf Ajfx Agyolt Wide range of applications for the ZXS series: Many other materials can be shredded and prepared for recycling with the ZXS series, such as old cables, PET bottles, paper and cardboard, etc. Let us advise you on how your material can be shredded and recycled.

Condition: new, GENERAL INFORMATION The ZIS series single-shaft shredders are characterized by their spacious cutting chambers, which owe their stability to a robust steel-welded construction. The rotor diameter is generously dimensioned at 457 mm. Rotor widths are available in 1200, 1500, and 2000 mm. The ZIS series retains all benefits of the ZSS series: drive via an oversized gearbox, reversible blades, bolted blade holders, durable externally mounted bearings, hydraulic screen cradle, easy handling, and technically advanced control systems. APPLICATIONS The ZIS series was primarily developed for large-volume hollow bodies such as IBCs, waste bins, pallets, rain barrels, etc. Additionally, the machine can be universally used for countless applications in the plastics and wood industries. Like all Zerma shredders, machines of the ZIS series can also be equipped with various wear protection options. ADVANTAGES Klodpoyr I I Sofx Agyot 35% larger cutting chamber volume compared to the ZSS series Internally positioned hydraulic ram Increased ram speed in the return stroke Compact dimensions Blade holders bolted into rotor pockets