Condition: used, Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Godpfxjxx Tige Amyobl Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: used, Year of construction: 2022, operating hours: 3,000 h, functionality: fully functional, Basic package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally positioned wear/slide strips 24-V electric control system – additional electric pump enables the following functions with engine off: raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Gjdpfx Amoxx N T Isyobl Service-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan wheel Three-sided load protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Painting: RAL2011 deep orange Optional equipment: Driveline 310 kW – EV 3-axle drawbar chassis unit Shredding system Size L-C3 600/4-30Z Size L limiter Auxiliary hydraulic connections 35 – 80 l/min Hydrostatic drive Hopper extension 350 mm, left-side watering Rear conveyor 7 m Overband magnet Neodymium Frame for 7 m overband magnet Central lubrication system Custom paint finish in RAL Delivery date to be arranged

Condition: used, Year of construction: 2022, operating hours: 1,150 h, functionality: fully functional, Basic package Inventhor 6: - Load-sensing system - Fuel tank 500 liters - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged wear strips - 24V electrical control system – additional electric pump for actuating the following functions when the engine is off: - Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GRP service doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system Gbsdpfxsxx N Dgj Amyol - Paint finish: RAL2011 deep orange Additional equipment: - Driveline 260 kW – EV - 2-axle semi-trailer chassis unit - Size L shredding system – 20 teeth - Size L limiter - Additional hydraulic ports 35–80 l/min - Hydraulic travel drive - Hopper extension 350 mm, watering system both sides - Hopper wedge Size L with NM brush - Rear conveyor 7 m - Overband magnet neodymium - Frame for 7 m overband magnet Delivery date by arrangement

Condition: used, Year of construction: 2002, Single shaft shredder with hydraulic pusher Gjdpeyi Ticefx Amyebl Weima WLK6S Main motor: 37 kW Rotor length: 800 mm Rotor diameter: around 380 mm Rotor knives size: 40x40x23 mm The machine is in very good technical condition, ready for further work.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, power: 261 kW (354.86 HP), Lindner Urraco U75 D on wheel axle with magnet and remote control, fully refurbished. Tools: 6-piece set, 7/7 discs in Hammel design (condition: 85%) Total operating hours: 9800. Gjdpeytdkfofx Amyebl 2024: New gearbox, new hydraulic pump, new hydraulic motors installed, now approx. 600 operating hours. Discharge conveyor overhauled, magnet unit replaced. Tools 85%. Service newly performed. New paintwork. Immediately ready for use.

Condition: new, Year of construction: 2026, operating hours: 5 h, Equipment: AdBlue, Arjes Impaktor 250 EVO II Shredder – Ideal for construction debris, concrete, bulky materials, asphalt, roofing felt, wood, mixed waste, biomass, rubber, plastic, ceramics, photovoltaic panels, and other materials. The basic machine price includes (already contained): - Complete shaft set with bearing cassette of choice (for concrete, wood, biomass, mixed waste, others) Gjdpjyf Ni Dsfx Amysbl - Sprinklers for dust reduction - Cross-belt permanent magnet (separates steel elements to the side) - Side discharge hopper under the magnet - Shaping bars

Condition: like new (used), Year of construction: 2005, operating hours: 20,000 h, warranty duration: 24 months, rotor diameter: 500 mm, rotational speed (max.): 165 rpm, year of last overhaul: 2024, MAQUINA COMPLETAMENTE RECONSTRUIDA // MACHINE FULLY REFURBISHED Longitud de entrada // Intake length: 1250 mm Anchura de entrada // Intake width: 2962 mm Longitud de rotor // Rotor length: 2962 mm diam. rotor // rotor diam.: 500 mm nº de rotores // nº of rotors: 2 off n.º de cuchillas // n. of knives: 2x27 (80x80) velocidad del rotor 1 // rotor 1 speed: 95 rpm velocidad del rotor 2 // rotor 2 speed: 75 rpm potencia motor 1 // main motor 1 power: 75 kW potencia motor 2 // main motor 2 power: 55 kW voltaje // voltage: 400 V frecuencia // frequency: 50 Hz Peso de la máquina // machine weight: 16000 kg * Máquina completamente reconstruida (rotor y contracuchilla completamente recargado); 1 año de garantía ó 2000h, lo que antes suceda * Incluye: - Soporte de máquina - NUEVO Godog D Ulljpfx Amysbl - Tolva de alimentación - NUEVO - Cuadro de control eléctrico - NUEVO - Planos de implantación disponibles - Manual de instrucciones & esquemas eléctricos Includes: - Machine fully refurbished (included complete hard facing of rotor); 1 year guarantee or 2000h, whatever happens first - Machine specially designed for shredding of plastic waste. - Electric control pannel - NEW - Steel support for the machine - NEW - Infeed funnel for the machine - NEW - Dimmensional drawings available in Acad for the machine - Operation & maintennance mannuals available

Condition: used, Technical details: drive motor: 4 kW revolution per minute: 14 U/min voltage: 380 V / Hz weight: ca. 0,5 t Chip Crusher - Shredder 2-shaft crusher current feed size 400 x 360mm crushing tools 8 pieces per shaft current drop-out size L: 350 x W: 250mm Gbedeu Nxrpspfx Amyel gear motor manufacturer Vector accessories: 2 crusher discs *

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 12298 010, overall weight: 5,000 kg, rotor diameter: 370 mm, number of blades: 60, total length: 3,186 mm, total height: 3,500 mm, total width: 2,900 mm, rotor length: 1,305 mm, power: 63 kW (85.66 HP), rotational speed (max.): 145 rpm, year of last overhaul: 2025, This machine was set up & designed to shred carpet & carpet tiles. It is water cooled & comes complete with a chiller and blower. Gbodpfoxuwtujx Amyjl

Condition: reconditioned (used), Year of construction: 2008, power: 250 kW (339.91 HP), Mobile shredder ARJES VZ 750 E Godexf Aqtopfx Amyobl Electric drive: 250 kW Discharge conveyor Overband magnet

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, power: 564.86 kW (767.99 HP), VOLVO diesel engine: 768 HP Tilting hopper Lift-axle Discharge conveyor with overband magnet Gsdpfx Amotpqcheyjbl Radio remote control

Condition: reconditioned (used), Year of construction: 2006, power: 320 kW (435.08 HP), Stationary shredder LINDNER JUPITER 3200 Electric drive: 2x 160 kW Gbjdpfx Amowg Ev Deysl Powerbelts new. Incl. hydraulic aggregate, electric control cabinet.

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, power: 389.81 kW (529.99 HP), Mobile shredder DOPPSTADT AK 560 Eco Power Diesel engine: 530 HP Fine shredding basket (hole size can be agreed) Rear discharge conveyor with magnet roll (magnetic head pulley) Twin drive (separate drives for scraper floor and infeed roller) Gedsw Rz Rqepfx Amyobl Hydr. self propelled drive (for moving on site) Radio remote control

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Overbandmagnet for LINDNER URRACO 95. Gbjdpfxjxur Itj Amysl Measurements: Total length: 270 cm, Width of the rubber belt: 110 cm

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, power: 405.26 kW (551.00 HP), Mobile shredder on crawler chassis. Diesel engine: 551 HP Folding discharge conveyor Gjdpfeu R Uaxsx Amyjbl Overbelt magnet (neodymium) Radio remote control Detailed description: see pdf-file

Condition: excellent (used), Year of construction: 2014, Diesel engine: 430 HP Gedpfx Aji Trvbemyobl Rear duscharge conveyor Overband magnet Hydr. self-propelled drive (for moving on site) Radio remote control We can also offer financing if required.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 257.42 kW (349.99 HP), Mobile shredder LINDNER MIURA 1500. Gbjdpou Di Azjfx Amyjl Foldable discharge conveyor. Radio remote control.

Condition: like new (used), Year of construction: 2021, power: 264 kW (358.94 HP), Electric engine: 264 kW Gsdpswnq Disfx Amyjbl Equipped with: Discharge conveyor, overband magnet, radio remote control.

Condition: excellent (used), Year of construction: 2022, operating hours: 135 h, functionality: fully functional, overall weight: 24,740 kg, transport width: 2,540 mm, transport length: 9,141 mm, transport height: 3,604 mm, power: 260 kW (353.50 HP), Equipment: Basic package Inventhor Type 6 - Load-sensing system - 500-liter fuel tank - Longitudinal discharge conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged lubrication strips - 24V electrical control system – additional electric pump for the following functions when the engine is off: "Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" - Complete radio remote control - Large side GRP maintenance doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear Gbedpfxsxd T Hcs Amyel - Hydraulically reversible fan wheel - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Audible start-up warning - Doppstadt telematics system - Paintwork: RAL2011 deep orange Optional equipment: - 260 kW drive train – electric variant - 3-axle drawbar chassis unit - Shredding system size L – 20 teeth - Size L limiter - Additional hydraulic connections 35–80 l/min - Hydraulic travel drive - 350 mm hopper extension, water spray system on both sides - 7 m rear discharge conveyor - Neodymium overband magnet - 7 m frame for overband magnet Delivery date to be agreed upon

Condition: ready for operation (used), Year of construction: 2014, total length: 2,100 mm, total width: 1,500 mm, total height: 2,700 mm, overall weight: 2,500 kg, power: 15 kW (20.39 HP), input voltage: 380 V, Rotary pre-shredder, twin-shaft – Mercodor ZM52, 20 HP – available with discharge conveyor and magnetic plate – automatic reversal in case of blockage – cutting chamber 800 x 600 mm – blade thickness 30 mm – hopper 1300 x 1100 mm – optional pusher or ram for hollow bodies – 2 tons – loading onto truck at our expense – machine of very high quality, extremely robust, highly versatile and powerful; capable of shredding waste such as tires, copper cables, animal bones, glass bottles, purges, plaster, drywall (BA13), e-scrap, plastics, wood, bumpers, drums, metals, organic material for biogas, etc. Ideal for copper recycling, also usable for document destruction or volume reduction of bulky waste. Option to fit a 12mm secondary shredder. Price for the lot. Godpfx Ameyn Rf Eoysbl

Condition: as good as new (ex-display), Year of construction: 2024, Special-purpose machine for plastics shredding Base machine from €24,990 net Ideally suited for shredding: - Paper, cardboard, pipes, profiles, boxes, canisters, buckets, cans, wooden pallet offcuts, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Included: - Special rotor with embedded knives (reduced load uptake) - Minimal cutting gap between rotor and counter knives Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Control: PLC Cutting chamber opening at the top: 600 x 800 mm Maximum recommended input material size: approx. 500 x 500 mm (*height less critical) Hydraulically actuated pusher Screen perforation options: 25 - 40 mm For plastics, coarser screens are recommended (30-40 mm) *For finer granulation, a two-stage shredding process with downstream granulator type MVZ (screens 5-15 mm) is recommended Exhaust port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Additional options available at extra charge: - Raise shredder by approx. 25 cm (preparation for conveyor discharge): + €1,980 net Gjdpfx Amed H R Sxoyjbl - Inclined conveyor belt (discharge height approx. 220 cm): + €8,770 net - Overbelt magnet: + €5,980 net - Conveyor and overbelt magnet control: + €2,750 net (synchronized start/stop with shredder) - Alternatively, manual start/stop function at conveyor: + €595 net Raw material requirements: - Moisture content (atro) must be below 25% - Metals and mineral contaminants such as sand, stones, etc. will result in increased wear We are happy to offer a free test using your material at our facility in Neckartailfingen. Alternatively, you may send your material to us via freight forwarder and we will document the test using photos and videos. --- * Only for brittle plastics of medium hardness. * Not suitable for elastic or extremely hard and heavy plastics – this will negatively impact the durability of the system. --- Optional: Larger machine sizes available Base machine: Shredder MGZ 830 K-S – 18.5 kW Cutting chamber opening at the top: 800 x 1,000 mm Maximum recommended input material size: approx. 720 x 700 mm (*height less critical) From €39,995 net (*options subject to additional cost) Base machine: Shredder MGZ 1030 K-S – 22 kW Cutting chamber opening at the top: 1,000 x 1,000 mm Maximum recommended input material size: approx. 900 x 700 mm (*height less critical) From €49,975 net (*options subject to additional cost) Base machine: Shredder MGZ 1330 K-S – 37 kW Cutting chamber opening at the top: 1,300 x 1,200 mm Maximum recommended input material size: approx. 1,200 x 700 mm (*height less critical) From €79,975 net (*options subject to additional cost)

Condition: used, Year of construction: 2011, functionality: fully functional, Shredder Höcker PHSS 40/110 Technical data: Manufacturer: Höcker Polytechnik Model: PHSS 40/110 Year of manufacture: 2011 Drive power: 22 kW Working width: 1100 mm Rotor diameter: 400 mm Cutting principle: High-speed shredder shaft with counter comb Remarks: Gedpfjx Uz Npjx Amyjbl The machine is in fully functional condition. It has been inspected and tested at our facility in 28816 Stuhr. A video is available on our website or YouTube channel. Viewings can be arranged at any time by appointment. Upon request, we are also happy to carry out test runs with your own material for a handling fee. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday, 08:00 to 14:00, and on Friday from 08:00 to 13:00. Please note: All technical data are based on information provided by the manufacturer. We do not accept liability for the accuracy of this information or for any possible errors. Offers are subject to change, prior sale, and revocation at any time. Inspections are possible by arrangement. The sale is ex location, without warranty or guarantee.

Condition: good (used), “Rentec Dinosaurus 2600S” for Sale Manufacturer: Rentec Type: Dinosaurus 2600 S Included Hydraulic-unit and control-unit build in container. With overhauled rotors. Also outlet conveyor in stock which fits to the Rentec Dinosaurs 2600S. Gedpfx Amjvt Tptsysbl See PDF-file below for more detailed information.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 25,000 h, functionality: fully functional, Longitud de entrada // Intake length: 2200 mm Anchura de entrada // Intake width: 2000 mm Longitud de rotor // Rotor length: 2000 mm diam. rotor // rotor diam.: 495 mm n.º de cuchillas // n. of knives: 56 (60x60) velocidad del rotor // rotor speed: 125 rpm potencia motor // main motor power: 132 kW voltaje // voltage: 400 V frecuencia // frequency: 50 Hz Peso de la máquina // machine weight: 14000 kg * Máquina especialmente diseñada para la trituración de plásticos, los rodamientos del rotor están completamente aislados. * Máquina completamente reconstruida; 1 año de garantía ó 2000h, lo que antes suceda * Incluye: - Rotor de repuesto - Sujetador superior; ideal para la trituración de residuos voluminosos de baja densidad - Soporte de acero - Tolva de alimentación - Cuadro de control eléctrico - Planos de implantación disponibles, asi como plano de soporte de máquina y tolva de alimentación - Manual de instrucciones & esquemas eléctricos Includes: - Machine supplied with bridge breaker (upper feeder); suitable to shredd bulky waste with low density - Machine fully refurbished; 1 year guarantee or 2000h, whatever happens first Gbodei Elylspfx Amyjl - Machine specially designed for shredding of plastic waste. - Steel support - Infeed funnel - Electric control pannel - Dimmensional drawings available in Acad for the machine, funnel and steel support - Operation & maintennace mannuals available

Condition: used, Year of construction: 2018, rotor diameter: 368 mm, rotor width: 1,500 mm, No. 10027 Single-shaft shredder AMIS / WEIMA WT 15 Used, year of construction 2018, approx. 250 operating hours According to our customer, the machine is fully functional and can be viewed and tested on site Single-shaft shredder for cables, plastics & recycling Feed opening 1500 x 1160 mm LW Rotor width 1500 mm Rotor diameter 368 mm Rotor speed approx. 90 rpm Motor output 90 kW Throughput capacity approx. 5 tons per hour (depending on material) System output 99 kW Power consumption 210 A Voltage 400 V / 50 Hz PLC control Siemens SIMATIC Built-in screen with 20 mm screen hole diameter Replacement screen with 50 mm screen hole diameter The high-performance shredder in the WT series is ideal for processing a wide variety of plastics - especially difficult, flexible materials such as films, filaments, big bags, tapes, carpets, textiles, foams and all loose and non-bulky waste materials. The WING-RAM swing arm ensures that even contaminated or moist material is fed safely. Incl. angled conveyor belt / discharge belt AMIS FB 7000 x 1500 x 580 / year of construction 2018 / 1.5 kW Incl. magnetic separator AMIS Installation dimensions approx. 9000 x 3500 x 3950 mm LWH Transport dimensions single-shaft shredder approx. 3000 x 2700 x 3200 mm LWH Weight approx. 12500 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, transport and loading by us optionally possible Errors in description and price excepted Gedpfx Amsxwdiueysbl To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location