Condition: used, - 50 HP rotor motor Itodpjwtzrbsfx Ag Sjp - 18' x 22''outfeed belt conveyor

Condition: used, Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Itjdpjxx Tigefx Ag Sjp Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: used, Year of construction: 2016, operating hours: 816 h, 2016 | Dücker HM 160 Wood Chipper | Used Shredder | 816 hours 📍Location: Germany, Rheine 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 14400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 13 inspection points 13 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: 📄 Want to see the full inspection, extra photos, or a video? Iedpfxoxxnb Dj Ag Setp Tip: The reference "39536 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, power: 200 kW (271.92 HP), Boost your waste wood processing efficiency with this Komptech CRAMBO 5200 E direct, a robust industrial shredder renowned for its high throughput and reliability. Manufactured in 2016 and in used condition, this model features a powerful electric drive, delivering consistent performance with low operating costs and noise levels. The integrated Multistar 2-SE star screen ensures precise material separation, complemented by a swivel conveyor and overband magnet for enhanced sorting and metal removal. Complete with control cabinets, this shredder is ideal for operations seeking advanced processing capabilities and maximum productivity. Don’t miss the opportunity to upgrade your plant with this proven solution from Komptech. Ijdpfx Ajxv Acqjg Sjtp

Condition: used, Year of construction: 2011, functionality: fully functional, Höcker shredder PHSS 40/110 Technical data: Manufacturer: Höcker Polytechnik Type: PHSS 40/110 Year of construction: 2011 Drive power: 22 kW Working width: 1100 mm Rotor diameter: 400 mm Cutting principle: high-speed shredder shaft with counter comb Remark: Ijdpfew Rcq Sjx Ag Sotp The machine is in working condition. It has been checked and tested by us in 28816 Stuhr. You can find the video on our website or YouTube channel. Viewings are possible at any time by appointment. We are also happy to carry out tests with your material on request for a fee. We are also happy to answer questions about the machine by telephone from Monday to Thursday from 08:00 to 14:00. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale and revocable at any time. Viewings are possible by arrangement. The sale is ex works, without guarantee or warranty.

Condition: used, Year of construction: 2018, No. 10027 Single-shaft shredder AMIS / WEIMA WT 15 Used, year of construction 2018, approx. 250 operating hours According to our customer, the machine is fully functional and can be viewed and tested on site Single-shaft shredder for cables, plastics & recycling Feed opening 1500 x 1160 mm LW Rotor width 1500 mm Rotor diameter 368 mm Rotor speed approx. 90 rpm Motor output 90 kW System output 99 kW Power consumption 210 A Voltage 400 V / 50 Hz PLC control Siemens SIMATIC The high-performance shredder in the WT series is ideal for processing a wide variety of plastics - especially difficult, flexible materials such as films, filaments, big bags, tapes, carpets, textiles, foams and all loose and non-bulky waste materials. The WING-RAM swing arm ensures that even contaminated or moist material is fed safely. Incl. angled conveyor belt / discharge belt AMIS FB 7000 x 1500 x 580 / year of construction 2018 / 1.5 kW Incl. magnetic separator AMIS Installation dimensions approx. 9000 x 3500 x 3950 mm LWH Transport dimensions single-shaft shredder approx. 3000 x 2700 x 3200 mm LWH Weight approx. 12500 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, transport and loading by us optionally possible Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Itjdpfx Ajxwdiueg Sep Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Year of construction: 2010, total length: 1,750 mm, total height: 1,660 mm, total width: 1,500 mm, Price: On request - Year: 2010 - Documentation available: No - CE marking present: Yes - Serial number: 0509 - Rotor width [mm]: 630 - Number of shafts [pcs.]: 1 - Opening width [mm]: 810 - Opening length [mm]: 630 - Sieve perforation [mm]: 20 - Number of rotating knives [pcs.]: 28 - Transport dimensions: 1750mm x 1500mm x 1660mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Itjdsxixitspfx Ag Sop Yorick Diebels

Condition: used, Year of construction: 2017, operating hours: 6,777 h, functionality: fully functional, Basic version DW 3060-F “Buffalo” (Carrier Machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive 50 mm EC towing eye incl. mounting bracket Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, complies with EUROMOT IV emission standard Reinforced planetary gear 380 kW Additional hydraulic connection 20 l/min Hydraulic preparation for drive system Fuel tank 2 x 300 litres Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic centre section Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electrical control system Roller reverse function via electric motor when engine is at standstill Itjdpfsxx Tfzjx Ag Sjp Automatically reversing fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional equipment: Hydraulic drive system SHREDDING SYSTEM SIZE “L” 600/4 COMPLETE Additional hydraulic connection 70 l/min Radio remote control Comb extension Size “L” Limiter Mounting for comb extension Limiter Size “L” Overband magnet for rear conveyor Frame for overband magnet Spraying system

Condition: good (used), functionality: fully functional, SHREDDER Type Hammel 850 E Iodpfexvhahex Ag Setp - 2 x 110 kW - with outlet conveyor and magnet - with new belts for outlet conveyor and magnet - rotor length 1 900 mm

Condition: good (used), Year of construction: 2018, operating hours: 1,011 h, functionality: fully functional, Single-shaft shredder GROSS, Model GAZ 82 S, Year of manufacture: 2018 Technical data: Manufacturer: GROSS Apparatebau Model: GAZ 82 S Year of construction: 2018 Operating hours: 1,011 Drive power: 37 kW Feed opening: 800 x 1,200 mm Hopper capacity: 1 m³ Rotor diameter: 368 mm Rotor length: 800 mm Rotor speed: 60–120 rpm Extraction port diameter: 200 mm Dimensions: approx. 2,100 x 1,700 x 1,750 mm (LxWxH) Weight: approx. 2,500 kg Materials: Wood, cardboard, plastic Accessories: Hopper Remarks: The shredder is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. The video is available on our website or YouTube channel. Inspections, including under power, are possible at any time by appointment. On request, we also carry out test runs with your material for a handling fee. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday, 8:00 a.m. to 2:00 p.m. On Fridays, we are available from 8:00 a.m. to 1:00 p.m. Itedpfx Aew Rcr Neg Sop Please note: All technical data is based on manufacturer information. We accept no liability for the accuracy of the information provided or for any possible errors. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections can be arranged by appointment. Sale is ex works, prepaid, without warranty or guarantee.

Condition: used, Year of construction: 2022, operating hours: 2,380 h, functionality: fully functional, Base package AK 315: Central axle trailer chassis with 2 axles, road approval for 80 km/h Braking system incl. EBS and lighting according to EU directive Tyres: 385/65 R22.5 50 mm EU drawbar eye including slip-on shoe Hydraulically adjustable support leg Splash guard (internal and lateral mudguards) Permissible total weight: 16,000 kg MTU diesel engine 6R 1000, 230 kW at 2,200 rpm, complies with EUROMOT V emissions standard Load-dependent feed control incl. automatic scraper floor reversal Hydraulically folding green waste grid basket with rear tailgate Impact plate with teeth Fuel tank: 300 litres Feed roller: Length 1,420 mm, diameter 510 mm, with mounted tooth segments Double-row flail drum with 16 free-swinging cast steel flail holders, replaceable flail tips, and 28 fixed ripping teeth Standard: “Streusel plus” flail tip Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raise/lower support leg, open/close rear basket, fold/unfold rear conveyor, release travel drive) when engine is off 24-V electrical control Separate control box at the rear of the machine Scraper floor with 29 slats Chain drive feed roller and scraper floor Extended radio remote control with 2 foot switches Acoustic start-up warning Rear conveyor: 6 m, 1,500 mm wide with anti-magnetic center section Reinforcement plates (Hardox) on both sides of the feed hopper for the side walls (loading edge) Travel drive preparation Fire extinguisher Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: Hydraulic travel drive Extended radio remote control with foot switch Isdpfx Agsxx Sdpj Sstp “Bear Claw” flail tips Fine-shredding basket Watering system Lighting package: engine compartment and rear conveyor Delivery date by arrangement

Condition: good (used), Year of construction: 2017, functionality: fully functional, Vecoplan Shredder, Type VAZ 110, year of manufacture 2017, with hopper and extraction port. Manufacturer: Vecoplan Type: VAZ 110 Year of manufacture: 2017 Motor rated power: 18.5 kW Frequency inverter rated power: 22 kW Feed opening: 1200 x 1075 mm Rotor diameter: 250 mm Rotor length: 1075 mm Rotor speed: 90-250 rpm Number of cutting tools: 27 Throughput: 2 cbm/h Ijdpfx Aew Rcrieg Sstp Screen hole size: 20 mm Extraction port diameter: 200 mm Dimensions: approx. 2355 x 1590 x 980 mm (LxWxH) Weight: approx. 1800 kg Accessories: Spare parts package with 20 mm screen, 1 set of tools, cutters and counter cutters, motor, plastics, springs, etc. Materials: Wood waste, films, packaging material, chipboard, paper, textiles Remarks: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find the video on our website or YouTube channel. Complete documentation including CE declaration is available. Inspections can be arranged at any time by appointment. On request, we are also happy to carry out test runs with your material for a handling fee. If you have any questions about the machine, we are available by phone Monday to Thursday from 08:00 to 14:00 h and Friday from 08:00 to 13:00 h. Please note: All technical data is based on manufacturer information. We do not accept liability for the information provided or any possible errors. All offers are subject to change, prior sale, and revocation at any time. Inspections can be arranged upon request. Sale is ex location, without warranty or guarantee.

Condition: used, Year of construction: 2023, operating hours: 119 h, functionality: fully functional, Basic Package Inventhor Type 6 Load-sensing system 500-liter fuel tank Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally arranged wear strips 24 V electrical control – additional electric pump to operate the following functions when the engine is off: Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Optional Equipment: 260 kW power train – EV 3-axle drawbar chassis unit Shredding system Size L – 20 teeth Auxiliary hydraulic connections 35–80 l/min Hydrostatic drive Ijdpfxjxx Sbne Ag Sjtp Hopper extension 350 mm, watering device both sides 7 m rear conveyor belt Overband magnet – Neodymium Frame for 7 m overband magnet Delivery date to be agreed

Condition: used, Year of construction: 2024, operating hours: 630 h, functionality: fully functional, Basic package AK565 Plus: MTU diesel engine 6R1300, 390 kW at 2,000 rpm, EUROMOT V compliant Central axle trailer chassis with 3 axles, road approval for 80 km/h Braking system incl. EBS and lighting according to EC directive 50 mm EC towing eye incl. slip-on shoe Tires: 435/50 R 19.5 Hydraulically adjustable support leg Splash guards (internal and side fenders) Permissible total weight: 22,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, meets EUROMOT V emission standard Exhaust air directed upwards Load-dependent material feed control incl. automatic reversing of the scraper floor Fuel tank: 600 liters Feed roller: length 1,690 mm, diameter 510 mm, with fitted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable "Dopplock" flail tips Standard: "Streusel plus" flail tip Impact plate with teeth Centrally positioned lubrication strips Electric pump for cylinder functions (e.g. raising/lowering support leg and opening/closing rear hood, folding in/out discharge conveyor, releasing drive) when engine is off 24 V electric control system Separate control box at the rear of the machine Hydraulically folding fine shredding basket "Multimesh" (mesh size between 30 - 280 mm, gradations on request) incl. one-piece rear flap Scraper floor with 32 slats Separate drive for feed roller / scraper floor - "Twin Drive" Rear discharge conveyor with anti-magnetic center piece - belt length 6,000 mm, belt width 1,800 mm, discharge height 4.2 m – height adjustable Underbelt - belt length 1,400 mm, belt width 1,750 mm Extended radio remote control with 2 foot switches Drive system preparation Reinforcement plates for the intake hopper (material: Hardox), both sides for side wall Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: Hydraulic drive system Additional hydraulic connection 20 l/min "Bear Paw" flail tips Impact plate with strike bar and tooth row Itedpfexx R Akex Ag Sep Neodymium magnetic roller incl. chute NEODYM overband magnet for rear discharge conveyor Frame for overband magnet Moistening system LED lighting package: engine compartment and rear discharge conveyor Delivery date by arrangement

Condition: used, Year of construction: 2013, operating hours: 4,000 h, functionality: fully functional, Basic Package AK435: Central axle trailer chassis with 2 axles, road approval for 80 km/h Braking system incl. ABS and lighting according to EC directive 50 mm EC towing eye including plug-in shoe Tyres 385/65 R22.5 Hydraulically adjustable support legs Splash guards (internal and side fenders) Permissible total weight 19,000 kg Mercedes-Benz diesel engine OM460LA, 315 kW at 2,000 rpm, compliant with EUROMOT IIIB emission standard Load-dependent material feed control incl. automatic scraper floor reverse function Fuel tank 450 liters Feed roller: length 1,690 mm, diameter 510 mm, fitted with toothed segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: 'Sprinkle' flail tip Centrally arranged wear rails Electric pump for actuating cylinder functions (e.g., raise/lower support legs and open/close rear basket, fold in/out rear conveyor, release drive) when engine is off 24-V electric control system Separate control panel at rear of the machine Itsdpfxjxx Ryis Ag Ssp Hydraulically folding fine-shredding basket (mesh size between 30 - 280 mm, intermediate sizes on request) incl. tailgate Scraper floor with 32 slats Radio remote control incl. transmitter, receiver, 230 V charger, 12/24 V charging cable, 2 batteries, transmitter mount. The following functions can be operated: Engine: stop, engine speed: +/-, scraper floor: stop/reverse/forward, drive: stop/reverse/forward/release, rear basket: open, rear/bottom conveyor: on/off, support leg: raise/lower Drive preparation Acoustic start-up warning Paint: 2-component paint RAL2011 deep orange Optional Equipment: Hydraulic drive 600 l fuel tank 'Bear Paw' flail tips Fine-shredding basket 4 m rear conveyor, belt width 1800 mm Humidification system Separate drive for feed roller/scraper floor Reinforcement plates on feed hopper Delivery date by arrangement

Condition: used, Year of construction: 2023, operating hours: 2,798 h, functionality: fully functional, Basic Package AK 640 SA: Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting in accordance with EU regulations Tires: 385/65 R22.5 Gross vehicle weight 32,000 kg Hydraulically adjustable support legs Splash guards (inner and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, compliant with EUROMOT V emission standard Auxiliary hydraulic connection 20 l/min Load-dependent feed control incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank: 2 x 450 liters Feed roller: length 1,690 mm, diameter 510 mm, with bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Isdpfx Ajxx Rrrsg Setp Standard: 'Streusel plus' flail tip Impact plate with teeth Centrally arranged wear strips Electric pump for cylinder functions (e.g. lifting/lowering support legs and opening/closing rear basket, folding/unfolding rear conveyor, disengaging drive) when engine is off 24V electrical system Separate switch box at the rear of the machine Hydraulically folding fine shredding basket "Multimesh" (mesh size between 30 - 280 mm, gradations on request), incl. one-piece rear flap Rear discharge conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic center section Lower conveyor: belt length 3,800 mm, belt width 1,400 mm Engine compartment protection plate (material: Hardox) Moistening system for external water connection Scraper floor with 71 slats Wear protection in drum area Reinforcement plates on both sides of the feed hopper (made of wear-resistant steel) Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional Equipment: Hydraulic drive Fine shredding basket Scraper floor chain lubrication Lighting package: engine compartment and rear conveyor LED lighting package (scraper floor and infeed) 'Bear Paw' flail tips Delivery date by arrangement Available from 04/2026

Condition: used, Year of construction: 2023, operating hours: 1,400 h, functionality: fully functional, Basic package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally positioned wear strips 24V electric control – additional electric pump for operation of the following functions with the engine switched off: Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: 260 kW drive train – electric version 400 mm track undercarriage Size L shredding system – 20 teeth Size L limiter Auxiliary hydraulic connections 35 – 80 l/min 7 m rear conveyor Itjdpfx Agsxx Rlfj Sep Neodymium overbelt magnet Frame for 7 m overbelt magnet Hopper extension 350 mm, water spray unit on both sides Delivery date by arrangement

Condition: used, Year of construction: 2022, operating hours: 3,000 h, functionality: fully functional, Basic package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally positioned wear/slide strips 24-V electric control system – additional electric pump enables the following functions with engine off: raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Itodpfx Asxx N T Ijg Ssp Large side GRP maintenance doors Service-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan wheel Three-sided load protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Painting: RAL2011 deep orange Optional equipment: Driveline 310 kW – EV 3-axle drawbar chassis unit Shredding system Size L-C3 600/4-30Z Size L limiter Auxiliary hydraulic connections 35 – 80 l/min Hydrostatic drive Hopper extension 350 mm, left-side watering Rear conveyor 7 m Overband magnet Neodymium Frame for 7 m overband magnet Central lubrication system Custom paint finish in RAL Delivery date to be arranged

Condition: used, Year of construction: 2022, operating hours: 1,150 h, functionality: fully functional, Basic package Inventhor 6: - Load-sensing system - Fuel tank 500 liters - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged wear strips - 24V electrical control system – additional electric pump for actuating the following functions when the engine is off: - Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GRP service doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder Iedpjxx N Dgofx Ag Setp - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: - Driveline 260 kW – EV - 2-axle semi-trailer chassis unit - Size L shredding system – 20 teeth - Size L limiter - Additional hydraulic ports 35–80 l/min - Hydraulic travel drive - Hopper extension 350 mm, watering system both sides - Hopper wedge Size L with NM brush - Rear conveyor 7 m - Overband magnet neodymium - Frame for 7 m overband magnet Delivery date by arrangement

Condition: used, Year of construction: 2008, operating hours: 773 h, functionality: unexamined, Equipment: Basic Package AK530: - Three-axle chassis for 80 km/h - Braking system with ABS in accordance with EC Directive - Tires 385/65 R 22.5 - Permissible total weight 25,000 kg - Daimler-Chrysler engine OM 502 LA, 390 kW with Euro Stage III - Electrical system 24V - Radio remote control Iodpfx Aexx Ndysg Sotp - Additional hydraulic connection 11 cm³ - Rear discharge conveyor AA 6.15 m, hydraulically foldable, discharge height 4.5 m with anti-magnetic center section - Undercarriage belt AA 1.7 m, scraper floor with 34 slats - Fuel tank 750 liters - Separate drive for infeed roller and scraper floor (twin drive) - Load-dependent material feed control incl. automatic scraper floor reversal - Hydraulically foldable fine-shredding basket - Infeed roller with bolt-on tooth segments - Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips - Flail tips made of hard metal "Streusel" - Centrally arranged lubricating strips - 24 V electric pump to operate cylinder functions when the engine is off - Separate control box for rear operation - Hydraulically adjustable support legs - Paintwork: 2-component paint, RAL 2011 – deep orange Optional Equipment: - Hydraulic drive - NEODYMIUM overband magnet - Mounting bracket for overband magnet - Moistening system

Condition: used, Year of construction: 2018, operating hours: 6,800 h, functionality: unexamined, Basic package AK560: Itedpfx Asxx Rvkjg Ssp Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC Directive 50 mm EC towing eye incl. guiding shoe Tires 385/65 R22.5 Hydraulically adjustable support leg Splash protection (inner and side-mounted mudguards) Permissible total weight 19,000 kg Mercedes/MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT IV emissions standard Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank 450 liters Feed roller: length 1,690 mm, diameter 510 mm, with mounted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: "Streusel" flail tip Centrally arranged wear strips Electric pump for operating cylinder functions (e.g., raising/lowering support leg and opening/closing rear basket, folding/unfolding rear conveyor, releasing travel drive) when engine is off 24 V electrical control Separate control box at the rear of the machine Hydraulically folding fine shredding basket (mesh size between 30 - 280 mm, gradation on request) incl. rear flap Scraper floor with 32 strips Complete radio remote control Preparation for travel drive Acoustic start-up warning Paint finish: RAL2011 deep orange Additional equipment: Special paint in DB6841 MB-Trac Green Hydraulic travel drive Fuel tank 600 l Fine shredding basket Rear conveyor 4 m, belt width 1800 mm Separate drive for feed roller and scraper floor Reinforcement plates on both sides of the feed hopper sidewalls Impact plate with wear strip and additional tooth row Delivery date by arrangement

Condition: good (used), Year of construction: 2022, operating hours: 600 h, functionality: unexamined, Equipment: Methor chain basic package without shredding system - Crawler chassis including 2 driving speeds - Chassis chain 400mm 3-bar - Additional hydraulic connection 70 l/min - 24-V electric control - Large radio remote control complete - Maintenance-friendly engine compartment with LED light - Folding funnel with path sensor and automatic control Iedpevrz Rvsfx Ag Sjtp - Hydraulically reversible fan wheel - Acoustic start-up warning - Paint finish: RAL 2011 deep orange Special equipment: Shredding system size L (8 teeth) Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Irrigation

Condition: good (used), Year of construction: 2020, operating hours: 881 h, functionality: unexamined, Equipment: Methor chain basic package Iodpfxsvnmmzo Ag Sotp Track chassis including 2 driving speeds Chain 400mm 3-bar Additional hydraulic connection 70 l/min 24-V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding funnel with path sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the roller Irrigation LED work lighting Additional electric pump for operation when the engine is not running Fire extinguisher GN 9 A-3 DIN EN 3

Condition: used, Year of construction: 2021, operating hours: 200 h, functionality: unexamined, Equipment: Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-bar Additional hydraulic connection 70 l/min 24-V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding hopper with path sensor and automatic control Hydraulically reversible fan wheel Iedpfx Agevnq Tro Sstp Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Rubber quick-change pad Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Crushing system size L (8 teeth) Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the machine Irrigation LED work lighting Additional electric pump for operation when the engine is not running

Condition: good (used), Year of construction: 2020, operating hours: 590 h, functionality: unexamined, Equipment: Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-link Additional hydraulic connection 70 l/min 24 V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding hopper with position sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Rubber quick-change pad Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Isdpfx Agjvnq Rks Sstp Roller quick-change system on the roller Roller quick-change system on the machine Irrigation LED work lighting Additional electric pump for operation when the engine is not running Fire extinguisher GN 9 A-3 DIN EN 3