Used Ovens for sale (255)

Year of construction: 2023, Condition: new, Functionality: fully functional, operating temperature: 1,500 °C, COMPLETE SYSTEM INCLUDING: (2) NEL C30 Hydrogen Generators On Site Gas System N-500 TGN Nitrogen Generator 110 MoLa Carrier Tray Sets RO/DI Water System Bus Rail TRAY SIZE: 330 mm W x 330 mm L LOADING HEIGHT: 300 mm H CAPACITY IN 316L CYCLE: 8-10 Trays/hr NUMBER OF REST DEBINDING ZONES: 10 x 20 kW Top/Bottom Control NUMBER OF SINTERING ZONES: 10 x 30 kW SEGMENTS OF COOLING ZONE: 2 x 3m, 1 x 2m +Belt Drive and Return MAXIMUM TEMPERATURE REST DEBINDING: 800 C MAXIMUM SINTERING TEMPERATURE: 1,500 C PROCESS GAS CONSUMPTION (H2): 30-50 m3/h Dcjbvdiotxbuxjmfsg PURGE LOCK NITROGEN GAS CONSUMPTION: 34 m3/h POWER CONSUMPTION: 70kWh COOLING WATER CONSUMPTION: 3 m3/h POWER: 3 x 480V / 60Hz INSTALLED POWER: 500 kW IDLE MODE NITROGEN GAS CONSUMTPION: 15-16 m3/h IDLE MODE HYDROGEN GAS CONSUMPTION: 1-1.5 m3/h

Condition: good (used), vacuum furnace, chamber furnace -Vacuum furnace: with vacuum pump -Chamber size: D500/W400/H400 mm Djbveif Sbiodimfocg -Thermostat: up to max. 320°C -Vacuum pump: power 1.1 kW -Total dimensions: 890/800/H1785 mm -Weight: 180 kg -Control: Two-point control using program control

Year of construction: 2002, Condition: used, power: 230 kW (312.71 HP), heating capacity: 225 kW (305.91 HP), temperature: 1,000 °C, usable height: 50 mm, usable length: 5,750 mm, usable width: 650 mm, CHARACTERISTICS HEAT TREATMENT EQUIPMENT .. operation modus: continuous .. heating method: gas+electric .. Heating capacity: 225 kW .. temperature max.: 1000 °C HEAT TREATMENT COMPARTMENT / ZONE .. length: 5750 mm .. width: 650 mm .. Height: 50 mm ELECTRICAL SPECIFICATIONS .. total power consumption: 230 kW .. mains voltage: 400 V .. mains frequency: 50 Hz Application: Production of friction linings for clutches Sintering of steel, copper and brass powder materials onto non-ferrous metal/steel sheet Cooling in an oxidation-free atmosphere Complete system with powder application, furnace, cooling section, cleaning Design: Continuous furnace with belt conveyor with heating and cooling section Natural gas and electric heating Heating temperature contro zones 6 Dsbvdiowhkd Nsmfjcg Fuel gas (natural gas) approx. 5 Nm3/h Purge gas N2 approx. 30 Nm3/h Process gas H2/N2 60/40% approx. 40 Nm3/h Electrical heating Zone 1: 2 x 27.5 kW Zone 2: 2 x 27.5 kW Zone 3: 2 x 27.5 kW Zone 4: 55 kW Zone 5: 5 kW

Condition: used, Chamber kiln has the following dimensions: Length 2800 Depth 1800 Dcobvjwgkqaedimfjg Height 3000 Max. 500° Fully functional

Condition: used, Year of construction: 2016, Functionality: fully functional, Manufacturer: BHK-TEC Dsbowhvcwsvdimfocg Microwave Oven Type: MW50-2V Number of Magnetrons: 32 Voltage: 400 V 50/60 Hz Connection: 70 kW Pre-fuse: 250 A Frequency: 2450 MHz Compressed Air: 6-10 bar Year of Manufacture: 2016 Emissions Sound Pressure: 80 dB Frequency: 50/60 Hz Exhaust Air: 2 x 8500 m³/h Intake Air: 4 x 3500 m³/h Intake Air Connection: 2 x 346 mm ø Exhaust Air Connection: 1 x 465 mm ø Dimensions and Weight Microwave Oven: (LxDxH) 3735 x 2373 x 4756 mm Min. Room Height: 5000 mm Usable Interior Space: (LxWxH) 3100 x 1200 x 1200 mm Max. permissible roller conveyor load capacity: 3000 kg Max. permissible total weight: 9000 kg Empty weight: 6000 kg Control cabinet: (LxDxH) 3800 x 520 x 2250 mm Weight: 700 kg

Condition: good (used), Functionality: fully functional, Temperature max: 300° Celcius Inner size LxWxH: 2.000 x 2.000 x 2.000 mm Heating: Hot Air Circulation Power: 75 kW County of origin: Germany Debvdimewc R Idefjcg Outside dimensions LxBxH: 350 x 330 x 220 cm Weight: 2.000 kg

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, Available from Prototype Lab, equipped with: Elnik PLC Controller Windows OS Afterburner ACCU-Temp NEL H6 Hydrogen Generator MSA Gasgard XL Control Unit Djbvetxc Ndedimfjcg Elnik's MIM 3000 furnaces process any metal with any binder in a one step debinding and sintering cycle without having to move the parts. This is accomplished through a gas tight refractory metal retort with a gas management system. The gas management system consists of mass flow controllers for the retort and hot zone and a partial pressure valve at the specially designed and modified dry vacuum pump. Different flow of gases into the hot zone and retort and a slight partial pressure inside the retort guarantee that no binder materials stick to the cold walls of the furnace. Useable Retort Size: 16.5" x 18" x 24" Useable Volume: 116 Liters Total Square Area: 4,224 sq/in Pump Speed: 115 CFM

Condition: good (used), Chamber furnace, hardening furnace, tempering furnace, muffle furnace, nitriding furnace, chamber furnace, annealing furnace, annealing and hardening furnace -Manufacturer: Nabertherm, hardening furnace type M110 -Program control: ROD Type SE-402 -Usable space: 200/320/H150 mm Dcjbswg Rv Ajvdimfeg -Heating power: 2.9 kW -Nominal temperature: 1100°C -Individual components: see photos -Dimensions: 740/580/H755 mm -Weight: 78 kg

Year of construction: 2009, Condition: used, controller manufacturer: SIEMENS, controller model: S7 300, temperature: 1,140 °C, usable height: 15 mm, usable length: 3,636 mm, usable width: 300 mm, CONTROLS .. PLC SIEMENS S7 300 CHARACTERISTICS HEAT TREATMENT EQUIPMENT .. temperature max.: 1140 °C HEAT TREATMENT COMPARTMENT / ZONE .. length: 3636 mm .. width: 300 mm .. Height: 15 mm ELECTRICAL SPECIFICATIONS Dsbowhkdvsvdimfocg .. mains power supply: 173 kVA Application: Production of friction linings for clutches Sintering of steel, copper and brass powder materials onto non-ferrous metal/steel sheet Cooling in an oxidation-free atmosphere Use for small series or pilot plant Design: Continuous furnace with belt conveyor with heating and cooling section Fuel gas: Natural gas Forming gas: H2, N2 Inert/protective gases: N2, argon

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 11434, Used TRUS/S recirculating air oven Manufacturer Keller, Ihne & Tesch Little used, very good condition 2 chambers each 800 x 1,600 x 1,600 mm (W x D x H) Operating temperature: up to 70°C Heating output: 18 kW Recirculating air fans: 4 x 1.1 kW Air flow: horizontal Dryer consisting of two separately controllable chambers, arranged side by side Four-channel temperature control with four electronic overtemperature protection controllers Six-channel graphic recorder for interior temperature and product temperature (handheld sensor) documents the drying process Power switching: solid-state relay Ventilated panels on the interior side wall for subsequent optimization of temperature tolerance 60 mm insulation reduces heat loss Dcobvewdkknedimfsg The oven originates from a company liquidation and is immediately available from the Merenberg warehouse.

Condition: used, Year of construction: 2022, Manufacturer : France étuves Model : XXL12 Year : 2022 Dcsbvswchdcjdimfjg Power : 53,3 KVA Max. temperature : 300°C Inside dimensions : 2000 x 3000 x 2000 mm Outside dimensions : 2559 x 3576 x 2798 mm Power supply : 400V ~3P 50Hz 80A Variable speed control for inside ventilation Viewing window on door Temperature cycle programmer Air extractor

Condition: good (used), 1 x Winward Engineering Low Level Depositor Model: Magnum Dobvdewfta Isimfscg Located in Melksham, Wiltshire

Year of construction: 2001, Condition: used, Functionality: fully functional, Industrie- & Anlagenbau - Bad Königshofen Continuous plant / Hardening furnace → Consisting of the process stages: Hardening, post-treatment and temperingYear of construction: 2001General: 2001-2023 production-accompanying exchange of wear ilability over the year 90Control system: S5Current plant technology: Pusher-type furnace (made of cast steel)Output during quenching and tempering max. 300 kg/h Output during carbonitriding max. 100 kg /hThe plant consists of the 7 main components: Continuous annealing furnace, quenching bath, oil storage tank, de-oiling and washing station; manipulator, continuous tempering furnace, control cabinet / ctionality of the continuous annealing line: - the plant is capable of quenching and tempering and carbonitriding on oil bath basis- process temperatures up to 930°C- Base or safety gas: (for O2 closure) nitrogen/methanol (as carbon donor) is used- process gas: natural gas or ammonia but convertible to propane- the curing area is heated with natural gas- the tempering furnace is powered by electricity- the round wire link belt has a width of 765mm (1.4864 Nb)1. continuous annealing furnace: - Model: DOBGS 7.5 1 50-10-0 (intermittently conveying, protective gas-tight outer shell, indirectly heated with recu - radiant tube burners.- Outer dimensions: Continuous furnace L x W x H = 7.85 x 2.10 x 2.25 m → annealing zone length 5.0 m; conveyor belt width: 765 mm.- Temperature: max. 980 °C +/- 5 K- Total heating power: 210 kW - by means of 14 Noxmat - steel tube burners manufacturer ALD with a radiant tube diameter of 150 mm.- temperature control zones: 3 heating and control zones (i.e. zone1 - 6 x 15 = 90 kW; zone2 - 4 x 15 = 60 kW; zone3 - 4 x 15 = 60 kW)- Protective gas supply / control: 3 x each nitrogen, methanol, natural gas, ammonia air- Throughput speed: adjustable via frequency converter 2 to 7 m/h- Furnace time: approx. 75 min at 4m/h; adjustable from 38 to 135 min; holding time 50 min at 4m /h- Transport equipment: Round wire link belt made of 1.4864 with 18 mm lamellar edge- Inert gas consumption: inert gas: nitrogen approx. 3 m3/h; methanol 3 l/h, natural gas 500-2000 l/h, ammonia 200-300 l/h, air 500 l/h- Lining: is lined with fireclay, ceiling with thermal insulation wool, condition: in need of repair- Electrical connected load approx. 10 kW - Total weight approx. 15.800 kg2. quenching bath model KAB 11,1: - suitable for quenching with oil- Structure: electrically driven circular conveyor, level difference detector, lifting platform, basket turning device, bath heating, bath circulation, water cooling and draining station.- External dimensions: L x W x H = 2.80 x 2.50 x 2.00 [m]; drop height in quenching oil = 1.0 [m]. - Total weight with oil: approx. 16,000 [kg].- Connected load heating: 48 kW- oil cooler HK4 - make Hering 2 x 2,2 kW- incl. level - difference detector model NDM 100-03. oil reservoir model B12,5: - Suitable for holding the oil from the quenching bath with pump and support frame for centrifuge system.- External dimensions: L x W x H = 4.20 x 2.50 x 1.55 m; max. filling height 1.40 m; max. volume 12.88 m34. de-oiling and washing station: - consisting of 1x centrifuge AZ 500 manufacturer WMV, 1 x washing machine WA 500, 1 x centrifuge AZ 500 H for drying. - 8 cylindrical transport containers according to drawing 300 /864 /96 - drum height 500mm- connected load: ca 15 kW5. manipulator model MBM 63/1 - (500): - consisting of a mechanical cross s Dsbvdiep Ecn Asmfocg

Year of construction: 1988, Condition: good (used), Chamber furnace, hardening furnace, tempering furnace, muffle furnace, nitriding furnace, chamber furnace, annealing furnace, annealing and hardening furnace -Manufacturer: Nabertherm, hardening furnace type N60/H -Program control: STANGE type SE-402 -Usable space: 400/420/H390 mm Dcjbvdiovrivajmfog -Heating power: 10 kW -Nominal temperature: 1340°C -Individual components: see photos -Transport dimensions: 950/1070/H860 mm -Weight: 290 kg

Year of construction: 2017, Condition: used, controller manufacturer: SIEMENS, controller model: S7-1500, pipe diameter: 50 mm, pipe length: 1,200 mm, wall thickness: 6 mm, CONTROLS .. PLC SIEMENS S7-1500 FEEDSTOCK TUBE .. external diameter min.: 15 mm .. external diameter max.: 50 mm .. wall thickness min.: 1.8 mm .. wall thickness max.: 6 mm .. length min.: 200 mm Dobeurckgjvdimfjcg .. lenght max.: 1200 mm System consists of: + ITG ITPA 100k150 vertical induction hardening system, YoM 2017 150 kW, 100 kHz + BACHMANN automation cell, YoM 2017 + 2x ABB IRB 4600 handling robots, YoM 2017 load capacity 60 kg, additional arm load 20 kg, reach 2.05 m

Condition: good (used), Year of construction: 2021, machine/vehicle number: 210802, fuel type: electric, The inner chamber measures 700mm x 700mm x 1000mm and is heated by an electrofusion wire spiral. It is insulated by ceramic fiber, and the overall dimensions of the unit are 1300mm x 1400mm x 1750mm Dcobvdimouqi A Tefeg Basic data: Power supply: 400V 3N~ 50Hz Rated power (kW): 18 Maximum temperature (oC): 1250 Chamber capacity (l): 490 Temperature control: 1-zone Uniformity of temperature distribution in the working chamber area: /- 2 oC Net weight (kg): 700

Year of construction: 2012, Condition: used, Technical details: max. temperature: 700° - übliche Temperatur: 400 - 650°C Grad size of opening: B: ca. 2200 x T: ca. 3800 x H: ca.1100 mm program control: Siemens S7/300 IM 151-7 interface: Ethernet container volume: Ofen-Volumen: 9,2 m³ l control voltage: 24 / 230 Volt current type: 1P/PEN; 50 Hz Voltage: 400 V elect. connected power requirement of heater: 3 x 3 x 21 kW = 189 kW flow rate: 3 x ca. 9.000 = 27.000 m³/h weight of the machine ca.: 8,0 t dimensions of the machine approx. HxWxD: ca. 3.9 x 3.8x 4.8 m dimensions electric cabinet: ca. B: 2.400 x T: 400 x H: 2.000 mm transport dimensions LxWxH: ca. 5,2 x 3,6 x 2,9 m Electrically heated circulation oven Electric annealing furnace whose housing is made of profiled sheet steel and lined with lightweight refractory bricks/ firebricks. Application/processes: mainly annealing of low-alloy and high-alloy wood cylinders (e.g. alloyed gray cast iron) Usual operating weight 5000kg max. 8000kg The parts are placed directly crosswise on the bogie hearth/grate in the flow device. (Height above floor approx. 750mm without grate) Heating integrated in oven ceiling Circulation fan (3 compact fans) on oven side wall, 3 x 4.0 kW = 12.0 kW Forced cooling (1 cooling air fan) Program control via 25 programs with 50 program sections per program Oven door/lifting door with SWE gear motor approx. 2.2 kW (frequency-controlled) Bogie hearth drive approx. 3.0 kW SEW geared motor (frequency-controlled) incl. center rail (chain drag) used, good condition * Dcjbvdisu R Dhxsmfeg

Year of construction: 1985, Condition: used, Hardening furnace Heraeus Type KM 260 width 250 mm height 150 mm depth 500 mm Dsbvdimegtxuqefjcg Temperature up to 1150 c

Year of construction: 1989, Condition: good (used), Chamber furnace, hardening furnace, tempering furnace, muffle furnace, nitriding furnace, chamber furnace, annealing furnace, annealing and hardening furnace -Manufacturer: Nabertherm, hardening furnace type N300/S -Program control: STANGE type SE-402 -Usable space: 560/715/H790 mm -Heating output: 18 kW Dcobvsvivvnedimfjg -Nominal temperature: 1280°C -Individual components: see photos -Transport dimensions: 1200/1350/H1930 mm -Weight: 604 kg

Year of construction: 2017, Condition: good (used), Endogas generator (endothermic protective or reaction gas) Generation capacity 24 - 60 m3/h H2/CO/N2 mixture Operating temperature 1000 °C Regeneration temperature 870 °C Electrical heating Gas consumption (input) Natural gas 13.8 m3/h Propane 9.6 kg/h Nitrogen 2 m3/h Dcobjv Nakijvdimfjg Electrical connection 27 kVA IPSEN EndoSave control system

Year of construction: 2000, Condition: used, Technical details: pass through height: 730 mm width: 750 mm depth: 875 mm Dcebvdiovrzwiomfjg degree: max. 450 °C voltage: 400 V work height max.: ca. 850 mm total power requirement: 18 kW Total weight, approx.: 436 kg dimension machine xH: 1,55 x 1,2 x 1,8 mm 4 shelves with supports can be placed in the heating chamber. This electric stove currently has 1x shelf in the interior. The door (size 930 x 880 x 60 mm) is lined with fireclay. Operation from the side via electronic control panel. A motor-driven fan is installed at the rear for cooling. The stove stands on a welded base frame made of sectional steel. *

Condition: good (used), Drying oven, drying cabinet, electrode re-drying, electrode cabinet, electrode dryer -Manufacturer: Meyer, drying oven type ES 2 -Power: 0.2 kW -max temperature 110 °C -Voltage: 110 V -Usable space: Ø 100 x 430 mm / 2 packages of electrodes Dsbvjwbdiledimfecg -Number: 18x dryers available -Price: per piece -Dimensions: 170/170/H565 mm -Weight: 7.8 kg/piece

Condition: good (used), Drying oven, drying cabinet, chamber dryer oven, warming oven, heating chamber, drying oven, drying cabinet, drying and warming cabinet, universal oven -Manufacturer: Heraeus, drying cabinet universal oven type T 6120 with viewing window -Useful space: BTH 550/370/495 mm / 100 liters -Heating power: 2.2 kW -Nominal temperature: 300°C -Voltage: 230 V -Individual components: digital temperature controller, adjustable ventilation flap -Dimensions: 940/585/H720 mm Dobowbc U Hjvdimfscg -Weight: 72 kg

Condition: good (used), Drying oven, drying cabinet, chamber dryer oven, warming oven, heating chamber, drying oven, drying cabinet, drying and warming cabinet, universal oven Dcsbowbc Rujvdimfsg -Manufacturer: Memmert, drying oven universal oven type UM 200 -Useful space: BTH 400/250/320 mm / 32 liters -Heating power: 1.1 kW -Rated temperature: 30°C to 220°C -Dimensions: 550/435/H600 mm -Weight: 28 kg

Condition: good (used), Drying oven, drying cabinet, chamber dryer oven, warming oven, heating chamber, drying oven, drying cabinet, drying and warming cabinet, universal oven -Manufacturer: Memmert, drying oven universal oven type ULP 800 on castors -Useful space: BTH 1040/600/1200 mm / 749 liters Dcsbvdswayuueimfeg -Heating output: 4.8 kW -Rated temperature: 30°C to 220°C -Individual components: see photos -Dimensions: 1190/790/H1620 mm -Weight: 170 kg