Condition: used, Year of construction: 2013, (1) Manual spray double booth with filter-based dust separation, including 2 EPG-Sprint X spray guns. Dcsdpfjzncn Djx Apwek

Condition: used, Year of construction: 2012, (1) Painting booth, including: SuperCube cabin; Super Centre powder supply unit; 2 vertical traversing systems, VU 012 series; 2 EPG-Sprint X spray guns; Post-filter unit; Monocyclone. Dcsdpfxjzncmyo Apwsk

Year of construction: 2015, operating hours: 2,286 h, condition: ready for operation (used), travel distance X-axis: 780 mm, travel distance Y-axis: 450 mm, controller manufacturer: FANUC, controller model: Series 32i-MODEL B, overall weight: 5,000 kg, spindle motor power: 7,500 W, table length: 700 mm, table width: 400 mm, number of axes: 3, This 3-axis AMADA Techster 84 surface grinding machine was manufactured in 2015. It features an X-axis travel of approximately 780 mm and a Y-axis travel of approximately 450 mm. The machine is equipped with a powerful 7.5 kW spindle motor and a magnetic chuck size of 700 × 400 mm. If you are looking to get high-quality grinding capabilities, consider the AMADA Techster 84 machine we have for sale. Contact us for further details. • Control: FANUC Series 32i-Model B • Power Supply: 200 V • Power Supply Type: 3-Phase • Frequency: 50 Hz • Power Consumption: 23 kVA • Full Load Current: 50 A • Spindle Motor: 7.5 kW (Reinforced) • Grinding Wheel Dimensions: Ø 355 × 38–50 × 127 mm • Distance from Spindle Center to Table: Approx. 500 mm • Magnetic Chuck Size: 700 × 400 mm • Magnetic Chuck Pole Pitch: 4 mm • LED Working Area Lighting • Oil-Cooled Grinding Spindle • Compressor Air-Cooled Spindle Cooling • Temperature Control Accuracy: Approx. ±0.1 K • Automatic Touch Probe • Highskip Feed / High Speed Skip • Ethernet (LAN) Interface • Extended Memory Control Module • FANUC Macro B • Programmable Timer for Automatic Start/Stop and Warm-Up • CE Declaration of Conformity • Band Filter System 450 (E3.1) • Coolant Tank Capacity: Approx. 450 L • Filter Fineness: Approx. 20 µm • Emulsion Mist Extraction System 1100 • IFMC Oil Mist Separator • Machine Demonstration Possible • Grinding Spindle Hours: Approx. 2,286 h • General overhaul including geometric overhaul. The machine has only operated for approximately 504 hours since the overhaul Dedpfezk I Afex Apwjck Additional Equipment • WinWop Programming Software for Windows • CGS (Complete Grinding Solutions) CAM Software • Profile Dressing Unit with TPA 100 R • Pre-Dressing Unit VPA 100 R with Motorized Diamond Wheel • Table-Mounted Straight Dresser • Diamond Dressing Arbor R100-40-0.15 CVD • Regrinding Package for Diamond Wheel (Techster 84–104) • 100 mm Diamond Wheel for Pre-Dressing Unit • 700 mm Stop Bar with Prism • MPM Automatic Wheel Balancing System • Grinding Wheel Flange for Techster 64/84 (Ø 355 mm) • Modified Grinding Wheel Guard • Operating Tool Kit (Keys and Extraction Arbor)

Year of construction: 2002, condition: ready for operation (used), travel distance X-axis: 250 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 60,000 rpm, number of axes: 5, This 5-axis KUGLER Micromaster MG2 was manufactured in 2002. It features an X-axis travel of 250 mm, Y-axis travel of 305 mm, and Z-axis travel of 200 mm. The machine is equipped with a high-speed Fischer Precise spindle, capable of speeds between 60,000 and 160,000 rpm, and a SERCOS real-time motion control interface. If you are looking to get high-quality grinding capabilities, consider the KUGLER Micromaster MG2 ultra-precision micro-grinder we have for sale. Contact us for further details. • Spindle speed range: 60,000-160,000 rpm • B-Axis: ±90° • C-Axis: Integrated • 5-AXIS: 5-axis kinematics (X, Y, Z, B, C) • Oil tank: Approx. 450 l • Ultra-Precision Micro-Grinder • Year of manufacture: 2002 • Condition: Used • Spindle: Fischer Precise • Spindle controller: PCF310 • Coolant system: RumA oil-cartridge system Dcedpfezk Eipsx Apwsk • Fischer Precise high-speed spindle • PCF310 spindle controller • RumA oil-cartridge coolant system • SERCOS real-time motion control interface • Spindle overhauled in 2019 • Vacuum table / fixtures available on request

Year of construction: 2007, condition: ready for operation (used), travel distance X-axis: 1,120 mm, number of axes: 3, This 3-axis FAVRETTO MB100 surface grinding machine was manufactured in 2007. It features a work plane of 500 x 1000 mm, providing ample space for various grinding applications. If you are looking to get high-quality grinding capabilities, consider the FAVRETTO MB100 machine we have for sale. Contact us for further details. Dcedpfszk D Tmex Apwjk

Condition: used, Year of construction: 2007, functionality: fully functional, input voltage: 250 V, We offer this used Wagner Ecotech System powder coating equipment, manufactured in 2007. - Powder coating booth with spray robot (6 spray guns) - Donaldson Torit dust extraction system (11 kW) - 75m automatic Emotec conveyor system (disassembled). Year of manufacture unknown. Dcedpfx Apszn Ixnewek

Year of construction: 1982, condition: used, degree 1150 working heigth 200 mm length 1000 mm width 800 mm depth 1400 mm Dedpfx Ajt Hw Rwopwjck Coil Weight per Base 300 kg Base Diameter mm Stack height 0 mm No. – Furnace 0 No. – Base 0 No. – Cooling Hood 0 total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Year of construction: 1990, condition: excellent (used), O F F E R Subject to prior sale and errors excepted, we can offer you, without obligation, the following ex-stock: D E G E N Manual Cutting, Pointing, and Cylindrical Grinding Machine for Ejector Pins Model: T Year of manufacture: 1990 _____ Grinding carriage center height: approx. 200 mm Grinding wheel Ø x bore: 200 x 30 mm Grinding wheel speed: approx. rpm Grinding wheel drive power: approx. kW Workpiece headstock center height: 160 mm Workpiece headstock longitudinal adjustment: approx. 100 mm Workpiece headstock transverse adjustment: approx. 200 mm Workpiece headstock swiveling either side: approx. 2 x 30° Dedpfexzuuvox Apwock Collet chuck capacity: 0.5 – 20 mm Weight: approx. 500 kg Accessories / Special equipment: • Workpiece headstock swiveling for pointing and deburring • Collet chuck with approx. 10 different collets • Plexiglass safety guard for grinding wheel • Compact, free-standing on sturdy base • Optional cross-slide feed unit Condition: good to very good – under power, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further tool grinding machines available from stock – please enquire!

Condition: excellent (used), Year of construction: 1990, Description to follow! Dcodpfjxzk Iljx Apwsk

Year of construction: 1985, condition: used, degree 650 Dcedpfxst Hw Tfo Apwok working heigth 250 mm length 250 mm width 250 mm depth 450 mm total power requirement 8 kW weight of the machine ca. t dimensions of the machine ca. m

Condition: used, We are selling a small, mobile deionized water station that was previously used to fill small parts cleaning systems. As shown in the picture, the system has two filters, two ion exchangers, and a measuring unit for conductivity. The system can be used for the following applications: Glass cleaning Deionized water for forklift and other batteries Heating system filling Dcjdpfey Sxudex Apwek Vehicle cleaning Parts cleaning Cleaning water Aquarium keeping

Condition: not inspected (used), functionality: unexamined, We are selling a used gas console that was previously used in an Eltropuls plasma nitriding system. Dedpfx Asy Sxtgspwsck Included are 4 Bronkhorst mass flow controllers (MFCs) and other control electronics. We acquired these specific components as part of a package with other items, but we do not need them. Therefore, the components are offered here, untested, as a source of spare parts for interested parties.

Condition: good (used), Year of construction: 2016, total height: 2,640 mm, total length: 3,300 mm, total width: 3,960 mm, volume flow: 8 m³/h, Equipment: cabin, Technical Details: 75 m³ area including paint booth, drying booth, and paint storage room. Paint booth: - Internal dimensions: 3300 x 3960 x 2640 mm - Floor area: 13.1 m² - Internal volume: 34.5 m³ - Heating method: air intake from the air-conditioned area - Air supply: 8,000 m³/h Drying booth: Dcsdpfx Apoyhbggowek - Internal dimensions: 3300 x 3960 x 2640 mm - Floor area: 13.1 m² - Internal volume: 34.5 m³ - Heating method: electric heating cartridges, 22 kW, 3x400V - Air supply: 2,500 m³/h Paint storage room: - Internal dimensions: 3100 x 2000 x 2600 mm - Heating method: air intake from the air-conditioned area - Floor area: 6.2 m²

Condition: ready for operation (used), We offer a drum nozzle machine – OMSG TAPPETO SG 1R – FAC / 2. The machine is fully functional, and a new rubber belt has been replaced. Machine power consumption: Turbine – 4 kW Djdpfx Apozp U Uxoweck Filter – 1.5 kW Screw conveyor – 0.75 kW Drum rotation – 0.75 kW Machine dimensions: Height – 3400 mm Depth – 1850 mm Width – 1500 mm Weight – 1500 kg Complete documentation, including electrical documentation, is included with the machine.

Condition: used, Technical Specifications Manufacturer: Stahl Type: 8220 Design: Industrial furnace / Chamber furnace Condition: Used Further technical specifications according to the nameplate Equipment Robust and durable construction Electric heating Temperature control for precise processes Dcsdpfxoznv Eie Apwek Good heat distribution in the working chamber Suitable for professional use Application Areas Heat treatment of metal parts Annealing and tempering Drying processes Preheating of workpieces Laboratory and testing applications Research and development Chamber dimensions (internal): W 1000 H 1000 D 800

Condition: used, Manufacturer: David + Baader, Kandel Type: 10880.3 Machine type: Industrial oven / Chamber oven / Heat treatment oven For sale is a used industrial oven from the manufacturer David + Baader Kandel, type 10880.3. This oven is suitable for a wide range of applications in industry, crafts, laboratories, and workshops and is ideal for heat treatment, drying, or annealing processes. Technical data Manufacturer: David + Baader Kandel Type: 10880.3 Design: Electric chamber oven Condition: Used Further technical data available upon request or according to the nameplate Features and advantages Robust industrial design Uniform heat distribution Reliable temperature control Stable oven chamber Suitable for continuous operation Proven German quality Possible applications Heat treatment of metal parts Annealing and tempering processes Drying processes Dcsdpfeznv Dfjx Apwek Laboratory and testing applications Research and development Workshop and production operations Chamber dimensions (internal): W700 H700 D700

Condition: used, Manufacturer: W.C. Heraeus Hanau Type: KR 260 Machine type: Electric chamber furnace / laboratory furnace / heat treatment furnace For sale is a high-quality industrial furnace from the renowned manufacturer W.C. Heraeus Hanau, model KR 260. The furnace is ideally suited for heat treatment processes, annealing, material testing, laboratory applications, as well as research and development tasks. Features: Robust industrial design Dodpfx Aeznvzdopwsck Electrically heated chamber furnace Uniform temperature distribution Temperature control for precise processes Ideal for laboratories, workshops, industry, and research Solid German quality manufacturing Maximum temperature: 1150°C Voltage: 330V 50Hz Power: 11.4kW; 20A Application areas: Heat treatment of metals Annealing and hardening Material tests Ceramic and laboratory applications Research and development Chamber dimensions (internal): Width: 260 Height: 180 Depth: 500

Condition: good (used), Filter system, clean air filter, fine filter, filter, compact filter, particulate filter, filter cassette -Manufacturer: AAF International, air filter type AstroCel ® II -Part No: 12-1210-0205 -Front frame dimensions: 570x1170x110 mm, see photo type plate -Number: 2x air filters available -Price: per piece Dcedpfxjw U N Tue Apwok -Dimensions: 1170/110/H570 mm -Weight: 11 kg/piece

Condition: excellent (used), Shot blasting machine, continuous blasting machine, wear plates, blast wheel discs -Spare and wear parts: for shot peening system continuous blasting system -Baffle plates: 02122 V105 7 pieces dimensions 390/125/H145 mm / 11.7 kg/piece. -Baffle plates: C1315 N517 2 pieces dimensions 480/140/H175 mm / 15 kg/piece. Dcodpfowaiv Uex Apwek -Spinning wheel discs: 02122 V105 16 pieces, dimensions 350 x 80 mm / 112.5 kg/total. -Accelerator gears: 4 pcs. Ø 250 x 320 mm / 27 kg/pc. -Conveyor shafts: 3 pieces Ø 80 x 1640 mm / 40 kg/piece -Shipping/Price: complete -Total weight: 452.4 kg

Condition: good (used), Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter, compact filter, suspended matter filter -Air filter: stainless steel housing Dodpfx Apevxf S Djwsck -Number: 2x air filters available -Price: per piece -Dimensions: 610/100/H305 mm -Weight: 7.2 kg/piece

Condition: good (used), filter system, clean air filter, fine filter, filter, compact filter, suspended matter filter, filter cassette, cartridge filter, cassette filter -Manufacturer: DCE, cassette filter suitable for ID34372 BTR Unicell C16-2K7 -Number: 4x filters available -Price/Delivery: complete -Dimensions each: 800/95/H500 mm -Weight: 4.5 kg/piece Dcjdpfx Apsvmn Eiowsk

Condition: good (used), Filter system, clean air filter -Built-in, adjustable fan -Aluminum case -Volume flow rate: 1060 m³/h -Number: 3x blowers available -Price: per piece -Dimensions: 560/1160/H340 mm -Weight: 20 kg Dcsdob A Shujpfx Apwjk

Condition: good (used), Year of construction: 2000, Tray trolley, paint drying trolley -Total length: 1400 mm Dcedpfjb A Hcmsx Apwok -Total depth: 960 mm -Total height: 2000 mm -Compartment height: 28 mm -Shelf load capacity: max. 15 kg -Number: 2 cars available -Price: per piece -Weight: 127 kg/piece

Condition: used, Year of construction: 2005, Sandblasting machine, blasting machine, sandblasting cabin, sandblasting device -Manufacturer: Güde, blasting system sandblasting cabin type P1 -Interior: 580/480/H295/350 mm -Air requirement: 150 l/min / pressure 6 bar -Dimensions: 690/480/H490 mm Dedpsryak Tefx Apwsck -Total weight: 38 kg

Condition: good (used), Carbide coating machine, carbide coating device -Manufacturer: Carbumatic, hard metal coating machine -Type: unfortunately without a type designation -Voltage: 3 x 220-380 V / 50 Hz -Power: 0.4 kWA -Transport dimensions: 470/470/H380 mm Dsdpfx Apsy Edpyswsck -Weight: 49 kg/piece