Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: lighting, Modern painting systems and drying rooms must meet higher requirements than just a few years ago. The use of new coating systems, such as hydro-based paints, polyurethane resins, and epoxy-zinc powder or epoxy-iron glitter paints, demands advanced paint room solutions. A key aspect is the workpiece transport to the painting system and further processing. Our engineers offer expert guidance, whether it's dry overspray removal, wet washing, air humidification, or air drying, condensation drying at low temperatures, or hot air drying. We also provide pre-treatment solutions such as high-pressure washing with water circulation systems or compressed air blasting or wheel blasting techniques. Key Components of a Modern Painting System: Painting Booth: Ndsdpfx Afeun R Ufsusb The key element of our system, equipped with advanced air filtration and ventilation systems to ensure a dust-free environment for top-quality results. 🎨 Air Treatment: Essential for maintaining the air balance in the spray booth by drawing in filtered air to replace the air exhausted by the ventilation system. 🌬️ Exhaust System: Removes overspray and volatile organic compounds (VOCs) from the booth, ensuring good air quality and operator safety. 🌿 Drying & Curing Oven: After painting, parts are transferred to the oven to cure and obtain a durable, high-quality surface. 🔥 Conveyor System: An automated conveyor moves parts from the spray booth to the oven, ensuring efficiency and consistency. 🚜 Control Panel: The brain of the system, where the operator controls everything from ventilation to temperature and conveyor speed. ⚙️ Lighting: LED-based lighting provides excellent visibility while also offering energy savings. 💡 Why Choose Our Painting & Drying Systems: Quality: Carefully designed with advanced features to ensure greater efficiency and performance. 🎯 Safety First: Efficient exhaust systems, fire suppression, and fire-resistant materials ensure a safe working environment. 🛡️ Customization: We offer customizable solutions that cater to your specific needs and preferences. 🛠️ Easy Maintenance: Our systems are designed to be easy to maintain, with durable and easy-to-clean materials. 🔧 Excellent Support: We provide top-notch customer service and technical support for installation, troubleshooting, and optimal maintenance. 🧰 Environmental Responsibility: Our systems are designed to be energy-efficient and environmentally friendly, minimizing pollution and making them a sustainable choice for surface treatment. 🌍 Complete Solutions for Painting Systems: Conveyor Systems: Automated transport systems for painting and blasting booths, with intersections and switching systems for parts up to 2000 kg. 🚛 Easy-to-Replace Filters: Painting booths with ceiling exhausts and easy-to-replace filter elements. 🧹 Versatile Heating & Drying Solutions: Heating options include oil, gas, or electrical heating, as well as cross-flow heat exchangers and activated carbon filters for solvent-heavy processes. 🌡️ Integrated Paint Supply System: An integrated paint supply system with airless pumps for full coverage in the painting booth. 🎨 Our complete solutions provide everything you need for efficient and safe painting operations. Get in touch with our experts today to optimize your painting system!

Condition: new, SAPI Powder Coating The Perfect Coating for Lasting Protection. Powder coating is a highly effective and widely used method for applying a protective and decorative surface to various types of substrates. It is a dry finishing process where a fine powder made of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, allowing it to adhere evenly to the surface and form a uniform coating. Ndedeun Sd Uopfx Afuob To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared first. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for ensuring that the powder bonds effectively to the substrate, creating a strong and long-lasting coating. Components of a Powder Coating System A typical powder coating system consists of several components and devices required for applying and curing the powder coating. Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures an even distribution of the powder. 🎨 Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. 💨 Powder Feed System The powder feed system consists of a hopper or container where the powder coating material is stored. It typically includes devices like powder pumps, feed hoses, and powder sieves to transport the powder from storage to the spray gun. 🔄 Pre-treatment Equipment Pre-treatment systems are used to prepare the substrate before applying the powder coating. This can include processes like cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. 🧼 Curing Oven A curing oven is a crucial component of a powder coating system. It is used to heat the coated substrate to the correct temperature so the powder coating melts, flows, and hardens into a permanent surface. The oven usually consists of a conveyor system or racks to transport the coated parts through the oven chamber. 🔥 Exhaust System An exhaust system is installed to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe work environment for the personnel and prevents the accumulation of powder particles in the air. 🌬️ Looking for a Powder Coating Solution? Are you searching for a custom powder coating solution? We specialize in providing tailored powder coating solutions to meet your individual needs. Whether you have specific color requirements, complex designs, or challenging substrates, our experienced team is ready to deliver exceptional results. 💡 Contact us today to discuss your requirements, and let us develop a custom powder coating solution for you. 📞 Get in touch with us today!

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Ndjdpfxowc Afhs Afujb Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: new, Year of construction: 2025, power: 5 kW (6.80 HP), SAPI Premium 200-liter pressure blast machine with cyclone cleaner and abrasive vacuum for abrasive treatment. This blasting system provides a cost-effective, highly economical, and effective solution for open blasting work with semi-automatic abrasive recycling. Open blasting system for manual sandblasting of many different types of workpieces using a blaster with abrasive treatment. The abrasive is collected by hand after blasting and pushed into the collection hopper on the floor. The abrasive vacuum extracts the abrasive from the hopper and pulls it through the cyclone cleaner. The dust is extracted and collected in the dust container of the vacuum. Coarse particles are separated by a sieve. The cleaned abrasive falls back into the vented pressure blast pot and is available for reuse. Our SAPI safety shut-off ensures a safe and economical blasting process. The remote control allows you to start and stop the blast pot using a hand lever mounted on the blast hose package. Nedpfewc Rcnox Afujdb This is a highly economical and effective solution for open blasting operations with semi-automatic abrasive recycling. The scope of delivery includes: SAPI Premium 200-liter blast pot with 1 1/4" piping, pressure-regulated from 0.1 - 12 bar, max. operating pressure 12 bar High-performance 1 1/4" water separator, permanently installed on the unit SAPI safety shut-off device Cyclone cleaner for abrasive preparation with lifting device Abrasive sieve (inserted sieve in the blast pot hopper) Filling hopper 500x500x380 mm 4-meter connecting hose from the filling hopper to the cyclone cleaner 3-meter connecting hose from the cyclone cleaner to the abrasive vacuum cleaner Abrasive vacuum cleaner 5.5 kW, 400 V, 50 Hz with 70-liter dust container 10-meter blast hose package 25x7 mm, fully assembled with nozzle holder, hand lever, control line, and blast hose coupling Boron carbide Venturi long nozzle (diameter optionally 6 mm) mm, 8 mm or 10 mm)

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Njdpfewc Ri Iex Afuodb Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption Nedpfx Ajwc Rk Ejfuodb One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: new, Year of construction: 2025, Mobile Paint Container Take your painting process to the next level with mobile convenience. Mobile paint booths in a container design for painting and coating various objects. They are specifically designed for mobility, making them easy to transport and set up on different construction sites. The booth is typically equipped with a ventilation system to ensure air quality, lighting, and a filtration system to prevent paint overspray. The ventilation system ensures that fumes and particles released during painting are contained within the booth, preventing any danger to the surrounding area. Mobile paint booths are a practical and flexible solution for companies that need a portable and effective painting system that can be transported from one construction site to another. Design and Features Overview Our mobile 20-foot Sapi paint containers consist of a robust steel frame with welded wall and ceiling panels. We can add special equipment such as cranes or lifting devices inside. The floor is made of teardrop plate. Both door panels contain ventilation grilles fitted with fine-pored filter mats. One panel is designed as an emergency exit for safety reasons and features a viewing window. It's also worth mentioning that these aren't simply converted shipping containers! We manufacture all of our containers from scratch. We use only the most robust materials that meet our requirements and have also been safety-tested and proven. Conventional shipping containers would not meet the required safety standards. Paint extraction system in the mobile painting container The paint mist extraction panel for paint mist separation is located in front of the rear wall and is equipped with multi-layer filter mats. The extraction panel consists of a galvanized housing, folded with guide plates, including various suspension and fastening elements for the filter assembly. The powerful, explosion-proof extraction fan with drive motor is installed on a console in the rear wall area on the outside of the container. Next-generation mobile paint booths: Meeting EU requirements and advancing coating solutions The new generation of mobile paint booths must meet the highest EU requirements. The inclusion of new coating systems such as hydro-based paints, polyurethane resins, epoxy zinc dust, or epoxy iron mica paints places high demands on existing paint booths. Therefore, we have developed a new and unique mobile paint booth for the next generation of coating solutions. A key criterion is the transport of workpieces for painting and further processing steps. Whether it is dry paint mist separation or wet washing, air humidification or air drying, condensation drying using low-temperature processes or warm air drying, or whether workpiece pretreatment is carried out using high-pressure washing with water in a recirculating system, compressed air blasting, or wheel blasting technology. Ndedpfx Afswf Dmxoueb

Condition: new, Year of construction: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder composed of resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged so that it adheres evenly to the surface, forming a uniform coating. To achieve optimal adhesion and durability, the substrate is first thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for the powder to bond effectively to the substrate and achieve a strong and long-lasting coating. Ndsdpfx Aewf Dpgefusb A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It typically includes equipment such as powder pumps, feed hoses, and powder screens to transport the powder from storage to the spray gun. Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before the powder coating is applied. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure good adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature so that the powder coating can melt, flow, and cure into a durable finish. The oven typically consists of a conveyor system or racks to transport the coated parts through the oven chamber. Exhaust system An exhaust system will be installed in the facility to extract excess powder, fumes, or volatile compounds generated during the coating process. This system helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: SAPI Jumbo, pressure: 12 bar, total width: 3,087 mm, total height: 2,078 mm, total length: 3,692 mm, overall weight: 3,000 kg, inner dimension width: 2,340 mm, inner dimension length: 3,520 mm, inner dimension height: 2,500 mm, workpiece weight (max.): 500 kg, filter area: 20 m², Equipment: lighting, Efficient and Ready-to-Use JUMBO Blasting Cabin This fully assembled, walk-in JUMBO blasting cabin provides a comprehensive solution for efficient blasting operations. Equipped with two LED blasting lights, it ensures optimal illumination of the workspace. The double-wing door allows easy access and handling of larger workpieces, while the blast-resistant rubber lining on the walls protects the interior from wear and extends the cabin’s lifespan. For air filtration and dust reduction, the cabin features a high-performance cartridge filter and an impact separator, ensuring a clean working environment. The flat conveyor system in the floor, covered with a grated surface, enables the automatic return transport of the blasting media, while the electric drive unit for the conveyor system guarantees smooth operation. Additionally, the cabin is equipped with a bucket elevator and a high-performance abrasive recycling unit, allowing for efficient processing and reuse of blasting media. The 38-liter pressure blasting pot provides sufficient capacity for extended blasting cycles. The package also includes a 10-meter-long blasting hose and a durable boron carbide nozzle, ensuring optimal blasting performance. Ideal for Professional Blasting Operations Ndedoukdfpspfx Afueb This blasting cabin is the perfect solution for businesses that require a reliable and efficient system for blasting work. ✔ Custom features, such as loading trolleys, are also available upon request. ✔ Compressed air, electrical supply, and installation must be provided on-site. If you are interested or have any questions, feel free to contact us at any time!

Condition: new, SAPI high-performance injector blasting cabinet type "T-Rex 140 Double-Power" with integrated cartridge filter system. Combines pressure blasting and injector blasting in one blasting system. A blasting cabinet for all applications! The "T-Rex 140 Double-Power" pressure/injector blasting cabinet can be used either in pressure blasting or injector blasting mode. This allows for even the most difficult blasting work to be carried out. The also integrated injector blasting mode can be used for lighter blasting tasks, saving on expensive compressed air. The blasting mode (pressure blasting or injector blasting) is easily selected using a selector switch on the cabinet base. The compact, combined pressure/injector blasting cabinet has an integrated cartridge filter extraction system. Thanks to the permanently installed filter system, the sandblasting cabinet requires little space and is easily transported using a pallet truck or forklift. The compact design of the blasting cabinet makes it ready for immediate use; all that's required is to connect the compressed air and power supplies and fill it with abrasive. Ndjdpfxoupzmuo Afueb The integrated cartridge filter extraction system ensures optimal visibility in the blasting chamber. At the same time, optimal abrasive cleaning is achieved, allowing the blasting material to be reused as often as possible. The use of state-of-the-art fan technology results in an extremely low power consumption (0.75 kW), making the injector blasting cabinet extremely economical. Our high-performance injector blasting head (fresh blasting head) creates a high negative pressure and thus achieves high blasting performance, enabling fast, economical work with the vacuum blasting cabinet. The blasting nozzle is made of boron carbide and achieves extremely long service life, even when using corundum blasting media. The pressure blasting head is also equipped with a boron carbide blasting nozzle for maximum service life. A modern, energy-saving LED light is mounted on the cabin roof, protected from dust, to illuminate the blasting chamber. This ensures optimal illumination of the blasting chamber and enables fast, fatigue-free, and economical work. Our sandblasting cabinets are constructed from sturdy sheet steel, allowing for a high load-bearing capacity of the work grid. All SAPI blasting cabinets comply with all current safety standards and are equipped with a door safety switch that immediately stops the blasting process if the cabinet is opened during blasting. Metal blasting media, cast steel, steel grit, chilled cast iron, stainless steel blasting media, corundum, glass beads, plastic granules, vegetable granules, etc. can be used as blasting media.

Condition: new, functionality: fully functional, Year of construction: 2026, Dust Extraction System for Cabinet Sandblasting Machines The dust extraction system for cabinet sandblasting machines is a specialised extraction unit designed to improve visibility, cleanliness, and workplace safety during abrasive blasting operations. Equipped with a built-in 1100 W motor and an efficient filtration system, the unit ensures effective removal of contaminants from the working area. It is an essential component of every sandblasting cabinet, especially when used intensively in industrial environments. Main Advantages of the Machine 1100 W motor – provides high extraction performance while maintaining the unit's compact dimensions. Capacity of 3 m³/min – effectively removes dust and improves visibility inside the cabinet during operation. High-efficiency filter – captures fine dust particles, helping to protect the operator's health and improve the quality of the working environment. Stable construction – designed for operation with large sandblasting cabinets. Ndsdpfx Afjrh E Azeujb Compact dimensions – allow easy installation near the cabinet, even where space is limited. Construction and Technology The extractor is equipped with an efficient 230 V/50 Hz electric motor that generates a stable extraction airflow, essential during intensive sandblasting operations. The unit's housing is made of durable materials resistant to industrial conditions. The 310 x 170 mm filter effectively captures even fine dust particles, preventing them from being re-suspended in the air. The 52 mm inlet diameter ensures compatibility with most sandblasting cabinets. Precision and Work Efficiency Thanks to its high-efficiency filtration system, the extractor eliminates excessive dust accumulation inside the cabinet, which directly improves the precision of the abrasive blasting process. Improved visibility allows for more accurate cleaning of components and reduces processing time. Reducing the amount of airborne dust also helps extend the service life of other cabinet components, such as lighting systems and door seals. Applications The unit is recommended for use with sandblasting cabinets featuring a large working area, where significant amounts of dust are generated. It is suitable for repair workshops, metalworking shops, and industrial production facilities where regular sandblasting requires clean air to be maintained. The extractor is compatible with most cabinet sandblasting machine models; however, attention should be paid to the different mounting-hole spacing used on the KDP200, KDP200TOP, and KDP220TOP models. Standard Equipment Integrated 230 V electric motor High-efficiency filtration system Housing with wall-mounting bracket 52 mm diameter inlet Technical Specifications Specification Value Extraction power 1100 W Capacity 3 m³/min Power supply 230 V / 50 Hz Noise level 85 dB Inlet diameter 52 mm Handle length 280 mm Extractor dimensions (height × diameter) 730 × 260 mm Filter dimensions (height × diameter) 310 × 170 mm Weight 9.5 kg

Condition: good (used), Chamber volume: approx. 72 liters (usable volume) Heating capacity: 18 kW Internal dimensions (W x D x H): approx. 400 x 600 x 300 mm Temperature: 1,200 °C Ndjdjzwfwaepfx Afueb Controller: G 400

Condition: good (used), Paint casting machine, paint casting station -Paint casting machine Manufacturer: Bürkle -Max. pouring width: 1290 mm -Adjustable pouring gap: via handwheel with indicator -hydraulically: height adjustable Ndsdpfx Aec R Iyaofujb -without: paint pump -Dimensions: 2100/800/H1450 mm -Weight: 386 kg

Condition: used, Year of construction: 2003, functionality: fully functional, We offer this used Schlick sandblasting system, manufactured in 2003, for sale. It features a throwing wheel, a centrifugal wheel, and a pressure tank, as well as fully automatic sand filters and a conveying system. It also includes dust extraction and electronically controlled conveying wheels. The system is in very good working order. We offer professional dismantling and reassembly services within Switzerland at very favorable conditions. Nodpfx Aszbzwxsfuodb Year of manufacture: 2003 Factory number: 24/23717 Type: If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2012, functionality: fully functional, For sale is a complete, fully functional, and automated powder coating line for metal parts, complete with an automated process transport system. This is a ready-made solution for manufacturers of shelving, steel structures, warehouse equipment, and other metal components requiring high-quality paint coatings. The entire system is an integrated process that includes the transport of raw parts, surface preparation, powder coating, curing, and inter-process transport. The price includes: 1. Dismantling and reassembly of the line at a new location, including accommodation and meals for the technicians. 2. New insulation for the joints of the wall and roof panels, the furnace, and the floor. New bolts for the joints. 3. Sealants for the PP tunnel, connection of sections with tubs, and sections with sections. Njdpoz Azx Rsfx Afusdb

Condition: reconditioned (used), Year of construction: 2025, functionality: fully functional, total height: 4,000 mm, total length: 40,000 mm, total width: 6,000 mm, Equipment: documentation/manual, Automated nickel–chrome electroplating line for sale in Türkiye. The line was completely refurbished in 2025 and was operational before dismantling. All equipment is now dismantled and ready for loading. Njdpfx Asz Ei Ngefujdb The line has a reported coating surface area of 400–450 dm², a maximum rack load of 1,000 kg and a production capacity of 8,000 dm² per hour. Its installed footprint is 40 × 6 m (240 m²), with reported electricity consumption of 80 kWh per operating hour. The sale includes process tanks, filters, rectifiers, a hot-water boiler, a purified-water system and dosing pumps. The equipment list includes six 1,300 A nickel rectifiers, two 4,500 A chrome rectifiers and one 3,000 A rectifier for electrolytic degreasing. The buyer is responsible for transport and commissioning. A detailed equipment list and presentation are available upon request.

Condition: used, Year of construction: 2019, operating hours: 1,047 h, functionality: fully functional, total height: 4,085 mm, total length: 8,990 mm, total width: 4,140 mm, type of input current: three-phase, overall weight: 5,000 kg, inner dimension height: 3,500 mm, inner dimension length: 7,000 mm, suction capacity: 16,000 m³/h, inner dimension width: 4,000 mm, year of last overhaul: 2026, Equipment: cabin, documentation/manual, emergency stop, lighting, Technical Specifications Overall dimensions (including machinery): 8,990 × 4,140 × 4,085 mm Wall construction: 70 mm EPS insulation Door dimensions (W × H): 3,200 × 3,000 mm Exhaust wall dimensions (W × H): 4,000 × 2,000 mm Side wall lighting: 40 × 15 W LED lamps (720 W) Upper corner lighting: 40 × 15 W LED lamps (720 W) Exhaust airflow rate: Up to 16,000 m³/h Exhaust unit motor power: 7.5 kW Supply airflow rate: Up to 16,000 m³/h Ndjdpjz A Az Defx Afusb Supply unit motor power: 7.5 kW Heating system: Electric Heating capacity: 81 kW Heat recovery efficiency: 50% Total electrical power consumption: 97.44 kW Additional features: PLC control system Large touchscreen control panel Industry 4.0 compatible

Condition: good (used), Year of construction: 1988, Equipment: cabin, IEPCO Micropeen Peenmatic 1000 SK with tilting hood including filter tower, blasting guns, and operating manual Special features: - Tilting hood, opening angle approx. 70° - Heating system for drying the blasting media - Conveyor system for pre-acceleration of the blasting media - Pneumatic filter cleaning Nsdpfeyk Dm Isx Afujdb Working area (w x d x h): 800 x 800 x 840 mm Year of manufacture (estimated): 1988 Good, well-maintained condition, operating hours: 600 h Overall dimensions (without filter tower): 1800 x 1900 x 2000 mm Weight: 530 kg (blasting unit), 100 kg (filter tower) Sale only to entrepreneurs as defined in § 14 BGB.

Condition: good (used), Complete sandblasting system by Rösler, including manual blasting cabinet, blower, and extraction unit. Manufactured in 2010, in excellent technical condition. Dimensions: HxWxD approx. blasting cabinet 200 x 150 x 150 cm, weight 450 kg. Professional-grade equipment, which has been rarely used. Regularly maintained – in technically flawless condition. The machine can be inspected under power. Available from calendar week 22, 2026. Dismantling, removal, shipping, and reinstallation can be organized. If you have any questions, simply write or call: Maschinenhandel Nord, Gerstenstraße 2, 17034 Neubrandenburg All prices net plus 19% VAT. Subject to prior sale and errors. Ndedpoyx El Nsfx Afujb

Condition: ready for operation (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: 070079A, total height: 4,500 mm, total length: 5,400 mm, total width: 5,500 mm, pressure: 6 bar, control cabinet height: 2,000 mm, control cabinet length: 2,500 mm, control cabinet width: 500 mm, operating temperature: 25 °C, working height: 950 mm, heating capacity: 107 kW (145.48 HP), number of seats: 66, workpiece length (max.): 3,200 mm, workpiece width (max.): 1,350 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, emergency stop, Giardina drying oven, manufactured in 2007 with three different climate zones: evaporation zone - heating zone - drying zone Mobile pallets with conveyors, therefore no minimum size requirement for components Nsdpfxezcnu Hj Afuedb Continuous vertical conveyor system

Year of construction: 2015, condition: ready for operation (used), travel distance X-axis: 650 mm, number of axes: 3, This 3-axis FALCON FSG-3A1224H surface grinding machine was manufactured in 2015. It features handwheel graduations of 0.01 mm, 0.002 mm, and 0.2 mm for precise adjustments. The dedicated pendant control panel includes an emergency stop button and an analog meter for enhanced operational safety. If you are looking to get high-quality grinding capabilities, consider the FALCON FSG-3A1224H machine we have for sale. Contact us for further details. - Handwheel Graduations: 0.01 mm, 0.002 mm, 0.2 mm- Control Panel: Dedicated pendant control panel featuring an emergency stop button and an analog meter Nedjzu R Rtopfx Afuedb

Condition: like new (used), Year of construction: 2014, TWO-ZONE CONVEYOR FURNACE - BRAND: IKEO (Italy), year 2014 o “Mouth” dimensions: 80*35 o Belt speed: 0.1 to 3 m/min o Heating chamber dimensions: 80*35*1140 o Cooling chamber dimensions: 80*35*1525 o 1100°C with atmosphere control o Conveyor belt: thin stainless steel o Atmosphere: Nitrogen + H2 or Argon o Power: 25 Kw More photos and documents available upon request. This furnace will be available this summer. It can be inspected in Switzerland. PRICE: 40,000 Swiss Francs, loaded onto a truck. Ndjdszzdzrjpfx Afuob I remain at your disposal.

Condition: used, 328467, N 15/65HA, Nabertherm, muffle furnaces up to 650°C Ndjdpfxjur S I Io Afuob Model: 328467 Type: N 15/65HA Condition: Used

Condition: excellent (used), Year of construction: 2015, - Continuous flow, suspended part shot blasting system, specifically designed for automatic, continuous surface treatment of suspended workpieces. - Suitable for applications such as derusting, descaling, deburring, fine finishing, final shot blasting, or roughening. - Flexible workpiece suspension. - Efficient blasting technology through high-performance turbines. - Automatic continuous operation. - System dimensions: 12.75 x 6.6 x 10.42 m (W x H x L). Nsdpfx Afezvnnljusdb - Door opening dimensions: 2.0 x 2.0 m (W x H). - Workpiece dimensions: max. diameter 2,100 mm, max. height 2,100 mm, max. hook load 2,000 kg, max. part temperature 80 °C. - Abrasive: round F16-20. - High-performance turbines, type 3.6, quantity 06. - Impeller diameter 380 mm. - Blade width 55 mm. - Number of blades per turbine: 6. - Drive power per turbine: max. 11 kW.

Condition: new, total height: 31 mm, total length: 46 mm, total width: 37 mm, overall weight: 23 kg, HIGH-PRESSURE PAINT HEATER, ATEX COMPLIANT, VISCOUNT 2 - Brand: GRACO - REF. 245863 - 123 - Viscount 2 Graco, 220 V, 276 bar, 250°C, EEX compliant. Nodpfx Afozy U Sleusdb - Suitable for general industry, metal, and wood applications. - NEW, UNUSED PRODUCT - VAT not included.