Condition: excellent (used), functionality: fully functional, cutting length (max.): 2,050 mm, cutting width (max.): 680 mm, cutting height (max.): 60 mm, overall weight: 2,500 kg, total length: 3,300 mm, total width: 1,700 mm, total height: 1,500 mm, Hydraulic guillotine MONGUZZI tro 2050 Specification: • condition - used • manufacturer - MONGUZZI • model - TRO 2050 • max working width - 2050 mm Kedsvug U Eepfx Ab Teln • max working height - 60 mm • max width of the cut element - 680 mm • min width of the cut element - 37 mm • main engine power - 4.0 kW • start-up 0-1 • analog cutting width indicator • knife length - 215 cm • feed width - 211 cm • photocell protecting against putting hands under the knife • manufacturer's documentation and spare knives - used • weight - approx. 2,500 kg • dimensions - 330 x 170 x 150 cm (length x width x height) Additional information: • the machine is in perfect technical condition, ready to immediate use • the photos shown show the actual condition of the item for sale • the device can be switched on and checked on site. • the price given in the auction does not include VAT and transport costs

Condition: ready for operation (used), Year of construction: 1999, A dryer Cremona is available. Sections: 6, temperature zones: 2, cooling section: 1, width: 4200mm. Production capacity: approx. 80 sheets/min. Documentation available. An on-site inspection is possible. Kedpfx Aow I E Dpob Teln

Year of construction: 1999, condition: ready for operation (used), A veneer line Cremona is available. 1) Vertical cutter Cremona, year of manufacture: 1999, working width: 5400mm. Includes lifting device. 2) Dryer Cremona, year of manufacture: 1999, control: Siemens PLC, control year: 2019, working width: 5400mm, vacuum feed width: 5400mm, sections: 6, temperature zones: 2, cooling section: 1. Production capacity: approx. 70 sheets/min. Documentation available. An on-site inspection is possible. Kljdew I E Dvjpfx Ab Tsn

Condition: good (used), functionality: fully functional, with heating wire, Klsdpfx Abjyayzaj Tjn outreach 920 mm, material 0.4-2 mm, feed rate approx. 15 m/min, required space 1400 x 600 x 1600 mm, weight approx. 350 kg in good condition Price ex works Transport possible at extra cost!

Condition: ready for operation (used), Panel length: 3200mm, panel width: 1000mm, max. workpiece thickness: 38mm, min. infeed length: 500mm. Kljdpfx Abom Habdo Ten

Condition: refurbished (used), functionality: fully functional, pressing force: 120 t, Refurbished six-piston hydraulic flat press of Italian manufacture. Branded multi-daylight press for easy wood veneering. Veneer plate dimensions: 2500 x 1300 mm Large plate opening: 510 mm Pressure across full area: 3 kg/cm2 Total maximum pressure: 120 tons Number of hydraulic pistons: 4 MYLAR Teflon foil on plates Prepared for water heating of plates Option to install a hot water boiler The machine is refurbished, adjusted, and tested. Price: 7,600 EUR ex VAT Klsdpfx Asyi U Rnsb Tjn

Condition: good (used), Column projection 910 mm Feed approx. 15 m/min. constant Drive motor 0.18 kW Total connected load 0.45 kW Kjdpfx Absqwzfio Tsln You can call or write to us. We can speak and write German and Russian. You can also send messages in English 13.2.7.

Condition: ready for operation (used), Year of construction: 2004, This Josting ZFS 2800 veneer guillotine was manufactured in 2004. It features a cutting length of 2810 mm and an insertion height of 80 mm, suitable for a cutting range of 20 - 470 mm. Equipped with a light barrier safety device, swing-up protective gratings, and a telescreen positioning control for enhanced operational safety and precision. Consider the opportunity to buy this Josting ZFS 2800 veneer guillotine. Contact us for more information about this machine. Additional equipment • Light barrier safety device • Safety-oriented electric control • Swing-up protective gratings • Guide light as cut indicator • Telescreen positioning control • Fast table drive with swinging and drawing motion of knives • Simultaneous cuts of top and bottom knife • Automatic course of table, pressure bar, and knife movement • Intermittent operation of low noise drives precision hydraulic with 2 pressure stages and high-quality valves Klodpfx Aeyap Sneb Tjn Machine Benefits Technical Machine Benefits • Cutting length: 2810 mm • Insertion height: 80 mm • Cutting range: 20 - 470 mm • Drawing motion of knives: approximately 20° • Operating voltage: 400 v • Frequency: 50 cycles Extra Information Supplied with operating instructions Complete and ready for connection

Condition: ready for operation (used), Year of construction: 2025, pressing force: 122 t, This ITALPRESSE XL/6 30-13 PM BO veneer press was manufactured in 2025. Consider the opportunity to buy this ITALPRESSE XL/6 30-13 PM BO veneer press. Contact us for more information. Additional equipment • Mylar Foil Attached to Upper and Lower Press Plates • Electronic Flatness Control (EFC) for Incorrect Loading Protection Machine Benefits Technical Machine Benefits • Dimensions of heating plates: 3000 x 1300 mm • Number of heating plates: 2 pcs • Number of levels: 1 • Level opening: 370 mm • Max temperature of heating medium: 120°c • Working temperature: 70-90°c • Installed electrical heating power: 18 kw • Operating voltage: 400 v- 50hz- 3 ph Extra Information Features: Touch Screen SIEMENS 4.3 Inch TFT Klsdpfx Aoyan Sgjb Ten Digital Press Timer Digital Temperature Controller Digital Working Pressure Controller Day/Week Timer for Heating Switch-On Time Automatic Hydraulic Pressure Calculation Error Display and PLC Control Save and Recall up to 200 Work Programs Pre-Press Pressure and Time Settings Safety Devices: Two-Hand Release with Safety Circuit Safety Rip Cord around the Machine Safety Support for Lower Press Table Protective Plate for Rack/Gear Safety Instructions Sticker CE Standard Compliance CE Declaration of Conformity Special Processing of Solid Steel Heating Plate Surface Switching Off Left Cylinder Row

Condition: good (used), Year of construction: 1982, still well-preserved veneer saw with planer unit Kodjyizztepfx Ab Toln max. cutting length 3050 mm no rear stop included

Condition: used, Year of construction: 1985, Cutting length: 3100 mm Cutting height: Adjustable from 0-45 mm Saw unit: Powerful three-phase motor 220/380 volts, 1.8 kW power Clamping bar at the top with a handwheel Kedpfx Asvvkazeb Tjln Storage location: Nattheim

Condition: used, Material clamping via handwheel. Cutting length 3000 mm. Max. cutting height 60 mm. Storage location: Nattheim Ksdpfx Aevvkblsb Tsln

Condition: ready for operation (used), Year of construction: 2025, stroke length: 400 mm, This OMC PL 90s veneer press was manufactured in 2025. It features a plate size of 3000 x 1300 mm, an upward stroke of 400 mm, and a press force of 90 tons on 80% of the surface. Equipped with Elkom electronic heating plates, it ensures a maximum temperature of 120°C. The hydraulic system includes a two-stage unit with noise reduction and a fast closing/opening pump. Safety features include a safety cable, emergency button, and two-hand operation. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Kjdpfx Abeyalmbe Tsln • Plate size: 3000 x 1300 mm • Stroke type: upward stroke (from bottom to top) • Plate type: elkom electronic plates • Press force: 90 tons on 80% of the surface • Press cylinder: 6 x Ø 70 mm • Specific pressure: 2. 05 kg/cm² on 100% of the surface, 2. 56 kg/cm² on 80% of the surface • Loading and unloading side: 3000 mm • Heating system: electronic 25. 4 kw, maximum temperature of 120°c • Automatic opening with timer Extra Information Hydraulic System Two-stage unit with submersible pump for noise reduction and lubrication of rotating parts. Fast closing/opening pump (high flow rate - low pressure 35 l/min), press pump (low flow rate - high pressure 1.6 l/min). 2 HP Electric Motor Control/Safety Valves: Maximum pressure valve, pressure retention valve (check valve), valve for low drain pressure (pre-drain valve), and oil drain magnetic valve. Control Panel and Electrical System 2 Temperature regulators for setting the plate temperature Pressure gauge for pressure regulation with automatic pressure equalization system General on/off switch Two manual safety buttons for closing the press Timer for automatic opening Switch to select manual or automatic opening of the platens after the work cycle Off/on switch for upper and lower platen resistance Safety Systems Timed bimanual control for closing the press Safety rope on all four sides of the press Platen lock for maintenance Protective guards for the pinion and rack units Safety stickers and warning notices Operating and maintenance manual Complies with CE standards Press Structure Made of composite and welded steel Equipped with a rack and pinion guide system for perfect parallel movement during closing/opening of the plates. Elkom Heating Plate Electric plates with electric resistors Consist of a chipboard with an aluminum sheet mounting electric resistors Maximum Working Temperature: 120°C Maximum Thrust: 7 kg/cm²

Condition: ready for operation (used), Year of construction: 2019, This FORMAT4 HVP Typ 4 was manufactured in 2019. Designed for integration with existing heating systems, it can press at temperatures up to 90°C. The robust steel platen supports a maximum pressure of 5kg/cm², making it ideal for veneer processing. Consider the opportunity to buy this FORMAT4 HVP Typ 4 veneer press. Contact us for more information about this machine. Machine Benefits Ksdpfsx U Tv Iex Ab Teln Technical Machine Benefits • For connection to existing heating system / pressing temperature up to 90°c / the fabricated steel platen can take a maximum pressure of 5kg/cm²Plate: 110 X 240 cm, 120T, 5kg/cm2

Condition: excellent (used), Year of construction: 1989, operating hours: 7,398 h, functionality: fully functional, machine/vehicle number: 5/875, opening width: 400 mm, input voltage: 380 V, Types: LZT 90, machine number: 5/875, year of manufacture: 1989, press table: 2550X1300X400 mm, hours: 7398, 6-cylinder, anodized plates, power supply: 3/380V/50Hz Klodpeyhm U Aefx Ab Tsn

Condition: ready for operation (used), Year of construction: 1980, Mayer FS 3 Veneer saw Cutting length: 4000 mm Kledpfx Absyh It Rs Tsn Front and rear support tables Extraction duct

Condition: used, Year of construction: 1977, Max. pressing length: 2550 mm Klsdpeygm A Djfx Ab Ten Max. pressing width: 1200 mm Specific pressing pressure: 2.7 kg/cm² Total pressing pressure: 80 t Press opening width: 400 mm Heating plate material: gold anodised Operation: rotary switch Number of pressure pistons: 4 pcs Safety tear-off cable: Yes Condition of heating plate: good Weight approx.: 3600 kg Storage location:

Condition: good (used), Brand: Cremona Technical condition: Very good Technical details: Maximum log length: 2350 mm Minimum log length: 770 mm Maximum log diameter: 740 mm Kledsryxa Njpfx Ab Ten Maximum veneer thickness: 4 mm

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, cutting length (max.): 3,050 mm, LANGZAUNER VENEER SAW IN VERY GOOD CONDITION FOR SALE! AGE APPROX. 28 YEARS - CUTTING LENGTH: 3050 MM - REAR FORMAT TABLE - CUTTING WIDTH APPROX. 550 MM FRONT SUPPORT TABLE MANUALLY EXTENDABLE Klodpoxzzc Tofx Ab Tjn

Condition: used, Stack cutting machine, guillotine cutter, guillotine SCHNEIDER Type Senator 155 Rubber, paper and veneer shear, plastic shear, fabric shear Guillotine for paper, cardboard, rubber, wood, and veneer Paper shear, rubber shear, plastic shear, paper and veneer shear Machine no. 60178 Year of manufacture: 1968 Cutting length: 1550 mm Cutting height: approx. 125 mm Working height: 140 mm Back gauge: max. 1550 mm Motor power (blade drive): 5.5 kW Power supply: 380 Volt, 50 Hz - Two-hand operation for blade activation - Automatic pressing device holds the paper stack on the table - Manual clamp and blade activation via foot switch (operational) - Back gauge adjustment up to 1550 mm (can be adjusted manually via handwheel) - Retrofitted electric control not functional, without wiring diagrams, without user manual - Back gauge adjustment via servo motor (servo motor, controller, and control present, not functioning) Required space (L x W x H): 325 x 270 x 165 cm Space requirement for transport without disassembly: Length 330 cm x Width 270 cm x Height 175 cm Space requirement for transport with disassembly: Length 550 cm x Width 220 cm x Height 175 cm (machine + table separately) Kjdpfxjdzqnye Ab Teln Machine dimensions: Length 270 cm x Width 190 cm x Height 175 cm Back gauge table: Length 240 cm x Width 170 cm x Height 120 cm Weight of assembled machine: approx. 5000 kg (without transport steel plate) Good condition Ideal for cutting paper, cardboard, leather, cork, rubber, or fabric-reinforced rubber Sales price does not include the 20 mm steel plate on which the machine is placed in storage. (Price for the steel plate: EUR 900 net)

Condition: ready for operation (used), Complete Veneer production line. Capacity produced veneer: 8 to 10 m3 per hour Dimension veneer sheets: Length 2.62 m, Minimum width 0.5 meter Max diameter: 62 cm Max log length: 6 meter ( Longer logs if re-building the log intake ) Kljdpotryf Ijfx Ab Ton Main parts: - Logintake with debarker and butt-end reducer - Veneer peeling system - Dryer for veneer - Conveyor system for quality sorting with stacking units - Chippers for chipping off-cuts

Condition: excellent (used), functionality: fully functional, Thread splicer with glue Zigzag stitching Heater with air blowing Kledsxdw Azepfx Ab Ton Pedal control 380V power supply

Condition: used, used, good conditionmake Kupertype FWJ 900machine no. 18033834throat depth 900 mmthreadheating airmobilespace requirement approx. 1400 mm x 600 mm x 1600 mmweight approx. 350 kgstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Kjdevwfaxepfx Ab Teln

Condition: used, used manufactured by Kuper type Mini 420 range 420 mm thread Kodpsvwf Dwsfx Ab Tjln heating system electrical - new desk model required space ca. l x w x h mm 600 x 400 x 400 weight ca. 20 kg located in 97447 Gerolzhofen sale in current condition as seen - free on truck - without guarantee and guarantee

Condition: used, Machine cleaned, function tested, overhauled, adjusted, test run Various parts replaced: cover – discharge roller – pressure gauge – belt drive Kjdpfx Ajv Hhtysb Tsln used, good condition Make: Kuper Type: FWJ 900 Mach. No. 17063317 Projection 900 mm Air heating mobile Space required approx. 1300 mm x 600 mm x 1400 mm Storage location: 97447 Gerolzhofen, free on load, unpacked Handed over in the current condition as seen, without guarantee or warranty