Used Welding smoke suction for sale (168)

Year of construction: 2012, Condition: good (used), Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. The device is equipped with a pre-separator and a mechanical spark trap. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: Donaldson Torit Model: DFPRO 8-CYCLO Year of production - 2012 Donaldson Torit Ultra WEB OVAL patron filter cartridges - 8 pcs. Filtration area 143 m2 15 Kw fans. Capacity 8000 m3/h Vacuum 3800 Pa Inlet diameter - 400 mm We also offer on request new filter cartridges matched according to the purpose of the device. Deln Hk Rok D Exzersut Dimensions: height - 5.50 m length. - 3.30 m width - 1.70 m weight - 1700 kg

Condition: like new (used), Functionality: fully functional, Equipment: type plate available, Dust Hog Duster SG 801-100 dust extraction system in mint condition. The system was only used once for a test run; otherwise, it is unused and in excellent condition. Power: 1.5 kW Flow rate: max. 800 m³/h Pressure: 1,940 Pa Pneumatic filter cleaning Connection diameter: 200 mm Shipping available for €120. Delnsv Iyybj Hk Rrsut #8095

Condition: used, Year of construction: 2013, Technical details: weight of the machine approx.: 300 kg electrics - voltage/frequency: 400 / 50 bei 3~ V/Hz power consumption: 750 Watt dimensions L x W x H: 1,5 x 0,8 x 2,6 m Mobile compact filter unit with extraction arm. (Welding fume extraction and fume filtration). Range of application: MIG/MAG solid wire; various fume and dust applications. Duoln Hju Nv Afek Rrst incl. extraction nozzle manufacturer Lincoln, type LFA 4.1 CPL BJ 2013; tube Ø 200mm; suction Ø 280mm; total length=3900mm; the head is equipped with illumination via light switch, manual rotary head for locking flap, on/off switch gas temperature 40°C / 100°F Suction capacity approx. 2000m³ mobile over 4 wheels, front braked *

Condition: used, Year of construction: 1988, Welding fume extractor Fabr.ESTA Type:SRF - 2000 Year 1988 Deln Hkeu Hlppj Rrjut Ready for use.

Condition: used, Technical data: Speed: 3,000 rpm Duslevygrzsn Hk Rrot Operating point: approx. 18,000 Bm3/h at 4,200 Pa. Motor: 30 kW, IP 54 Frequency: 50 Hz Voltage: 400/690 V Type: ESTA MDV-30 kW Equipment: - Medium pressure fan MDV-30 kW - Control FU extension - Frequency converter 30 kW, IP 55 - Summer/winter switchover

Condition: new, Year of construction: 2007, Functionality: fully functional, type of input current: three-phase, input voltage: 400 V, volume flow: 10,000 m³/h, filter area: 5.4 m², nominal current: 14 A, frequency: 50 Hz, Never used Duelnsvd A H Nj Hk Rrst

Condition: good (used), Welding fume extractor,dust extractor,self-cleaning filter,pneumatic,vacuum brand Keller Lufttechnik For welding,grinding,sandblasting and all kinds of dry dust. Delnsim R Uks Hk Rrsut Cartridge filter cartridge. Filter cleaned pneumatically with compressed air pulses 3 Kw fan Capacity 2500 m3/h Inlet diameter - 250 mm

Condition: used, Extraction capacity of the unit: 182 m³/h with 5 m air hose 45 Ø: 159 m³/h Filter surface: 9,6 m² electr. connection: alternating current 220 V weight: 20 kg Space requirement: 850 x 330 x 450 mm Duslnjb Nv S Eo Hk Rrjt

Condition: used, Year of construction: 1990, Technical details: total power requirement: 1,5 kw weight of the machine approx.: 110 kg electrics - voltage/frequency: 380 / 50Hz V/Hz dimensions L x W x H: 1,0 x 0,55 x 2,4 m Application: for welding and dust air with filtration Air inlet: pipe connection Ø 150 x 60mm; intake flexible pipe 2-sectioned Exhaust air: flexible hose Ø 150mm to approx. 5 meters Duslneu Nv Dpj Hk Rrst Operation via on/off switch *

Condition: good (used), Dust extraction,welding fume extractor,self-cleaning,pneumatic,vacuum filter KELLER Uni-Star XK. For plasma,laser,sandblasting,sodding and all kinds of dry dust. The fan is placed behind the filter on the clean side which reduces the risk of explosion initiation to a minimum. Fan with a power of 1.8 Kw Duoln Hsivtqbjk Rrst Panel filter cartridges of the "Multituba" type Capacity 800 m3/h

Condition: used, machine/vehicle number: 1980 100 175, Max. volume flow: 220 m³/h Pressure max. 22000 Pa electr. connection: 230 V weight: 16,5 kg Delneb Nv S So Hk Rrjut Space requirement: 720 x 320 x 410 mm

Condition: used, Year of construction: 1988, Technical details: intake capacity: 1200 m³/h aspiration hole diameter: 230 mm total power requirement: 1,1 kW weight of the machine ca.: 110 kg dimensions of the machine ca.: 1,2x0,7x2,0 m Dusln Hksu Nwite Rrst mobile compact filtering device with suction arm length = 2800mm ( suction diameter 230mm) (tube dia160mm). 3 chamber fitering system application: smoke-and dust, such as welding smoke and skome filtration test run has been proceeded succesfully *

Condition: excellent (used), Year of construction: 2019, suction capacity: 1,100 m³/h, negative pressure: 3,200 Pa, Mobile welding fume extraction, dust extraction, self-cleaning, pneumatic, vacuum filter from KEMPER. For welding, grinding and all types of dry dust. Self-cleaning welding fume filter with contamination-free dust collection. The mobile KEMPER MaxiFil Clean cartridge filter is designed for continuous operation for the filtration of welding fumes and highly concentrated dust. Dusljtq E Sijn Hk Rrst Suitable for use with all welding methods for carbon, low-alloy and high-alloy steels and aluminium. Economical in operation thanks to the long service life of the filter element. Thanks to the IFA-W3 approval, the basic filter can be used for welding high-alloy steels. Parameters: Efficiency - 1100 m3/h Max negative pressure 3200 Pa Three-phase fan with a power of 1.5 Kw Filtration surface - 15 m2 Year of production - 2019 Patron Filter Insert with PTFE membrane Purification degree - > 99.97 % Preliminary spark separator. Built-in delay time regulator in start-stop mode. In the case of connecting a start-stop sensor (optional), the delay time of extraction after the welding process can be set to 5-60 seconds The device is in very good condition. Several pieces available. The price in the advertisement is for 1 piece.

Year of construction: 1991, Condition: ready for operation (used), machine/vehicle number: 004744, extraction capacity: 1200 m³ / h Delnofm Ekxe Hk Rrsut drive: 0.75 kW space requirement: 700 x 660 x 1030 mm

Condition: used, Technical details: filter cartridge type: Stahlwolle filter surface area: 450 x 450 mm weight of the machine approx.: 95 kg dimension machine xH: 0,55 x 0,9 x 0,83 m Dust mist suction and filter - Oil mist extraction system -suction Ø 300 x 90mm right side Duolnju Nv Are Hk Rrjt -exhaust air 430 x 300mm ceiling side -2x condensate drain 1 1/4" (blind plug) *

Condition: used, Year of construction: 2009, suction capacity: 16,000 m³/h, negative pressure: 2,500 Pa, Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. Fan on the clean side, which reduces the risk of explosion to a minimum. 15 Kw fan Capacity 16000 m3/h Vacuum 2500 Pa Filter cartridges - 13 pieces. Filtration area 260m2 Doln Hk Rork Itcsreut Inlet diameter - 2x 560 mm Year of production - 2009 Dimensions of the device: height - 2.70m width - 5.70m x 1.85m weight - 2600kg

Condition: used, filter area: 252 m², suction capacity: 12,000 m³/h, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Filter cleaned with compressed air pulses during operation, which ensures high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Parameters: Efficiency - 12000 m3/h Filtration area 252 m2 Cartridge filter inserts - 12 pcs. 15 kW engine Dsln Hevzy Irek Rrout inlet diameter - 500 mm Dimensions: height - 3.65 m width - 2.10 m depth - 2.10 m fan: 1.75 m x 1.50 m height 1.45 m stock no.: 0948

Condition: excellent (used), Year of construction: 2017, operating hours: 463 h, suction capacity: 5,000 m³/h, negative pressure: 3,100 Pa, IVAT Air-Tower 5000 K filter ventilation tower Filter ventilation of industrial welding halls - numerous technological processes in production plants, mainly carried out in metalworking. Suction from the top and draft-free exhaust from the bottom - exactly to the workplace. The principle of layered filter ventilation, the device does not require the installation of pipelines. Cartridge filter inserts - self-cleaning by means of compressed air pulses during operation. Filter cleaning by means of pressure difference - no loss of compressed air. Dsln Hkevzamhj Rrout The principle of layered ventilation: contaminated air is sucked in from the top, filtered and then released at floor level as clean air suitable for breathing without generating drafts, at a speed below 1.2 m/s. Exactly where employees inhale it. And this in a wide range of 270 degrees. The tower operates in accordance with the principle of layered ventilation, recommended by trade unions and considered the best type of air circulation. Year of production 2017 Working hours: 463 h Parameters: Fan with a power of 3 kW. Built-in frequency converter. Efficiency 2500 m3/h - 5000 m3/h Max negative pressure 3100 Pa Filter inserts: 2 pieces Dust drawer with a capacity of 17 l. Very quiet operation 75 dB (A) Degree of purification - > 99.9 % The device is in very good technical condition.

Year of construction: 1996, Condition: used, Dust extraction,welding fume extractor,self-cleaning filter,cartridge filter for plasma,laser,sandblasting,shotblasting The filter is cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: STURM Model: 3-7x20/140 DLR P Year of production 1996 Engine power 7.5 Kw Capacity 4200 m3/h Inlet diameter - 200 mm Cartridge filter cartridges - 7 pieces. Duoln Heif Rlujk Rret Filtration area 140 m2 Complete with electrical diagram and partial piping

Condition: used, operating hours: 903 h, Mobile welding fume extraction station. Dust extraction, self-cleaning filter, pneumatic, vacuum NEDERMAN FILTERBOX 663 Device with pneumatic and electric filter cleaning. Dsln Hk Rjvygz Asrout Can be used for continuous operation and for occasional welding processes. Only 900 hours worked. 1.5 kW fan placed on the clean side. Three-phase motor Noise silencer 4 m long extraction arm. Stock no.: 0952

Condition: good (used), Mobile station welding fume extractor.dust extractor,filter ESTA SRF K-10 Dusln Helqw Igsk Rrjt Fan of 1.3 Kw (230V) located on the clean side. Extraction arm with a range of 2 m. Capacity 950 m3/h. Vacuum pressure of 2800 Pa. The SRF K series is designed for extraction and filtration of welding fumes and light grinding dust. It is an excellent solution to the problem of welding fumes and other dust pollution. Welding or soldering fumes are filtered with a filtration efficiency of 99.9%. The high airflow rate can even pull out large clouds of smoke. Automatic filter cleaning manually activated - after finishing work, connect the compressed air line to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through a rotary nozzle, which significantly extends the life of the cartridge. During welding, the device does not need to be connected to the compressed air network and thus remains mobile.

Condition: good (used), Year of construction: 2016, operating hours: 5,268 h, suction capacity: 4,000 m³/h, negative pressure: 3,000 Pa, Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. Brand: TEKA Model: Filtercube 2H Year of manufacture: 2016 operating hours: 5268 Filter cleaned by microprocessor controller with compressed air pulses during operation by which high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" Doln Hkstpvcye Rreut The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: Sound-insulated fan with a power of 3 Kw. Capacity 4000 m3/h Vacuum pressure 3000 Pa Inlet diameter : 315 mm Filtration area: 50 m2 control cabinet technical documentation Possibility of ordering new filter cartridges tailored to the customer's needs.

Year of construction: 2023, Condition: new, Welding fume extraction, welding fume extraction, self-cleaning filter, pneumatic, vacuum. STAN 1000 is designed for extraction and cleaning of air from dry dust during welding, grinding, polishing, casting and cutting of metals and plastics. STAN 1000 is equipped with a three-stage filter system with integrated regeneration system for the main cartridge. The contaminated air is cleaned by a metal pre-filter (spark arrestor), a cartridge main filter and an outlet cartridge made of non-woven fabric impregnated with activated carbon. The main cartridge regeneration system, which uses compressed air to clean the cartridge filter from accumulated impurities, has its own compressed air tank with a capacity of 10 liters. STAN 1000 is recommended for tasks that require continuous extraction and filtration of air contaminants. As a supplement to the Stan 1000, the Oskar 160 extraction arms with a reach of 3 m. or 4 m. are recommended. The model STAN 1000 EC shown in the pictures has: Fan with brushless EC motor and 0.78 kW inverter, soundproofed. Air volume : 1000 m3/h Automatic cleaning of the filter cartridge Self-supporting tube exhaust arm L=3.0m, D=160mm, hood 315mm Three filter stages: - Coarse 30 % metal pre-filter (G2). - Filter cartridge with 99 % efficiency for particles ≥ 0.5 μm - Outlet filter impregnated with coarse 70 % activated carbon (G4) Filter cartridge with PTFE membrane in filter class F9 Coarse waste drawer under the pre-filter Grate and dust bin under the main filter Welded housing made of powder coated steel Sound pressure level: 64 dB(A) Delenabuzon Hk Rreut Possibility to choose different configurations tailored to the needs of the customer. Polish product. The indicated price is the price of the presented model. Mechanical warranty for the device: 12 months

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse Doln Hjrhidmok Rrsut swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Year of construction: 1999, Condition: good (used), DISA dust extraction, welding fume extraction, self-cleaning cartridge filters, pneumatic filters, vacuum filters for plasma, laser, sandblasting, soda blasting, shot blasting, plastics and catalysts, mineral processes and all kinds of dry dust. The filter is cleaned pneumatically with compressed air impulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Highly durable filter cartridges resistant to moisture. Aluminized, antistatic, operating temperature up to 135 degrees celsius. Dusln Hk Rshqd Tvoret Fan power 11 Kw Efficiency up to 8000 m3/h. Vacuum up to 4300 Pa Filtration surface 128 m2