Used Drill Bit Sharpening Jig for sale (5,698)

Condition: new, bore capacity in steel (diameter) 35,0 mm bore capacity in cast iron 40,0 mm throat 320 mm threading M 24 in Stahl morse taper 4 MK bore stroke 160 mm turning speeds 65 - 3250 U/min table: 500 x 420 mm throat 320 mm weight 375 kg range L-W-H 600 x 870 x 2.170 mm Furnishing: - Infinitely variable speed, ideal for - Set the desired cutting speed. - Automatic tool ejector and thread cutting device as standard - Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev - Solid gray cast iron table with rotating and swiveling support surface - T-slots in the machine base enable high workpieces to be clamped - Guaranteed concentricity 0.02 mm, measured in the quill - Hardened and ground gears ensure smooth running - Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, MT 4/2 - coolant device - Thread cutting device - Electromagnetic spindle feed Kwjdpfxexaabre Ab Tju - Automatic tool ejector - LED machine light - First filling with Shell Tellus 46 - Digital speed display - Height-adjustable protective cover

Condition: new, bore capacity in steel (diameter) 32,0 mm throat 230 mm bore stroke 120 mm morse taper 3 MK table: 400x320 mm turning speeds 105 - 1725 U/min total power requirement 1,2 kW weight 245 kg range L-W-H 470x810x1710 mm Furnishing: - Compact, stable cast iron construction in a modern design - Infinitely variable speed control - is changed The speed is read on a digital display - Table height adjustment via rack and crank Kodpfx Abew U U N Ie Tewu - Right and left rotation of the quill for thread cutting - Powerful 2-stage motor, speed range from 105 - 1725 rpm - Base plate with T-slots for clamping high workpieces - Safety switch with undervoltage release - The spindle runs in the precision ball bearing scope of delivery - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MK 3/2 - Digital speed display - LED machine light - Height-adjustable protective cover

Condition: good (used), Year of construction: 1996, GILLARDON GB 40 V Kodpfxjylygms Ab Tjwu Drilling capacity in ST 60: 40 mm Drilling capacity in GG 20: 50 mm Maximum drilling diameter in ST 60: 55 mm Right/left-hand rotation Thread cutting device Coolant system MK 4 taper Stepless spindle speeds: 140 - 1100 rpm 3 automatic feeds: 0.1; 0.16; 0.25 mm/rev Distance table/spindle: 135 - 760 mm Distance table/baseplate: 1200 mm Table dimensions: 630 x 530 mm External dimensions approx.: 630 x 985 x 2020 mm with - Stepless speed adjustment - 3 automatic feeds

Condition: new, drill diameter 2.0 - 20.0 mm lip angle 90 - 135 ° turning speeds 4800 U/min voltage 230 Volt engine output 0.12 kW weight 8.6 kg range L-W-H 285 x 130 x 170 mm The handy DG 20 M drill grinding machine is ideal for grinding twist drills made of HSS, cobalt and hard metal. Thanks to the adjustable tip angle of 90° to 135°, this model can be used universally for 2-edged twist drills. Properties: - For grinding HSS and hard metal twist drills from 2 - 20 mm - ER 20 and ER 25 collets also enable clamping of intermediate sizes - Optimum grinding result thanks to the specially guided collet - Includes device for sharpening the drill tip - Universally adjustable tip angle from 90° - 135° - Fast and easy grinding process Scope of delivery: - CBN grinding wheel - ER 20 collets, 3 - 12 mm * 11 pieces (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 /12 / 13 mm) - ER 25 collets, 14 - 20 mm * 7 pieces (14 / 15 / 16 / 17 / 18 / 19 / 20 mm) Kwjdpfx Asxablxjb Teu - Collet holder ER 20 or ER 25

Condition: used, Year of construction: 2007, bore capacity in steel (diameter) 25.0 / 30.0 mm throat 150 mm bore stroke 120 mm threading M18 / M22 spindle taper 3 MK table: 300 x 270 mm turning speeds 200 - 4.000 U/min column diameter 100 mm total power requirement 0.75 / 1.1 kW weight 170 kg range L-W-H 800 x 500 x 1400 mm from a training workshop (!!) New price approx. 4.700 euros Furnishing: - robust bench drill with V-belt drive - Clamp / relax using a quick release lever Kwsdpfx Aexaamzob Tsu - stepless speed adjustment - digital speed display - EMERGENCY OFF push button at the front - stable feed handle - stable quill for tool mounting - Thread cutting device - Right / left running of the work spindle - Pole changing motor - manual spindle feed - Height-adjustable work table, using a hand crank - adjustable drilling depth stop

Condition: used, Year of construction: 2015, total height: 1,850 mm, total length: 2,300 mm, total width: 1,950 mm, Empty weight: 1.240 kg Kwsdpfx Aexhchdeb Tsu - Year: 2015 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/222595 - Voltage [V]: 400 - Current consumption [A]: 10 - Transport dimensions: 2300mm x 1950mm x 1850mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2016, total height: 2,350 mm, total length: 4,300 mm, total width: 1,880 mm, Empty weight: 1.310 kg - Year: 2016 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/226310 - Transport dimensions: 4300mm x 1880mm x 2350mm (l x w x h) - Transport weight [kg]: 1310kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Kwodpfsxy Rk Rsx Ab Tsu Glenn Smeets

Condition: excellent (used), Year of construction: 2014, bore capacity in steel (diameter) 45 mm arm length 1050 mm Vertikal stroke 450 mm Kodpsx Szp Refx Ab Tjwu quill stroke 200 mm spindle taper MK 4 spindle turning speed range 15 - 2800 U/min transmission ratio 2 distance spindle /table 710 mm weight of the machine ca. 2600 kg dimensions of the machine ca. 3000 x 3000 x 3220 mm This DONAU FLEX 145 radial drilling machine is in very good, as-new condition and has only 97 operating hours. The machine is available immediately.

Condition: good (used), Year of construction: 2000, machine/vehicle number: 152362081, functionality: fully functional, throat depth: 2,700 mm, spindle diameter: 110 mm, sheet thickness steel (max.): 100 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 9 rpm, Radial drilling machine MAS U 1000 Year of construction 2000 Kedperwxpfefx Ab Tewu Conventional / digital control With face plate 1,000 mm and tool package Viewing is possible at any time by arrangement. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Radial drilling machine MAS | MAS1000 | U1000

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg Kwjdpfxsu Tln Ne Ab Tju good condition

Condition: excellent (used), Year of construction: 1991, Drilling diameter in St 60/GG 20: 28/32 mm Kodpfsyk T A Eex Ab Towu Spindle taper: MT 3 Throat: 250 mm Spindle stroke: 120 mm Table size: 400 x 415 mm Maximum distance between table and quill: 665 mm Spindle speeds: 140 - 2000 rpm Drive motor: 380 V, 1.1/1.3 kW Weight: 210 kg Space requirements: 800 x 420/600 x 1790 mm

Condition: new, BRAND NEW MACHINE Ksdpfxsq I Ncqe Ab Tewu HEIDENHAIN TNC 640 Digital Path Control HEIDENHAIN TFT 19" Screen HEIDENHAIN Package (motors, measuring systems, and handwheel) X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 1,500 mm Rotary Table: 1,600 x 1,200 mm Maximum Workpiece Weight: 6,000 kg Automatic Universal Diagonal Swivel Head 1° x 1° (Optionally with fixed quill Ø 210mm) Spindle Taper: SK-50 DIN 69871/A Max. Spindle Speed: 6,000 rpm (oil-cooled) Max. Spindle Motor Power: 53 kW ICS – Internal Coolant Supply – 36 bar Rapid Traverse X, Y, Z: 30 m/min Positioning Accuracy: 0.015 mm Repeatability: 0.010 mm Chain Tool Changer: 40 positions (vertical / horizontal change) 2 x Longitudinal Hinged Belt Chip Conveyors Perimetric Enclosure (open top) Only inquiries from Germany will be answered.

Condition: new, BRAND NEW T-TYPE FLOOR BORING AND MILLING MACHINE HEIDENHAIN TNC 640 Digital Path Control HEIDENHAIN Package (motors, measuring systems, and handwheel) X-axis: 4,000 mm Z-axis: 1,500 mm Y-axis (cross ram): 1,300 mm V-axis (column traverse): 1,000 mm Rotary Table (C-axis): 2,000 x 2,000 mm Max. table load capacity up to 15,000 kg Automatic universal 1° x 1° swivel head (optionally with fixed quill Ø 210 mm) Spindle taper: SK50 DIN 69871/A Spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW ICS – internal coolant supply – 36 bar Rapid traverse X, Y, V, Z: 30 m/min Positioning accuracy: 0.020 mm Repeatability: 0.010 mm Chain-type tool changer: 60 stations (vertical / horizontal change) Double hinged belt chip conveyor (longitudinal) Perimeter guarding (open top) Kwodpfxoq I Nkbj Ab Tou Only inquiries from Germany will be answered.

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,500 mm, table load: 8,000 kg, spindle diameter: 110 mm, spindle speed (max.): 3,000 rpm, table length: 1,600 mm, table width: 1,440 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 12,000 m/min, feed rate Z-axis: 12,000 m/min, travel distance W-axis: 500 mm, workpiece weight (max.): 8,000 kg, quill travel distance: 500 mm, quill diameter: 110 mm, overall weight: 25,000 kg, Equipment: rotational speed infinitely variable, BRAND NEW BORING MILL (T-CONSTRUCTION) Controls and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN package: motors, measuring systems, and handwheel IKZ: Internal coolant supply, 20 bar Additional Equipment: Chain-type tool changer with double gripper, 60 positions Double hinge belt chip conveyor (longitudinal), one at the front and one at the rear Kjdpfsxc Hphex Ab Tjwu Perimetric enclosure Spindle support bearing 250mm Hinged belt chip conveyor RENISHAW RMP 60 touch probe Only inquiries from Germany will be answered.

Condition: new, FACTORY NEW T-TYPE FLOOR BORING AND MILLING MACHINE Control and Drive Technology: HEIDENHAIN TNC 640 digital CNC path control HEIDENHAIN 16" TFT screen Kedpfx Absq I Nlye Tswu HEIDENHAIN package (drive motors, measuring systems, HR 510 handwheel) X-axis: 4,000 mm Z-axis: 2,000 mm Y-axis (cross ram): 1,500 mm V-axis (cross rail): 1,000 mm Rotary table (C-axis): 2,195 x 2,195 mm Max. load capacity up to 20,000 kg Automatic universal swiveling head 1° x 1° (optional with fixed quill Ø 210 mm) Spindle taper: SK50 DIN 69871/A Spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW ICS – internal coolant supply – 36 bar Rapid traverses X, Y, V, Z: 30 m/min Positioning accuracy: 0.020 mm Repeatability: 0.010 mm Chain tool changer: 60 stations (vertical / horizontal change) Double hinged belt chip conveyor (longitudinal) Perimetric enclosure (open top) Only inquiries from Germany will be processed.

Condition: good (used), functionality: fully functional, throat depth: 180 mm, overall weight: 65 kg, spindle speed (min.): 480 rpm, Bench Drill Manufacturer: IXION Model: BT 13 Technical Data: Manufacturer: IXION Model: BT 13 Year of manufacture: Spindle speeds: 480 – 850 – 1400 – 2300 – 4000 rpm Drilling capacity: max. 13 mm in steel Table size (base): 230 x 170 mm Swivel table: 230 x 170 mm Drilling depth: 70 mm Tool holder: B 16 or MK 2 Throat depth: 180 mm T-slots: 10 mm Power: 1.5 kW Weight: 65 kg Dimensions: L 0.4 x W 0.5 x H 0.855 m All information subject to change and without guarantee. Kwsdpfx Ajw Ug Dqob Tsu A powered demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2011, Technical details: bore capacity in steel (diameter): 35 mm throat: 350 mm bore stroke: 180 mm threading: ST M 24 mm spindle taper MT: MK4 spindle speed:: 50 - 1450 U/min Distance spindle/table max.: 780 mm table clamping surface:: 560 x 560 mm Kwedpfeyli Sfox Ab Teu weight of the machine ca.: 500 kg dimension machine xH: 0,73 x 0,56 x 0,22 m

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light Kjdpfelhwr Rox Ab Tewu - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Kodpfx Aboylnpij Towu Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Condition: new, Year of construction: 2026, machine/vehicle number: PRJ069841, ALZMETALL Bench Drill Machine Drilling capacity in steel 14mm Short taper spindle MK2, spindle stroke: 80mm, throat: 190mm, column diameter: 65mm, machine table usable surface: 300x240mm, with T-slots 2 x 12mm x 80mm, spindle-table distance min. / max. 75/357mm, machine table height adjustment by hand crank, machine base plate, usable surface: 300x240mm, with T-slots 2 x 12mm x 80mm, spindle-base plate distance min. / max. 437/437mm, manual feed, machine height without options: 825mm, net weight: 83 kg. - Stepless speed adjustment 230–4000 rpm Standard equipment: Kedslub Htopfx Ab Tewu 5" TFT LCD display with touch function: manual input for target spindle speed, actual speed indicator, integrated drilling depth display with touch zero reset, virtual drilling depth scale on display, machine status and warning messages on display, service information, selectable operating languages DE/EN/FR/ES/IT/NL/RU Single-phase motor 230 Volt, 50 Hz, plug pre-installed, cable length 2m, three separate pushbuttons for forward - reverse - stop, spindle lock with brake function, spindle guard with electrical interlock, lockable main switch, mushroom-head emergency-stop button (latching), stepless speed adjustment via potentiometer, protection class IP54, spindle guard with electrical interlock, finish: DD-structured paint signal white RAL 9003, PANTONE 7545c, black Delivery time: ex stock Waiblingen Beinstein

Condition: excellent (used), Professional drill chuck with SK40 / ISO40 taper, compliant with DIN 69871 A standard. Manufacturer: EROGLU Präzisionswerkzeuge (Germany) – high-precision manufacturing. Model: 03180PB05553 (3/16-IK). Maximum tightening torque: 20 Nm – ideal for drilling and tapping with controlled force. Version with internal cooling (IK – Innenkühlung). Chuck with torque adjustment + / –, allowing protection of tools and workpieces. Solid and durable industrial design – suitable for use in CNC machining centers and conventional machines. Condition: used, in very good technical condition – ready for immediate use. ✅ German quality – precision industrial-grade drill chuck ✅ Ideal for production and workshop applications. Kwsdexlcz Sopfx Ab Teu

Condition: ready for operation (used), Year of construction: 2010, This Hüttenhölscher Drilling line was manufactured in 2010. It features a PC-controlled function sequence under Windows 7, TwinCAT, and a used drilling system with a 6-station loading gantry. The rig includes a 2-axis gantry robot, Y/Z axes with servo motors, and a travel distance of Y-axis 8500 mm, Z-axis 1500 mm. It also has a suction crossbeam with a four-circuit vacuum supply. Contact us for more information about this machine. • Used drilling system consisting of a 6-station loading gantry • 2-axis gantry robot • Y/Z axes with servo motors • Travel distances: Y-axis 8500 mm, Z-axis 1500 mm • Suction crossbeam with four-circuit vacuum supply • Vacuum generation by means of ejector • Length: 300 - 2250 mm • Width: 350 - 710 mm • Thickness: 16 - 25 mm • Stack height: Max. 1000 mm (60 parts) including protective plate • Drilling gear: Two 16-spindle drilling gears • Callable spindles: 8000 rpm • Groove saw (support 1) for cutting special rear wall grooves • Sawing unit with tool holder, speed control via frequency converter • 2x milling spindles right/left at front edge (support 1) • Base frame as welded construction with machined screw-on surfaces • Support can be moved in the X direction by means of a servomotor • Drilling gear a=32 mm, adjustable with frequency converter, drill chuck Ø 10h7 with grub screw • 4 stacking stations • 1 hand rest station / automatic - manual feeding • 1 removal station / automatic - manual removal • Floor roller conveyor / stack feed • 4 roller conveyor lines: 930 mm wide x 3600 mm long • AH 300 mm • Feeding / removal: manual cross transfer carriage • Transport section: 950 mm wide x 4100 mm long • Integrated side stop • Manual feeding • Toothed belt section: 900 mm wide x 2500 mm long • Pneumatic lift for toothed belt conveyors Kjdox Tkauopfx Ab Tjwu • Pneumatic double clamping cylinders, controlled by ball screw and servo motor • Drilling gear a=32 mm, adjustable with frequency converter • Pneumatically pilot-controlled working position • Transfer shuttle: Toothed belt section 900 mm wide x 2500 mm long • Return transport section: 950 mm wide x 4000 mm long • Pneumatic stopper • Horizontal stroke approx. 2500 mm by means of three-phase motor • Rotation by three-phase motor by +/- 90° • Discharge stations / automatic removal • Positioning of cabinet parts by encoder • Protective system for feeding • 45 m protective fence with 3 access doors • 2 sliding doors for feeding the floor roller conveyors

Condition: new, The KB 32 SFV PRO is a high-performance Column Drilling Machine from KNUTH, designed to deliver precision and efficiency for various drilling applications. This robust drill press features an automatic feed system and is particularly well-suited for single part productions and manual series work in both workshops and industrial settings. Made from premium high-quality cast iron, the sturdy base, column, table, and gear head ensure excellent rigidity and durability. The heavy, precision-ground work table is equipped with T-slots for optimal setup versatility. With an infinitely variable drive that boasts low maintenance, the KB 32 SFV PRO is complemented by a convenient touchscreen control panel. Operators can easily access functions such as spindle speed control and an electronically controlled quill feed. The integrated coolant system enhances performance, while the standard LED work light ensures optimal visibility. Experience the reliability of this drill press and enhance your operations—request a quote today to add the KB 32 SFV PRO to your drilling equipment lineup in the Column Drilling Machines category. Kwedpfx Aouyh Unob Tou

Condition: new, Year of construction: 2026, Width of the band swa blades 50-200 mm Sharpening pitch 60 mm Weight 750 kg WINTER CNC BAND SAW GRINDER BANDSAWMAX PNK-CNC PNK-CNC is designed to grind all types of band saw blades used in metal cutting. PNK-CNC guarantees a flawless, fast and precise grinding of NU, NV, PV, PU, KV, SB tooth forms with its state-of-the-art grinding technology Technical specifications: - Band saw width 50-200mm - Band saw length Max. 12m - Blade thickness Min 0.4mm - Tooth pitch Max. 60mm - Tooth depth Max. 30mm - Tooth forms NU, NV, PV, PU, KV, SB Hook angle (0°) (+40°) - Feed rate (speed controlled) Max. 90 teeth/min. - Grinding wheel dimensions D: Ø250mm d:Ø20mm - Grinding wheel thickness 5-13mm (depending on tooth pitch) - CBN Grinding wheel dimensions D: Ø250mm d:Ø20mm - CBN Grinding wheel thickness 2-3mm (depending on tooth pitch) - Grinding wheel rotation (speed controlled) 1400-5500 r.p.m. - Grinding wheel motor power 1,10kW - Coolant type Water emulsion(bakalite wheel) / Oil (CBN wheel) - Coolant motor capacity 70 lt/min. Coolant pressure 10 bars. Kjdpfoyk Icaox Ab Tjwu - Coolant container capacity 80lt. Motor quantity 6 - Connected load 3,6kW - Voltage 400V, 3Ph, 50-60Hz - Dimensions 1550*2000*1550mm (saw blade unmounted) - Net/gross weight 750/800kg PNK-CNC at a glance: - 2 axes Servo motor controlled. - Operating screen in any language. (please state the required language in order) - Downloading a program through internet if demanded. - LCD screen control panel. - Language selection on the control panel. - Tooth form selection from the control panel. - Grinding all common tooth types. - Possibility of saving grinding programs of the blades ground. - Following the hook angle from the control panel. - Indexing by servo motor. - Absolute tooth pitch accuracy. - Variable grinding speed. - Variable grinding wheel rotation speed. - Grinding head riding on linear rails. - Optionally wet or dry grinding. - Grinding by CBN wheel or DIA wheel. - Water emulsion/oil coolant [for CBN grinding]. - Central lubrication. - Integrated light unit. - Separation of electronic and grinding areas. - Included band saw carrier legs. - Motor controlled band saw vertical movement. - Steady mechanic blade clamp. - Enclosed cabin for operator safety. - Ergonomic machine construction for ease of loading and unloading. - Simple controls for ease of use. - Rigid machine construction. - Production conformed with CE standards. OPTION: - full cover EUR 2.500,-

Condition: new, Year of construction: 2026, Sawblade width max. 120 mm Weight 350 kg Motor output 1,3 kW WINTER AUTOMATIC BAND SAW GRINDING MACHINE BANDSAWMAX 120 PNK-AB PNK-AB is specially designed for grinding the teeth of various band saw blades used in various forms, width and thickness. Compact and rigid grinding unit moving on linear bearings of PNK-AB machine provides precise and stable grinding Technical specifications: - Band Saw Width 15-120mm - Tooth pitch Max. 60mm Tooth depth 0-30mm - Tooth forms PV,NV,KV,PU,NU - Hook angle -10° to +30° - Feeding rate 0-90 teeth/min. - Motor quantity 2 - Grinding wheel motor – 1.1kW, 1400 r.p.m. - Gearbox motor double-rev. – 0.55kW, 1400 r.p.m - Grinding wheel diameter Ø250mm - Grinding wheel bore diameter Ø20mm - Grinding wheel thickness 8mm/10mm/13mm (depending tooth pitch) Kodpfxjyk Ib Aj Ab Tswu - Operating voltage 400V, 3Ph, 50-60Hz - Total power ~1,3kW - Dimensions 80*120*175cm - Net/gross weight 350/375kg PNK-AB General Features: - Automatic grinding of band saw blades up to 120mm width. - Grinding wheel riding on linear rails. - Non-corroding and hardening plating on all mechanical components. - On/off switch. - Max 60mm tooth pitch. - Ease of use. - Minimum space required. - Fast and precise grinding of NV,PV and KV tooth forms. - Manual central lubrication. - Manual saw holder and blade lifting system. - Optional circular(HSS) and gang saw grinding attachments. - Production conformed with CE standards Capacity: Grinding up to 30 band saws per day. Optional supplements: - CBN Woodmizer wheel nett price EUR 375,- - Diamond wheel for Bimetal nett price EUR 520,- - Bakelite wheel 13mm nett price EUR 75,- - Ceramic wheel 16mm nett price EUR 115,- - CBN grinding wheel nett price EUR 1.125,- - Spare Index Finger nett price EUR 70, - Index finger pin nett price EUR 20,- - Wheel dresser attachment nett price EUR 1.170,- - Wheel dresser diamond nett price EUR 100,- - Circular (HSS) saw grinding attachment nett price EUR 960,- - Frame saw grinding attachment nett price EUR 2.700,-/1meter - Coiler and uncoiler system for band saw manufacturers nett price EUR 5.800,- - Sealed packing nett price EUR 570,- - Attachment for double side saws nett price EUR 1.560,- - Pneumatic system for second indexing finger nett price EUR 1.140,- - CAM for GD tooth profile (WM) blades nett price EUR 330,-