Used Drying Furnace for sale (2,877)

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Bjdpefy Txyofx Acwswn Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning. Bwjdpfx Acefzkqmjwjn

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! Bsdpofz U Hvefx Acwjwn The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: used, Year of construction: 1997, machine/vehicle number: 16109, functionality: fully functional, Electrotherm HL-36x50-EQ-2 Vacuum Furnace Chamber (1997) Stokes Vacuum Pump System Digital Display Controller Slide Rail Track Part Entry Cart 1300 Max Temp Sublocation - Heat Treatment area. Bwedpfxsx Ap N Re Acwjn

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total length: 7,800 mm, total width: 2,200 mm, overall weight: 2,100 kg, 2020 HEBBECKER VJ II 2-9090-4180 – 7,8m Gas Textile Tunnel Drying Machine Professional industrial gas-powered textile tunnel drying machine manufactured by HEBBECKER, designed for continuous high-volume textile screen printing production. The machine provides efficient and uniform curing performance while maintaining low operating costs thanks to its gas heating system. Ideal for industrial textile printing facilities requiring reliable and energy-efficient drying solutions. Technical Specifications Manufacturer: HEBBECKER Model: VJ II 2-9090-4180 Year of manufacture: 2020 Machine type: Gas Textile Tunnel Dryer Heating system: Gas-powered Application: Textile screen printing curing and drying Continuous conveyor drying system Heavy-duty industrial construction Key Features Gas heating system for energy-efficient operation Continuous industrial conveyor belt Uniform heat distribution technology Adjustable conveyor speed Stable temperature control High-capacity production performance Suitable for plastisol and water-based inks Optimized airflow and curing efficiency Reliable industrial production design Low operating and maintenance costs Advantages Lower energy consumption compared to electric dryers Fast and consistent curing results Ideal for continuous production environments Excellent integration with automatic screen printing lines Robust and reliable industrial-grade construction Advanced Technical Features Gas-powered industrial tunnel dryer Continuous conveyor belt system Optimized hot air circulation technology Uniform temperature distribution Adjustable conveyor speed control High-efficiency curing performance Industrial heavy-duty insulated construction Designed for continuous 24/7 production Suitable for plastisol, water-based and discharge inks Stable industrial temperature management Energy-efficient gas heating system Optimized airflow for consistent curing quality Low operating costs compared to electric dryers Industrial-grade drive and transport system Reliable high-volume production performance Production Advantages Fast and uniform textile curing Excellent integration with automatic carousel printing machines Reduced energy consumption Stable production workflow Consistent print curing quality Suitable for industrial textile printing environments Easy maintenance and operation Machine Construction Heavy-duty steel frame Bjdpfjy Ty Sgex Acwswn Industrial conveyor transport system Insulated heating chamber Professional industrial production design Built for long-term industrial operation

Condition: used, Year of construction: 2018, functionality: fully functional, operating hours: 5,000 h, Continous Cast link belt Hardening & tempring furnace with online pre wash & post wash SCADA control fully automatic Bsdpozbiqgofx Acwown

Condition: excellent (used), Year of construction: 2011, Dry air dryer FarragTech CARD 10 S with container and 2 x suction conveyors ICEVA GS-4mD Stock no.: 503577 Machine type / Device type: Dry air dryer Manufacturer: FarragTech GmbH Type: CARD 10 S Year of construction: 2011 Bsdpfxsy Akk Sj Acwewn Container volume: 10 ltr. Throughput: 2 h / 3.25 kg / 80° ABS Power: 1.1 kW Voltage: 230 Volt Hopper volume: 70 ltr Accessories: 2x suction conveyors ICEVA GS-4mD

Condition: new, CATALOG NUMBER MR001 - brand new machine, DTR documentation + CE TECHNICAL DATA - working width: 2000 mm - front width: 2500 mm - depth: 850 mm - height: 1700/1950 mm - max. capacity: 7000 m3/h - fan power: 1.5 kW - speed: 2850 rpm - electrical parameters: 400V-50Hz - outlet duct diameter – square 540x540 mm - pre-filter: cardboard Bodpfjx Uz Rmjx Acwewn - "Paint-stop" filters - noise level approx. 78 dB - dimensions L/W/H 2500x850x2200 mm - weight approx. 250 kg Net price: 14,100 PLN Net price: 3,350 EUR at an exchange rate of 4.20 PLN/EUR (Prices may change with significant fluctuations)

Condition: used, Year of construction: 2012, functionality: fully functional, 12 months warranty, refurbished, delivery time approximately 3 weeks -Unit mounted on a base frame -Maximum temperature: 1300 °C -Oven chamber volume: 120 liters -Oven chamber: 500 x 500 x 500 mm (W x D x H) -Control cabinet separate -Eurotherm 3504 Bjdpfx Ajyn Emqscwewn -Parallel swing door for opening in the hot state -Slot in the oven collar on the lower right side (for retrofitting CO2 and N2 gas supply in a gas supply box, not included!) -Power: 15 kW -Connection: 400V 3/N/PE 50 Hz -Weight: 410 kg -Documentation, CE declaration Oven, industrial oven, annealing oven, heat treatment oven, chamber oven

Condition: ready for operation (used), A retort furnace PFS Anlagenbau UG for gas nitriding, nitrocarburizing, and tempering is available. Load weight range: 750kg-6000kg, max. operating temperature: 750°C, treatment chamber dimensions X/Y/Z: 1800mm/900mm/900mm, number of burners: 4, burner type: recuperative, burner output: 4×80kW, loading height: 1200mm, max. evacuation temperature: 350°C, retort material: 1.4841, circulator air volume flow: 10000m³/h, nitriding system manufacturer: Process-Electronic, vacuum pump capacity: 240m³/h, total pressure: below 0.7mbar, max. operating pressure: 1.45bar. Documentation available. An on-site inspection is possible. Bwedpfjy N Uxgsx Acwen

Condition: used, This listing is for the Binder Fed 400 Drying Heating Chamber. The unit is in full working condition and ready for immediate use. Designed for consistent temperature control, it is ideal for drying, heating, and thermal testing applications in laboratory environments. Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Bwjdpfx Aoy H I Ngecwen Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, This listing is for the Bambi VTS 150D Oil Free Dry Air The unit is in full working condition and ready for immediate use. Compact and ultra-quiet, this oil-free compressor delivers clean, dry air for sensitive laboratory applications, including analytical instruments and medical devices. Built for reliability and low maintenance operation. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Bjdey H Dv Aepfx Acwjwn Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 250 h, functionality: fully functional, As-new drying chamber, fully functional, immediately available Bodpfx Acjy Ny U Tjwjwn

Year of construction: 2006, condition: good (used), Make: Pano Type: automatic 1 head dry vacuum closing machine Model: VKV-15 Serial number: 05-122 Construction year: 2006 Capacity: up to 1.200 jars per hour Frame: stainless steel 1.4301 (AISI 304) Power supply: 380 Volt – 50 Hz – 1,5 kW Features: stainless steel control cabinet excluding conveyor including rotating magnetic cap sorter including vacuum pump including safety housing as-is or adjusted to customer needs Bsdoibba Repfx Acwown

Condition: used, The comfortable Varioflex rack trolley is designed for flexible and gentle storage of painted workpieces. Additionally, its 4 swivel castors allow for the transport of the workpieces. Its stable tubular frame construction can be adjusted from 200 to 2000 mm. With 17 inner and 17 outer support tubes per side, the trolley can handle weights of up to 400 kg with evenly distributed loads. The plug-in inner and outer support tubes can be optionally removed and re-inserted at the rear. When not in use, the rack trolley can be collapsed to save space. Optional accessories: - Plastic-coated support tubes Bedpfx Asy Dkg Ascwewn - Additional rack Technical data: Length: 200 - 2000 mm Depth: 870 - 1180 mm Height: 1855 mm Support tube length: 650 mm - extendable up to: 1150 mm Clear spacing between tubes: 70 mm Load capacity: 400 kg Availability: short-term Location: Röllbach

Condition: used, Pit protective gas furnace (crucible furnace) Max. temperature: 1,150 °C Usable space: Ø 900 x 1,050 mm Batch weight: up to 1.5 t Atmosphere: N₂ / H₂ / NH₃ / CO₂ Bwedpey Iw Dcofx Acwon 2 retorts 2 cooling stations Bar controller SE 607 Complete gas dosing station for operation of 2 retorts

Condition: excellent (used), Shaft air circulation furnace / shaft annealing furnace Bodpfx Acoy Iwxyswewn Suitable for tempering and annealing up to 8 t Max. temperature: 850 °C Working dimensions: Ø 1,900 x 1,900 mm Charge weight: up to 8 t Atmosphere: air Stange controller SE 607

Year of construction: 2025, operating hours: 1 h, condition: new, functionality: fully functional, total length: 2,500 mm, total width: 1,000 mm, total height: 1,700 mm, drive type: Elektrisch, conveyor belt width: 800 mm, Equipment: rotational speed infinitely variable, Offered is a special-purpose machine designed to heat or flame-treat wood, horse hooves, or other materials using a wire conveyor belt and fire. Gas-powered burners or flame pots (2x6 units above, arranged in two staggered rows; and 2x6 units below, also in two staggered rows) are used, with each row individually controllable. This machine is ideally suited for companies specializing in Yaki Sugi (Shou Sugi Ban) treatment. Operation videos can be provided upon request. Conveyor speed is continuously adjustable. Key data (see photo): - Power: 0.75 kW - Conveyor width: 800 mm Bjdpoy N Ekmofx Acwswn - Dimensions: 2500 x 1000 x 1700 mm The machine can be inspected in Schöneiche near Berlin (15566). Price excluding 19% VAT.

Condition: new, Type CSD-HT-BR 70 Internal dimensions (width x depth x height) 7500 x 7160 x 4100 mm External dimensions (width x depth x height) 8080 x 7760 x 5500 mm The section of the structural columns of the chamber is 160 x 70 mm Snow load for the roof is 80 Kg/m2 Wind resistance of walls 27.8 m/sec Bwsdpfxsrxtuie Acwen Warming with glass wool Walls ǂ100mm Roof ǂ100mm Door ǂ100mm Door: sliding type, hung on a rail Wood for drying: various Loading the drying chamber with a forklift The heating system is gas Fuel - GPL gas Maximum thermal energy (300 kW) Maximum chamber temperature 75 °C The number of fans in the chamber is 5x3kw The total capacity of the fans is 162,500 m3/hour Number of probes: 4 HT/ 8 AWM/ 2 EMC/ 2 Temperature Voltage 400 V 50 Hz Total power 17kw)

Condition: new, Year of construction: 2023, Infrared Dryer IR-TEX MINI, 700mm Belt width: 700mm, spot width: 500mm, cover length: 1m, total length: 1.8m, heating: 4 kW, connection: 400V, 50Hz Infrared drying channel for textiles with ceramic spots, Teflon-coated belt, electronic conveyor control, heating variable via Digi-Thermo, suitable for a small number of items, compact construction, insulated cover. Bjdpjh Tyw Ajfx Acwswn

Condition: new, power: 14 kW (19.03 HP), inner dimension length: 1,000 mm, inner dimension width: 1,000 mm, inner dimension height: 1,000 mm, total length: 1,395 mm, total width: 1,600 mm, total height: 2,045 mm, overall weight: 400 kg, control type: NC control, actuation type: electric, fuel type: electric, continuous power: 14 kW (19.03 HP), Equipment: CE marking, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately according to the delivery address. Please contact us for an individual transport quote. ✅ Made to order ✅ Brand new, unused professional industrial product ✅ Proton Maschinenbau GmbH is the sole authorized European distributor for Matech products ✅ 2-year warranty ⏱️ Delivery time: approx. 4 weeks after receipt of payment Please also inquire about current stock availability. ➖➖➖➖➖ ⭐ Matech Powder Oven with Electric Heating – MATOVENB-101010 MATECH QUALITY – WITH PROTON SERVICE! ☘️ Compact ☘️ Efficient ☘️ Professional Curing ✅ Electrically heated powder oven ✅ Compact design for small and medium-sized workpieces ✅ Digital temperature control up to 220°C ✅ Adjustable curing temperature and curing time ✅ Automatic exhaust fan function adjustable ✅ Acoustic signal at the end of curing time ✅ Insulated door with special locking system ✅ Robust sandwich panel construction ✅ Excellent heat retention through strong insulation ✅ Timer function from 10 minutes to 24 hours ✅ Automatic shut-off after process completion ✅ Can be used with a mobile workpiece trolley ✅ Optional insert shelving system for small series ➖➖➖➖➖ ♨️ Also available with upgrade for up to 500 °C for high-temperature processes (optional) ➖➖➖➖➖ Technical Specifications: ✔️ Electric heating power: 12 kW ✔️ Blower output: 1,500 m³/h ✔️ Circulation fan: 0.75 kW ✔️ Total output: approx. 14 kW ±10% ✔️ Digital temperature control ✔️ Stepless temperature adjustment up to 220°C ✔️ Interior: 1.2 mm galvanized steel ✔️ Exterior: 1.2 mm powder-coated steel ✔️ Insulation: 150 mm ✔️ 50 mm rock wool + 100 mm glass fiber ✔️ Adjustable curing time ✔️ Adjustable exhaust fan function ✔️ Acoustic signal after process end ✔️ Control panel: 1 piece ➖➖➖➖➖ ⚙️ Optional Control Functions ✅ PID control for precise temperature management ✅ Touchscreen control panel and smartphone operation ✅ Ramp heating mode for defined temperature curves ✅ Storage of process parameters ✅ Weekly & monthly reports at the push of a button ➖➖➖➖➖ ⚙️ Safety and Process Control Safety sensor for overheating prevention Automatic shut-off in case of fault Acoustic warning signals for errors Fume extraction via automatic ventilation ➖➖➖➖➖ Bedswfpp Eopfx Acwewn ♨️ Ramp-Heating Mode (optional) Control temperature profile and holding times precisely, e.g.: • Reach target temperature in defined time • Hold at set temperature for desired period • Controlled cool-down to target temperature • Automatic notifications for process events ➖➖➖➖➖ ✅ No repeated settings required! The oven stores your process parameters – batch after batch. This saves you time and prevents errors. ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer various financing models so you can flexibly plan your investment. Please contact us for information about leasing, hire purchase, or installment options. ➖➖➖➖➖ ✨ Buy directly from the official European distributor and secure the advantage of professional service and guaranteed quality! ✨ Custom dimensions or individual configurations are available on request. We are happy to design a suitable solution for your workshop. Inquire now – make your business ready for professional powder coating!

Year of construction: 2004, operating hours: 24 h, condition: used, functionality: fully functional, Full wahing & drying line for Spinac, Arugula and other leaves vegetables, line inluded: -Turatti Blowing washer with jacuzzi effect for arugula, spinach, 1500x 4500 cm, huge capacity per hour 500-1500 kg/hour -spinner FMT -transporters We also have metal detector for good monies Bjdpfxjrrvx No Acwown

Condition: good (used), gas burner for drum dryer. capacity 2.5 t/h Bedjwh Ik Tspfx Acwswn

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, total length: 5,000 mm, total width: 1,500 mm, type of input current: three-phase, year of last overhaul: 2024, working width: 1,500 mm, We are offering this very well-maintained Tesoma Compact gas dryer tunnel, 1.50 m wide, year of manufacture 2009. If you have any questions or would like more information, please feel free to send us a message or call us. Transport to be arranged by the buyer, price excluding VAT. Bsdey Icdhspfx Acwswn

Condition: ready for operation (used), Year of construction: 1974, An industrial drying oven Biagosch & Brandau, which has been overhauled by Neitz, is available. Fuel: natural gas, calorific value: 7600kcal/Nm³, gas pressure: 200mm/Ws, fuel consumption: 2.75Nm³/h, operating temperature: 120°C, heating capacity: approx. 23.3kW/20000kcal/h. An on-site inspection is possible. Bedpfsy Ndfvjx Acwown