Used Eht Variopress 125-3550 for sale (52)

Condition: used, Year of construction: 2006, pressure 135 t chamfer lenght 2550 mm distance between columns 2050 mm control CYBELEC ModEva 10 S dayligth 570 (EHT) mm total power requirement 25 kW weight of the machine ca. 11.000 kg Machine: - Sturdy machine frame constructed as a fully welded all-steel structure - Pressure beam with high bending strength - Electrohydraulic top drive via proportional valves - Modern block hydraulic system Optional equipment: - Increase in installation height and stroke by 150 mm each - Backgauge system 2 - 2 axes, R-axis adjustment 150 mm - 2 x additional stop fingers 2/4-axes, however, offset by 20 mm - CNC holding device - Distance from the bending line to the holding device approx. 240 mm - EHT quick-clamping device for EHT upper tools, pneumatic, head width 26 mm, horizontally self-centering - EHT lower tool clamping, mounting width 55 mm, pneumatic - Hardened insert strip for EHT lower tool clamping 55 mm / 90 mm - Die shift CNC-controlled, infinitely variable - CNC crowning device in the table (table width min. 110 mm) without tool clamping - SICK V4000 safety device - 2 x bending aids, max. 1500 N - 2 x 2 support rails for bending aid with 14 mm T-slot and scale Bodpfx Asy D T S Isnpjlp - 2 x table extensions for bending aid - Parking position on right and left, short

Condition: good (used), Year of construction: 2000, Punch press Manufacturer: EHT Type: Strippit 1500/30 Year of manufacture: 2000 CNC control: Fanuc Working area without repositioning: 2500 x 1500 mm Blodsul S Eajpfx Anpsp Maximum material thickness: 8 mm Punching force: 30 tons Turret with 46 tool stations, including 4 indexing stations, size D 3 programmable clamps Metal table Used exclusively in single-shift operation Includes tools from WILSON TOOL 31126

Condition: good (used), Year of construction: 2006, Press force: 135 t Bending length: 2550 mm Frame gap: 2050 mm Control system: CYBELEC ModEva 10 S Total power requirement: 25 kW Machine weight approx.: 11,000 kg Description Machine: – Rigid machine frame as an all-steel welded construction – Ram with high flexural rigidity – Electrohydraulic top drive via proportional valves – Modern block hydraulics Special equipment: – Increased installation height and stroke by 150 mm each – Rear gauge system 2 – 2 axes, R axis adjustment 150 mm – 2 x additional backgauge fingers 2/4 axes, however offset by 20 mm – CNC sheet support device Bjdpfxsy H Ilbs Anpjlp – Distance from bending line to sheet support device approx. 240 mm – EHT quick-release clamping system for EHT upper tools, pneumatic, head width 26 mm, horizontally self-centering – EHT lower tool clamping, receiving width 55 mm, pneumatic – Hardened insert strip for EHT lower tool clamping 55 mm / 90 mm – CNC-controlled die shifting, stepless – CNC crowning system in the table (minimum table width 110 mm), without tool clamping – Safety device SICK V4000 – 2 x bending aids max. 1500 N – 2 x 2 support rails for bending aid with 14 mm T-slot and scale – 2 x table extensions for bending aid – Park position right and left, short

Year of construction: 1984, condition: ready for operation (used), Press force: 200t, working length: 3550mm, distance between columns: 3050mm, length: 4000mm, width: 2000mm, height: 3000mm, weight: 16t. The machine is fully functional and in good technical condition. Upper tools are included. The lower tool, consisting of the die block or prism, is missing. An on-site inspection is possible. Bljdpfezrn H Hjx Anpjp

Year of construction: 1991, condition: ready for operation (used), Hydraulic CNC press brake EHT for sale. Press force: 1100kN, bending length: 3050mm, min./max. table-ram distance: 280mm/600mm, rapid approach speed: 100mm/s, working speed: 2mm/s-8mm/s, return speed: 100mm/s, backgauge adjustment range: 5-1000mm, backgauge adjustment speed: 200mm/s, backgauge vertical adjustment: +/-10mm, safety distance between tooling and operating elements: 120mm, stopping time: 75ms, stopping distance: 11mm, Control system: DAK 90. Machine weight: 8500kg. Documentation available. Inspection by appointment possible. Bledpfxezkvk De Anpop

Condition: ready for operation (used), Year of construction: 2001, pressure 135 t chamfer lenght 3050 mm distance between columns 2550 mm dayligth 320 - 560 mm stroke 240 mm working feed 10.0 mm/sec return speed 150 mm/sec column arm 400 mm work height max. 1050 mm control DNC 1200 PS/B operating pressure max. 297 bar compressed air 4.5 - 6.0 bar connected load 15.0 kW oil volume 250 ltr. weight 11500 kg range L-W-H 5240 x 2400 x 2900 mm good/well-Maintained conditions used in Aluminum processing - in checked conditions - machine Video - Bedpfsx Ik D Asx Anpslp ?v=z-Bxibk_8uE Features: - CNC Electro-Hydraulic Press Brake - CYBELEC CNC Control Model DNC 1200 PS/B * Swiveling Control Panel, Front Right * Numerical Programming * Tool & Program Library - CNC Controlled Axes: Y1 + Y2 + X + R + CNC Crowning - CNC Electro-Motorized Backgauge (X-Axis) * with 3x Manually Adjustable Backgauge Fingers (Z-Axis) * Maximum Travel Speed: 250 mm/sec - CNC electro-motorized height adjustment from the backgauge (R-axis) * Maximum travel speed: 100 mm/sec. - CNC under-table crowning - CNC pneumatic die shifting (I-axis) - Pneumatic upper tool clamping - Pneumatic lower tool clamping - Rear safety guard, including swiveling door - 2x side safety guards - includes LAZER SAFE safety device - front - 2x stable front support arms with sliding system - original EHT split upper and lower tools - 1x freely movable 2-hand/foot control - Wiring diagram + hydraulic diagram

Condition: used, Year of construction: 1995, sheet width 6000 mm plate thickness 6 mm distance between columns 610 mm Control Elgo 87 P2 total power requirement 15 kW weight of the machine ca. 22 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Bedpfx Aeyutt Esnpolp About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2000, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1650 mm column arm 400 mm stroke 240 mm dayligth 320 - 560 mm ajustment speed 150 mm/sec working feed 15.0 mm/sec return speed 150 mm/sec back stop - adjustable 5.0 - 1000 mm table width 110 mm work height max. 1050 mm operating pressure max. 297 bar compressed air 4.5 - 6.0 bar oil volume 200 l operating pressure 340 bar total power requirement 7.5 kW weight of the machine ca. 5900 kg range L-W-H 4100 x 2100 x 2750 mm with increased installation height / piston stroke well-maintained condition (!!) - in checked condition - machine video - ?v=ikl6RNZWeiU Equipment: - CNC electro-hydraulic press brake - including CYBELEC CNC control * swiveling control panel at the front right * external screen - CNC axis adjustment: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) * Travel range .. 5.0 - 1,000 mm Bodpjxab Ugjfx Anpslp * Travel speed .. 250 mm/sec. - CNC electro-motorized height adjustment of the back stop (R axis) * Travel range .. 70 - 235 mm * Travel speed .. 100 mm/sec. - CNC electro-motoric adjustment of the stop fingers (Z axes) * Travel range Z1 .. 405 - 1.565 mm * Travel speed .. 1.000 mm/sec. * Travel range Z2 .. 485 - 1.645 mm * Travel speed .. 1.000 mm/sec. - CNC electro-motoric table crowning - CNC pneumatic die displacement (I axis) - EHT pneumatic tool clamping - upper tool - EHT manual tool clamping - lower tool * Tool holder 90.0 mm + 13.0 mm possible - 1x freely movable 2-hand/foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging door) - original operating instructions + circuit diagram etc. * Special accessories included: - Oil cooler for use in continuous operation

Condition: ready for operation (used), Year of construction: 1999, sheet width 3200 mm Bsdpfx Anexaa A Nepjlp plate thickness 4.0 mm ST distance between columns 3300 mm upper clamping bar adjustment 400 mm Adjustment folding beam 80.0 mm pivoting angle 180 Grad clamping capacity max. 200 KN rear stop 10.0 - 1600 mm oil volume 160 Liter total power requirement 9.8 kW weight 8500 kg range L-W-H ~ 4900 x 2000 x 2300 mm from a maintenance workshop good / well-maintained condition (!!) - inspected condition - machine video - ?v=RY-amZooeX4 Equipment: - robust CNC folding machine - CNC control unit - CYBELEC "DNC 80 PP" * swiveling control panel, front right * 2D graphic display for visualization and multi-simulation * 2D graphic programming * easy operation - CNC motorized backgauge * travel range 10.0 - 1,600 mm * pneumatic / retractable gauge fingers * adjustment speed max. 250 mm/sec. * rear sheet support table with brushes - motorized lower beam adjustment (S-axis) - electro-hydraulic folding movement of the lower beam - pneumatic upper tool clamping - pneumatic lower tool clamping - 1x mobile dual foot pedal - original operating manual + electrical/hydraulic schematics Special accessories included: - 1x segmented set of goat-foot upper tools, H = 150 mm - 1x segmented set of goat-foot upper tools, H = 200 mm - 1x standard sharp-nosed rail (installed) - 1x segmented set of bending/lower tools (installed) - rear sheet support with brushes

Condition: used, Year of construction: 1994, sheet width / mm plate thickness / mm distance between columns / mm Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Bodpfx Aeuddh Asnpjlp Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80; ELCO 85 P Lower knife height adjustment

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, working width: 3,000 mm, cutting angle (min.): 1.5 °, sheet thickness (max.): 30 mm, throat depth: 100 mm, TECHNICAL DETAILS Sheet metal width: 3,050 mm Sheet metal thickness: 30.0 mm Stand extension: 100 mm Cutting angle: 1.5° - 3.5° Adjustment speed: max. 200 mm/s Bodpfezlg Sbsx Anpolp MACHINE DETAILS Dimensions & Weight Dimensions: 4,700 x 3,535 x 2,980 mm Weight: 36,000 kg

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale Bodpfx Aexab Tvenpelp

Condition: good (used), Year of construction: 1999, cutting width: 6.050 mm Blodpfowzvntsx Anpop cutting thickness: max. 4 mm length stop range: 10 - 1.000 mm

Year of construction: 1987, condition: ready for operation (used), An EHT hydraulic guillotine shear refurbished in 2023 is available. Cutting length: 3000mm, max. sheet thickness steel/VA: 4mm/2mm, backgauge: 10mm-1000mm, adjustment speed: 180mm/s, stroke rate: 18-31 strokes/min, oil volume: 160l. Machine dimensions X/Y/Z: approx. 3700mm/2100mm/2150mm, weight: approx. 4800kg, operating hours: 44024h. The cylinders, blades and hoses were overhauled in 2023. On-site inspection is possible. Blsdpfjwrhwuex Anpep

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, controller model: Cybelec ModEva 10S, bending force (max.): 170 t, empty load weight: 16,300 kg, working length: 4,050 mm, TECHNICAL DETAILS Press force: 170 t Bending length: 4,050 mm MACHINE DETAILS Control: Cybelec ModEva 10S Machine weight: 16,300 kg EQUIPMENT Lasersafe 2 sheet supports Die shifting Crowning Bsdjxwnv Ejpfx Anpelp Pneumatic tool clamping top and bottom Controlled axes: Y1, Y2, X, R, Z1, Z2 Tool cabinet with tools

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, controller model: Cybelec DNC 800, bending force (max.): 175 t, distance between stands: 2,550 mm, working length: 3,050 mm, TECHNICAL DETAILS Press force: 175 t Bending length: 3,050 mm Frame gap: 2,550 mm MACHINE DETAILS Control unit: Cybelec DNC 800 Total power requirement: 15 kW Oil capacity: 300 l EQUIPMENT 2 support arms in front of the machine Pneumatic tool clamping Crowning system Controlled axes: y1, y2, x, R 2 manually adjustable backgauge fingers Two-hand foot operation Side safety doors Blsdsyhmc Tjpfx Anpep Punch tools Segmented V-dies

Condition: good (used), Year of construction: 1992, Sheet metal shears, tin scissors, sheet metal scissors, hydraulic shears Bodpfx Ansywzbdspjlp -Sheet shear: hydraulic -Cutting width: 2000 mm -Max. cutting thickness: steel 6 mm -Features: Back gauge, cutting gap adjustment -Space requirement: 3280/2700/H2060 mm -Transport dimensions: 2280/2700/H2060 mm -Weight: 5980 kg

Condition: good (used), Year of construction: 1993, Press force: 150 t Bending length: 3550 mm Distance between uprights: 3050 mm Control system: Cybelec DNC 880S Stroke: 700 mm Overhang: 350 mm Machine weight (approx.): approx. 15,000 kg Machine height: 3900 mm Accessories/Equipment: Blsdpfxegz S S Ss Anpsp - Bending aid positioned in front of the machine - Parking space for the bending aid - 3 stop fingers

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, working width: 4,050 mm, sheet thickness (max.): 8 mm, TECHNICAL DETAILS Sheet metal width: 4,050 mm Bedpfxozapq De Anpjlp Sheet metal thickness: 8 mm Control: conventional

Year of construction: 1998, condition: good (used), functionality: fully functional, machine/vehicle number: 107856, new seals on hydraulic cylinders TECHNICAL DETAILS material length: 6050 mm sheet thickness: 6 mm (450 N/qmm) passage: 6050 mm upright projection: 100 mm Control system: ELGO P8721 number of support arms: 4 stop range (from cutting line): 10 - 1000 mm Adjustment speed: 70 mm/s MACHINE DETAILS machine length: 7000 mm machine width (without support arms): 2350 mm Bodpfx Ael N Ufyenpelp machine width with supporting arms: 3440 mm machine height: 2550 mm Machine weight: 21000 kg Oil tank. 300 l Connected load: 18 kW Material: aluminum 1,2 mm EQUIPMENT motorized backgauge 1 side stop sheet holding-up system

Year of construction: 1992, condition: used, machine/vehicle number: 207320; Lg-Nr. 09361, Technical specifications: - Maximum working length 1250 mm - Distance between uprights 1050 mm - Maximum pressing force 80 t - Stroke 250 mm - Distance from upright to center of slide 300 mm - Maximum installation height between table and press beam 560 mm - Stroke speeds - Downward speed, no load, max. 100 mm/sec - Upward speed 100 mm/sec - Downward pressing speed max. 12 mm/sec - Total drive power 15 kW - Space requirement approx. W 1750 x H 3400 x D 2000 mm - Weight approx. 8500 kg Bsdpsb Rk Eksfx Anpjlp - including: - CNC control CYBELEC DNC 7400 PSGY - Controlled X-axis rear stop 5 – 1000 mm - Z-axis with three-stage pneumatic height adjustment - Manually adjustable and foldable stop fingers - Controlled pneumatic die shifting - Hydraulic tool clamping - Manual crowning - 2 support arms - Point tool, split, H 320 x L 1000 mm - Deerfoot tool, H 320 mm x L 1000 mm - Universal die, L 1000 mm

Year of construction: 1990, condition: used, pressure 1500 kN chamfer lenght 3550 mm distance between columns 3044 mm Bsdpfx Ansd Ih S Ujpolp Control Cybelec 34 PS-CN column arm 350 mm max. ram stroke 220 mm dimensions of the machine ca. 3200 x 4200 x 2100 m sheet support hinten / back number of support arms 2, verschiebbar / adjust. die shift hydraulical tool clamping upper tool quick change system crown 3 sets of tools included

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic pistons, pressure pistons, hydraulic buffers, pressure boosting cylinders Bsdegxnkcopfx Anpelp -Hydraulic cylinder: from press brake EHT type EHP 11-40 -Piston rod: Ø 155 mm -Stroke: 250 mm -Number: 2 cylinders available, 1 left / 1 right -Price: per piece -Dimensions: 855/285/380 mm -Weight: 311 kg/unit

Year of construction: 1990, condition: used, pression: 250 t Bjdpfx Ae Dqaqsnpolp working width: 3550 mm clear support width: 3050 mm support throat: 300 mm rear stop: ja mm electrical connection: 400 V, ca. 26 kW weight: 20 t space needed: 2100 x 3800 x 3100 mm

Year of construction: 1983, condition: used, machine/vehicle number: 28148, pression: 150 t working width: 4500 mm clear support width: 3050 mm support throat: 300 mm rear stop: 1000 mm Bledob N Evmopfx Anpep electrical connection: 380 V, 18,5 kW weight: 14,8 t space needed: 4200 x 2000 x 3000/3150 mm