Used Eht Variopress 175-40 for sale (53)

Year of construction: 2005, condition: ready for operation (used), Working length: 3050mm, max. material thickness: 16mm, cutting angle range: 0.5°-2.5°, cutting gap adjustment range: 0.05mm-1.2mm, stroke rate: 16/min, back gauge travel: 1000mm, oil quantity: 300l. Machine dimensions X/Y/Z: approx. 4200mm/4250mm/2050mm, weight: approx. 14000kg. Documentation available. On-site inspection is possible. Nodpfx Ajx U Dw Neb Tscn

Condition: good (used), Year of construction: 1987, fabric-no. 202 395 working length 2550 mm output 2000 KN tracking travel 13 mm safety distance 176 mm Nsdpfoq Awh Rox Ab Tscn

Condition: good (used), Year of construction: 1995, Technical specifications: Maximum cutting width: 6500 mm Maximum cutting capacity (steel St40): 6 mm Maximum cutting capacity (stainless steel): 4 mm Adjustable cutting gap Ncodpfx Abeyhpx Rj Tjn Adjustable cutting angle Adjustable parallel stop Oil capacity: 220 l Motor power: 18 kW Dimensions (L x W x H): approx. 8300 x 2200 x 2450 mm Overfloor machine (i.e. no additional foundation required) Weight: approx. 21 tons The seller is not liable for typing or data transmission errors. The machine's visual condition, technical state, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: from press brake EHT type EHP 11-40 -Measures: see drawing in the photos -Dimension: 4050/45 / H130 mm -Weight: 147 kg Ncodpogxnkvofx Ab Tsn

Condition: ready for operation (used), Year of construction: 2000, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1650 mm column arm 400 mm stroke 240 mm dayligth 320 - 560 mm ajustment speed 150 mm/sec working feed 15.0 mm/sec return speed 150 mm/sec back stop - adjustable 5.0 - 1000 mm table width 110 mm work height max. 1050 mm operating pressure max. 297 bar compressed air 4.5 - 6.0 bar oil volume 200 l operating pressure 340 bar total power requirement 7.5 kW weight of the machine ca. 5900 kg range L-W-H 4100 x 2100 x 2750 mm with increased installation height / piston stroke well-maintained condition (!!) - in checked condition - machine video - ?v=ikl6RNZWeiU Equipment: - CNC electro-hydraulic press brake - including CYBELEC CNC control * swiveling control panel at the front right * external screen - CNC axis adjustment: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) * Travel range .. 5.0 - 1,000 mm * Travel speed .. 250 mm/sec. - CNC electro-motorized height adjustment of the back stop (R axis) * Travel range .. 70 - 235 mm * Travel speed .. 100 mm/sec. Njdpfjxab Ugex Ab Tscn - CNC electro-motoric adjustment of the stop fingers (Z axes) * Travel range Z1 .. 405 - 1.565 mm * Travel speed .. 1.000 mm/sec. * Travel range Z2 .. 485 - 1.645 mm * Travel speed .. 1.000 mm/sec. - CNC electro-motoric table crowning - CNC pneumatic die displacement (I axis) - EHT pneumatic tool clamping - upper tool - EHT manual tool clamping - lower tool * Tool holder 90.0 mm + 13.0 mm possible - 1x freely movable 2-hand/foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging door) - original operating instructions + circuit diagram etc. * Special accessories included: - Oil cooler for use in continuous operation

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm Ncsdpfexab Tvox Ab Tjn thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: good (used), Technical data: Working length: 8050 mm Column distance: 7550 mm Pressing force: 200 t CNC control: CYBELEC DNC 880 S Adjustable backgauge Ncsdpfx Aoya D A Ijb Ten Dimensions (Length x Width x Height): approx. 8650 x 2900 x 3800 mm Weight: approx. 47 tonnes Note: The table extends approximately 3 meters into the floor. Accessories: Various tools The seller shall not be liable for typing or data transmission errors. The machine's condition, visually, mechanically, and regarding wear, is consistent with its age; used machines are sold without any form of warranty.

Condition: ready for operation (used), Year of construction: 2001, pressure 135 t chamfer lenght 3050 mm distance between columns 2550 mm dayligth 320 - 560 mm stroke 240 mm working feed 10.0 mm/sec return speed 150 mm/sec column arm 400 mm work height max. 1050 mm control DNC 1200 PS/B operating pressure max. 297 bar Nedpfsx Ik D Aox Ab Tjcn compressed air 4.5 - 6.0 bar connected load 15.0 kW oil volume 250 ltr. weight 11500 kg range L-W-H 5240 x 2400 x 2900 mm good/well-Maintained conditions used in Aluminum processing - in checked conditions - machine Video - ?v=z-Bxibk_8uE Features: - CNC Electro-Hydraulic Press Brake - CYBELEC CNC Control Model DNC 1200 PS/B * Swiveling Control Panel, Front Right * Numerical Programming * Tool & Program Library - CNC Controlled Axes: Y1 + Y2 + X + R + CNC Crowning - CNC Electro-Motorized Backgauge (X-Axis) * with 3x Manually Adjustable Backgauge Fingers (Z-Axis) * Maximum Travel Speed: 250 mm/sec - CNC electro-motorized height adjustment from the backgauge (R-axis) * Maximum travel speed: 100 mm/sec. - CNC under-table crowning - CNC pneumatic die shifting (I-axis) - Pneumatic upper tool clamping - Pneumatic lower tool clamping - Rear safety guard, including swiveling door - 2x side safety guards - includes LAZER SAFE safety device - front - 2x stable front support arms with sliding system - original EHT split upper and lower tools - 1x freely movable 2-hand/foot control - Wiring diagram + hydraulic diagram

Condition: good (used), Year of construction: 2000, sheet width 3050 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 - 8.0 mm down holder 13 Stück distance between columns 3070 mm cutting angle 1.0 - 4.0 ° no. of strokes ~ 22 Hub/min Control ELGO P8511 oil volume 240 l voltage 400 V total power requirement 15.0 kW weight 8000 kg range L-W-H 3550 x 2350 x 1900 mm good / well-maintained condition with special accessories (!!) Equipment: - NC electro-hydraulic guillotine shears - heavy / stable welded construction (machine body) - NC ELGO digital control unit "P8511" - NC electro-motorized backgauge on ball screws - electro-hydraulic cutting angle adjustment * Front analog cutting angle display - 1x stable side stop, with T-slot and mm scale - 3x stable support arms, with T-slot and mm scale - Ball castors in the work table incl. recessed grips - Front finger guard - can be folded up at the front Ncedjx Emqyopfx Ab Tsn - 1x freely movable foot switch - 2x front EMERGENCY OFF button - Operating instructions (PDF)

Condition: good (used), functionality: fully functional, Year of construction: 2005, controller manufacturer: ELGO, controller model: P8721, - Very well-maintained hydraulic guillotine shear EHT - Max. cutting length: 6050 mm - Max. sheet thickness at 450N/mm²: 6 mm - Pneumatic sheet support lift - Backgauge with positioning control Ncsdpfx Abox Sau Ee Ten - Ready for demonstration under power - Weight approx. 24 t

Condition: good (used), functionality: fully functional, Year of construction: 2006, control type: CNC control, controller model: DELEM DA-69 TW, bending force (max.): 300 t, working width: 6,050 mm, overall weight: 33,000 kg, input voltage: 400 V, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, - Press brake EHT / Trumpf 6050mm x 300t - Immediately ready for operation, well-maintained condition - CNC-controlled axes Y1 / Y2 / X / R / Z1 / Z2 / crowning Njdpfx Absx Rvrdj Tscn - Extensive tool set - From facility closure, available for inspection under power - Matching guillotine shear 6050 x 6mm from EHT / Trumpf also available

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, controller model: Cybelec DNC 70, bending force (max.): 110 t, stroke length: 200 mm, distance between stands: 3,050 mm, working length: 3,550 mm, TECHNICAL DETAILS Press force: 110 t Bending length: 3,550 mm Distance between uprights: 3,050 mm Frame throat depth: 400 mm Ram stroke: 200 mm MACHINE DETAILS Control system: Cybelec DNC 70 Drive power: 15 kW Ncsdpsxxqtcsfx Ab Tsn Weight: 9,500 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1993, bending force (max.): 150 t, stroke length: 700 mm, throat depth: 350 mm, distance between stands: 3,050 mm, working length: 3,550 mm, The control system was retrofitted in 2011! TECHNICAL DETAILS Press force: 150 t Bending length: 3,550 mm Distance between uprights: 3,050 mm Stroke: 700 mm Throat depth: 350 mm MACHINE DETAILS Control: Cybelec DNC 880S Dimensions & Weight Nsdpfx Absxn Srxo Tjcn Dimensions (L x W x H): 4,400 × 2,200 × 3,940 mm Machine weight: approx. 15,000 kg EQUIPMENT Bending aid in front of the machine Parking space for bending aid 3 backgauge fingers

Year of construction: 1990, condition: used, pressure 1500 kN chamfer lenght 3550 mm distance between columns 3044 mm Control Cybelec 34 PS-CN column arm 350 mm max. ram stroke 220 mm dimensions of the machine ca. 3200 x 4200 x 2100 m Ncsdpfed Ih S Uox Ab Ten sheet support hinten / back number of support arms 2, verschiebbar / adjust. die shift hydraulical tool clamping upper tool quick change system crown 3 sets of tools included

Condition: used, Year of construction: 1971, sheet width 2000 mm Njdpfjww Nccex Ab Tscn plate thickness 16 bei St 42 mm passage width 2250 mm impact length 1000 mm blade length 2005 mm throat 600 mm cutting gap adjustment 0,05 - 0,95 mm cutting angle 1° 40' ° down holder 10 Stück back stop - adjustable 10 - 1000 mm table: 2500 x 700 table height over floor 800 mm quantity of oil 900 l weight of the machine ca. 10 t dimensions of the machine ca. 3 x 2,3 x 2,3 m voltage 380 V Food switch, material support beams, spare knifes.

Year of construction: 1983, condition: used, machine/vehicle number: 28148, pression: 150 t Ncsdpfjb N Evmox Ab Tjn working width: 4500 mm clear support width: 3050 mm support throat: 300 mm rear stop: 1000 mm electrical connection: 380 V, 18,5 kW weight: 14,8 t space needed: 4200 x 2000 x 3000/3150 mm

Year of construction: 1990, condition: used, pression: 250 t working width: 3550 mm clear support width: 3050 mm Ncedpfxj Dqaqj Ab Tsn support throat: 300 mm rear stop: ja mm electrical connection: 400 V, ca. 26 kW weight: 20 t space needed: 2100 x 3800 x 3100 mm

Condition: used, functionality: fully functional, Year of construction: 2002, Press force: 135 t Bending length: 3050 mm Distance between uprights: 2550 mm Stroke: 400 mm Oil volume: 300 l Control: CYBELEC DNC 1200 PS Eco Total power requirement: 15 kW Machine weight approx.: 10,700 kg Dimensions (LxWxH): 4200x2200x3200 mm Accessories/Equipment: – 2 bending aids in front of the machine Nodpfexfh R Eex Ab Tecn – Parking right/left for bending aids – 3 backgauge fingers – CYBELEC DNC 1200 PS Eco control

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, operating hours: 4,125 h, working width: 3,050 mm, sheet thickness (max.): 13 mm, back gauge: 1,000 mm, TECHNICAL DETAILS Sheet width: 3,050 mm Sheet thickness: 13 mm Back gauge – electric: 10–1,000 mm Strokes: 16 strokes/min Control: Elgo MACHINE DETAILS Total power requirement: 22 kW Operating hours: approx. 4,124 h EQUIPMENT - Automatic cutting gap adjustment - Sheet lifting device - Foot switch Nsdeww E Nxepfx Ab Tecn - Digital back gauge 1,000 Elgo - Scrap chute - Rear safety guards - Angle stop - Material support arms

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1990, controller model: Cybelec ModEva 12S, bending force (max.): 320 t, working width: 8,050 mm, distance between stands: 7,550 mm, Conversion 2009: - motorized die shift 111-112: mechanically and electrically NEW - Backgauge X-R: mechanical and electrical NEW - Automatic punch clamping: mechanical and electrical NEW - CNC control: mechanical and electrical NEW - Safety valves NEW - Measuring rulers NEW - Control valves Y1 - Y2 NEW - Main hydraulic pump NEW TECHNICAL DETAILS Pressure: 320 t folding length: 8050 mm Stand width: 7550 mm Control system: Cybelec ModEva 12S Nsdpfx Ajw Sttajb Tocn EQUIPMENT - CNC-controlled backgauge x-direction and R-direction - Motorized die displacement M1 and M2 - 2 x pneumatic bending aids at the front - Pneumatic sheet holding unit - Automatic tool clamping at the top - motorized crowning

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: 210860, working width: 3,050 mm, stroke length: 280 mm, installation height: 480 mm, pressing force: 150 t, TECHNICAL DETAILS Bending length: max. 3,050 mm Stroke: max. 280 mm Installation height: max. 480 mm Press force: max. 1,500 kN Oil volume: 400 l Control type: UN9D1APSE MACHINE DETAILS Current type: 3-phase Frequency: 50 Hz Operating voltage: 400 V Control voltage: AC 230/24 V Rated current: 45 A Rated current of the main fuse: 80 A Ncodpfx Abswbuuro Ten Power of the main motor: 18.5 kW EQUIPMENT - Various special tools

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1993, machine/vehicle number: 209255, working width: 3,050 mm, stroke length: 280 mm, installation height: 480 mm, pressing force: 110 t, TECHNICAL DETAILS Bending length: max. 3,050 mm Stroke: max. 280 mm Installation height: max. 480 mm Control system: DNC70 Pressing force: max. 1,100 kN Oil volume: 340 l MACHINE DETAILS Current type: 3-phase Frequency: 50 Hz Operating voltage: 380 V Ncodpfxewkqr Se Ab Ten Control voltage: AC 220/24 V Rated current: 37 A Rated current of the main fuse: 63 A EQUIPMENT - 1 set of upper and 1 set of lower tools

Condition: used, functionality: unexamined, Year of construction: 2016, machine/vehicle number: 24398, control type: CNC control, controller manufacturer: Cybelec, controller model: Modeva Pac 15, Used Cybelec Modeva Pac 15 controller for press brake, max 7 axes. Nsdpfxox Dh U Ij Ab Tjcn

Condition: not inspected (used), Year of construction: 1992, CNC folding machine make: EHT, type: EHPS 11 - 45, SN: 206882, year: 1992, pressure capacity: 1,100 kN, working range: 4,450 mm, CNC control Cybelec, 2-hand operation, safety device make: Trumpf, retrofitted in 2023, last maintenance in 2023 by Trumpf for approx. €10,000.00, Njdpfxsv Duu Ee Ab Tecn Note: Machine already professionally dismantled and ready for transport

Condition: good (used), Year of construction: 1999, cutting width: 6.050 mm cutting thickness: max. 4 mm Ncsdpfxewzvnts Ab Ten length stop range: 10 - 1.000 mm