Used High Pressure Cleaner for sale (31,034)

Year of construction: 2013, condition: excellent (used), machine/vehicle number: B3.00122.2279, Stationary high-pressure pump unit, Hammelmann HDP 122, mounted on a base frame. Similar to, but not a Kamat, Uraca, or Woma. Pump type: HDP 122 Operating pressure: 440 bar Flow rate: 92 l/min Drive speed: 1500 rpm Drive power: 75 kW with AC motor ACM 208S 75 kW, electric motor, IP55, Ijdpfxshf Ixms Ap Djbc with pressure regulating valve, with safety valve, with oil cooling system. Dimensions L x W x H: approx. 1,800 x 900 x 1,450 mm Weight: approx. 1,230 kg Year of manufacture: 2015 Condition: in very good used condition.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 240202088, total width: 1,300 mm, total length: 700 mm, total height: 2,550 mm, overall weight: 350 kg, water tank capacity: 120 l, noise level: 70 dB, input voltage: 400 V, water pressure: 200 bar, pump capacity: 14 l/min, working width: 1,100 mm, Equipment: type plate available, High-pressure washing booth (new installation), working area 1100mm x 650mm. Temperature range adjustable from 0-45°C. The system features a chip screen and filter. Isdszlp Ifepfx Ap Dsbc In the washing area, the system is equipped with a high-pressure lance and an air blow gun. Stainless steel AISI304, steam extraction, water level sensor.

Condition: good (used), Technical data are shown on pictures. Iodpfop N Aq Hox Ap Debc

Year of construction: 2008, condition: excellent (used), Stationary high-pressure pump unit Hammelmann HDP 127 on a base frame. Similar to, but not a Kamat, Uraca, or Woma. Pump type: HDP 127 Operating pressure: 600 bar Flow rate: 66 l/min Drive speed: 1500 rpm Drive power: 74 kW with SCHORCH KA7280S-BB01B-Z 3~ IP55 75kW electric motor, with pressure regulating valve, with safety valve, Ibsdpfx Aoh Uc Iuep Djc with oil cooling system. Dimensions L x W x H: approx. 1,700 x 1,000 x 1,300 mm Weight: approx. 1,300 kg Year of manufacture: 2008 Condition: In very good used condition.

Condition: excellent (used), Year of construction: 1990, High pressure fan, dust extraction fan, pressure fan, vacuum fan, high pressure fan VRU 15-100-30H2.8 Condition: Used Drive motor: 3.5 kW p1:1.15kg/m3 Speed: 2880 rpm Volume output: 0.315m³/s Pressure point:62 mbar Connection input: Ø 100mm Connection output: Ø 100mm Dimensions: 1000x600x700 mm Ibjdpfovlz Arsx Ap Dsc Mass: 180 kg Location: from stock 54634 Bitburg - immediately available -

Condition: good (used), functionality: fully functional, ALLMATIC NC high-pressure chuck - Type NC 160 Ijdpfx Apozlytro Dobc - incl. 2 sets of jaws - incl. angular bracket for horizontal machining - incl. base plate 350 x 350 mm

Year of construction: 2011, condition: excellent (used), machine/vehicle number: B1.01177.0824, Stationary high-pressure pump unit Hammelmann HDP 177, mounted on a base frame. Similar to, but not a Kamat, Uraca, or Woma. Pump type: HDP 177 Operating pressure: 300 bar Flow rate: 239 l/min Drive speed: 1500 rpm Drive power: 130 kW Iedpfxjhtfynj Ap Djbc with VEM motor 132 kW, 3-phase motor, IP55, with pressure regulating valve, with safety valve, with oil cooling system. Dimensions L x W x H: approx. 2000 x 850 x 1400 mm Weight: approx. 1500 kg Year of manufacture: 2011 Condition: in very good used condition.

Condition: good (used), Heavy duty high pressure washer. Ibjdpeh Rkilefx Ap Dsc Two motors - 90kW + 1,5kW Machine was used for few hours and then stored at the warehouse. Delivery is available.

Condition: used, Year of manufacture 2007 Connection 400 V 16 A CEE 5.5 kW 630 m³/h Iodpfx Ajy Ec T Djp Djbc Functional video available.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 24050102129, total width: 2,000 mm, total length: 1,400 mm, total height: 3,000 mm, overall weight: 600 kg, water tank capacity: 250 l, working width: 1,200 mm, Front-loading wash system with automatic and manual operation. Temperature range in automatic mode: 0-80°C, in manual mode: 0-45°C. Washing table diameter: 120 cm. System made entirely of AISI 304 stainless steel. Ibedpfxezlqffj Ap Dsc PLC control with a 10" touchscreen, air gun, steam extraction, filter system, etc. Inspection and test cleaning are possible.

Condition: excellent (used), Pressure centrifugal pump Vertical centrifugal pump Grundfos CR 90-3 A-F-A-E-EUBE more piece Vertical, multistage centrifugal pump with suction and discharge ports on the same level. The pump head and base are in cast iron - all other wetted parts are in stainless steel (EN 1.4301) Rated flow 90 m³/h Rated head 65.5 m Max pressure at stated temp 16 bar / 120 °C Ibsdpjhy Nx Eofx Ap Doc Type of connection DIN Size of inlet connection DN 100 Pumped liquid Water Liquid temperature range 0 .. 120 °C Selected liquid temperature 20 °C Density 998.2 kg/m³ Electrical data Motor type SIEMENS Rated power - P2 22 kW 2940 rpm Mains frequency 50 Hz Rated voltage 3 x 380-415D/660-690Y V Rated current 41,5-39,5/24,0-23,5 A Cos phi - power factor 0.86 Rated speed 2945 rpm Number of poles 2 Enclosure class (IEC 34-5) IP55

Condition: good (used), ManuMatik / KraussMaffei High-Pressure Cylinder These high-pressure cylinders come from a commutator press and were in use there until the very end. Overall height: 184 cm Cylinder height: 150 cm Rod circumference: 28 cm Diameter: 8.90 cm The following components are included: Check valves z2s16-1-51 Pressure reducing valve Zdr 6 dp0-45/40ym w80 Scope of delivery: 1 x press unit Complete factory closure, large selection of storage platforms, pallet racking, shelving systems, and paternoster lifts. Ibsdshtyxlepfx Ap Doc High-quality industrial machines, lathes, grinding machines, and hand tools. You can find more new and used items in our shop! International shipping costs available upon request!

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: B5.00172.1454, total width: 850 mm, total length: 2,000 mm, total height: 1,450 mm, pressure: 340 bar, operating pressure: 340 bar, type of input current: three-phase, overall weight: 1,700 kg, rotational speed (max.): 1,500 rpm, empty load weight: 1,700 kg, power: 147 kW (199.86 HP), year of last overhaul: 2026, pump capacity: 239 l/min, Equipment: type plate available, Stationary high-pressure pump unit Hammelmann HDP 172 mounted on a base frame. Similar, but not Kamat, Uraca, or Woma. Pump type: HDP 172 Operating pressure: 340 bar Flow rate: 239 l/min Isdpfxsyablms Ap Dsbc Drive speed: 1500 rpm Drive power: 147 kW with SIEMENS 160 kW 3-phase motor, IP55 Dimensions (LxWxH): approx. 2000x850x1450 mm Weight: approx. 1700 kg Year of manufacture: 2015 Condition: New piston seals installed and valves inspected in January 2026. In very good used condition.

Condition: excellent (used), Compressor type: Dry air Revolutions per minute 750 Outlet pressure: 42 bar Volume spawned: Number of cylinder lines 2/4 stages Supplied air: 7.73m³ / min; 464m³ / h Ijdpfx Apswcgc Rs Dsbc Motor power: 90kW

Condition: good (used), Year of construction: 2021, REF: MM6468 1 x MKN FlexiChef 150L high-performance multifunctional cooking pan. Suitable for soups, stews, ready meals, meat, fish, rice and pasta, bakery and confectionery products. Manufacturer - MKN Maschinenfabrik Kurt Neubauer GmbH & Co KG. Type - FCEKMP133DR-G20037. Serial number – 21542551. Date of manufacture – 2021. Electrical requirements - 380-415 V / 50 hz / 3 phase. Iedpfx Apozn Rbfo Djbc Power - 34 kW. Water pressure - 200-600 kPa. Overall dimensions - 1600mm long x 910mm wide x 1020mm high. Machine weight - 390 kg.

Condition: used, Jaw width: 125 mm Isdpfx Aeu Sh Hujp Djbc Clamping width: 220 mm

Year of construction: 2025, condition: as good as new (ex-display), IMMEDIATELY AVAILABLE!! Manual cleaning is performed using special gloves in the front area. The effectiveness of the cleaning process is ensured by a high-pressure pump and a special spray nozzle. In these devices, a temperature of up to 60 °C can be set for the cleaning fluid. The pressure is adjustable from 1 to 80 bar. Technical data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg, optionally up to 150 kg Spray pressure: adjustable from 1 to 80 bar Ibodof A Nqqjpfx Ap Djc Tank volume: 75 liters / heating power 2 kW Standard version: • Blow gun inside the chamber • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel sheets above the tank • Upward-opening flap with 2 handles and gloves • Window made of tempered glass • Door opening/closing system with gas spring support • Door opening monitoring via safety limit switch • Filter on the suction side of the pump (500 microns) • Foot switch for operating the cleaning pump • Internal lighting • Neoprene gloves, length 600 mm (chemical resistant) • Adjustable feet +/- 50 mm • External mini pneumatic oil separator

Condition: used, Vertical multistage high-pressure centrifugal pump KSB Type Movichrom N CN 3/10 2R Serial no. 1-P30-837561 Nominal flow rate max. 3 m3/h Nominal delivery head 70 meters = 7 bar Nominal speed 2900 rpm Motor power 1.5 kW Mains connection 400 Volt, 50 Hz - Pump construction in 10 stages - Pump elements made of stainless steel, pump base made of cast iron - Connection flanges DN 32 - Suitable for drinking water supply, irrigation and drainage Space required for pump L x W x H 250 x 220 x 830 mm Ibedpfsrl U S Esx Ap Doc Weight 38 kg Unused replacement pump from stock, as good as new Not a submersible pump or submersible pump

Year of construction: 2012, condition: excellent (used), Stationary high-pressure pump unit, Hammelmann HDP 47, mounted on a base frame. Similar to, but not a Kamat, Uraca, or Woma. Pump type: HDP 477 Operating pressure: 300 bar Flow rate: 24 l/min Drive speed: 1500 rpm Drive power: 14 kW with AC motors ACM 160L-4/HE 3~ IP55 15kW electric motor, with pressure regulating valve, with safety valve, with oil cooling system. Dimensions L x W x H: approx. 1,100 x 750 x 1,200 mm Weight: approx. 570 kg Year of manufacture: 2012 Iodpfx Apsh Uc Nkj Djbc Condition: In very good used condition.

Year of construction: 1989, condition: ready for operation (used), High pressure pump ABEL PC57.1S Article no.: RE-HU-2019-1102-P51e Machine: High pressure pump Type: ABEL PC57.1S Mach.-Nr.: 12042E9 Capacity: 18 m3/h Pressure: 100 bar Motor: 75 kW Ijdpfsd Hiwiex Ap Dobc

Condition: as good as new (ex-display), Used High Pressure Concrete Nailer HN 25 C2 MAX Powerlite The HN25C2 is a compact nailer for concrete and steel, allowing you to work as close as 6 mm from the edge, making it ideal for tight corners. Its main area of application is work on metal stud framing. The nose of the HN25C2 is compact, meaning you can also work with thin metal profiles. With special nails, it can penetrate steel up to 5.0 mm thick or drive nails into concrete with a compressive strength of 60 N. Technical specifications: • Operating pressure: 12–25 bar • Nail length: 15–25 mm • Magazine capacity: 100 nails • Air consumption: 1.6 ℓ/cycle at 18 bar operating pressure • Weight: 2.0 kg The nailer was used for demonstration purposes and is therefore classified as used. It is in perfect technical condition. Supplied in a transport case with user manual. Iedpfxjyizrfj Ap Djbc For further details, please refer to the pictures. You will receive an invoice with VAT shown separately. Payment in advance (bank transfer) only – no PayPal! Collection from our shop is of course also possible. Shipping by UPS – shipping costs €8.90. If you have any questions, please do not hesitate to contact us.

Condition: used, Mechanical High-Pressure Machine Vice GRESSEL Type MHS 126-3 High-pressure clamping device Jaw width: 125 mm Jaw height: 40 mm Opening width: 221 mm Clamping force: 2 / 3 / 4 tons Guideway height: 62 mm Iodpfx Aoxlkvdep Dsbc - Clamping force adjustable in 3 stages - High-pressure vice with mechanical power amplifier - Clamping range adjustable in 2 stages - Lateral thread for workpiece stop Dimensions: 440 x 140 x 102 mm Weight: 26 kg

Condition: good (used), functionality: fully functional, rotational speed (min.): 2,840 rpm, volume flow: 3,240 m³/h, pressing: 10,000 Pa, power: 18 kW (24.47 HP), High pressure centrifugal fan, dust extraction fan, pressure fan, vacuum fan, centrifugal fan, high pressure fan Spellna VRU 15-125-30H3 Condition: used Iedpfxsticdls Ap Dobc impeller: forward curved steel, direct drive. 700mm Drive motor:18 kW p1:1,2kg/m3 pressure:9500-12000Pa Number of revolutions:2950rpm air transport:3240m3/h Volume output:0.9m³/s Print pt:100 mbar Connection input:Ø 300 mm Connection output:Ø 200mm Dimensions: 1400x1400x960mm Mass: 350

Condition: new, Year of construction: 2016, functionality: fully functional, pressure: 440 bar, operating pressure: 440 bar, rotational speed (max.): 1,500 rpm, empty load weight: 1,700 kg, power: 66 kW (89.73 HP), year of last overhaul: 2026, pump capacity: 81 l/min, Equipment: type plate available, High-pressure plunger pump, Hammelmann HDP 72. Similar to, but not a Kamat, Uraca, or Woma. Pump type: HDP 72 Operating pressure: 440 bar Flow rate: 81 l/min Ijdpfx Apozgw Hxo Dobc Drive speed: 1500 rpm Drive power: 66 kW Max. inlet temperature: 60°C Year of manufacture: 2016 Condition: Manufactured in 2016, but unused.

Condition: like new (used), Falch Trail Jet 15, 300 bar, 24 l/min, 305 operating hours Isdpfxswlkrue Ap Djbc