Used Holz Her Sprint 1315 for sale (162)

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Bwsdpfx Aevvkfdjaqjw

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Features and technical specifications: Base machine 555 Workpiece support with 8 consoles, pneumatically clamped Drilling unit 7968: - 18 vertical drilling spindles with 32 mm spacing - Individually selectable - T-shaped arrangement - 12 on the X-axis and 6 on the Y-axis - Max. drilling diameter: 35 mm (depending on panel thickness) - Spindle extension stroke: 70 mm - Rotation direction: alternates between right- and left-hand rotation - Speed: 4725 rpm, steplessly adjustable - 2 horizontal drilling units in X-direction, 1 horizontal drilling unit in Y-direction Sawing unit 7946: - 3.5 kW - 90° pneumatic swivel - Speed: 5300 rpm - Tool holder: outer diameter = 200 mm, inner diameter = 30 mm, width = max. 3.5 mm - Sawing/grooving in X and Y direction Milling unit 7935: - With 6 kW spindle, water cooled Milling unit 7982: - For lock case milling Tool changer 7996: - 18-slot magazine (carousel) Vacuum pump 140 m³/h Manual control device PC control with TwinCAM WOP system Siemens control Availability: short-term Bwodpfx Aaswlwn Noqjw Location: Poland

Condition: used, Year of construction: 2003, total height: 2,900 mm, total length: 5,100 mm, total width: 1,700 mm, Weight: 650 kg - Year: 2003 - Documentation available: No - Serial number: 633/0-306 - Max. cutting height vertical [mm]: 2200 - Max. cutting width [mm]: 4300 - Min. saw blade diameter [mm]: 240 Bsdpfxsxbhmls Aaqjww - Max. saw blade diameter [mm]: 250 - Arbor saw blade diameter [mm]: 30 - Horizontal cutting: Yes - Vertical cutting: Yes - Transport dimensions: 5100mm x 1700mm x 2900mm (l x w x h) - Transport weight [kg]: 650kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2011, functionality: fully functional, Cutting length 4300 mm Cutting height horizontal 2110 mm Cutting height vertical 2200 mm Scoring unit Free-standing supports Bodpfjxt H Tnsx Aaqeww

Condition: used, Holz Her STREAMER 1057 FÜ + PU Edge thickness 0.4 - 6 mm Modern control with selector switch for adjusting the units Pre-milling unit for attaching before the gluing part Fully automatic edge magazine for rolls and strips Glue application station GLU-JET cartridges + PU gluing Glue application using nozzle technology Workpiece height 6-60 mm Automatic glue height adjustment High-quality 3-roller printing unit, 1st roller motorized Cutting unit pneumatic. for rolls and strips up to 6 mm edge thickness with pneumatic adjustment of 0-10° angle of the miter saws milling unit, flush milling 6 mm, radius milling - chamfer milling - 15° corner copying unit - 3 mm edge thickness scraping unit for chamfers and radii with 2 scraping blade holders Bwodpfx Aaexqa Iysqew surface scraping unit - finish spraying device - PU machine with all processing tools machine is WORKSHOP TESTED in TOP CONDITION

Condition: good (used), Formwork nails, formwork nails, strip nails, nail strips, compression head nails, nail rolls Bwjdpfx Aajv D Nuteqew -Manufacturer: Holz-Her, nail strips 1 box / approx. 6000 pcs. -Type: KRL 2075 2.8/3.1 x 65 H/A2 -Price/Delivery: complete -Transport dimensions: 410/350/H270 mm -Total weight: 16.6 kg

Condition: used, Storage location: Nattheim Bwjdpfx Aasvvkrdoqow

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Condition: well maintained Features and technical data: Cutting length: 4300 mm Cutting height: 2200 mm Cutting depth: 45 mm Motor: 3 kW Saw blade diameter: 220 mm with SuperCut scoring unit with automatic shifting grid with complete length stop Bedpjxb Hf Hefx Aaqoww with strip stop Availability: short-term Location: 65439 Flörsheim

Condition: excellent (used), 5-Axis Machining Center HOLZ-HER ProMaster 7125 -used- Console machine, pneumatic workpiece stops with double-acting cylinders, pneumatic loading aids, hardened, dust-protected prism guides, helical rack and pinion drive (X-axis), ball screw drives on Y and Z axes, network card for remote maintenance, electrical cabinet cooling with heat exchanger, manual control device, C-axis, A-axis, saw unit for grooving in the X direction, revolving disc tool changer, including safety fence, including tread mats, pendulum operation possible, laser for suction cup positioning, automatic central lubrication, uninterruptible power supply ----- Technical Data ----- Processing length (routing R) X: 3,385L / 3,605L mm, Processing length (routing R) Y: 1,335 mm, min. workpiece thickness: 215 mm, Bwedpfjxlqkhox Aaqsw control software: CAMPUS HOPS 7, main spindle motor power: 12 kW (S6), main spindle speed: 1,000 - 24,000 rpm, main spindle interface: HSK-F63, spindle cooling: liquid cooling, drilling unit motor power: 3 kW, drill spindle interface: M10, locating fit 11mm, number of vertical drill spindles: 10 pcs, number of horizontal double drill spindles in X direction: 2 pcs, number of horizontal double drill spindles in Y direction: 1 pc, saw blade diameter of saw unit: 125 x 20 mm, number of consoles: 6 pcs, number of tool changer positions: 18 pcs, vacuum pump capacity: 140 m³/h, extraction port diameter: 250 mm, required volume flow: 6,100 m³/h, required static pressure: 1,300 Pa, required air velocity: 35 m/s, compressed air connection: 6-8 bar, compressed air consumption: 300 Nl/min, weight: 4,600 kg, year of manufacture: 2019 Quality Information: - complete basic cleaning - electrics checked - pneumatics checked - set as per manufacturer's specifications - immediately ready for operation

Condition: good (used), Processing dimensions x-axis = 200 to 3200 mm x y-axis 70-920 mm x z-axis 8-70 mm Maximum machining in X direction without reclamping: 1500 mm for milling (minus cutter radius) Maximum machining in X direction without reclamping: 1300 mm for complete processing Drilling head with 15 spindles including saw unit for grooving in X direction Bjdpexlf N Ejfx Aaqoww Milling unit: 7.5 kW Tool changer: 6 positions Maximum programmable/vector speed: 68 m/min X = 25 m/min Y = 60 m/min Z = 20 m/min Software: -Canmpus -Single Basic -USB- Technical data available upon request. All information provided without guarantee, this data was taken from a brochure and a data sheet.

Condition: used, Holz Her Accura 1556 Premium Heavy-duty version with full equipment Edge thickness: 0.4 – 20 mm 18.5" touchscreen control in 16:9 format, rotatable and tiltable Synchronized belt bridge with motorized, position-controlled height adjustment Long, motorized, adjustable infeed fence Pre-milling unit for processing before glue application station with 2 NC servo axes Syncro edge magazine, fully automatic for coil and strip material MOT3, with 2 motorized hold-down devices GLU-JET automatic gluing unit. Cartridge + PUR bonding. Thin-film technology Adhesive height adjustment / contact nozzle Maximum edge height: 60 mm Pressure unit with 4 motor-pneumatic rollers. NC servo axis End trimming unit for coils and strips up to 20 mm edge thickness, with electro-pneumatic adjustment of the trimming saws from 0–10° bevel Flush milling unit 20 mm MOT3, motorized horizontal adjustment Multi-function milling unit MOT6 with multifunctional milling technology Flush milling 8 mm Radius milling R1, 3; R2 (2x) Bevel milling up to 45° Copy milling unit MOT4, with automatic tool changer MOT2 and oscillating probe, corner copying, postforming corners, with 4 NC control axes, for milling top and bottom longitudinal edges and copy milling of the front and rear vertical end edges. Working height 60 mm. Radius R1, 3; R2 (2x); bevel 45° Scraper unit MOT8 incl. high-gloss package and fully automatic tool changer, R1; R1.3; R2 (2x); 45° bevel Nesting package Surface scraper unit with pre and post sensor Demand-controlled, oscillating buffing unit for final cleaning and edge polishing with 2 textile wheels Spraying equipment at infeed and outfeed, as well as antistatic agent at the pressure unit Infeed area with electronically controlled separating agent spraying device Bwedsxnmu Ispfx Aaqew Pressure unit with electronically controlled antistatic agent spraying device Outfeed area with electronically controlled cleaning agent spraying device including cleaning agent Automatic chain lubrication Barcode scanner MACHINE IS FACTORY SERVICED AND IN TOP CONDITION Year of manufacture: 2021 / Leasing options available Machine is connected and ready for demonstration at the exhibition center Available from stock Lieboch

Condition: good (used), Year of construction: 2016, operating hours: 14,040 h, functionality: fully functional, travel distance X-axis: 3,100 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 240 mm, Operating data: Machine power-on count: 2,531, Machine operating hours: 14,040 h, Feed active: 2,016 h, Piece counter: 709, Total distance: 9,680 m. Bwjdpfx Ajxqg Nkjaqsw Working range X: 3,100 mm Working range Y: 2,100 mm Working range Z: 240 mm Max. spindle speed: 24,000 rpm, Tool clamping system: HSK-F63, Matrix table, Vacuum pump capacity: 500 m³/h, Safety device: Light barrier, Software: Holz-Her Campus 6.4 NC Hops, Required space: 7.7 m x 4.96 m.

Condition: used, Year of construction: 2011, Weight: approx. 4500 kg Bedovvi R Eepfx Aaqsww Storage location: Nattheim

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Equipment and technical data: - Base machine with manual pressure bridge adjustment - Extendable workpiece support - Joint milling unit FG 201 with 2 milling heads - Edge feeding with single infeed, automatic transport of roll and strip material - Glue application system Glu Jet GJ 301, automatic glue height adjustment (sensing nozzle) - Pressing unit 1912-3 pneumatic - Pneumatic trimming unit 1918 (60 mm) - Extraction hoods for trimming unit - Multifunction milling unit FR 201 - Corner copying unit 1832 for up to 3 mm edge thickness - Scraper unit 1929 - Chip collection box - Flat scraper 1964 - Buffing unit 1940 - Complete spray device 1856 Bwjdpfx Aajxllvroqow Minimum workpiece length: 160 mm Workpiece thickness: 60 mm Edge thickness: 0.4-6 mm Feed rate: 10 m / min Overall length: 4630 mm Weight: 1250 kg The extraction bridge shown in the pictures is not included in the scope of delivery! Location: Hesse Availability: approx. December 2025

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, On offer: High-performance HOLZ-HER CUT 6120 power – the ideal solution for precise and economical panel cutting. This machine stands out with its robust construction, excellent cutting quality, and user-friendly operation. Thanks to a cutting length of 6,500 mm and a 15 kW main motor, it is perfectly suited for operations with high material throughput and stringent quality requirements. Technical specifications: Cutting length: 6,500 mm Cutting height: 95 mm Main saw: Ø 380 mm, 15 kW, belt drive Scorer: Ø 180 mm, 2.2 kW, electrically adjustable Speed: 4,070 rpm (optionally 1,000–5,000) Feed rate: 0–100 m/min Return speed: 130 m/min Bwjdpfx Aoxqq Spoaqsw Pressure beam: pneumatic, programmable Tables: air cushion tables across entire working length Control: HOLZ-HER CUTCONTROL 2 with EASY-PLAN and OPTI-CUT Equipment and features: - Torsion-resistant machine frame with hardened V-guides - Electronically controlled saw carriage with automatic cutting length limitation - Dynamic grippers with double-finger clamps for 3 strips of 80 mm each - Pneumatic angular presser up to 1,300 mm, pre-positionable - Offcut function without waste - Postforming unit optional (up to 50 mm material) - Automatic lubrication optional - Air cushion tables with high-performance blowers - Digital networking via HOLZ-HER HHPDE - Software: EASY-PLAN, OPTI-CUT, OPTI-PRO - 17″ TFT touch display (optional 19″) Performance features: - Precise and clean cuts - High productivity thanks to short cycle times - Gentle material handling - Simple graphical operation - Low-maintenance and robust Condition: Excellent, well maintained, immediately ready for operation Special feature: Largest configuration in the CUT-6120 series with 6.5 m cutting length, 95 mm cutting height, and 15 kW main motor. Ideal for high production volumes and precise cutting to size.

Condition: not inspected (used), Year of construction: 1998, cutting width (max.): 5,300 mm, Equipment: rotational speed infinitely variable, scorer, Holz-Her 1230 Super Cut – Vertical Panel Saw – Scoring Unit – Digital Display Bjdpfx Aoxqd Udeaqsww Technical data: Cutting length: 5,300 mm Cutting height: 2,200 mm Cutting depth: 80 mm Motor: 5.5 kW / 4,500 rpm Feed rate: stepless up to 24 m/min Electric height adjustment, PLC control Extraction: 2 × Ø120 mm Air connection: 6 bar Equipment: Automatic horizontal & vertical positioning Digital readout for horizontal cuts Pneumatically swiveling saw unit Supercut scoring system Price: negotiable 6,500 Invoice with VAT, shipping available by arrangement

Condition: used, Holz Her Triathlon 1488 FÜ + PU Heavy-duty model – edge thickness 0.4 – 25 mm SPS screen control Edge-Control Motor-driven, position-controlled height adjustment – belt bridge Automatic infeed fence Pre-milling unit for jointing in front of the gluing unit Fully automatic edge magazine for coil and strip material Bodsxm Spbspfx Aaqjww Gluing station for cartridge and PU bonding Glue application via nozzle technology Automatic glue height adjustment Workpiece height 6–60 mm Pressure unit MOT End trimming unit for coil and strip material up to 15 mm edge thickness, with pneumatic adjustment from 0–15° saw angle Milling units – flush trimming for coil and strip material with 0.4–20 mm edge thickness Profile milling unit for longitudinal and end processing of edges, working height 45 mm Scraper unit for bevels and radii with 2 scraper holders, pneumatically activated Flat scraper unit Demand-controlled buffing unit Automatic central lubrication for chain Electronically controlled spray system at infeed and outfeed The machine is FULLY FUNCTIONAL The machine is in operation and can be inspected and demonstrated at the seller’s site at any time Brokerage on behalf of customer Available ex location as inspected, without any warranty NET €8,000.00

Condition: good (used), Year of construction: 2004, I sell the 3-axis CNC working centre HOLZ-HER UNI-MASTER 7226 with beam table Year 2004. Configuration: 3-axis main spindle recently full reconditioned / Water cooled Tool magazine 6 positions HSK63 on working head 1 grooving saw X-direction Drilling head 16+4 spindles Useful working area 3100x1360mm. 2 working fields, 4 clamping areas Bodpfei U Dxuex Aaqoww Automatic central system of lubrication. Holzher software controller with full instructions. 2x Pump SIEMENS ELMO-L S22 2,35KW. Good condition. Available immediately.

Condition: used, Year of construction: 2006, EVA glueing, 2 pressure rollers, cross-cutting station, pre-milling cutter and rounding cutter, surface scraper, transport device Bwjdpfx Aasvvkg Ieqsw Storage location: Nattheim

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Features and technical data: Cutting range: Cutting length: 4300 mm Cutting height: 2100 mm Cutting depth: max. 60 mm Extraction: Saw unit: 120 mm Frame end: 100 mm Workpiece support: Stable plastic support for optimal positioning, including for narrow workpieces Chips are removed via slanted slots Roller transport system: Manual for easy and material-friendly transport Indexing: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Circular saw blade: Carbide-tipped (HM), 250 mm, hollow ground alternate top bevel, 48 teeth Saw motor: 4 kW at 5,450 rpm, 400 V, 50 Hz Crosscut fence: Incl. workpiece support for narrow parts (4 positions) Extraction unit in accordance with BG guidelines TRK (less than 2 mg fine dust / m³ air) Dimensions: to follow Weight: to follow Bwodpfxoxllv Es Aaqow Availability: short-term Location: Flörsheim

Condition: used, Holz Her UNO 1303 + PU Edge thickness 0.4 - 3 mm (6 mm) Control panel with selector switches for aggregate setting Fully automatic edge magazine for both rolls and strips Glue application station: Cartridge + PU gluing Workpiece height 6-55 mm Pneumatic pressure unit End trimming unit for rolls and strips up to 3 mm (6 mm) edge thickness With adjustable mitering of trimming saws from 0-10° Milling unit for flush milling, radius milling, and chamfer milling - 15° Scraper unit for chamfers and radii Surface scraper unit - finishing Machine is TESTED and in TOP CONDITION from a very well-maintained craft shop Available ex-stock Lieboch at INVENTORY CLEARANCE FIXED NET PRICE €8,900.00 Bwedpfexlz Nzsx Aaqjw

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Bwodpfxovvi Spo Aaqjw Storage location: Nattheim

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Equipment and technical specifications: Machine completely overhauled and serviced Feed speed steplessly adjustable from 10–18 m/min Edge Control 19 control with 18.5" touchscreen color display Jointing milling unit Edge feeding unit Glue application station: cartridge with sensing nozzle, with automatic glue height adjustment Pressure unit End trimming unit Multi-function milling unit Corner copying unit Bedpfxswka N Tj Aaqeww Radius scraper unit Flat scraper Buffing unit Workpiece thickness: 6–60 mm Edge thickness: 0.4–8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: short notice

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Condition: Function tested Equipment and technical data: Max. edge thickness: 20 mm Max. edge height: 51 mm Bsdpfow I U E Asx Aaqeww Max. thickness of coil material: 3 mm Min. workpiece length: 140 mm Min. workpiece width: 60 mm Glue system: 1906 cartridge Pressure unit Milling unit 1920 for flush milling up to 20 mm and chamfer milling Required space (LxWxH): 3150x1800x1375 mm Weight approx.: 800 kg Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 2021, Factory-refurbished used machine with 6 months factory warranty Year of manufacture: 2021 Condition: As new Bwjdoxgkf Iopfx Aaqjw Features and technical data: Cutting height: 2200 mm x Cutting length: 4300 mm (Edging height / max. horizontal cutting height: 2110 mm) PowerPackage 400 V The package includes the following options: 1. TRK extraction unit 2. SuperCut scoring unit 3. Vertical digital display 4. Infinitely variable speed control (9 kW power) Pneumatic aluminium shifting support Medium-sized workpiece support on all panels Additional digital longitudinal stop (manual) Strip stop for recurring horizontal cuts Digital measurement display for horizontal cutting at the control panel 3 adjustable stop points in the saw beam Narrow part attachment (2 pieces) Location: Flörsheim Availability: Short notice