Used Injection Mold for sale (2,351)

Condition: excellent (used), Year of construction: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 injection unit: Dedezy I Efjpfx Afxecl Screw diameter: 35 mm injection weight: 117 g Injection pressure: 2500 bar Metering volume: 139 ccm Clamping unit: clamping force: 130 t tie bar distance: 470x470 mm size of clamping platens: 650x650 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The built-in system for control of the pressure quality from the brand Sensor Kistler - measurement of the mold pressure type of injection unit: Vario - it offers the possibility to use the injection unit e.g. for lateral injection The new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/width/height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heating power: 10,2 kW Total power: 32,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2012, Arburg 680CB 400-170 / Vertical injection molding machine, tie-bar-less / Very good technical condition. Dedpfszy Ibyjx Afxjcl Year of manufacture: 2012 Injection unit: Screw diameter: 25 mm injection weight: 54 g Injection pressure: 2500 bar Metering volume: 59 ccm Clamping unit : clamping force: 40 t tie bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Very good technical condition Vertical injection molding machine, tie-bar-less Euromap 67 Robot interface Air valve x 3 Hydraulic core puller x 3 Hot runner control x 12 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection It is possible to change the screw diameter The machine has been regularly serviced by the authorized service Arburg Original Arburg mold crane Dimensions: Weight: 6500 kg Length/width/height: 1.97x1.69x3.40 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 180398, clamping force: 1,200 kN, screw diameter: 35 mm, injection weight: 186 g, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire is this high precision Engel Victory VC 500/120 injection moulding machine. This tie bar-less machine is fitted with the Engel Microprocessor controller and 35mm diameter screw, which gives a shot weight of 186 (PS)g. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Djdpfszx Uc Isx Afxecl Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: excellent (used), Year of construction: 2011, Arburg 1500T 3200-1300 e² / hybrid machine with one rotary table Year of manufacture: 2011 Djdpfx Aozy I Sxsfxscl Injection unit: Screw diameter: 60 mm injection weight: 607 g Injection pressure: 2000 bar Metering volume: 664 ccm Clamping unit: clamping force: 320 t tie bar distance: 0x0 mm size of clamping platens: 1510 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30.000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Control with hot runners x 13 Injection unit hardened - bimetal Main machine motor - servo motor driven by inverter Very precise rotary table driven by servo motor controlled by inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor - mold pressure control It is possible to convert the injection unit so that it works vertically Dimensions: Weight: 16080 kg Length/width/height: 4.91x2.12x4.62 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2011, Engel Victory 1350/260 Tech Ecodrive with Engel Viper 20 Robot / Hybrid Machine Year of Manufacture: 2011 Injection Unit: Screw diameter: 55 mm Shot weight: approx. 590 g Injection pressure: 2183 bar Dosage volume: 618 ccm Clamping Unit: Clamping force: 260 t Tie-bar spacing: 0x0 mm Platen size: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional Equipment: Production line with Engel Viper 20 Robot Machine in very good technical condition Tie-barless hybrid machine: energy-saving and very quiet 8x air valve on the fixed platen side 2x hydraulic core pull on the fixed platen side 2x hydraulic core pull on the moving platen side 18 hot runner control zones Injection unit is wear-resistant and corrosion-proof Main drive motor – servo motor with inverter – energy-saving Proportional valve on injection unit – precise injection Engel Viper 20 Robot Year of Manufacture: 2011 6-axis robot: 4 axes (X, Y, Z, B - rotation) driven electrically by servo motors; axes A and C – pneumatic Robot safety package Robot with adapter, conveyor belt, and Engel brand safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 19,400 kg Length/Width/Height: 7.06x2.03x2.30 m All offered machines are started and tested by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can attend live technical tests at our facility in Łódź. Dcedezy Itiepfx Afxol Price: On request

Condition: excellent (used), Year of construction: 2006, Arburg 570C 2200-1300 / Hybrid Machine Year of manufacture: 07.2006 Injection unit: Screw diameter: 55 mm Shot weight: 469 g Injection pressure: 2380 bar Dosing volume: 558 ccm Clamping unit: Clamping force: 220 t Tie bar spacing: 570x570 mm Size of the platens: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Controller: SELOGICA Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 2 Controller with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by an inverter - energy saving The injection unit is driven by a servo motor, which is controlled by an inverter Dcjdpezy I Ruefx Afxsl Dimensions: Weight: 9300 kg Length/Width/Height: 5.16x2.06x2.39 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2016, operating hours: 2,000 h, functionality: fully functional, clamping force: 3,200 kN, screw diameter: 65 mm, clearance between the columns: 680 mm, displacement volume: 929 cm³, injection pressure: 2,130 bar, injection weight: 845 g, ejector force: 62,000 N, ejector stroke: 160 mm, plate length: 680 mm, plate height: 680 mm, total length: 7,010 mm, total width: 1,700 mm, total height: 2,250 mm, overall weight: 13,500 kg, type of input current: AC, input frequency: 50 Hz, input voltage: 400 V, The Haitian Mars Series MA3200 (available in generations II and III, as well as an Eco variant) is a servo-hydraulic injection molding machine with a clamping force of 3200 kN (320 US tons). The machine was in operation at an R&D test center in Israel for quality control purposes. The machine operated without any issues until it was deactivated in June 2026. Djdpfezww D Sex Afxocl You can find an exact specification in the documents. Delivery terms: EXW Israel – Zeelim, unpacked on the ground, transport and packaging at the buyer's expense.

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 7814-0045, total length: 4,000 mm, total width: 1,500 mm, total height: 2,000 mm, Weight approximately 3000 kg For sale is a used machine from a site closure. Dcodpfx Afjzqam Aexsl Sale is made excluding any warranty for defects. The machine has not been inspected but was operational until the very end.

Condition: not inspected (used), Year of construction: 1991, operating hours: 108,378 h, functionality: unexamined, total length: 8,000 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 20,200 kg, For sale is a used machine from a site closure. Dsdpfx Ajzrczlefxecl Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was in working order until the end.

Condition: not inspected (used), Year of construction: 2002, functionality: unexamined, machine/vehicle number: 45719, total length: 9,000 mm, total width: 2,300 mm, total height: 2,500 mm, overall weight: 33,500 kg, Handling including linear robot. Automation is not included but can be purchased separately upon request. Dsdpfszrd Ugex Afxecl Automation is integrated; programming work may be required. For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. The machine has not been tested but was operational until the end.

Condition: excellent (used), Year of construction: 2005, Arburg 1200T 800-150 / Vertical Injection Molding Machine with Rotary Table Year of Manufacture: 2005 Injection Unit: Screw Diameter: 25 mm Injection Weight: 45 g Injection Pressure: 2500 bar Dosing Volume: 54 cc Clamping Unit: Clamping Force: 80 t Tiebar Distance: 0 x 0 mm Clamping Platen Size: 1200 mm Ejector: Hydraulic Clamping Unit: Hydraulic Control System: SELOGICA Additional Equipment: Air Valves x 6 Hydraulic Core Pullers x 6 Control System with Hot Runners Injection Unit Hardened - Bimetal Rotary Table Diameter: 1200 mm Kistler Sensor - Mold Pressure Control Machine serviced by the authorized Arburg Service Center in Germany Dimensions: Weight: 7400 kg Length/Width/Height: 3.92 x 1.61 x 3.78 m Drive: Pump/Motor: 22 kW Heating power: 9.4 kW Total power: 31.4 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Dcodpfjzy Ihtex Afxol Price: Upon request

Condition: excellent (used), Year of construction: 2012, Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Side Robot Arburg Multilift H Year of manufacture: 04.2012 Injection Unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1650 bar Dosage volume: 474 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping unit: toggle lever Control system: SELOGICA - Touchscreen Dsdszy I Nkspfx Afxjcl Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Control system with air valve Core pull control Hot runner control x 12 Injection unit hardened - bimetallic Main drive motor - servo motor with inverter - energy saving Injection unit driven by servomotor controlled by inverter Machine equipped with cylinder / battery with compressed nitrogen (additional charge for fast operation) Central lubrication Automatic mold height adjustment Kistler sensor - mold pressure regulation The injection molding machine was operated in a so-called "cleanroom," and is fitted with extra protective devices against contamination and two vapor absorbers Side robot Arburg Multilift H Year of manufacture: 2012 5-axis robot: Z-axis driven by servo motor (electric); X, Y, and B axes (rotation) pneumatically operated Robot safety package Robot with adapter, conveyor belt with electric height adjustment, safety enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 6,820 kg Length/Width/Height: 5.03x1.56x2.21 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: not inspected (used), Year of construction: 1997, operating hours: 145,298 h, functionality: unexamined, machine/vehicle number: 31378, total length: 6,500 mm, total width: 2,000 mm, total height: 2,200 mm, A used machine from a site closure is being sold. Dedpfxszqabms Afxscl Sale is made excluding any warranty for defects. The machine has not been inspected but was in working order until the end. Weight approximately 9000 kg.

Condition: excellent (used), Year of construction: 2010, Arburg 470H 1000-400 e² / Hybrid Machine / Production Line with Arburg Multilift Select Robot Year of manufacture: 09.2010 Injection unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosage volume: 201 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 470x470 mm Platen size: 637x637 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy efficient and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 1 Hot runner control x 12 Hardened injection unit - Bimetal Main motor of the machine - Servo motor with inverter drive - energy saving The injection unit is driven by a servo motor controlled by an inverter Machine equipped with cylinder/bottle with compressed nitrogen (additional load for fast operation) Central lubrication Integrated sorting flap Arburg Multilift Select robot 6kg transverse Year of manufacture: 09.2010 4-axis robot: 3 axes driven by servo motors (electric); C-axis - pneumatic Travel paths in axes: X-400, Y-600, Z-1800 Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at extra cost Dodpfozy Iz Tsx Afxocl Dimensions: Weight: 5180 kg Length/Width/Height: 4.40x1.56x2.02 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 43222, clamping force: 2,750 kN, screw diameter: 70 mm, injection pressure: 1,441 bar, total height: 2,500 mm, overall weight: 20,000 kg, For sale is a used machine from a site closure. Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was in working order until the end. Dedpfx Afszrdhyjxocl

Condition: excellent (used), Year of construction: 2004, Arburg 320C 500-100 / Excellent technical condition Year of construction: 10.2004 Injection unit: Screw diameter: 25 mm Injection weight: 45 g Injection pressure: 2000 bar Metering volume: 49 ccm Dcjdpezy Iflefx Afxel Clamping unit: Clamping force: 50 t Distance between tie bars: 320x320 mm Size of the clamping platens: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: The machine is in excellent technical condition and was used for testing injection molds Operating hours: 25,739 h in automatic mode Total number of operating hours: 30,661 h Hydraulic core pull x 1 Reinforced injection units - bimetal Proportional valve on the injection unit - precise injection Built-in pressure quality control system from the Sensor Kistler brand - mold pressure measurement It is possible to change the screw diameter to smaller or larger: 20 mm or 30 mm Dimensions Weight: 2300 kg Length/width/height: 3.18x1.47x1.99 m Drive: Pump/motor: 15 kW Heating output: 4.9 kW Total output: 19.9 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 2003, operating hours: 39,000 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ARBURG Typ: 420C1300-350-60 Baujahr: 2003 Schließkraft: 130 Tonnen Holmabstand 420 x 420 mm Schnecken DN 1: 35 mm Spritzteilgewicht in PS: 127 g Dcodpfx Afoy Snapoxol Schnecke DN 2: 25 mm Spritzteilgewicht in PS: 45 g Steuerung: Selogica Ausstattung: .Kernzug -Roboter

Condition: excellent (used), Year of construction: 2007, Arburg 270C 400-70 Year of manufacture: 2007 Injection Unit: Screw diameter: 22 mm Shot weight: 31 g Injection pressure: 2000 bar Dosage volume: 34 ccm Clamping Unit: Clamping force: 40 t Tie bar spacing: 270x270 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface 2x air valves 1x hydraulic core pull Hot runner control Injection unit hardened - bimetallic Proportional valve on the injection unit – precise injection Screw diameter change possible Dimensions: Weight: 2370 kg Dodpszy Icdsfx Afxecl Length/Width/Height: 2.99x1.43x1.98 m All offered machines are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of construction: 09.2011 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 520x520 mm Dcedpfxozy I N Re Afxol Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total number of operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic, needle core pull, controlled by a proportional valve x 2 Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Screw diameter in the vertical spraying unit: ⌀25 mm - 45 g/hp Original turntable Purchase of the turntable for an additional charge Robot Wittmann W823 Year of construction: 2015 5-axis robot: 3 axes are driven by servo motors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot for an additional charge Dimensions Weight: 6720 kg Length/width/height: 4.41x1.84x3.20 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2008, Arburg OK-C S350-60 / Vertical injection molding machine with sliding table / Very good technical condition Year of manufacture: 2008 injection unit: screw diameter: 18 mm injection weight: 18 g injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit: Clamping force: 35 t tie bar distance: 0x0 mm size of clamping platens: 295x395 mm ejector: hydraulic clamping unit: hydraulic Dsdpfx Aezy Ibtsfxjcl Control system: SELOGICA - touch screen Additional equipment: Vertical injection molding machine with sliding table 3 stations on the sliding table Air valve x 4 Hydraulic core pull x 1 Control system with hot runners Injection unit hardened - bimetal Parallel movements Infrared protection curtains It is possible to change the screw diameter Dimensions: Weight: 2500 kg Length/width/height: 2.55x1.85x3.52 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 173340, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, plate length: 715 mm, plate height: 715 mm, total length: 5,360 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 6,900 kg, Equipment: documentation/manual, ARBURG ALLROUNDER 520 C 2000-675, hydraulic injection molding machine for plastics, year of manufacture 1998. The machine has a clamping force of 2,000 kN (200 tons) and an injection unit with a 50 mm diameter screw. Technical data: Manufacturer: ARBURG Model: ALLROUNDER 520 C 2000-675 Year of manufacture: 1998 Clamping force: 2,000 kN / 200 tons Injection unit: 675 Dedpszw Hnyjfx Afxecl Screw diameter: 50 mm Distance between columns: 520 × 520 mm Platen size: approximately 715 × 715 mm Opening stroke: approximately 650 mm Control: SELOGICA Condition: The machine was dismantled in perfect working order and is sold in its current condition. Operating hours are not available. The machine is available for viewing/inspection by appointment. Sale includes the injection molding machine only. The Cartesian robot and other components of the cell can be purchased separately.

Condition: excellent (used), Year of construction: 2003, Arburg 270S 250-60 U / Universal Machine Year of Manufacture: 2003 Dedpszy Ia Ajfx Afxjcl Injection Unit: Screw Diameter: 18 mm Shot Weight: 17 g Injection Pressure: 2500 bar Dosing Volume: 20 ccm Clamping Unit: Clamping Force: 25 t Tie Bar Spacing: 270x270 mm Platen Size: 400x400 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: SELOGICA - Touchscreen Additional Equipment: Universal machine - Injection unit can operate both vertically and horizontally Euromap 12 Robot interface Air valve x 4 Hydraulic core pull x 1 Control system with hot runner system x 8 Injection unit hardened - bimetal Proportional valve on the injection unit – precise injection Type of injection unit: Vario, allows the injection unit to be used, for example, for side injection Automatically opening cover Dimensions: Weight: 1900 kg Length/Width/Height: 2.89x1.11x1.85 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: good (used), Year of construction: 2004, functionality: fully functional, Clamping force: 1250 kN Screw diameter: 35 mm Djdpjwthfuefx Afxscl Tie bar spacing: 470 mm Shot weight: 142 g Minimum mould height: 300 mm Total weight: approx. 6,000 kg

Condition: excellent (used), Year of construction: 2001, Arburg 320C 600-250 / machine in very good technical condition Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 121 g Injection pressure: 1820 bar Metering volume: 144 ccm Dcedpfezy If Eox Afxjl Clamping unit: clamping force: 60 t tie bar distance: 320x320 mm size of clamping platens: 446x446 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Machine has produced molded parts for medical industry - pure production conditions Core pull control Injection unit hardened - bimetal Built-in sorting flap Dimensions: Weight: 2330 kg Length/width/height: 3.65x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 1998, Ferromatik Milacron K110D-S/2F / 2K injection molding machine Year of construction: 1998 Injection unit: Screw diameter: 30 mm Injection weight: approx. 85 g Injection pressure: 2298 bar Dosing volume: 99 ccm Clamping unit: Clamping force: 110 t Distance between tie bars: 470x470 mm Size of the clamping platens: 740x740 mm Ejector: hydraulic Clamping unit: hydraulic Control system: Ferromatik Milacron Additional equipment: 2-component injection molding machine Euromap 67 Robot interface Hydraulic core pull x 4 Control system with hot runners Injection unit is wear-resistant and resistant to corrosion Screw diameter in the vertical injection unit: ⌀25 mm - approx. 43 g/hp The machine has been regularly serviced The service center recently replaced the machine's cylinder with screw and the hydraulic valves with new ones Dimensions: Weight: 6300 kg Length/width/height: 5.00x1.60x3.60 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Dcjdpfx Ajzy Iikefxjl Price: On request