Used Injection Mold for sale (2,352)

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: 17659, total length: 11,000 mm, total width: 3,000 mm, total height: 2,600 mm, overall weight: 40,000 kg, Includes handling equipment, peripherals, and conveyor belt. Bwedpfxszrd Slj Afxjt A used machine is being sold as part of a site closure. Sale is made excluding any warranty for defects. The machine has not been inspected but was in working order until the end.

Condition: ready for operation (used), Year of construction: 1997, functionality: unexamined, machine/vehicle number: 39951, overall weight: 13,400 kg, Includes linear robot and peripherals. A used machine from a site closure is being sold. Sale is made excluding any warranty for defects. Bwjdpfozrd Rujx Afxst The machine has not been tested but was operational until the end.

Condition: not inspected (used), Year of construction: 1998, operating hours: 130,240 h, functionality: unexamined, machine/vehicle number: 34477, total length: 8,000 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 21,000 kg, includes handling linear robot A used machine from a site closure is being sold. Bsdszrd Aqjpfx Afxjwt Sale is made excluding any warranty for defects. The machine has not been inspected but was in working order until the end.

Condition: not inspected (used), Year of construction: 2000, operating hours: 104,771 h, functionality: unexamined, machine/vehicle number: 42221, total length: 8,000 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 21,000 kg, Includes linear robot. A used machine from a site closure is being sold. Sale is made with the exclusion of any warranty for defects. Bjdpfszrdl Sox Afxewt The machine has not been inspected but was operational until the end.

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 43222, clamping force: 2,750 kN, screw diameter: 70 mm, injection pressure: 1,441 bar, total height: 2,500 mm, overall weight: 20,000 kg, For sale is a used machine from a site closure. Sale is made with the exclusion of any warranty for defects. Bwjdszrdhyepfx Afxot The machine has not been inspected but was in working order until the end.

Condition: not inspected (used), Year of construction: 1991, operating hours: 108,378 h, functionality: unexamined, total length: 8,000 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 20,200 kg, For sale is a used machine from a site closure. Sale is made with the exclusion of any warranty for defects. Bsdpfszrczlex Afxowt The machine has not been inspected but was in working order until the end.

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 43225, total length: 5,500 mm, total width: 2,000 mm, overall weight: 6,000 kg, Small handling system installed in the machine. A used machine from a site closure is being sold. Sale is made excluding any warranty for defects. Bwsdszrb Spepfx Afxet The machine has not been tested but was operational until the very end.

Condition: excellent (used), Year of construction: 2009, operating hours: 78,099 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 25 mm, clearance between the columns: 520 mm, displacement volume: 71 cm³, injection pressure: 1,550 bar, injection weight: 65 g, opening stroke: 925 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, Arburg 520 S 1600 290/70 2K incl. Multilift H – a well-maintained, fully functional 2-component injection molding machine. The machine comes from a top-notch production facility. According to the operator, machine availability was always a top priority: the system was regularly and carefully maintained and operated continuously with additional oil filtration. It is in very good, operational condition and can be put into operation shortly after connection. Equipment and technical highlights: • Year of construction 2009 • 12.3 million cycles / 78,099 operating hours in automatic mode • 2-component version with horizontal injection unit 290 and vertical injection unit 70 • Injection unit 1: screw diameter 25 mm, max. 71 cm³ Bwodpexzix Ajfx Afxst • Injection unit 2: screw diameter 18 mm, max. 21 cm³ • Opening stroke 925 mm • Electric rotary table • 12-zone hot runner system integrated • 3 x core pull • 2 x blow-out, including control for needle valve • Interfaces for temperature controllers and dryers • Various customer-specific inputs and outputs Including Arburg Multilift H, load capacity 6 kg: • 2 x vacuum • 5 x double-acting grippers • Z-axis servo, 800 mm • C, G, X, and B axes pneumatic • Various inputs and outputs, including gripper monitoring The machine is fully functional. Documentation/manual available. An excellent opportunity for a user looking for a well-maintained and immediately usable 2K injection molding machine with automation.

Condition: like new (used), Year of construction: 2019, operating hours: 400 h, clamping force: 1,000 kN, screw diameter: 32 mm, displacement volume: 103 cm³, injection pressure: 2,200 bar, mold height (min.): 150 mm, ejector force: 25,000 N, ejector stroke: 100 mm, opening stroke: 350 mm, number of injections: 1, Equipment: documentation/manual, FANUC ROBOSHOT Alpha S100iA – like-new, fully electric precision injection molding machine, manufactured in 2019, with only 400 operating hours. Your advantages: • 1,000 kN clamping force • FANUC 31i-B CNC control with a 15-inch touchscreen • 32 mm screw and 103 cm³ injection volume • Injection speed up to 200 mm/s, maximum 2,200 bar • Hardened W/C plasticizing unit – for temperatures up to 350 °C and up to 30 % glass fiber • Euromap 67 robot interface Tool space and clamping unit: • Plate dimensions 660 × 610 mm • Tie bar spacing 460 × 410 mm • Mold height 150–620 mm, extended version • Opening stroke 350 mm • Ejector stroke 100 mm, ejector force 25 kN Bodpfx Aszrikmefxjwt Equipment includes, among other things: AI pressure and dosing control, tool and ejector protection, backflow monitoring, automatic tool height adjustment, energy consumption measurement, four-circuit flow meter, hopper slide, three-color LED signal light, three air valves, and cascade control for up to eight needle gate valves. Hungarian operating manual and warning instructions are available. A robot is not included in the scope of supply. Inspection by appointment. Further technical documents and the offer are available upon request.

Condition: good (used), Year of construction: 2023, operating hours: 50 h, Brand Ferromatik Milacron GmbH Type eQ-280 - 2290 Bwsdpfsw Ebpwsx Afxjt Year of manufacture 2023 Machine hours 50 hours Clamping force 2,800 kN Screw diameter 60 mm Injection pressure 2,238 bar Maximum shot volume 905 cm³ Max. distance between tie bars 710 x 660 mm Min. mould height 250 mm Distance between plates max. 1,400 mm Dimensions (LxWxH) 8,500 x 2,100 x 2,500 mm Weight 18,400 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, For sale is an injection moulding machine from the manufacturer Arburg, model 520 C 2000-800, year of manufacture 02/2006. Bwsdpfx Asw Hpwrofxot The machine is in a very good, well-maintained condition. An on-site inspection is possible at any time by prior telephone arrangement.

Condition: used, Year of construction: 1998, machine/vehicle number: 145893, clamping force: 350 kN, screw diameter: 25 mm, clearance between the columns: 221 mm, displacement volume: 56 cm³, injection pressure: 2,500 bar, For sale is an Arburg injection molding machine, type Allrounder 221-75-350. The machine is in used condition. Technical data: ARBURG Maschinenfabrik Hehl & Söhne GmbH & Co.KG Model / Type: Allrounder 221-75-350 Machine No. / Serial Number: 145893 Year of Manufacture: 1989 Machine Weight: 970 kg Clamping Force: 350 kN Clear Tie Bar Spacing: 221 mm x 221 mm Platen Dimensions: approx. 342 mm x 342 mm Opening Stroke / Stroke: 275 mm Tool Installation Height: 150 mm / 300 mm Max. Platen Distance: 425 mm Injection Unit: Screw Diameter: 22 mm / 25 mm Max. Injection Volume: up to 56 cm³ Max. Shot Weight: up to 50 g Specific Injection Pressure: up to 2500 bar Electrical Connection Values & Power: Operating Voltage: 380 V (3 phases) Mains Frequency: 50 Hz Heating Power: 3.46 kW Bwedpfszki N Tox Afxjt Pump Motor: 7.5 kW Total Power / Total Connected Load: 11.0 kW Upon request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT. Inspection possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase/Sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES, ETC. Gjbn N Ay Dowza Dxogoil Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2006, LWB Steinl VCRS-T 300/36 T / Machine like new Year of construction: 2006 Spraying unit: Bodozc I T Aepfx Afxowt Metering volume: 36 ccm Clamping unit: Clamping force: 30t Ejector: hydraulic Clamping unit: hydraulic Control system: LWB ECO Additional equipment: Hydraulic core pull x 1 Control unit with air valve The injection unit is made of bimetal Dimensions: Weight: 3000 kg All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2007, Battenfeld TM 100/525 Year of manufacture: 2007 injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Injection pressure: 2100 bar Metering volume: 251 ccm Clamping unit: clamping force: 100 t tie bar distance: 420x420 mm size of clamping platens: 640x640 mm ejector: hydraulic clamping unit: toggle lever Control system: UNILOG B2 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Control with hot runners x 12 Injection unit is wear resistant and resistant to corrosion Central lubrication Bwsdszc Nu Iepfx Afxot Automatic mold height adjustment Dimensions: Weight: 3900 kg Length/width/height: 4.46x1.33x1.78 m Drive: Pumps/motor: 18.5 kW Heating power: 12,1 kW Total power: 30.6 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2007, Engel Insert 80V/80V/100 2F / 2-K tie-bar-less machine, vertical / Perfect technical condition Year of construction: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Injection pressure: 1214 bar Dosing volume: 54 ccm Clamping unit: Clamping force: 100 t tie bar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control unit: CC 200 Additional equipment: Tie-bar-less machine with two vertical injection units, with turntable Air valve x 6 Bjdpfx Aezc Nx Tsfxswt Hydraulic core puller x 2 Control unit with hot runners x 12 Infrared safety curtains Thermoplastic and rubber injection units are available for this machine Turntable diameter: 1200 mm The machine has been regularly serviced by the authorized Engel service in Germany Dimensions Weight: 9400 kg Length/width/height: 4.85x1.47x2.30 m Drive: Pumps/motor: 30 kW Price: On request

Condition: excellent (used), Year of construction: 2004, Engel Victory 330/110 Tech / production line with robot Engel ER-HLI 41 and conveyor belt / machine in very good technical condition Year of manufacture: 2004 Injection unit: Screw diameter: 40 mm injection weight: 190 g Injection pressure: 1670 bar Metering volume: 201 ccm Clamping unit: clamping force: 110 t tie bar distance: 0x0 mm size of clamping platens: 790x680 mm ejector: hydraulic clamping unit: hydraulic Control system: CC 100 Additional equipment: Production line with integrated robot Engel ER-HLI 41 and conveyor belt. Tie-bar-less machine Hydraulic core puller x 1 Injection unit hardened - bimetal Machine serviced by authorized service Engel Machine with original protective housing to the robot and conveyor belt Dimensions: Weight: 7400 kg Length/width/height: 5.10x1.50x2.10 m Drive: Pumps/motor: 18.5 kW Heating power: 9,2 kW Total power: 27,7 kW Bodpfx Afszc Nykjxjwt All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2017, Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2017 Injection unit: Bwedpozc Nyqsfx Afxst Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 140 t Distance between tie bars: 0x0 mm Size of the clamping platens: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 in automatic mode Total number of operating hours: 25,369 h Euromap 67 Robot interface Air valve x 8 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Parallel movements Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Screw diameter in the vertical injection unit: ⌀25 mm - approx. 58 g/hp It is possible to purchase the original Foboha turntable for an additional charge Turntable diameter: 740 mm Sepro Multi Inject 20 robot Year of construction: 2017 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 10300 kg Length/width/height: 5.56x1.76x3.46 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Engel Victory 1350/260 Tech Ecodrive with Engel Viper 20 Robot / Hybrid Machine Year of Manufacture: 2011 Injection Unit: Screw diameter: 55 mm Shot weight: approx. 590 g Injection pressure: 2183 bar Dosage volume: 618 ccm Clamping Unit: Clamping force: 260 t Bsdjzc N Aropfx Afxowt Tie-bar spacing: 0x0 mm Platen size: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional Equipment: Production line with Engel Viper 20 Robot Machine in very good technical condition Tie-barless hybrid machine: energy-saving and very quiet 8x air valve on the fixed platen side 2x hydraulic core pull on the fixed platen side 2x hydraulic core pull on the moving platen side 18 hot runner control zones Injection unit is wear-resistant and corrosion-proof Main drive motor – servo motor with inverter – energy-saving Proportional valve on injection unit – precise injection Engel Viper 20 Robot Year of Manufacture: 2011 6-axis robot: 4 axes (X, Y, Z, B - rotation) driven electrically by servo motors; axes A and C – pneumatic Robot safety package Robot with adapter, conveyor belt, and Engel brand safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 19,400 kg Length/Width/Height: 7.06x2.03x2.30 m All offered machines are started and tested by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can attend live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2002, Arburg 420C 1300-675 with the sprue picker Star Year of manufacture: 2002 injection unit: Screw diameter: 50 mm injection weight: 297 g Injection pressure: 2080 bar Metering volume: 353 ccm Clamping unit: clamping force: 130 t tie bar distance: 420x420 mm size of clamping platens: 605x605 mm ejector: hydraulic Bodpfx Afszc N H Rjxjwt clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Injection unit hardened - bimetal Type of injection unit: Vario - this offers the possibility to use the injection unit e.g. for lateral spraying Covers from the operator side open automatically Dimensions: Weight: 4330 kg Length/width/height: 4.80x1.64x2.08 m Drive: Pumps/motor: 30 kW Heating power: 14,9 kW Total power: 44,9 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 117 g Injection pressure: 2500 bar Metering volume: 139 ccm Clamping unit : clamping force: 130 t tie bar distance : 470x470 mm size of clamping platens: 650x650 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The built-in system for control of pressure quality from the brand Sensor Kistler - measurement of mold pressure type of injection unit: Vario - it offers the possibility to use the injection unit e.g. for lateral injection The new injection unit is installed in the machine Dimensions: Weight: 5100 kg Bwodozc N Ihepfx Afxst Length/width/height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heating power: 10,2 kW Total power: 32,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2005, Arburg 470C 1500-150/150 / 2K machine / machine in very good technical condition Year of manufacture: 2005 injection unit: screw diameter: 25 mm injection weight: 49 g Injection pressure: 2500 bar Metering volume: 54 ccm Clamping unit : clamping force: 150 t tie bar distance: 470x470 mm size of clamping platens: 685x685 mm Ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: 2K machine Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection type of injection unit: Vario - this offers the possibility to use the injection unit e.g. for lateral spraying Parallel movements The vertical injection unit - screw diameter fi 25 mm (49 g/hp) It is possible to change screw diameters in both injection units for the screw diameters recommended by the manufacturer: 30, 35 mm Dimensions: Weight: 5700 kg Drive: Pumps/motor: 30 kW Heating power: 2 x 9,4 kW Total power: 48,8 kW Bwjdszc N Izspfx Afxjt All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2011, Arburg 520H 1500-400 e² / Hybrid Machine Year of manufacture: 2011 Injection unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosage volume: 201 cc Clamping unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping mechanism: toggle lever Control system: SELOGICA - touchscreen Bwedpjzc N Rvefx Afxot Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 on the fixed platen side Air valve x 3 on the moving platen side Hydraulic core pull x 1 on the fixed platen side Injection unit hardened - bimetal Main motor of the machine - servo motor driven by inverter - energy-saving The injection unit is driven by a servo motor controlled by an inverter Machine equipped with cylinder/battery with compressed nitrogen (additional charge for fast operation) Central lubrication Parallel movements Automatic mold height adjustment Dimensions: Weight: 6550 kg Length/Width/Height: 4.67x1.56x2.21 m All machines offered are started up and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Arburg Multilift H Side Robot Year of Manufacture: 2013 Injection Unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1,650 bar Dosage volume: 474 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping mechanism: toggle lever Bwjdpfx Aozc N Smsfxst Control system: SELOGICA – touchscreen Additional Equipment: Hybrid machine: high-speed, energy-efficient and very quiet Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Hot runner control x 12 Injection unit hardened – bimetallic Main machine motor – servo motor driven by frequency inverter – for energy savings Injection unit driven by a servo motor controlled by an inverter Machine equipped with cylinder/battery with compressed nitrogen (additional charge for fast operation) Centralized lubrication Automatic mold height adjustment Kistler sensor – mold pressure control The injection molding machine was operated in a so-called “cleaning room”, equipped with additional protective devices against contamination as well as two vapor absorbers Side robot Arburg Multilift H Year of manufacture: 2013 5-axis robot: Z-axis servo-driven (electric); X-, Y- and B-axis (rotation) pneumatically operated Robot safety package Robot with adapter, conveyor belt with electric height adjustment, safety enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 6,680 kg Length/width/height: 5.03x1.56x2.21 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Side Robot Arburg Multilift H Year of manufacture: 04.2012 Injection Unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1650 bar Dosage volume: 474 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping unit: toggle lever Control system: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Control system with air valve Core pull control Hot runner control x 12 Injection unit hardened - bimetallic Main drive motor - servo motor with inverter - energy saving Injection unit driven by servomotor controlled by inverter Machine equipped with cylinder / battery with compressed nitrogen (additional charge for fast operation) Central lubrication Automatic mold height adjustment Kistler sensor - mold pressure regulation Bwsdszc N Syspfx Afxst The injection molding machine was operated in a so-called "cleanroom," and is fitted with extra protective devices against contamination and two vapor absorbers Side robot Arburg Multilift H Year of manufacture: 2012 5-axis robot: Z-axis driven by servo motor (electric); X, Y, and B axes (rotation) pneumatically operated Robot safety package Robot with adapter, conveyor belt with electric height adjustment, safety enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 6,820 kg Length/Width/Height: 5.03x1.56x2.21 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of construction: 09.2011 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Bodpszc N Tkefx Afxswt Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total number of operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic, needle core pull, controlled by a proportional valve x 2 Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Screw diameter in the vertical spraying unit: ⌀25 mm - 45 g/hp Original turntable Purchase of the turntable for an additional charge Robot Wittmann W823 Year of construction: 2015 5-axis robot: 3 axes are driven by servo motors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot for an additional charge Dimensions Weight: 6720 kg Length/width/height: 4.41x1.84x3.20 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request