Used Microwave Furnace for sale (880)

Condition: excellent (used), TECHNICAL DATA This furnace system is for recrystallization, normalization, soft annealing, stress relief, annealing and conditionally suitable for soldering. belt width: 1000 mm Gbjdpegi Dv Defx Afnjh working height: 300 mm (over belt) heated length: 4250 mm electrical heating power: 300 kW heating zones: 4 heating temperature: 900 – 1120°C belt speed: 6 – 60 m/h (continuously adjustable) nominal connected load: 310 kW natural gas consumption: 50 Nm3/h natural gas pressure: 30 – 50 mbar nitrogen consumption: 70 Nm3/h – on purging nitrogen pressure: 100 mbar emergency cooling water pressure: 4-6 bar furnace length: 25298 mm furnace width: 2200 mm furnace height: 2800 mm exhaust gas quantity: 1200 m3 / h

Condition: used, El. heated pit furnace, make Borel with air circulator Gbedpfx Asvv Sw Isfnsh type: 11.85 temperature: max. 550°C connected load: 5 kW clear ø: 300 mm clear height: approx. 570 mm without control cabinet

Condition: used, Plasma-nitriding furnace, make Ipsen Gbsdpfxexc D E Hj Afnjh type: VVPH useable dimensions: ø800 x 1200 (H) mm charge weight: 600 kg gross heating power: 100 kW working temperature: 150 – 600°C PLC: Siemens S5 plasma generator: MAG-Puls QT 800/50/150-UP plasma generator: MAG-Puls was newly acquired in 2008

Condition: used, heating: electrical useable space: ø400 x 400 mm temperature: max. 1.300°C ventilation: exhaust fan during the cooling phase and activated cooling fan ultimate vacuum: 10 mbar exhaustion time: ca. 5 min nitrogen: inlet pressure min. 3 bar oxygen: inlet pressure min. 3 bar Gsdjv Sbc Eepfx Afnjbh

Condition: good (used), debinding and sintering chamber furnace, make Nabertherm type: LH 280/13 DBS temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 weight: 700 kg voltage: 400 V 3/N current consumption: 63 A - with an air heater under the furnace, pre-heated air with Gbodpfsmfn Ruox Afnoh a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - controllable cooling housing with autom. ball valve - automatic exhaust damper - automatic exhaust flap - monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor. -The furnaces themselves, particularly the brickwork, heating elements, and insulation, are in excellent condition with low or no working hours, making them practically like new. -To operate these furnaces, it will be necessary to implement at least one temperature controller per furnace, a PLC, or a similar control system.

Condition: refurbished (used), Roller hearth furnace, make Mahler type: RHEE 500/100/3000-6500 refurbished: 2016 max. charge weight: 40 kg/m nominal throughput: 288 kg/h clear roll width: 500 mm clear height above roll: 100 mm Gbjdpfx Afefc Hbdensh furnace length: approx. 22100 mm working temperature: - Warm-up zone: 800-1000°C - High temperature zone 800-1250°C heating: electric connected load: 400 kW gases used: nitrogen, hydrogen

Year of construction: 2024, condition: new, functionality: fully functional, Convection baking oven Powder furnace new SLS - 90 / O * D + t Transit oven divisible Memorized 1400 wide x 2000 height x 6500 depth Dimensions 1920 wide x 2810 height x 6800 depth Electric power supply Gjdpfx Aecutrljfnjbh Rated power 90 kW Voltage 380V Frequency 50-60 Hz Door type: 2 doors on either side - passage oven Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Homogeneity < ± 3 ° C, if 180 ° C Max < ± 3 ° C Temperature of 230 ° C Max Transport: selectable Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Door double two doors on two sides (Durschlaufofen) Divisible Motor 1,1 kW 6480 L capacity Warranty 12 months GERMAN-SPEAKING CONTACT IN GERMANY JUST ASK THEM Delivery time approximately 12 to 16 weeks after ordering Shipping costs will be calculated individually. Also plants according to your wishes. More information under Romer Germany Electrostàtica pintura, pintura en pole, powder coating, Jauhemaalaus, muovijauhetta, Peinture en poudre, thermoplastique, Verniciatura a polvere, Poederlakken, Порошковая окраска, Порошкове фарбування gemapulverbeschichtungskabine Powder coating plant Powder coating plant Powder coating cabin for powder coating Surface technology Powder gun Powder guns Einbren

Year of construction: 2008, condition: used, Protective gas conveyor belt furnace Working space: 600 mm wide, 200 mm high Gedpfev Ifzqex Afnsbh Electrical connection values: 3 x 400 volts, 50 hertz, approx. 300 kVA Heating: 10 pcs. Recuperator burner, make WS, connected load 400 kW gross Working temperature: max. 1150° C Heating zones: 5 Belt construction: mesh belt made of high-temperature-resistant steel, width approx. 600 mm Belt speed: adjustable from approx. 100-900 mm / minute Heating muffle: heat-resistant curved construction with bead reinforcements, length: approx. 6.85m, material: 1.4841 Cooling zones: Zone 1 approx. 1.5 m, Zone 2 approx. 4.0m, Zone 3 approx. 4.0m, Zone 4 approx. 3.0m Cooling zones made of normal steel sheet (St 37) as double-walled circulation cooling sections with measuring gas extraction nozzle, base plate 8mm thick Protective gas: nitrogen N2, hydrogen H2 Dimensions: working height approx. 1060 mm, heated length (5 zones) approx. 6000 mm, furnace length approx. 6900 mm, loading table approx. 1500 mm, unloading table approx. 1500 mm, total width approx. 2900 mm, total length approx. 30 m The system is available twice (built in 2008 and 2015)

Year of construction: 2008, condition: used, Protective gas conveyor belt furnace Working space: 700 mm wide, 230 mm high Electrical connection values: 3 x 400 volts, 50 hertz, approx. 160 kW Gbsdpfxov Imhxj Afnjh Heating: electric, heating coils, semiconductor relay "on/off" Working temperature: max. 1130° C Heating zones: 4 Belt construction: mesh belt made of high-temperature-resistant steel, width approx. 700 mm Belt speed: adjustable from approx. 50-800 mm / minute Cooling zones: cooling zone 1 as a wear part with insulation; 8mm base plate reinforced with beads, double-walled construction, length approx. 1.5 m, cooling zone 3 + 4 as double-walled convection cooling section Cooling zones made of normal steel sheet (St 37) as double-walled circulation cooling sections with measuring gas extraction nozzle Protective gas: Exogas, Endexo retorts with insulating flange installed in the furnace Dimensions: Working height approx. 1000 mm, heated length (4 zones) approx. 3750 mm, furnace length approx. 6000 mm, feed table approx. 1200 mm, total length approx. 20 m Furnace is available twice (built in 2008 and 2013)

Year of construction: 2008, condition: used, Protective gas conveyor belt furnace Working space: 450 mm wide, 140 mm high Electrical connection values: 3 x 400 volts, 50 hertz, approx. 185 kVA Gbsdpev Igcpjfx Afnsh Heating: electric, heating coils, thyristor control "on/off", heating output approx. 174 kW, output > 400 kg br. Working temperature: max. 1150° C Heating zones: 6 Belt construction: Mesh belt made of high-heat-resistant steel, width approx. 450 mm Belt speed: Adjustable from approx. 100-900 mm / minute Heating muffle: Heat-resistant curved construction with bead reinforcements, length: approx. 6.85m, material: 1.4841 Cooling zones: Zone 1 approx. 1 m, Zone 2 approx. 4.0m, Zone 3 approx. 4.0m, Zone 4 approx. 4m Cooling zones made of normal sheet steel (St 37) as double-walled circulation cooling sections with measuring gas extraction nozzles Protective gas: Nitrogen N2, Hydrogen H2 Dimensions: Working height approx. 1060 mm, heated length (6 zones) approx. 5800 mm, furnace length approx. 6600 mm, feed table approx. 10000 mm, removal table approx. 2000 mm, total width approx. 1900 mm, total length approx. 38 m, total height approx. 2100 mm

Year of construction: 1994, condition: used, Protective gas conveyor belt furnace Working space: 450 mm wide, 110 mm high Electrical connection values: 3 x 400 volts, 50 hertz Heating: electric, heating coils, semiconductor relay "on/off", 100 kW, capacity: approx. 200 kg / h Working temperature: max. 1100° C Heating zones: 6 Belt construction: mesh belt made of high-temperature-resistant steel, width approx. 450 mm Cooling zones: cooling zone 1 approx. 1.4 m, cooling zone 2 approx. 3.0 m, cooling zone 3 approx. 4.5 m Cooling zones made of normal sheet steel (St 37) as double-walled circulation cooling sections with measuring gas extraction nozzles Protective gas: nitrogen N2, hydrogen H2 Dimensions: heated length (6 zones) approx. 3500 mm, furnace length approx. 4600 mm, feed table approx. 5280 mm, removal table approx. 1500 mm, total width approx. 1800 mm, total height approx. 2100 mm, total length approx. 23 m Gjdpfxev Ipcxe Afnjbh No gas table included.

Year of construction: 2015, condition: used, external dimensions: lenght: 3900 mm width: 1320 mm height: 1090 mm (above base frame) muffle lenght: 3960 mm mesh belt: 480 mm width clear height 140 mm Gbodpjclupdofx Afnsh max. furnace area temperature: 750°C max. temperature inside the muffle: 700°C water cooled ventilators : 3 electrical connected loads: three-phase: 3 x 400 V, 50 Hz power consumption: 75 kVA heating power, 3 zones each: 24 kW = 72 kW PLC : Siemens S7

Year of construction: 2017, condition: good (used), functionality: fully functional, Furnace Housing Dimensions External dimensions: - approx. 3,800 x 4,300 x 2,200 mm Internal (usable) furnace dimensions: - approx. 2,440 x 1,400 x 1,200 mm Batch Load weight: - 9 boxes (net weight 50 kg/each) - approx. 250 kg material per box - stack arrangement 3x3 Performance Data - 1 gas recuperator burner - 160 kW rated heating capacity - Max. allowable chamber furnace temperature 720°C - Max. allowable post-combustion temperature 1,020°C - 1 temperature control zone Temperature Control Range - Chamber furnace 480°C – 700°C - Post-combustion 850°C – 1,000°C Supply Media - Natural gas L or H - Gas inlet pressure 80 mbar - Voltage 400 V - Frequency 50 Hz Godpsxcybksfx Afnebh - Connected load 8 kVA - Compressed air 6 bar, dry, oil-free Material: e.g. brass or bronze

Year of construction: 2024, condition: new, Horizontal Oil Quenching Furnace Technical details: Gsdpfjt D Tkusx Afnobh Size range: 450x350x300 up to 1200x800x800 Load capacity: 100 kg to 1200 kg Transferring duration: maximum 29sec, to lower than 17sec Ultimate temperature: 1320°C Final Vacuum: 10-1/10-4 Pa Temperature Uniformity Survey (TUS): ≤±5 °C Pressure Rise Rate: ≤0.5 Pa/h Cooling gas pressure:

Condition: ready for operation (used), Heat treatment furnace, annealing furnace, furnace, Used equipment Manufacturer: Budapest Electric Cable Factory Overall dimensions: 890 x 1350 x 1510 mm Weight: 785 kg Electrical data: 400 V, Temperature controller adjustable up to 1100°C Gbsdpouhmacjfx Afnsh +temperature controller in the electrical box

Condition: good (used), Laboratory Tube Furnace Naber R70/9 - Housing made of high quality structural steel. - The diameter of the tube is 70mm Godjdy Huyjpfx Afnebh - The length of the tube is 1000mm - Tube made of sillimantine, works with two end caps 60 - damaged on one side. - Silent electronic relay - Maximum temperature - 1200C - Temperature drop - 10 C / min - Programmable temperature curve

Condition: used, TECHNICAL DETAILS Quenching tank for stirring oil quenching - power : 0.25 [kW] - voltage : 3 x 380 [V] Gbsdpeug U Thefx Afneh

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: Seriennr.: 4046, Equipment: documentation/manual, Ingot casting belt 600 Gsdpeu S N Ahofx Afnjbh Zinc melting furnace ZSO 600 / 700 B

Year of construction: 2007, condition: repair required (used), functionality: not functional, Belt width: 650 mm, usable height: 220 mm, heated length: 3250 mm. The furnace has 3 heating zones and a heating capacity of 125 kW. The furnace has been stored in a hall for several years, and many components need to be sandblasted and repainted. In addition, the interior of the furnace needs to be relined, and some parts need to be newly manufactured. The furnace can also be completely overhauled by us to meet current technical standards. Gbjdpfx Aexdantjfnoh

Year of construction: 2020, condition: like new (used), functionality: fully functional, Fully automatic sintering continuous furnace system Manufacturer: Sarnes Model: 600-G/CQI-9 Year of manufacture: 2020 (commissioned 2021) Programmable, with online diagnostic system. Fuel: natural gas Hydrogen + nitrogen (N2+H2) operation integrated The system has seen very little use and is in excellent condition. Offer / Quotation Date: 18.1.19 620 mm belt width, gas heated, N2/H2 operation, LED dewaxing zone, rapid cooling section (Pos 2), flameless discharge and ceramic muffle, Heating: low NOx RS Rekudrall burners, SiSiC burner tubes, installed heating capacity 320 kW in 8 zones, dual thermocouples, 100 mm usable height. LED 3 dewaxing zones ("low energy dewaxing" – utilization of chemically bound energy of the waxes and improved burnout conditions especially for heavy PM parts (>0.9 kg)). Dimensions: Godpfx Afexfcdyonjbh - Infeed table 2 m (target-actual belt speed compensation) - LED3 dewaxing zone: 1.5 m - Sintering zone length 7.5 m - Rapid cooling length 1 m - Convective cooling zone length 2 x 4 m - Flameless discharge with air shower 2 m - Outfeed table 2.7 m - Total system length 23.7 m - Width 2.3 m Connection ratings: Heating: installed power 320 kW Natural gas: 25 m³/h (80 mbar) N2: 45-65 m³/h (max. 80 mbar) H2: 0.5 - 15 m³/h (80 mbar) Cooling water: 3-5 m³/h (non-pressurized; temp.

Condition: good (used), Year of construction: 2002, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Gedpjwg Hlasfx Afnobh Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, temperature: 630 °C, power: 450 kW (611.83 HP), plate length: 1,400 mm, plate width: 1,100 mm, TECHNICAL DETAILS Device type: Glass heating furnace for deep processing Application: Homogeneous heating and subsequent cooling of flat glass Suitable glass: clear float glass Maximum glass size: 1,400 × 1,100 mm Furnace Furnace width: 1,600 mm Opening/closing height: 500 mm Opening mechanism: electric Motor power for opening/closing: 1.5 kW Temperature: 630 °C Rollers Roller type: quartz rollers Roller diameter: 60 mm Number of quartz rollers: 46 Number of rollers in the cooling section: 22 Roller spacing: 100 mm Heating Heating system: electric with forced convection Heating power: 450 kW Control: PLC control with zone-dependent temperature regulation Speed Speed range: 1 – 10 m/min MACHINE DETAILS Supply voltage: 380 V Power supply: 3-phase, 5-wire AC Total weight: 10 t System configuration Components: Computer, control cabinet, power control cabinet, loading table, heating section, coating section, cooling section, unloading table Process sequence 1. Glass loading: The flat glass is placed on the loading table and transported into the heating section. 2. Heating: In the heating section, the glass is uniformly heated to high temperatures. 3. Coating: After heating, a special coating is applied in the coating section. 4. Cooling (Annealing): In the cooling section, the glass is uniformly and slowly cooled to reduce stress. 5. Glass unloading: The processed glass is conveyed to the unloading table and removed. EQUIPMENT - Computer - Control cabinet - Power control cabinet - Loading table - Heating section Gbedpfx Aswtfiqofnjh - Coating section - Cooling section - Unloading table - Zone-wise controllable heating system via PLC control - Forced convection system for uniform heat distribution - Quartz rollers with close spacing for precise glass guidance - Integrated cooling section with 22 rollers for controlled glass cooling The furnace has been dismantled into components of approximately two meters in length. This allows transport with standard trucks.

Condition: used, Anton Paar Synthos 3000 microwave oven Technical data Rotor 4x24MG5: Maximum volume: 5ml Gsdpfxjvgc T Is Afnsbh Working volume: 0.3-3.0ml Max. Working pressure: approx. 30 bar Max. Temperature: 80°C You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: ready for operation (used), Heraeus MR 260 annealing furnace Internal dimensions: 260mm x 500mm x 160mm ( W x D x H ) Space requirement: 1100mm x 700mm x 1560mm ( L x W x H ) Weight: 150 kg Gbodperm R Eyefx Afnjh Nominal temperature : 1000°C You are welcome to visit us for an inspection. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, Year of construction: 2013, operating hours: 6,000 h, functionality: fully functional, the following is included: - Hardening furnace (vacuum oil quenching furnace) - Control cabinet for hardening furnace Gbedpfjwlvhhsx Afnsh - Internal water tank with pump units and control box - Control box for water cooling - Internal nitrogen pressure vessel - External platform for cooling unit + connection points for nitrogen batteries (nitrogen battery containers not included, must be rented) - 7 hardening baskets - Red transport and loading trolley - Parts washing tank for complete baskets with compressed air and drip tray -> System has approx. 6,000 operating hours -> The pictures are up-to-date, only the date on the images is not correct