Used Split Saw for sale (6,991)

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 5 h, functionality: fully functional, ISELI BNR-100 – Fully Automatic Leveling Center for Bandsaw Blades The ISELI BNR-100 is a state-of-the-art, fully automatic leveling center designed for the complete processing of bandsaw blades in a single clamping operation. It combines leveling, tensioning, and straightening in one workflow, delivering consistently precise results thanks to its patented measuring and control technology. Operation is intuitive via a large touch display, offering a comprehensive process overview and flexible control. Key Features • Fully automatic complete processing (leveling, tensioning, straightening) of a bandsaw blade in a single clamping cycle. • High-resolution sensors and process-reliable control system (Linux-based). • User-friendly interface with touch-screen operation. • Freely programmable tensioning and straightening curves for efficient workflows. Nodpfox N Ib Uox Agzewr • Remote maintenance possible via VPN. Technical Data (Extract) • Blade width: 70–360 mm (depending on model) • Blade thickness: 0.8–2.1 mm • Blade length: from 5,000 mm or 8,000 mm (optional) • Working speed: 18 m/min • Power supply: 400 V / 50 Hz, compressed air connection 6 bar

Year of construction: 2021, condition: new, −−−− Panel Data −−−− − Type of panels: Particle board, MDF − Top panel face: raw, uncoated − Bottom panel face: raw, uncoated − Panel geometry: plane−parallel / not warped or bent − Panel density particle board: 550 kg/m3 − Panel density MDF: 650 kg/m3 − Panel length: 2500 − 2800 mm − Panel width: 1100 − 1250 mm − Panel thickness: 15 − 55 mm −−−− Multirip Circular Saw −−−− − Type of feeding system: automatic, locally provided − Application: Multi−ripping using a fixed saw set−up including edge−hogging on both sides − Edge hogging on the left: approx. 3.0 − 4.0 mm − Edge hogging on the right: approx. 3.0 − 4.0 mm − Minimum strip width: 32 mm − Maximum strip width: 45 mm − Tolerance on ripping width: +/− 0.2 mm − Feed speed: approx. 15 − 50 m/min. − Driving power top saw shaft: 55 kW − Driving power bottom saw shaft: 90 kW −−−− General −−−− − Working height: 900 mm − Operating voltage: 400 V/50 Hz, 3 phase (C1−C2−C3−N−PE // TN−C−S) − Number of dust extraction outlets: 4 − Diameter of dust extraction outlets: 250 mm − Air speed: 30 m/sec. − Dust extraction capacity: approx. 21200 m3 per hour MULTIRIP CIRCULAR SAW K34G−UU/1500 Right−hand design − Basic machine designed to accommodate two bottom saw shafts with hydraulic vertical adjustment, arranged one after the other, for the fixed set−up of circular saw blades or milling cutters − Hydraulic height adjustment of top rollers − Mechanical setting of top roller pressure − Continuous insert tables made of laminated wood placed above the saw shafts − Saw shaft loading carriage − Main dust extraction device at the bottom with outlets on the infeed and outfeed side − Noise and dust enclosure with viewing window − Door with safety interlock incorporated in the tilting machine hood on the driving side, for changing the saw shaft with the machine running − 9 bottom knurled steel feed rollers (7 powered) − 13 top polyurethane−ring covered feed rollers (all powered) − Max. saw blade diameter: 270 mm − Cardan feed drive system for top and bottom feed rollers (and brush rollers, if included), consisting of gearbox with ball bearing spur gears, axletrees serving as drive shafts in the area of the rollers to be driven, power transmission to the rollers via cardan joints − Built−in table with bevelled front edge, 250 mm − Speed of saw shafts 4500 rpm − Feed speed infinitely variable from 5 − 50 m/min. by frequency−controlled gear motor 2.2 kW, with normal accessories, without tools − In case of manual removal of the workpieces directly after the machine, the maximum feed speed must be limited to 35 m/min. according to the European regulations. CONTROL SYSTEM M34G MULTIRIP SAW CONTROL SYSTEM − Siemens SIMATIC HMI touch screen − 7" colour display − Siemens S7xx control − control equipped with remote maintenance and thus easy to service − controlled top roller height − controlled saw shaft height Njdoi Dylfjpfx Agzowr − product−specific programming possible (feed speed, material thickness, saw shaft height, ...) − interfaces to the locally provided master computer on inquiry − intuitive control due to the clearly arranged design − signal exchange with the workpiece feeding system − signal exchange with the workpiece removal system − "Industry 4.0 ready"

Condition: excellent (used), Saw blade Ø: 370 mm Cutting capacity at 90° round: 120 mm square: 100 mm rectangular: 180 x 100 mm at 45° round: 120 mm square: 100 mm at 60° round: 110 mm square: 90 mm Nodpfx Agsx Ek A Tjzowr 2 saw blade speeds: 15/70 rpm Drive motor: 400 V, 1.8/2.2 kW Required space: 1000 x 1000 x 1800 mm Weight: 390 kg

Condition: used, knife: HW WZ Z120 flight circle (ø): 500 mm Nwjdjrucqcopfx Agzor drilling: 30 mm width: 5.2/3.2mm material: steel Hole spacing: approx. 60 / 63 mm

Condition: used, heavy-duty precision panel saw SCM SI 550 E Class Version: Carpentry - Joinery Cutting length 3200 mm Cutting width approx. 1500 mm Main motor 11 kW 3 speeds: 2500/3000/4200 rpm Mitre fence with length compensation Saw blade up to Ø 550 mm Electric height adjustment and tilting of saw blade with digital displays Nodpfxsx Id Afe Agzswr Machine from retirement / first delivered in 2011 Machine is WORKSHOP TESTED and in EXCELLENT CONDITION Available from stock Lieboch

Condition: excellent (used), Catalog number 7707 TECHNICAL DATA - Maximum saw blade diameter: 500 mm - Spindle diameter: 30 mm - Pneumatic material clamp - Pneumatic blade stroke - Maximum cutting width: 800 mm - Cutting height: 135 mm - Pneumatic control system - Main motor power: 11 kW - Extraction port diameter: 2 x 110 mm - Table dimensions: 520 x 1550 mm - Table height from base: 810 mm Infeed roller table: - Dimensions (L/W/H): 2700 x 720 x 900 mm - Equipped with 3 pneumatic stops - Table fitted with guide rail - Roller size: 530 mm - 6 driven rollers, 1.5 kW Outfeed roller table: Nsdew Edigepfx Agzewr - Dimensions (L/W/H): 2050 x 700 x 800 mm - Roller size: 590 mm - 11 idler rollers - Equipped with 3 pneumatic stops Machine dimensions (L/W/H): 1900 x 1450 x 1600 mm - Total weight: 1500 kg ADVANTAGES - Supplied with two roller tables - Italian manufacture - Pneumatic control system - Pneumatic blade stroke (feed speed adjustable by handwheel) - Used saw in very good condition Net price: 33,900 PLN Net price: 8,070 EUR (based on the exchange rate of 4.2 PLN/EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: new, Year of construction: 2026, functionality: fully functional, BAS 100 (STA) – Upsetting machine for band and gang saws, automatically hydraulically controlled Upsetting the saw teeth, in addition to setting, is another method to ensure free cutting of the saw during machining. During the upsetting process, an upsetting pin is positioned in front of the saw tooth, while the tooth is held against an anvil. By rotating the eccentric upsetting pin, the saw blade material is displaced toward the tip of the tooth. Once the upsetting process is completed, the upsetting pin automatically returns to its original position. Nwedpfx Asv Tqzyegzsr

Condition: excellent (used), Year of construction: 2011, Cutting length 2,000 mm Cutting width 1,050 mm with manual adjustment and manual fine adjustment Manual height adjustment of the saw blade Angle stop, cutting lengths up to 3200 mm Drive power 5.5 kW with 3 speeds 3/4/5000 rpm. Cutting height max. approx. 140 mm Saw blade diameter max. 400 mm CE Nwjdpfx Ajp Duwcsgzor Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, knife: HW WZ-Z72 flight circle (ø): 494 mm drilling: 30 mm Nwsdpfx Agjtddxrjzsr width: 3,7 mm material: steel Available: 2

Condition: used, Diameter: 370 - 380 mm width: 3-5 mm drilling: 60 mm bolt circle: 100 mm * like new or sharpened, Nwedpfx Aolf I D Eogzer * 8 pieces, * suitable for Holzma OPT HPP 350 or similar.

Condition: used, Saw unit including cable and switch. engine: 0,24 kW Nwsdpfxjw Uz Rrs Agzsr number of revolutions: 2,700 rpm

Condition: used, suitable for UNITEC 10 or similar, Nsdpfx Aslkckmogzswr BJ 1998 CNC motor controlled, Number: 2 Price per piece: €2,000.00 + VAT

Condition: used, Pfeiffer Piccolo pendulum saw with a stable roller conveyor for cutting boards and beams. The machine features a pneumatic saw feed with safe two-hand operation. Video available upon request. Cutting height: max. approx. 120 mm Cutting width: max. approx. 600 mm Feed: Pneumatic cutting height: max. approx. 120 mm Nwedexrtzpjpfx Agzer cutting width: max. approx. 600 mm feed: Pneumatic roller conveyor: 250+360 cm

Condition: used, length: 950 mm Nedpfx Ajtvb Hhegzswr width: 600 mm cutting height: about 60 mm engine: 2,2 kW connection: 16A / 400V Mobile firewood saw for chopping strips, branches and other waste wood.

Condition: used, knife: HW WZ Z144 flight circle (ø): 500 mm drilling: 30 mm width: 3.5/4.8 mm Nedpswcpnpofx Agzewr material: steel

Condition: used, Striffler Type 2750-E double-cut miter saw for precise miter and cross-cut cuts in wood profiles, moldings, and frames. The machine is ideal for series production in window, door, and furniture construction thanks to two pneumatically pivoting saw units and electronic positioning. cutting length: about 2,200 mm miter angle: 45° – 90° workpiece: max. 50x70 mm Nsdpfx Asw D Dfxogzowr Further data: See PDF

Condition: used, Year of construction: 2022, Optimization cross-cut saw Weinig type OptiCut 260 for automatically cutting wood according to defects (fluorescent chalk) and lengths. The separate measuring station records the lengths and marked defects. Nodjx Ditfjpfx Agzjwr Technical specifications: tba saw blade ø: 500 mm input length: 400 - 6300 mm input thickness: 12 – 80 mm feed: max. 250 m/min cutting height: 260 mm bars: about 1 second saw motor: 7,5 kW marking station: 5.000 mm exit belt: 7,5 m Control: OptiCom Pro Construction year: 2022

Condition: used, 1200064 Cutting machine for grinding small circular saw blades. Nwedpfxjulffto Agzor saw blade ø: max. approx. 300 mm Saw blade ø: max. approx. 300 mm

Condition: used, cutting length: max. 4.000 mm Nedpjp E I S Rofx Agzewr saw blade ø: 400mm (max. 450mm) Length adjustment: Manually Angle adjustment: Manually Double-sided mitre saw Düspohl DGK 400 B for two-sided mitre cuts with saw unit from above and additional horizontal cutter (cornice function).

Condition: used, knife: HW-Z72 flight circle (ø): 500 mm Nsdpfx Astddxvogzjwr drilling: 30 mm width: 3,8 mm material: steel

Condition: used, Length: 950 mm Width: 600 mm Cutting height: approx. 60 mm Motor: 1.5 kW Connection: 220 V Mobile firewood saw for shredding battens, branches and other waste wood. Nsdpfx Astvb Hdegzewr

Condition: used, Circular saw blade or grooving saw in very good used or like new condition. D: 250 mm keyway: 20 mm Nodpjwrrdrjfx Agzewr diameter: 250 mm drilling: 70 mm width: 6,0 mm knife: 20 + 2 d: 70 mm B: 6,0 mm Z: 20+2

Condition: used, Multi-blade circular saw Waco Lamell 90 for sawing, trimming, ripping or grooving boards with new feed chain. Cutting height max. approx.: 100 mm chain width: 300 mm Clamping length approx.: 300 mm clamping length approx.: 300 mm Chain: New Function: Lowered chain in the cutting area function: Lowered chain in the cutting area Nodpfx Asw Ng T Usgzewr engine: 45 kW

Condition: used, Graule AGT combined sliding table saw. The sliding table saw can be tilted and pivoted. The machine can also be used as a sliding table saw only by removing the table. cutting height: 85/40 mm Nodpfx Agewqphlozowr cutting length: 380mm

Condition: used, Year of construction: 2004, Automatic optimization cross-cut saw (push-type saw) Dimter type OptiCut 700 for cross-cutting wide timbers according to defects (fluorescent chalk) and lengths. Without vacuum lifter. cutting height: Max. 120 mm cutting width: max. 700 mm input length: max. 5,300 mm Nsdex Eblvepfx Agzjwr