Used Turning Station for sale (12,555)

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25728, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm Ltsdpfx Agow Iqumezea -Weight: 16 kg

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,973 h, Control Unit Brand SIEMENS Model 840 D Main Drive Tool taper IMS 76 Number of axis 3 Lsdox D Nd Dspfx Agzota This 3-axis DMG MORI CTX Beta 800 4a was manufactured in 2014. It features a Siemens 840 D control system, a counter spindle, and a bar machine package for enhanced versatility. The machine includes a 980-liter coolant system and a hinge type conveyor for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2020, Swing over bed 880mm, Swing over saddle 817 mm, Maximum turning diameter 550mm, maximum turning length 3070mm, bar capacity 116.5mm, Y axis +/- 75mm, Spindle speed 2000rpm, Ltsdpfxox I N Rbs Agzsa milling speed 4,000rpm, spindle power 37/30KW, 12 station turret, Fanuc IPlus control. 3 jaw chuck, tool setter, Hydraulic steady, swarf conveyor,

Condition: ready for operation (used), chuck outer diameter: 700 mm, total height: 3,415 mm, controller model: Siemens 840D Solution Line, empty load weight: 17,000 kg, Type: Ultrix 800 RT The Ultrix 800 RT is a multifunction machining center with 5 interpolated axes and a moving gantry for high-speed milling, turning, grinding, drilling, tapping, finishing, deburring, and roughing of complex parts. Lsdpfx Aoxtgkasgzeta When used for turning vertical lathe: - swivel range: 1100 mm - maximum weight of the workpiece: 700 kg - 40/30 kW on the table - max. torque on the table: 1500 Nm - maximum speed of the table: 1000 rpm !! - hydraulic clamping on table - tool taper for turning: KM63 - 18 000 rpm - HSK 63 - 150-position tool changer with 24 tool positions for turning When used for milling, grinding, drilling, ... machining center: - X-axis: 800 mm - Y-axis: 900 mm - Z-axis: 600 mm - A-axis: -30° / 110° - C-axis: continuous - maximum weight of the workpiece: 700 kg - 55/40 kW on spindle - max. torque on the spindle: 22 Nm - max 40,000 rpm - tool taper for milling: HSK-E40 - 150-position tool changer with 126 tool positions for milling, grinding, drilling List of options mounted on the machine: 1 - 40,000 rpm high-speed spindle 2 - table dia 700 mm with hydraulic clamping 3-150-position tool changer 4 - chip conveyor belt 5 - cooling system with recovery 6 - coolant temperature control 7 - high pressure cooling (40 to 70 bar) by spindle 8 - smoke extraction system 9 - chip collection box 10 - Presetting system and tool integrity: laser and mechanical probe for measuring tools 11 - Renishaw probe Max turningdia -- passage: 1100 mm Power on the spindle: 40/30 kW Long: 4655 mm Wide: 5890 mm Turret: yes Qty Tools: 150 positions Coolant pump: yes

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details working diameter max. 32 mm spindle passage 36 mm turning length 320 mm Control MITSUBISHI MELDAS 635LC travel max. (X1) 108 mm travel max. (Y1) 275 mm travel max. (Z1) 325 mm travel max. (X3) 238 mm travel max. (Z3) 410 mm main spindle speeds: 200 - 8000 U/min c-axis 0,001° deg. Subspindle spindle speeds 200 - 7000 U/min c-axis 0,001° deg. rapid traverse 20 m/min main drive 3,7 / 5,5 kW Subspindle motor 1,5 / 2,2 kW Lsdsx Nm T Aspfx Agzeta dimensions of machine 2,77 x 1,24 x 1,79 m weight of the machine ca. 2850 kg Additional information CNC Swiss-Type Lathe First put into operation December 2005 The machine was used for a single shift and is in good condition with no maintenance backlog. Equipment: FMB Turbo 5-42/3200C bar loader, built 2004 High-pressure pump Many collet chucks for main spindle Various collets Drive unit for synchronously driven guide bush Synchronously driven guide bush Drive unit for transversely driven spindle on linear support Pick-up spindle Collet chuck for pick-up spindle Blow-out device for pick-up spindle Five fixed tool holders on the rear Workpiece removal device Coolant tank Central lubrication system Door lock Ejection device for workpieces with through holes Machine documentation The machine will be sold without tools and extraction system.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: G3169-0110, turning length: 530 mm, turning diameter: 420 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 220 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, overall weight: 4,700 kg, turning diameter over bed slide: 800 mm, HYUNDAI WIA L200SY CNC TURNING CENTER Year: 2012 | Fanuc 18i-TB CNC Control SN: G3169-0110 Ledpox I A Hcofx Agzjta • 5-Axis CNC Turning Center – Hyundai WIA L200SY • Main Chuck: 8″ | Sub Spindle: 5″ • Live Tooling & Y-Axis + C-Axis indexing • Max Turning Diameter: approx. 419–420 mm / 16.5″ • Max Turning Length: approx. 520–530 mm / ~20.5–20.9″ • Swing Over Bed: approx. 800 mm / 31.5″ • X Travel: approx. 220 mm / 8.7″ • Z Travel: approx. 550 mm / 21.7″ • Y Travel: approx. 80 mm / 3.1″ • Max Spindle Speed: up to 4,000 rpm • Main Spindle Power: ~20 HP (~15 kW) • Sub Spindle Speed up to 6,000 rpm • C-Axis indexing: 0.001° possible • Tool Stations: approx. 12 • Coolant system and chip conveyor included • Approx. Dimensions: 120″ × 68″ × 80″ • Approx. Weight: ~10,500 lbs (~4,760 kg) NOTE: MACHINE WAS REMOVED FROM GOOD WORKING CONDITION 2 YEARS AGO. PLANNED TO PUT BACK IN SERVICE BUT SELLER WILL NO LONGER BE DOING MACHINING.

Condition: good (used), The scope of delivery includes: 1x pallet transfer station, used Material color: RAL 5010 Gentian Blue Ljdpfx Ajwaiategzota Total height: approx. 2,200 mm Total width: approx. 1,500 mm Currently in stock: 1 unit Your contact person: Mr. Joachim Pollmann Mr. Thomas Barth General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Year of construction: 2015, operating hours: 48,086 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D Main Drive Number of spindles 2 Tool taper IMS 76 Number of axis 3 Tail Stock Ltedex D Ndwopfx Agzja Pinol tool taper VID 30 Tools Number of station 2x16 This 3-axis DMG MORI CTX Beta 800 4a was manufactured in 2015. It features a Siemens 840 D control, a main spindle and counter spindle, and a bar machine package for efficient operations. Ideal for complex turning and milling tasks, it includes a hinge type conveyor and a coolant system with multiple pressure settings. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Corner transfer unit, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with removal conveyor, transfer station -Transfer station: roller conveyor with conveyor belt, solid base frame, height adjustable -Speed: roller conveyor 20 m/min / conveyor belt 7 m/min -Conveyor rollers. Ø63 x 2500 mm Ltsdpsulp Apsfx Agzoa -Drive/gearbox: Nord 0.37 kW with frequency converter, see photos type plates -Lifting: pneumatic -Transport dimensions: 2825/1410/H870 mm -Weight: 580 kg

Condition: ready for operation (used), The positioner SILVESTRINI Mod. SA 1 ORBIT EL T5 are composed by: HEADSTOCK Section The structure in rugged electro-welded steelwork, supporting a motorized (horizontal axis) rotation system. The rotation is given by a gear motor that, by means of a pinion, meshes with a large slewing bearing, to which is fixed the ORBIT Structure. This section is equipped with lateral precision guides to permit the ORBIT vertical lifting movement. The elevation is hydraulic, by means of hydraulic piston on which are inserted special clamping safety valves, that prevent the fall of the table, in case of accidental breakage of tubes. On the horizontal axis is installed an electric rotating joint for the connexions with the Orbit table (vertical axis). This permits the total axes free rotation. MECHANICAL STRUCTURE ( ORBIT) It Is constructed in rugged electro-welded steelwork and holds a rotating table (motorized like the over mentioned headstock) that will support thу working pieces in high accuracy. Ltodox Imnqopfx Agzea A special bronze rotary earth connection (Silvestrini patent) transmits welding current. Technical specifications related to the workpieces: Cap: 5 ton Table dia: 1000 mm Max rotation speed of the table: 1 rpm Lifting stroke: 1000 mm Lifting speed: 700 mm

Condition: used, Year of construction: 2015, turning diameter 250 mm turning length 600 mm control FANUC Series 31i-Model A travel -x axis 180 mm travel -y axis +/-45 mm - - - - - Main spindle - - - - - - - - - - - turning speeds 0 - 5.000 U/min bar capacity 65 mm --- Subspindle --- - - - - - - turning speeds 0 - 7.000 U/min bar capacity 42 mm --- upper turret 1 --- - - - - - - numbers of positions in the tool changer 12 tool taper BMT 45 Number of axles X1 / Y1 / Z1 St. Tools speed 8.000 U/min --- upper turret 2 --- - - - numbers of positions in the tool changer 12 tool taper BMT 45 Lodpsx I Shpjfx Agzeta Tools speed 8.000 U/min Number of axles X3 /Y3 / Z3 St. --- lower turret 3 --- - - - numbers of positions in the tool changer 12 tool taper BMT 45 Number of axles X2 / Z2 St. Tools speed 8.000 U/min CNC Turning- and Milling Center | SPINNER - TTS 65 Triplex equipped with a main spindle and a sub-spindle, each including a C-axis, three triplex turrets designed for driven tools, as well as a bar feeder (Top Automazioni X-Files-S Series 3000, SX version). The machine has only 3.500h processing time hours. The machine is in good condition and can be inspected under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TTS65Triplex | TTS 65Triplex | TTS-65-Triplex | TTS-65 Triplex

Condition: good (used), Year of construction: 2009, operating hours: 48,570 h, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Make: MIYANO Model: ABX-64SY Year of manufacture: 2009 Ljdpfx Asxzrpwogzeta FANUC 31i control Driven tools Turret C-axis Parts conveyor belt Chip conveyor Parts gripper Multifeed bar loader

Condition: used, Year of construction: 1998, Control Siemens 840 D Ltodsx I Simopfx Agzoa swing diameter over slide rest 650 mm max. turning speeds 3800 min/-1 spindle diameter in front bearing 150 mm spindle bore 92 mm spindle head A8 DIN55026 number of tool places 2x 12 Pos. tool taper VDI 40 weight of the machine ca. 7,0 t In our opinion, the machines are in good used condition Condition and can be viewed under power by appointment. Technical features: - Nominal length: 1500 mm Accesories: - chip conveyor - Felsomat loading system - lathe chuck - milling body There are 2 identical machines available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Year of construction: 2014, condition: ready for operation (used), Control Unit Brand FANUC Movement Ledpfxex D Nkqo Agzjta X-Axis Movement 578 mm Z-Axis Movement 2033 mm Tail Stock Pinol tool taper Morse Taper MT6 Additional Equipment Stations: 12 Type: BMT75P Tooling: All tooling available, including boring bar holders, general turning tool holders, facing tools Collets: ER40 Collets This DOOSAN Puma 400LM was manufactured in 2014. A robust horizontal turning machine featuring a spindle speed of 1500 rpm and a 12 station turret BMT75P compatible with ER40 collets. It comes with a comprehensive set of tooling, including boring bar holders, general turning tool holders, and facing tools. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 400LM machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Corner transfer, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with puller conveyor, transfer station -Transfer station: 1x roller conveyor with conveyor belt, 1x conveyor belt Ledpfjrv Av Iox Agzjta -Base: solid base frame, height adjustable -Speed: roller conveyor 20 m/min / conveyor belt 23 m/min -Roller track: conveyor track rollers. Ø63 x 2500 mm, conveyor belt 17 x 2815 mm -Conveyor track: 6 belts 17 x 2830 mm -Drive/gearbox: North, see photos of nameplates -Transport dimensions: 2810/1660/H870 mm / 2900/920/H870 mm -Weight: 569 kg / 258 kg

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, spindle speed (max.): 2,000 rpm, turning diameter: 800 mm, turning length: 750 mm, controller model: Fanuc Oi-Td, Equipment: chip conveyor, TECHNICAL DETAILS Turning diameter: 800 mm Turning length: 750 mm Spindle power: 30 kW Ltedpfx Aox I Augjgzea Spindle speed: 2000 rpm Turret stations: 12 positions Chuck size: 21" MACHINE DETAILS Control: Fanuc Oi-Td Machine weight: 9,800 kg EQUIPMENT Chip conveyor

Condition: used, mileage: 54,125 km, power: 400 kW (543.85 HP), fuel type: gasoline, gearing type: automatic, first registration: 11/2014, next inspection (TÜV): 05/2024, fuel consumption (urban): 17.2 l/100km, fuel consumption (extra-urban): 11.8 l/100km, fuel consumption (combined): 13.8 l/100km, CO₂ emissions: 327 g/km, emission class: euro5, color: white, number of seats: 5, Equipment: air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, Special equipment: Equipment package: designo Exclusive, exterior mirror with blind spot assistant, entertainment system in the rear (2 screens), rim design: AMG 5-spoke (matt black), fire extinguisher, luggage compartment cover / roller blind, rear cup holder, rubber mats in the passenger / cargo area, interior: designo carbon trim, load protection net, LM rims 9.5x20, media interface (universal interface for iPod / AUX / USB / MP3), PTS parktronic system (front and rear), tire pressure monitoring system, reversing camera, electric sliding / tilting roof, transmitter for garage door opener (integrated), seat comfort package, Harman Kardon sound system with Logic7 surround system, TV tuner, analog and digital, preparation for mobile phone / convenience telephony / LTE-capable Other equipment: Lsdpfx Agjvnnidezjta Adaptive brake light, driver / passenger side airbag, ambient lighting, AMG optic/styling package 1, traction control (ASR), leather-covered dashboard, audio navigation system: APS COMAND autopilot system with hard drive navigation including integrated DVD changer, white/bichromatic exterior light, aspherical exterior mirror, left, electric exterior mirror. adjustable and heated, both, bi-xenon headlights, indicator light integrated in the exterior mirror, brake assistant, brake callipers painted red, chrome package, differential locks, automatic switch-on for driving lights, illuminated entry rails (stainless steel), electronic traction system (ETS), stainless steel exterior package, driver assistance system: hill start assist, electric windows front + rear, Alcantara roof liner, interior mirror with automatic dimming, Isofix mounts for child seat on rear seat, body: 5-door, catalytic converter controlled, automatic climate control (thermotronic), head airbag system (windowbag), headrests front NECK-PRO, fender flares, load anchors / lashing eyes, heated steering wheel with multifunction, metallic paint, engine 5.5 ltr. - 400 kW V8 KAT, wheelbase 2850 mm, split rear seat, low emissions according to Euro emissions standard 5, front left seat electrically adjustable (with memory), front right seat electrically. adjustable (with memory), seat cover/upholstery: designo leather 1-color, heated front seats, start/stop system, tinted glass All-wheel drive, ESP, ABS, ECO start-stop function, blind spot assistant, COMAND Online with DVD changer, TV tuner, Harman Kardon® Logic7® surround sound system, navigation system, rear view camera, Parktronic system (PTS), distance assistant DISTRONIC, anti-theft package, automatic climate control, sunroof, heated windshield, ambient lighting, leather interior, leather steering wheel, heated seats for driver and front passenger seats, seat comfort package, multi-contour seat for driver and front passenger, ISIFIX child seat anchors, stainless steel ram protection, side running boards, bi-xenon headlights, ball head trailer coupling / 3500, tire pressure monitoring, aluminum rims, vehicle can be covered with advertising and/or labeled.

Year of construction: 2021, operating hours: 3,415 h, condition: ready for operation (used), General Data Machine weight 4500 kg Control Unit Brand MAZATROL Main Drive Number of axis 2 Movement X-Axis Movement 425 mm Z-Axis Movement 600 mm Additional Equipment Collet chuck; 2x 3-jaw chuck Includes bar loader Ltodox Nr T Iepfx Agzoa This Mazak QTC 100 MSL horizontal turning machine was manufactured in 2021. Ideal for versatile machining operations. Consider the opportunity to buy this Mazak QTC 100 MSL horizontal turning machine. Contact us for more information. Application Types Turning

Condition: good (used), Corner transfer, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with puller conveyor -Transfer station: roller conveyor with conveyor belt, solid base frame, height adjustable -Speed: roller conveyor 51 m/min / conveyor belt 45 m/min -Conveyor rollers. Ø86 x 1415 mm rubberized wheels -Roller distance/axle distance: 205 mm -Belt spacing: 200 mm -Conveyor belt length: approx. 2290 mm, dimensions see technical photo. drawing -Drive/gearbox: 2x Nord, see photos of nameplates -Raising: hydraulic, without drive unit -Transport dimensions: 2480/2380/H810 mm -Weight: 1180 kg Ltodjrrzfgspfx Agzsa

Condition: ready for operation (used), Year of construction: 2012, operating hours: 35,385 h, Control Unit Brand SIEMENS General Data Machine weight 5500 kg Main Drive Spindle speed range 7500 Number of axis 3 Movement X-Axis Movement 400 mm Z-Axis Movement 200 mm Ltjdpfx Agjx Nr Skozoa Turret Number of turrets 1 Tools Number of station 12 Type of tool holder VDI 40 Media Internal cooling Yes Additional Equipment Tool Storage: Conveyor belt for max. 27 workpieces Workpiece Feed: Vibratory spiral conveyor, vibrating plate, single workpiece feed Handling Robot: 8-axis Protective Enclosure: Robot cell Scraper Belt Conveyor Oil Mist Extraction Cooling System: Cooling capacity 3 kW Chip Container: 700x700x600 mm It's System of 2 EMAG VL03 vertical turning machines that were manufactured in 2012 and 2010. It features a Fanuc control system, Series 32i-Model A, with a travel range of 400x200mm and a spindle speed of up to 7,500 rpm. The system machine includes a 12-station tool turret with VDI 40 tool holders and a tool drive of 6,000 rpm. Consider the opportunity to buy this vertical turning machine system with robot included. Contact us for more information about this system. Application Types Turning

Year of construction: 2011, condition: ready for operation (used), General Data Measurements width 1120 mm Measurements depth 4400 mm Measurements height 1430 mm Machine weight 3920 kg Main Drive Spindle speed range 1600 Spindle bore 80 mm Tool taper MT 7 Workpiece Workpiece drm over bed 560 mm Workpiece drm over support 350 mm Workpiece weight 600 kg Tail Stock Pinol diameter 75 mm Pinol tool taper MK 5 Additional Equipment Lead Screw Thread Pitch: 6mm Longitudinal Feed [mm/rev] in the Range: 0.059 - 1.646 Cross Feed [mm/rev] in the Range: 0.020 - 0.573 Metric Pitch [mm/rev] in the Range: 0.2 - 14 Inch Pitch [Threads/Inch] in the Range: 112 - 2 Modular Threads in the Range: 0.1 - 7 Diametrical Threads (ISO 678) in the Range: 4 - 112 This Optimum D 560x3000 was manufactured in 2011. It features a spindle bore of 80 mm, a swing diameter over bed of 560 mm, and a maximum workpiece weight of 600 kg. The machine offers a spindle speed up to 1600 rpm and includes a coolant pump. Ideal for precision turning operations. Contact us for more information. Application Types Ljdox Nr S Rjpfx Agzsta Turning

Year of construction: 1999, condition: ready for operation (used), Main Drive Spindle motor power 22 kW Number of axis 3 Lodpsx Nr S Defx Agzjta Movement X-Axis Rapid Traverse 30500 mm/min Z-Axis Rapid Traverse 33000 mm/min Turret Number of turrets 2 Number of tool slots 12 This 3-axis Mazak Multiplex 6200 was manufactured in 1999 and features dual spindles with a maximum speed of 5,000 rpm and a drive power of 22/15 kW each. It includes an ABB robot and turrets on both the right and left with 12 tools each. Rapid traverse rates are 30.5 m/min for the X-axis and 33 m/min for the Z-axis. If you are looking to get high-quality turning capabilities consider the Mazak Multiplex 6200 machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2014, condition: ready for operation (used), General Data Machine weight 15500 kg Main Drive Number of axis 7 Spindle Speed 4000 RPM Spindle motor power 22 kW Control Unit Brand FANUC Model Series 31i-MODEL B5 Movement X-Axis Movement 630 mm Z-Axis Movement 1585 mm Y-Axis Movement 115 mm This 7-axis DOOSAN Puma MX2600ST was manufactured in 2014, featuring a robust horizontal turning machine design. It includes a B-axis of +/-120 degrees, extensive X, Y, Z travels, and a bar capacity of 76mm. The machine is equipped with a FANUC 31i-Model B5 control, a 40 station tool changer, and a 22kW spindle motor. If you are looking to get high-quality turning capabilities consider the DOOSAN Puma MX2600ST machine we have for sale. Contact us for more information. Application Types Ltjdpfx Agsx D E Raszsa Turning

Year of construction: 2001, condition: ready for operation (used), Control Unit Brand HAAS This 3-axis HAAS ST-30 was manufactured in 2001. A robust horizontal turning machine featuring a 3400 rpm spindle, Ø76mm bore, and a 10" chuck. It includes a tailstock, 12 x VDI40 tool stations, a toolsetter, and a conveyor. If you are looking to get high-quality turning capabilities consider the HAAS ST-30 machine we have for sale. Contact us for more information. Ledjx H Uzvjpfx Agzota Application Types Turning

Year of construction: 2011, condition: ready for operation (used), Control Unit Brand HAAS This 3-axis HAAS ST-30 horizontal turning machine was manufactured in 2011. It features a 10" chuck, 3400 rpm spindle speed, live tooling with a C-axis, a toolsetter, and a conveyor. It also includes a 12 x VDI40 turret and a tailstock. If you are looking to get high-quality turning capabilities, consider the HAAS ST-30 machine we have for sale. Contact us for more information. Ljdpfox H Uz Ajx Agzjta Application Types Turning