Condition: used, Year of construction: 1988, type KR 125L100/2 serial number 774459 Year 1988 Cgob Ha Aswhqx Hs Nxot weight 975 kg

Condition: used, Heraeus Vötsch Type: VT 7010 Air-Cooled Temperature Test Chamber 100 Liter Test Chamber Volume Housing Dimensions: Width 820 mm, Depth 840 mm, Height 1670 mm Internal Dimensions: Width 550 mm, Depth 350 mm, Height 550 mm Temperature Range -70°C to +180°C Temperature Deviation Temporarily ± 1 K Temperature Deviation Spatially ± 2 K Side Feedthrough 80 mm ∅ 80 mm ∅ Refrigerant: R-404A / R-23 Voltage: 1/N/PE AC 230V ±10% 50Hz Rated Power 3.2 kW Rated Current 14.5 A Weight: 260 kg For your safety, please note the following information as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary Cjb Ha A Njwhmdrjxjgt 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 23,371 h, Functionality: fully functional, pressing force: 78 t, bale weight: 600 kg, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK1 Year of construction 2012 Total machine operating hours 23,371 hours, as of May 2024 Pump operating hours, effective 13,331 hours, as of May 2024 Cgob Ha A Nevwlqqoxjt Number of bales pressed 222,492 pieces, as of May 2024 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine is currently in our workshop undergoing a partial overhaul and general maintenance work. After completion of the overhaul work, the press will be tested in operation and is expected to be available for sale from mid/end of May 2025. Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, The scope of delivery includes: Heavy-duty anchor, HST2 Order quantity: 25 pieces Manufacturer: Hilti Cjbjwhflue Ha A Nxogt Design: Galvanized carbon steel Approved for: Cracked concrete Through-hole installation: + pre-positioned installation Diameter: M12 Drill hole diameter depth: 12 x 88 mm Nominal anchorage depth: 80 mm Effective anchorage depth: 70 mm Anchor length: 105 mm Clamping strength: 10 mm Weight per piece: 0.080 kg Weight per carton: 2.480 kg Your contact persons: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: refurbished (used), Year of construction: 2008, machine/vehicle number: R-00433, arm reach: 1,420 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, payload: 10 kg, Refurbished FANUC M-10iA manufactured in 2008.06. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-10iA Model Number: A05B-1221-B402 Year of Manufacture Robot: 2008.06 Warranty term (months): 12   Payload (kg): 10 Reach (mm): 1420 Repeatability (mm): ± 0.08 Cgsb Haswhiids A Nxot Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 130   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2008.06 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10

Condition: used, Year of construction: 1995, cutting diameter 260 mm saw band length 3830 x 27 x 0,9 mm cutting range flat 310 x 260 mm cutting range square 260 x 260 mm cutting speed stufenlos 19-110 m/min Cgebowhqxme Ha A Nxst feed length 750 mm multiple feeding length 6750 mm height of material-table 700 mm weight of the machine ca. 2,1 t dimensions ca. 2100x2300x1720/1300 mm

Condition: used, Year of construction: 1999, 264 working width 3200 mm sheet thickness - max. 6 mm Cjb Ha A Newhq D Aoxogt output 10,5 kw weight of the machine ca. 6580 KG

Condition: ready for operation (used), Hydraulic shear LVD HST-C 40/8 Year of construction 2005 Serial number 29992 Technical specifications Max sheet thickness 8 mm Cutting length 4050 mm Back gauge range 1000 mm Cutting angle 0.5°-2° Blade clearance 0,05-1.2 mm Number of strokes per min 10-40 Number of hold dawns 21 motor 15kW weight 13000 kg oil 250l Voltage 3 x 380V Options included : Command control PNC20 for adjustment of back gauge, cutting angle and blade clearance Security norms CE 1 square arm from support L1500mm Cob Ha Aowaa T Re Nxegt 1 extra support L1500mm

Condition: reconditioned (used), Year of construction: 2015, operating hours: 28,748 h, Functionality: fully functional, pressing force: 60 t, bale weight: 570 kg, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), volume flow: 350 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 28,748 hours, as of November 2024 Effective pump running time 6,239 hours, as of November 2024 Number of pressed bales 110,122 bales, as of November 2024 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Comments: Cjbovn Tg Ij Ha A Nxjgt The machine is currently in our workshop for overhaul. We assume that the press will be completely overhauled in approx. 4 weeks and can then be tested. The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 15024 Complete crushing plant for sale Metso 125 jaw crusher, 2008 model Metso GP 550 crusher, 2009 model Metso GP 300 crusher, 2012 model Locomotive A 132 coarse gauge, 1991 model Sizer, DP 2016 sight, 2016 model Terex TSH 7203-38 screen, 2013 model Cgjb Ha A Nevg Nk Hjxot Metso FS 353 sieve, 2009 model 34 conveyor belts, varying length and width 5 pcs Band weights Control/control room, 1 piece 20-foot container Electrical room/distribution room, 2 20-foot containers The facility is in daily use. See video.  

Condition: used, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 06/2019, Year of construction: 2019, total width: 2,600 mm, total height: 2,650 mm, ID: 5512-217452 All our vehicles and the latest offers - Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminum barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tires - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro pallets Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets Csbjwhbyhe Ha A Nxogt

Condition: used, Year of construction: 2013, Overview  This Wirehooder was manufactured in 2013 by SICK INTERNATIONAL in Germany. The machine is available for immediate sale, as the production in the factory was stopped in 2022. The platforms for the operator are included. Technical data  Capacity: 9,000 bph to 12,000 bph Formats: Cork caps for cider and champagne glass bottles (75cl) Dimensions: L. 200 cm - W. 150 cm - H. 250 cm Scope of Delivery  Wirehooder Operator platforms Cgeb Hjwhk Dvsa A Nxst

Year of construction: 1989, Condition: used, Axis 3 serial number 84095 tool taper BT40 toll turrets 12 table surface area 1300 x 400 mm no. of flutes 3 T-Nuten T-slot - width 18 mm control FANUC dimensions ca. 3000 x 2500 x 2500 mm Csb Hajwhqz Ue A Nxegt

Condition: reconditioned (used), Year of construction: 2002, operating hours: 43,954 h, Functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale height: 1,100 mm, bale width: 1,100 mm, overall weight: 50,800 kg, oil tank capacity: 3,100 l, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002 Operating hours 43,954 hours, stand March Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Cgeb Hou Thgzea A Nxet Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 112 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine is currently in our workshop for overhaul. We assume that the press will be completely overhauled in approx. 4 weeks and can then be tested. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2018, operating hours: 7,900 h, Field of application: Construction Serial number: 312716-Cxxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19079 Specifications: - 2018 model - Certified until 05.25 - Hours: Approx. 7900 - Weight: 34,000 - Undercarriage (see pictures) - Belt width: 60 cm - Total width: Approx. 3 m - Tilt cabin - Rototilt - Oilqucik Csb Hevgz Spea A Nxjgt - Only 1 owner - Reversing camera - Side camera - Range: Approx. - Central grease - Webasto - Extra fendering - Extra counterweight lot - Radio/CD - Climate/AC - On gold agreement with Volvo - Video - Ready for delivery Description: Volvo EC300ENL from 2018 with 7900 hours. The machines have a cabin and have entered into a gold agreement with Volvo. It is sold with rototilt and oilquick. Ready for delivery. Hours: 7900 Total Weight: 34000

Condition: used, mileage: 495,157 km, power: 331 kW (450.03 HP), first registration: 07/2021, overall weight: 8,263 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Year of construction: 2021, ID: 7732-533813 All our vehicles and the latest offers - Features BigSpace L-cab, Actros model generation 5, wheelbase 3850 mm Engine version Euro VI, D, 449 Hp, 330kW (449hp), 2200 Nm, Batteries 2 x 12 V/220 Ah, low-maintenance Mercedes PowerShift 3 Transmission, High Performance Engine Brake ADR type class AT Tank, 820l+90l AdBlue, left, 735x700x2170 alu., step, Second tank, 430 l, right, 735 x 700 x 1000 mm, alu. Driver comfort Automatic climate control, Power windows, all-round Driver's suspension seat, comfort, Multifunction steering wheel Co-driver's suspension seat, comfort, Armrests on both sides, co-driver's seat Smoker package Auxiliary hot water heater, cab Pull-out refrigerator, under bed Flexible shelving sys.,f. stowage above windscreen, Drawers, under bed, Drawer, under dash support Tilting sunroof, electric, Sunblind, side, driver's side, Sun visor, exterior, transparent Luxury bed, top, narrow, Luxury bed, bottom Technical specifications Dig. tachograph, 2nd gen., working speed control Disc brakes on front and rear axle Electronic braking system with ABS and ASR, Stability Control Assist (ESP) Front spring, 7.5 t, 2-leaf Rear axle - air Tires 315/70R22.5 Drive program fleet, Navigation system Fifth wheel coupling, standard, Jost JSK 37C Axle load measuring device Heat insulation, additional Safety Cruise control Predictive Powertrain Control Lane Keeping Assist, Traffic Sign Assist Attention Assist Active Brake Assist 5 Technology Multimedia Cockpit, interactive, Preinstallation Mercedes-Benz Truck App Portal, Standard loudspeake Truck Data Center 7 FleetBoard Eco Support, Interface, fleet management system FMS Exterior Fully painted cab LED daytime running lamps, Bi-xenon headlamps, Foglamps, halogen Headlamp cleaning system, Side marker lights, Ambient lighting Air deflectors, corner panels, Kerb mirror Front mirror, heated, MirrorCam, MirrorCam switch, on bed Locking system, with central locking, 2 remote control keys Cgeb Ha A Nowhbynexjt

Condition: used, Year of construction: 1996, serial number B024D04184T fork length 1050- 1220 mm weight 9640 kg size of tire 28 x 12 x 22 size of tire hinten 22 x 8 x 16 70 % height of stroke 4600 mm Cob Haowhq Axj A Nxogt

Condition: good (used), Year of construction: 2000, operating hours: 32,169 h, Functionality: fully functional, pressing force: 60 t, bale weight: 750 kg, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale height: 720 mm, bale width: 1,100 mm, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology with personnel protection system, baling press, bale chute and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Cgsbsviwdme Ha A Nxet Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor with personnel protection system 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 1 bale chute 2 wire stations with deflection rollers for 10 wire reel stands (without wire) Comments: The machine is currently in our workshop for overhaul. We assume that the press will be completely overhauled in approx. 4 weeks and can then be tested. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2006, Condition: used, Please contact ATS Norway AS for more information Please provide reference number upon request: 19339 Description: Lack of control Cgeb Hsvg Aqgea A Nxst Complete with engine and generator Stored inside Ready for delivery

Condition: used, overall weight: 8,507 kg, axle configuration: 3 axles, first registration: 01/2020, Year of construction: 2020, total width: 2,460 mm, total height: 2,650 mm, ID: 3559-224509 All our vehicles and the latest offers - Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 45 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminum barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tires - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro pallets Length/width/heigth - 1341cm/249cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets Cob Ha A Njwhbybsxegt

Year of construction: 1975, Condition: used, lifting capacity 5 to. Csb Ha Aowhq Alo Nxegt fine hub ja weight of the machine ca. 3,4 t

Condition: used, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 08/2019, Year of construction: 2019, total width: 2,600 mm, total height: 2,650 mm, ID: 9618-223729 All our vehicles and the latest offers - Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminum barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tires - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro pallets Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets Cjbswhbx Rj Ha A Nxsgt

Condition: used, Year of construction: 2000, . max. swing diameter 460 mm hollow 66 mm digital . multifix . centre distance 1000 mm feed: . weight of the machine ca. 1,8 t +++++ Please note: Cgsb Ha Aowhqzuo Nxst The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1988, table width 70 mm ja weight of the machine ca. 115 t Cgjb Haswhqzns A Nxst +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1996, 1400 mm table-size 2000 x 1300 mm Motor output 75 kW 1040 mm +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Cob Ha A Nowhqy Rjxsgt +++++