Used Center lathes 400-499mm turning diameter over bed for sale (208)

Condition: new, Precision control and lathe Make: OPTiturn Model: TH 4210 Item No.: 3462050 Condition: new machine Tip height: 210 mm Top width: 1,000 mm equipped as standard with: -Machine base -Quad steel holder -Light machine -Reducing bushing MK 6 / MK 4 -2 fixed centres MK 4 -Fixed bezel, 15-105 mm -Bezel running with 10-65 mm -Chuck guard, electrically protected -Coolant system -Change gears set Csbu Ufjdbgxconwegt -Oil -Control tool -Manual

Condition: good (used), center height: 190 mm, center width: 1,250 mm, overall weight: 1,500 kg, Lead and feed screw lathe Colchester -WAG 813 On offer here is a lead screw and feed screw lathe from Colchester Technical data: Manufacturer: Colchester Type: Triumph2000 Speeds: 25-2000 rpm Top height: 190 mm Center distance: 1250 mm Machine dimensions: (w x d x h) 1200 mm x 2500 mm x 1700 mm Cgjbu Ufnsr Iim Howot Power connection / control voltage: 380 Volt General / technical data: Used lead and feed spindle lathe from English production with original Multifix tool holder system in good condition. The machine has a 3-axis digital readout. The machine also has a chip guard. Accessories / special equipment: Forkhardt wedge bar chuck (power chuck)

Condition: like new (used), Year of construction: 2017, operating hours: 300 h, Functionality: fully functional, machine/vehicle number: 20161259/2017, Filling system for all liquids. The system was used to fill disinfectant bottles. The system was put into operation in 2017 and is still as good as new, having only been in operation for a few hundred hours. The article produced was only sold during Corona. It is also possible to purchase the complete product. Cgebusvmnkrj Ufnwjt Unfortunately there are only a few photos, but we would be happy to send you a video of the system in operation.

Condition: used, L+Z-Drehmaschine, Fabr. VDF Boehringer, Typ 48S, Bj 1967, SN 70.1025.002846, Spitzenweite 1.500 mm, Ø 480 mm, Werkzeug-Schnellspannvorrichtung, Werkzeugschrank, Metall, 2-türig, m. Inhalt Csbju Avfgju Ufnwogt

Condition: new, TC 180 x 1000 V Tip width: 1000 mm Center height: 178 mm Circumferential diameter over bed: Ø 356 mm Bed width: 190 mm Cross slide travel: 160 mm Travel distance top slide: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm Max. Chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2500 1/min Mechanical feed stages: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Face feeds X: (40) 0.022 - 0.98 mm/rev Metric thread: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 Gg/inch Thread module: (32) 0.4 - 7.0 Diametral thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner taper of quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Dimensions, approx.: 1880 x 880 x 1390 mm Features: - Acceptance certificate according to DIN - Precise, hardened and ground guides - Robust headstock with circulating oil lubrication, precision bearing-mounted spindle, hardened and ground gears for long-lasting quality - Electromagnetic spindle brake (TC), frequency converter with electric braking device (V models) - Torsion-resistant machine beds made of MEEHANITE quality casting, stress-free annealed and multi-ribbed for extremely smooth running - Electrical equipment from SIEMENS/SCHNEIDER - Overload protection for feed gearbox - Pulse button for main spindle - CE / IEC as well as German documentation and German service Basic equipment (standard accessories): - Machine stand with splash guard rear panel - 3-jaw lathe chuck - 4-fold steel holder - Foot pedal with mech. brake device - Coolant device - Chuck guard and spindle cover in accordance with European safety standards CE - 1 Fixed center point for main spindle - 1 Fixed center point MK3 - 1 Test report - Safety devices and electrical equipment according to CE - Reducing sleeve for main spindle Operating tool Available options for this lathe: - 3-axis digital readout - Quick-change holder system Multifix Cjbeir Imysu Ufnwegt also available as gearbox variants

Condition: new, Year of construction: 2024, For delivery times and current prices, please contact us directly. Dimensions and weights: Length (product): approx.1935mm Width/depth (product): approx.780mm Height (product): approx.1740mm Weight (net): approx.765kg Working ranges: Center height: 200mm Center width: 1000mm Rotation diameter over machine bed: 400mm Swing diameter over cross slide: 250mm Speed range: Number of speed ranges: 8 Speed range: 70 - 2000min¯¹ Electrical data: Drive motor power: 2.2kW Supply voltage: 400V Mains frequency: 50Hz Cooling lubricant system: Cooling lubricant system Coolant pump power: 100W Spindle: Steel holder: SWH 3-E Spindle holder: Camlock DIN ISO 702-2 No.5 Spindle bore/bar passage diameter: 53mm Spindle cone: MK 6 Tailstock: Tailstock mount:MK 4 Tailstock quill stroke: 110mm Pitch: Pitch metric: 0.4 - 7mm/rev Number of leads metric: 32 Pitch inch: 56 - 4Gg/1" Number of pitches inch: 31 Travel distance: Top slide travel: 98mm Cgsboq T R Dmou Ufnwjt Travel distance face carriage: 185mm Bed slide travel: 850mm Feed rate: Feed range longitudinal:0.014 - 0.38mm/rev Number of longitudinal feeds: 26 Feed range flat: 0.052 - 1.392mm/rev Number of feeds flat: 32 Tool clamping: Tool holder Holder size: 16mm Electrical connection: Total connected load: 3.0kW

Condition: new, WORKING RANGE TURNING - swing diameter (max) 470 mm - turning diameter (max) 235 mm - worpiece length max. 1000 mm BED GAP / BRIDGE - swing in gap 690 mm MAIN SPINDLE - spindle bore diameter 58 mm - spindle revolutions (min) 20 /min - spindle revolutions (max) 2000 /min - number of gears 12 - spindle diameter 58 mm SCREW CUTTING SPINDLE - advance z-axis (min.) 0.05 mm/r - advance z-axis (max.) 0.82 mm/r - advance x-axis (min.) 0.02 mm/r - advance x-axis (max.) 0.4 mm/r TAILSTOCK - taper: MK 4 ELECTRICAL SPECIFICATIONS - total power consumption 5.5 kW DIMENSIONS / WEIGHTS - space requirements -left/right- 1900 mm - space requirements -front/back- 810 mm - total height 1220 mm - total weight approx. 1800 kg << Machine is in stock at 6500 Landeck / TIROL and can be viewed under power.>> The machine is available with peak widths from 760mm to 2000mm. This offer is a storage machine at a promotional price (Original price incl. These options: 28962.- ) We will send you a non-binding offer with your desired specifications. -> Description as well as standard and special equipment can be found in the PDF file. This storage machine is equipped as follows: Including the following standard accessories, u. a .: - 3-way precision spindle with SKF (FAG) bearings - Spindle brake mechanically - Complete electrical equipment - Coolant device with rear splash guard and splash guard on the slide - Food protection Cgebusfcqtco Ufnwot - Shift rod with 3 adjustable cams - Solid grain tip - Covered tension spindle - Set of machine mounting plates - Machine lamp 24 V - Operating instructions with test report - CE conformity declaration Incl. Special accessories, u. a .: Article no. 5200 B Steel holder head B, type Multifix (without tool holder) Article no. 6405 DA3A-470-1000 Digital Position Indicator ARBAH (Made in EU) 1 for SJ-470 / 1000S, including counter, 3 scales, Stands, covers and mounting Article no. 5300 3544-250-6 3 jaw lathe chucks BISON, steel body Ø 250 mm, Camlock D-6, concentric clamping, bore Ø 76 mm each with a set of one-piece turning and drilling jaws

Condition: new, Parallel lathe with display Fervi T075/400V3A. Monoblock cast iron base. Height of Centers 230 mm Max. diameter on Bench 460 mm Max. diameter on Carriage 270 mm Max. diameter on Slot 690 mm Tool Height 25 mm Distance between Centers 1500 mm Distance between Guides 300 mm Bar Taper CM MT7 Bar Passage 80 mm Spindle Attachment Camlock D1-8 Spindle Speed (12)25-1700 rpm Longitudinal Feeds (42) 0.031 - 1.7 mm/rev Cross Feeds (42) 0.014 - 0.784 mm/rev Metric Threads (41) 0.1 - 14 mm Inch Threads (60) 2 - 112 TPI Tailstock Spindle Stroke 130 mm Taper CM MT4 Motor 400 V 50 Hz 5.5 kW Coolant Pump 400 V 50 Hz 90W Machine Dimensions 2750 x 1080 x 1370 mm Net Weight 2020 kg Total Dimensions 2870 x 1180 x 1570 mm Gross Weight 2200 kg Accessories Included: 3-jaw self-centering chuck Ø250 mm / D1-8 4-jaw self-centering chuck Ø300 mm / D1-8 Drive flange Ø350 mm Fixed steady rest Moving steady rest Reduction bushing CM 7 / 4 Fixed tailstock CM 4 Rotary tailstock CM 4 Thread comparator Turret guard Spindle guard Rear splash guard Quick change turret type B LED lamp Csbevbqv Heu Ufnwegt Cooling system Electromechanical foot brake Bathed carriage gears oil Quick-lock tailstock carriage

Year of construction: 1975, Condition: like new (used), Horizontal lathe Diameter above the bed 370mm Distance between centers: 750mm Spindle bore (mm) 35 Diam. above the carriage (mm) 230 Spindle speeds 35 - 1000 (16x) Csbu Ufneg R Sm Iowsgt Motor power kW 2.2 Voltage (V) 380 Hertz (Hz) 50

Condition: good (used), Functionality: fully functional, spindle bore: 52 mm, turning length: 1,300 mm, Between centers: 1300 mm Turning diameter above bed: 570 mm Spindle passage: 52 mm Spindle speeds: 12 pieces, 12-1800 RPM Machine including: Cgsbu Ufou Uh Saenwjt 3 chuck Fixed and moving guards Quick change holder Cooling system Digital readout

Condition: reconditioned (used), Year of construction: 1982, The machine has been partially overhauled. Technical data: Center height: 215 mm Center width: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: 31.5 - 1400 1/min Tailstock holder: MK 4 Quill stroke: 150 mm Feed rates: Longitudinal slide: 0.06 - 0.8 mm/rev cross slide: 0.044 - 0.6 mm/rev Motor power: 4 kW Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2150 x 110 x 1750 mm Equipment: - 3-axis digital readout, Heidenhain brand - 3-jaw lathe chuck, Forkardt brand 200 mm - Emergency stop button Cjbustmtpks Ufnwjgt - Multifix quick-change holder system - Pull spindle cover - Lathe chuck guard with limit switch protection - Machine light - Coolant device The following work was carried out: - Machine partially disassembled - Damaged bearings replaced - Guides in X- and Z_0-axis ground - Tool holder of the tailstock quill ground - Wiper replaced - Partially replaced handwheels - Glass scales overhauled - Test report of the machine geometry created in accordance with DIN 8605

Condition: used, Year of construction: 2008, turning diameter over bed 420 mm turning diameter over slide rest 245 mm turning length 1000 mm turning diameter in the gap 600 mm turning speeds 45 - 1800 U/min centre height 210 mm spindle bore 52 mm total power requirement 3,5 KW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,1 x 0,8 x 1,6 m Cebu Ufevkya Hsnwjgt Lead and spindle lathe - Digital display - 3-jaw chuck 200mm - 4-way tool holder - Steady rest - Coolant system - Machine light - Chip tray - Foot brake

Condition: new, swing diameter: 400turning length: 1000speed range: 70 - 2.000 min¯¹weight approx.: 500 Cebsd Eauksu Ufnwjgt

Condition: good (used), Center distance 1150 mm turning diameter over bed 450 mm spindle passage 52 mm chuck 200 mm 3-jaw Taper in tailstock MK 4 quill diameter 58 mm speed 40-2200 rpm Cebu Ufeptak Ronwogt Coolant device power 4 KW dimensions LxWxH 2250x1040x1280 mm weight approx. 1,3 t quill stroke 155 mm

Condition: good (used), Technical data: Cgebu Ufnou Nac Aswst Center height: 450 mm Center width: 3000 mm Diameter over slide: 267 mm Spindle bore: 95 mm Speed: 8 - 800 rpm Tailstock taper: 5 Position indicator: NEWALL B60 Motor power: 7.5 kW Dimensions (length x width x height): approx. 6000 x 2000 x 1900 mm Weight: approx. 8 tons Accessories: 4-jaw chuck: ∅ 600 mm Many accessories The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to age; used machines are sold without any warranty.

Condition: new, Year of construction: 2024, turning diameter over cross slide: 690 mm, spindle bore: 155 mm, turning diameter: 1,090 mm, turning diameter over bed slide: 1,000 mm, center height: 500 mm, center width: 700 mm, turning length: 6,000 mm, bed width: 700 mm, rotational speed (max.): 1,000 rpm, Equipment: rotational speed infinitely variable, Heavy-duty lathe with infinitely variable speed control in 4 ranges. Digital position indicator / digital measuring device with constant cutting speed control - High motor power of the main drive 30 kW in standard version (applicable in the range from 5 - 1000 rpm) - Rigid main spindle with 132 mm bore - Bed width 700 mm - Prismatic guide, rigid cross slide Accuracy according to DIN 8607 - Rigid main spindle: TUS 800 /100/1250 with 155 mm spindle bore, mounted in precision bearings Manufacture: FAG or SKF Spindle holder according to DIN 55027/15 - Hardened guideways 48 +/-2 HRC - Locked chuck guard (max. TUS 800 = 760 mm, TUS 1000 = 960 mm, Cebu Ueugwrgjfnwogt TUS 1250 = 960 mm) Rear, continuous chip splash guard - Moving front chip guard - Jogging gear for main spindle - Closed feed box of rigid design with sliding wheel blocks on splined shafts - Central lubrication for bed slide and facing slide - Central lubrication for headstock and feed box - Feed rates, metric and inch threads without wheel change - Rapid traverse lengthwise, crosswise and in top support - Safety shutdown of the handwheel on the bed slide or the hand crank on the cross slide during rapid traverse movement - Feed direction change on the bed slide and also on the headstock - Quick-change tool holder model D1 Scale ring on the bed slide and tailstock handwheel - Scaling on the tailstock quill 2-stage tailstock quill/ with gear ratio 1:1 and 1:4 - Electrically adjustable tailstock Support for lead and feed spindles from 2000 mm SW - CE and declaration of conformity

Condition: reconditioned (used), Year of construction: 1981, The machine has been partially overhauled. Technical data: Center height: 215 mm Center width: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: 31.5 - 1400 1/min Feed rates: Longitudinal slide: 0.06 - 0.8 mm/rev cross slide: 0.044 - 0.6 mm/rev Tailstock holder: MK 4 Quill stroke: 120 mm Motor power: 4 kW Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2150 x 1100 x 1750 mm Cjbjtnc Saou Ufnwsgt Equipment: - 3-axis digital readout, Heidenhain brand - 3-jaw lathe chuck - Lathe chuck protection with limit switch protection - Multifix quick-change holder system - Pull spindle cover - Emergency stop button - Coolant device - Machine light The following work was carried out: - Machine partially dismantled - Damaged bearings replaced - Guides in X- and Z-axis ground - Tool holder of the tailstock quill ground - Wiper replaced - Partially replaced handwheels - Glass scales overhauled - Test report of the machine geometry created in accordance with DIN 8605

Condition: used, turning diameter over bed 420 mm turning diameter over slide rest 290 mm turning length 900 mm turning diameter in the gap mm turning speeds 40 - 2000 U/min Csbu Ufnovki Efewsgt centre height 210 mm spindle bore 38 mm total power requirement 4,0 KW weight of the machine ca. 0,9 t dimensions of the machine ca. 2,4 x 1,1 x 1,3 m Lead and feed spindle lathe - 3-jaw chuck 220mm - Quick-change tool holder with 5 cassettes - Steady rest - Chip tray - Operating instructions

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: fortlaufend, Height: 200 mm Centers: 1000 mm Turning diameter over bed: 400 mm Turning diameter over support 220 mm Spindle Bore: 52 mm Speed ​​range: 9-1600 rpm Spindle nose: Bayonet DIN 5027 KK 6 Longitudinal feeds range: 0.028 to 6.43 mm / rev (93 steps) Area cross feeds: 0.012 -2.73 mm / rev (93 steps) Metric threads: 0.5 - 224 (48 steps) Inch threads: 72 - 1 / 8 tpi (46 steps) Module pitch: 0.5 - 112 (42 steps) Diametral thread: 56 - 1 / 4 DP Cgebu Ufo Nh Hxsnwot Quill diameter: 75 mm Spindle stroke: 150 mm Taper: Morse taper 5 Motor power: 7.5 kW Weight: 2100 kg Dimensions: 2672 x 975 x 1230 mm Accessories: Digital display for 3-axis mark SINO, 3-jaw chuck Ø 250 mm, 4-jaw faceplate chuck Ø 400 mm, fixed + follow rest, coolant system, fire wall, rapid, manual lubrication, 4-way tool operating light.

Condition: new, Year of construction: 2024, Working range Center distance 1000 mm Turning diameter over bed 356 mm Rotation Ø over support 220 mm Bed width 206 mm Travel paths X-axis travel 178 mm Z1-axis travel 92 mm Swivel range top slide ± 50° Main spindle Speed range, high 550 1/min - 3000 1/min Speed range, low 30 1/min - 550 1/min Spindle holder Camlock D1-4 Spindle bore 38 mm Spindle cone 5 MK Feed rate Feed X-axis 0.014 mm/rev - 0.206 mm/rev Feed Z-axis 0.043 mm/rev - 0.653 mm/rev Thread cutting Thread cutting, metric (37) 0.4-7 mm Thread cutting Whitworth (28) 4-56 TPI Tailstock Tailstock pinol diameter 45 mm Tailstock taper 3 MK Tailstock quill stroke 120 mm Tailstock cross adjustment ± 10 mm Drive power Motor power main drive 4 kW Dimensions and weights Dimensions (length x width x height) 1.95 m x 0.75 m x 1.55 m Weight 880 kg Cebeu Sklyou Ufnwsgt

Condition: as good as new (ex-display), Functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 58 mm, turning diameter over bed slide: 470 mm, center height: 235 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,150 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,800 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Tip height: 235 mm Center distance: 1000 mm Spindle bore: 58 mm Csbusu T Hiuj Ufnwogt Spindle nose according to DIN 55029: Camlock D6 Motor power: 7.5 kW Spindle speed range: 20-2000 mm Features include infinitely variable speed control Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: reconditioned (used), Year of construction: 1986, The machine has been partially overhauled. Technical data: Center height: 215 mm Center width: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: 31.5 - 1400 1/min Tailstock holder: MK 4 Quill stroke: 150 mm Feed rates: Longitudinal slide: 0.06 - 0.8 mm/rev cross slide: 0.044 - 0.6 mm/rev Motor power: 4 kW Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2150 x 1100 x 1680 mm Equipment: - 3-axis digital readout, Heidenhain brand - 3-jaw lathe chuck, Forkardt brand 200 mm - Quick-change holder, Multifix system - Pull spindle cover - Lathe chuck guard with limit switch protection - Machine light - Coolant device Cebu Ufnjtnc Nyewsgt The following work was carried out: - Machine partially disassembled - Damaged bearings replaced - Guides in X- and Z_0-axis ground - Tool holder of the tailstock quill ground - Wiper replaced - Partially replaced handwheels - Glass scales overhauled - New work light - Test report of the machine geometry created in accordance with DIN 8605

Condition: used, turning diameter over bed 480 mm turning diameter over slide rest 280 mm turning length 1100 mm Cgobu Ueupxyrefnwet turning diameter in the gap 500 mm turning speeds 18 - 900 U/min centre height 240 mm spindle bore 52 mm total power requirement 7,5 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,7 x 1,5 x 1,7 m Lead and feed spindle lathe - Forkardt 3-jaw chuck F250mm - Multifix tool holder including 3 cassettes - Coolant system - Machine light - Chip protection wall - Chip tray - Centering point

Condition: like new (used), Year of construction: 2008, SPECIFICATION KB-45 Cutting capacity 455mm Maximum working height 255mm Table 600 x 500 mm Tilt 4 ways up to 15° Saw blade length 3490mm Saw blade width 3-16mm Csbju Rdr Rsu Ufnwsgt Saw blade speed 25-115m/min Butt welder capacity 3-16mm Motor size 1HP Weight 285 Kgs Height 2020mm Width 1100mm Depth 660mm STANDARD FEATURES Overload switch Single-phase / 3-phase supply Built-in saw blade and tire cleaning brush Saw blade welder, blade shear and grinder Slotting table Low-voltage halogen lamp Mitre guard for angled cuts Quick rip fence for straight cuts

Condition: new, turning diameter over bed 410 mm turning diameter over slide rest 240 mm turning length 1000 mm turning diameter in the gap 530 mm turning speeds 65 - 1810 U/min Cobu Usm Rlb Njfnwjgt centre height 205 mm spindle bore 52 mm tailstock quill taper MT 4 total power requirement 2,2 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 0,8 x 1,3 m Center lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions.