Used deephole boring machines for sale (83)

Condition: ready for operation (used), Year of construction: 1983, operating hours: 6,348 h, functionality: fully functional, drilling depth: 1,500 mm, travel distance X-axis: 1,250 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, drill diameter: 50 mm, The machine was overhauled in 2009! TECHNICAL DETAILS Drilling depth: 1,500 mm Drill diameter: 5 - 50 mm Travel X-axis: 1,250 mm Travel Y-axis: 900 mm Travel Z-axis: 900 mm Table length: 1,000 mm Table width: 1,000 mm Max. table load: 3,000 kg Spindle speed: 100 - 6,000 rpm Spindle taper: SK 40 MACHINE DETAILS Control: Siemens 802 D Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,600 x 2,000 mm Weight: 6,000 kg Operating hours: 6,348 h Laodpjx Ngxrsfx Agzok

Condition: repair required (used), Year of construction: 1996, For sale is an IXION TL 601 deep hole drilling machine. Unfortunately, the machine is experiencing electrical problems. Constants need to be reset by a technician, and the backup battery needs to be replaced. New LCD display was recently installed. New LED display. Machine No. 950192 Year of manufacture 1996 Manufacturer: Maschinenfabrik IXION Otto Hafner -Travel paths + Quill Tl 601 (Z) 600 mm + Vertical drilling unit (Y) 300 mm + Transverse table (Table surface 1200 mm x 600 mm) (X) 700 mm + In drilling direction (W) 1000 mm -Clamping table + Table surface (standard) 1200 mm x 600 mm + Table load (T1200) 1000 kg -Tool holder + SK 40 holder according to DIN + Pull stud 69871 According to DIN 69872 -AC main spindle drive 3.0 kW + At 100% duty cycle, S1 5.5 kW At 50% duty cycle, S6 7.5 kW +Spindle turning speed Directly programmable 100-4000 rpm Performance: +Drilling capacity in steel 2312 D 32 mm +Tapping M24 -Weight / Dimensions Weight 2500 kg Length approx. 4230 mm Width approx. 1885 mm Height approx. 1870 mm All prices plus VAT We can deliver and commission the machine. All prices plus VAT Machine Purchase / Sale Laedeh Dpv Rspfx Agzjk PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours?

Condition: good (used), Year of construction: 2003, Bench drill, stand drill, pillar drill, pillar drill Laedpfx Ask Tuwvjgzek -Manufacturer: Ixion, bench drill type BT13ST -Clamping table: 170 x 170 mm -Travel: 210 mm -Spindle holder: drill chuck B16 -Projection: 180 mm -Speeds: 420 - 2100 rpm stepless -Pillar: diameter 65 mm -Spindle stroke: 70 mm, with fine stop -Motor: AEG 0.7/1.0 kW -Voltage: 380V -Dimensions: 620/235/H800 mm -Weight: 70kg

Condition: good (used), Year of construction: 2017, functionality: fully functional, Technical details core drilling diameter max. 3 - 28 mm bore depth 1000 mm control Heidenhain TNC 640 x-axis 1000 mm y-axis 800 mm z-axis 800 mm spindle head - swivable (W) +15°/-30° deg B-axis (table) 360.000° deg table surface area 1000 x 1000 mm table load 5,0 t tool taper SK 40 spindle turning speed range 60 - 6000 U/min spindle motor 12 kW total power requirement 58 kW weight of the machine ca. 14 t dimensions of the machine ca. 6,35 x 4,75 x 3,80 m Additional information 5 axes Deep Drilling-Milling-Machine A current geometry measurement report is available. Equipped with: HEIDENHAIN TNC 640 control 5 CNC AXES X – Y – Z – W – B NC rotary table 360.000 deg. Milling performance 150 cm3/min. Direct linear position measuring system Digital AC drives Table design with Hirschmann zero-point clamping system NC-controlled tilting of the deep hole drilling/milling unit (W) +15/-30 deg. Automatic tool changer for 24 tools Internal coolant supply High-pressure coolant system 1200 liters for deep hole drilling oil up to 140 bar Paper belt filter system SIEMENS extinguishing system Fire protection system Spindle cooling Lasdex D U R Ajpfx Agzjk Oil temperature control 3D HEXAGON probe RENISHAW tool measurement Electronic handwheel OPT kinematics Chip conveyor Coolant pressure and flow control Collision and vibration monitoring Feed control Coolant gun MONTRONIX machine airbag Oil mist extraction 2 clamping plates Walk-in full enclosure with roof and opening for crane loading Included in delivery: Operating manual Documentation Machine parameters on USB stick

Condition: good (used), Year of construction: 2009, Deep Hole Drilling Machine Mollart MicroDrill VDM Workpiece diameter (center drilling): up to 10 mm with manual loading Laedpfox Eml Rjx Agzsk Eccentric drilling diameter: 2 to 300 mm with manual loading Materials: Steel and other metals except magnesium or its alloys Tool data – drilling diameter: 0.70 to 6.00 mm with 4 spindles, or 6.00 to 8.00 mm with 2 spindles Maximum drilling depth: 180 mm Number of main spindles: 4 Main spindle speed: 2,500 to 25,000 rpm or 600 to 7,500 rpm Main spindle power: 0.85 kW at 100% duty cycle Operating pressure of drilling oil pump: 0 to 40 bar Oil tank capacity: approx. 650 l Oil mist extraction capacity: approx. 430 m³/h Year of manufacture: 2009 Total machine power supply: 25 A The microdrill Mollart VDM is a high-precision deep hole drilling machine for ultra-fine drilling in steel and other metallic materials. Thanks to its four powerful main spindles, the machine enables drilling diameters starting from 0.70 mm and depths up to 300 mm, making it ideal for demanding micro-drilling applications. Spindle speeds of up to 25,000 rpm ensure excellent machining quality, while the integrated high-pressure drilling oil pump with up to 40 bar provides optimal lubrication and chip removal. The large 650-liter oil tank and high-performance oil mist extraction system ensure stable and clean operation. The machine is equipped with a Siemens SIMATIC control interface, which allows for precise and user-friendly operation. With its robust construction, high reliability, and extremely fine machining accuracy, the microdrill Mollart VDM is ideal for companies manufacturing precision components in the micro range. No guarantee is given for the correctness, completeness, or topicality of the information provided.

Condition: excellent (used), Year of construction: 2003, Deep Hole Drilling and Milling Machine TBFZ 1600 CNC Year of manufacture: 2003 Lodpfx Agoxz Aygszoak X-AXIS TRAVEL: 1600 MM Y-AXIS TRAVEL: 1200 MM Z-AXIS TRAVEL: 500 MM W-AXIS TRAVEL: 1200 MM B-AXIS TRAVEL: 360° (Rotary table) * Table size (LxW): 1500x1500 mm * T-slots: 5x DIN 650-22 h12, 150 mm spacing * Tool clamping: hydraulic * Electrical connection: 400 V, 50 Hz * Compressed air connection: rated flow rate 7000 l/min, operating pressure: 6 bar * Botek driller optionally available * Feed drive: brushless AC servo motors * Feed rate: 0-20000 mm/min * Rapid traverse: X 20000 mm/min, Y+Z 20000 mm/min * Manual mode: 20000 mm/min * Setup operation: 0-2000 mm/min

Condition: good (used), Year of construction: 2008, IXION TL 1001 CNC Deep Hole Drilling Machine with Equipment Lodpfex Hv D Eox Agzsak Year of manufacture: 2008 Control system: MITSUBISHI M530 Machine number: 950521 Drilling depth (Z), CNC controlled: 1,000 mm Drilling unit (Y), vertically traversable: 800 mm Table size: 1,200 mm x 700 mm Table load: 3,000 kg Table longitudinal travel (X): 1,000 mm Table displacement (W): 1,000 mm Table rotatable by 360° Spindle: SK 40 Spindle speed: 100 – 4,000 rpm Max. drilling capacity in steel: 25 mm Max. thread cutting in steel: M20 Milling in steel possible Weight: approx. 3,500 kg Equipment: Compact belt filter KBF Electronic handwheel Coolant system Chip conveyor KBF 270 P50 Included in delivery: Deep hole drilling tools Workplace with: Holders / mounting brackets / supports / sealing discs Operating manual/documentation Machine parameters on storage medium For equipment, technical data, installation & transport – see PDF. Image, content, and details are provided without guarantee and therefore not binding. All additional accessories visible in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery includes only the accessories explicitly listed here, in the order confirmation and invoice. FCA (Free Carrier, loaded on truck) D-04643 Geithain packaging only Lead time: immediately Subject to prior sale / Payment due immediately upon purchase

Condition: excellent (used), This machine was overhauled in 2025 and is therefore in like-new condition! Technical data: - Min. drilling diameter 16 mm - Max. drilling diameter 35 mm - counter boring 65 mm - Max. drilling depth 1,400 mm using BTA method Ljdpjwq I Iqsfx Agzeak - Required machine footprint approx. 6,100 x 3,100 mm - Max. machine height 2,400 mm - 2 separate drilling units, mounted on base machine bed, spindle distance 600 mm - Flat guideways - Feed drive via ball screw and feed gearbox - Rapid traverse speed 4,000 mm/min - Feed speed max. 230 mm/min - Drive power per drilling spindle: 11 kW (2 pieces) - Infinitely variable speed up to max. 6,000 rpm - Hydraulically attachable tailstock with counter run - Tailstock manually movable on base plate with T-slots - Enclosure with sliding doors - 1 steady rest each - 1 rotating clamping bell holder, basic holder each - 2 pre-centering devices each - Drilling depth control via cams and limit switches - CNC control SFT and FU, connection 380 V / Rated current 80 Amp. - Each unit has its own control and own feed motor With this machine you actually receive 2 single-spindle machines, as each spindle is operated separately with its own control and feed motor.

Condition: excellent (used), Year of construction: 2016, operating hours: 40,000 h, functionality: fully functional, Technical data: Laedpsxyarwsfx Agzjk 3 x drilling spindles Boring method: BTA Minimum drilling diameter: 18 mm Maximum drilling diameter: 30 mm Maximum drilling depth: 1800 mm Rotating tailstock, hydraulic with counter-rotation, stroke 45-50 mm Spindle distance: 210 mm Feed rate: 1-4000 mm/min Position display with 1-axis PLC deep hole drilling control and monitoring Gear motor with holding brake for counter-rotation of workpieces, 160 rpm Chip conveyor Oil trough with extraction pump

Condition: excellent (used), bore depth 500 mm spindle speed: 1 Laodpfoxx A D Tjx Agzjk

Condition: excellent (used), Drilling capacity -16mm MK2 Spindle taper Drilling depth max. 485mm table 590 x 350 mm, 360° turnable Lodsq Dlznepfx Agzoak Misc. Accessories Marcels Maschinen AG

Condition: excellent (used), Year of construction: 2007, • Maximum possible drilling depth: 1200 mm • Maximum hole diameter: 32 mm • Minimum drilling diameter: 6 mm • Longitudinal travel (X-axis) table: 1800 mm • Cross travel (Z-axis) column: 1700 mm • Cross travel (W-axis) drilling head: 1150 mm • Vertical travel (Y-axis) drilling head: 1200 mm • Clamping surface NC table: 1500 x 1000 mm • Maximum table load: 10 t • Rotary axis (B-axis) rotary table: 360° • Rotary axis (A-axis) drilling head: -25°/+15° • Feed rate: 1-15 m/min (Y-axis: 1-10 m/min) • Rapid traverse speed in all axes: 15 m/min (Y-axis: 10 m/min) • Maximum spindle speed: 6000 rpm • Minimum spindle speed: 60 rpm • Tool holder: SK 40 • Tool clamping: OTT • Rated power main drive (100% ED, S1/40% ED, S6): 9/13 kW • Coolant tank capacity: 1000 l • Maximum coolant pressure: 100 bar • Low-pressure external and high-pressure internal coolant supply • Power supply: 3x 400 V; 50 Hz • Required installation space (L x W x H): 6550 x 5350 x 4130 mm • Machine weight: 12,000 kg Deep Hole Drilling Machine Equipment • CNC control: HEIDENHAIN iTNC 530 • Interpolated rotary table with minimal backlash, dimensions 1500 x 1000 mm • Swiveling drilling head +15°/-25° • Shank drilling head • Handwheel HR520 Lsdexyf E Nopfx Agzeak • Fixed supports (2 units) • Tool magazine: ELB tools: 12 pcs (max. diameter: 32 mm / max. length: 1550 mm) Standard tools: 12 pcs (max. diameter: 140 mm / max. length: 400 mm) • Direct measurement and positioning system in X, Y, and Z axes • Collision monitoring system for supports and drill sleeves • Oil cooler • Coolant flow control system • Adjustable coolant nozzles • Cooling unit for electrical cabinet • Enclosed upper cover (roof) • Drip tray for machine and tank facility (tray height 30 mm) • Extraction system • Infrared touch probe • Drilling depth extension 1200 mm (retrofit) • Chip conveyor

Condition: good (used), Year of construction: 2004, NAGEL/TBT BW-30-3000 Deep Hole Drilling Machine Year of manufacture: 2004 Control: SIEMENS SINUMERIK 840D Drilling depth up to 3,000 mm Drilling diameter max. 27 mm / min. 16 mm Axes: 3 Max. feed: 140 mm/min Table X-axis: 950 mm Working area in X-axis: 900 mm Working area in Z-axis: 1,750 mm Coolant capacity: 2,400 l Table load capacity: 4,000 kg Cooling system type: KA-1 Table size: 3,300 mm x 950 mm Feed rate up to 7,000 mm/min Lsdpfx Agjx Hwhlszeak Power: N = 7.5 kW Speed: 650 – 6,500 rpm Automatic central lubrication Hydraulic drive for drill guide bush Magnetic chip conveyors All other accessories visible in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery includes only those accessories which are expressly listed here, in the order confirmation, and in the invoice. FCA (Free Carrier – Loaded on Truck) D-95447 Bayreuth Packaging only Delivery time: immediate Subject to prior sale / Payment due immediately upon conclusion of sale

Condition: refurbished (used), 2-spindle deep hole drilling machine under reconstruction Laodpfx Agjx E U S Ejzjk

Condition: like new (used), Ryazan Model PT295106 Deep Hole Borer x 4000mm Manufacturer Ryazan Model PT295106 Year 1985 Condition Used Laedpexzp Rlofx Agzsk Stock Number 2850 Centre Height 550mm Solid Boring Capacity 200mm Max Boring Length 4000mm Headstock Hollow spindle 500mm Headstock Spindle speeds 16-250 rpm Headstock drive 50/75kw Max boring length in front of headstock 3500mm Max boring length if using the 500mm hollow spindle 4000mm

Condition: reconditioned (used), -Drilling diameter 5~25 mm -Drilling depth 1500 mm -Tailstock -Tank -pump Lasdehuil Ropfx Agzok -Filter

Condition: repair required (used), Year of construction: 1991, functionality: limited functionality, machine/vehicle number: 950082, drilling depth: 1,000 mm, travel distance X-axis: 1,500 mm, type of input current: three-phase, This machine is equipped with a Bosch CC100 M control system and has a defect. All motors and the drive are in working condition. The machine can be used for retrofit or as a source of spare parts. Lsdpfxox Afbps Agzeak

Condition: excellent (used), Year of construction: 2012, operating hours: 79,000 h, functionality: fully functional, machine/vehicle number: 106648-11, Please provide your offer price. Sales only within Europe, including Turkey. Price excluding packaging; delivery condition: FCA (machine location). Available machines: 5 units, identical process. Year of manufacture: 2001 - 2012 ===== Lsdpfxoxzgrao Agzjak For technical data, please refer to the handout. All warranty rights are excluded. We do not guarantee the accuracy of the technical data and year of manufacture, the completeness of accessories and tooling, or compliance with all safety and environmental protection requirements specified in accident prevention regulations. No sale to private individuals.

Condition: excellent (used), Year of construction: 2018, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,800 mm, Table 1,500 x 1,500 mm X 2,000 mm Y 1,600 mm Z 1,800 mm B-axis, A-axis swiveling +/- 19 degrees Machine features full enclosure Chip conveyor and high-pressure coolant system Lsdpfjxyic Sjx Agzsak Tool holder SK 50 Control Heidenhain iTNC 640 Table load capacity 20 tons Spindle speeds up to 4,000 rpm Rapid traverse 20 m/min Tool changer with 40 stations

Condition: used, Year of construction: 1970, table width: 220 mm, total width: 700 mm, total length: 960 mm, total height: 1,400 mm, table length: 900 mm, rotational speed (min.): 320 rpm, rotational speed (max.): 1,600 rpm, overall weight: 300 kg, Article number MA1174 Manufacturer IXION Type BT15G Year of manufacture approx. 1970 Machine number 97963 Length [mm] 960 Width [mm] 700 Height [mm] 1400 Weight [kg] 300 Connection power 380 V Lodpjvutwmofx Agzsak Number of tool stations [pcs.] 3 Gearbox [rpm] 320- 1600 Table size [LxW] 900 X 220 Mounting MK 2 Left/right rotation Automatic threading of all 3 drilling units M3 - M10 ST 60. / M3 - M16 GG Accessories Drilling units Height adjustable

Condition: not inspected (used), Year of construction: 1970, - Drilling diameter 5-30 mm Lajdpfx Agoxzz Hjzek - Drilling depth 750 mm - Filter - Pump

Condition: used, Year of construction: 1970, machine/vehicle number: 100267, total length: 960 mm, total width: 700 mm, total height: 1,400 mm, overall weight: 300 kg, rotational speed (min.): 1,600 rpm, table length: 900 mm, table width: 220 mm, Article number MA1174 Manufacturer IXION Type BT15G Year of manufacture approx. 1970 Machine number 100267 Length [mm] 960 Width [mm] 700 Height [mm] 1400 Weight [kg] 300 Connection power 380 V Lodpsvutwaefx Agzjak Number of tool stations [pcs.] 3 Gearbox [rpm] 320- 1600 Table size [LxW] 900 X 220 Mounting MK 2 Left/right rotation Automatic threading of all 3 drilling units M3 - M10 ST 60. / M3 - M16 GG Accessories Drilling units Height adjustable

Condition: ready for operation (used), Drilling diameter 5 ~ 25 mm Drilling depth 1000 mm Headstock Tank pump Filter Laedpfxjdgplto Agzok

Condition: good (used), Year of construction: 1979, TBT T30-4-750/1000 -drilling diameter ~30 -drilling depth 750/extension ~1000 -Tank -Pumps -loading equipment -Tailstock Ljdpfx Agjd Ri H Ejzeak

Condition: good (used), -Drill through fair 5-30 mm - depth 750 ~ 900 mm - conversion to customer specification Lajdpo Dcz Djfx Agzok