Used double cross cut saws for sale (43)

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure Bjdpsq Ii Dljfx Aaqeww The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, OMGA V 235 - precise cutting from the program, Bjdow Tc Hropfx Aaqsww - with a controlled ruler, (with a stop) - 3.7Kw, 350mm sheet size.

Condition: used, Rema type DMGB-35 double cross-cut saw including discharge conveyor belt for cutting wood to length on both sides. This machine was used specifically to cut doors to size. In its current state, the cutting length is limited to 1,000 mm, but can be extended. tape length: approx. 1,700 mm + 2,700 mm cutting width: max. 2,500 mm Bwjdpfev Hgb Njx Aaqsw cutting height: max. approx. 80 mm

Condition: excellent (used), Year of construction: 1993, functionality: limited functionality, machine/vehicle number: 6145, cutting height (max.): 75 mm, cutting width (max.): 200 mm, cutting length (max.): 6,000 mm, saw blade diameter: 450 mm, type of input current: three-phase, cross cutting line with infeed opticut and 6 automatical packing/stacking units , partly renovated ( more details by contacting ) Bwedpew I Dpqefx Aaqjw

Condition: as good as new (ex-display), Year of construction: 2018, The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle point to point head. Programming is quick and simple thanks to the integrated colour graphic touch screen controller. The saw and drilling units are both located in an enclosed safety cabin with electrically interlocked doors, this giving the operator the highest level of protection. The machine is ideal for cutting and drilling for sofa / chair frame rails / parts, general furniture parts, plastics and / or aluminium extrusions. Specification - Heavy duty thick steel monobloc frame electro welded. - Automatic vertical loading system with length capacity upto 1350mm (longer on request). - Feeding via self centering grippers. - Special grippers to allow loading of / feeding of 2 pieces together (on top of each other). - Automatic step advancement movements of the material to be drilled / cut controlled by the NC on the X axis. Programmable movement from 1 to 1050mm, advancement speed max 60 mt/min (adjustable). Special 'macro' for back movement of the piece for material saving. - Outfeed motorised exit conveyor belt for cut / drilled parts 600mm long x 75mm wide. - Saw unit with 4kw motor/ 2800mm adjustable through inverter up to 4000 rpm. Automatic rotation of the sawblade +/- 60 degrees controlled by the CN. - 5 spindle in line vertical point to point drilling unit controlled on 3 axis by CN. - Easy programming with dedicated software with 12" screen an operator interface - Total protection of the the working cabin, interlocked doors with inspection windows. - In conformity with CE safety rules. Working dimensions - Length feeding in one operation 1 to 1000mm (can be increased by setting more positioning steps of the loader. - Width 10 to 200mm cutting at 90 degrees. - Width 10 to 150mm cutting at 34 degrees. - Thickness 10 to 80mm. - Productivity approx 3 seconds per operation (feeding, drilling, cutting = 9 seconds) Complete with optional Bwsdsv Aalyjpfx Aaqew Vertical hopper feed loader with 3m length capacity Year - 2018 CE Condition - As new ex display [ only used for demonstrations.]

Condition: excellent (used), functionality: fully functional, OMS double mitre saw for wood and aluminium Specification: • Condition – used, after inspection • Manufacturer – OMS • Main motors – 2 x 2.5 HP • Pneumatic head control • Max cutting length – 351 cm • Min cutting length – 34 cm • Max cutting cross-section – 110x150 mm (at right angle) • Max blade diameter – 300 mm • Extraction ports, diameter 60 mm • Mitre cutting from -45 to +45 degrees (right, left) • Vertical workpiece clamps • Weight – approx. 800 kg • Overall dimensions – 412 x 85 x 130 cm (L x W x H) Additional information: • Very good original technical condition • The attached photos show the actual condition of the machine • Possibility to connect and inspect the device on site Bwjdpsw Htxtofx Aaqsw

Year of construction: 1983, condition: good (used), RÜCO double crosscut saw Type 22 Year of manufacture 1983 S/N 10860 Working range : cutting size 2600 x 2200mm smallest cutting width 210mm cutting height 100mm with saw blade Ø 450 = 125mm Technical data: Bsdpsin E Rqsfx Aaqoww Saw blades each 45° tiltable 2 X main motor 4,0 KW, saw blade Ø 400 mm 2 X scorer 0,56 KW, saw blade Ø 140 mm Weight 1400 Kg space requirement approx. 4400 x 4000 H 1000 mm Transport dimensions approx. 4400 x 1300 H 1300 mm technical data under reserve

Condition: excellent (used), functionality: fully functional, AUTOMATIC DOUBLE MITRE SAW model OMS SALVARANI INVINCIBILE OK 330 second hand machine working conditions : very good Bedpfowqdqnox Aaqeww for cutting wood, frames, pvc, aluminium, plastics and various materials oil pneumatic downstroke of the blade groups inclination of cutting blade groups + / - 45° n.02 motors . power Hp 3 each one blades diam. mm. 330 max. useful cutting length mm.3500 min. useful cutting length mm.350 max. useful cutting width 90° mm. 165 x 115 H max. useful cutting width 45° mm. 115 x 115 H volt. 380/50 weigth kgs. 700 volt. 380/50

Condition: used, Double cross-cut saw / format saw Rüco 21 for cutting, trimming and shortening wood or panels. saw: 3 cutting width: max. approx.: 2,050 mm Depth of cut: max. approx.: 2,200 mm Bodpfx Ajlfdx Ujaqsww Cutting depth: max. approx.: 2,200 mm cutting height: max. approx. 100 mm More technical data: see PDF Further technical data: see PDF

Condition: used, Year of construction: 1993, with electronic width adjustment Scoring unit Used, good condition Make: Hüllhorst Type: DH 53 Year of manufacture: 1993 Machine no. 4176 Saw units: 2 units Motors: 2 x 3 kW Cutting width: 2100 mm Cutting depth: 2000 mm Cutting height: 90 mm Bwjdpfx Aewbi Elsaqew Max. blade diameter: 350 mm Scoring units: 2 motors: 1.1 and 1.7 kW Automatic lowering during return travel Electric width adjustment - via electronic control Automatic Clamping width adjustment Removal device Digital display for cutting width Space requirement approx. 3500 mm x 3000 mm x 1100 mm Weight approx. 1500 kg Total connected load approx. 8.2 - 9.4 kW Storage location: 97447 Gerolzhofen, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Year of construction: 1990, condition: excellent (used), Double cut-off saw STRIFFLER Bodpfx Aaoibyknsqoww Cutting length 2,2 m

Condition: new, Year of construction: 2025, DOUBLE CROSS CUTTING MACHINE ANGOMAC Double cross-cutting machine, ideal as line machine, for pallet elements production. cutting lenght from 650 to 6500 mm Bjdpfx Aasfclpfoqjww max thickenss 200 mm

Condition: excellent (used), functionality: fully functional, maximum spacing of aggregates 3.3m two motors 2,2kW each Bwodjvby T Ujpfx Aaqjw inclination of discs adjustment of the cutting angle within -45/+45 degrees maximum diameter of discs 330mm pneumatic clamps disc rotation speed 3765 rpm CE marking

Condition: good (used), Year of construction: 1997, I sell the double mitre saw BAUERLE DS-II. Cutting length 230 - 1500mm Cutting width max. 1500mm Cutting height max. 145mm 2 2 Vertical pneumatic Material pressures 2 Motors x 4,0kW (5,5 HP) Good condition. Available immediately. Bodpfx Aaswif T Uoqeww

Condition: good (used), Year of construction: 2000, I sell the double mitre saw OMGA TR2A. Cutting length 390 - 3000mm Cutting width max. 170mm Cutting height max. 90mm Tilting heads 0 + - 45° Bwjdpfxjtwbcye Aaqsw 2 Horizontal + 2 Vertical pneumatic Material pressures 2 Motors x 1,62kW (2,2 HP) Good condition. Available immediately.

Year of construction: 1977, condition: refurbished (used), I sell the double mitre saw Rapid DGS, year 1977. Tilting heads Bwsdpfx Asd N Rb Doaqsw Drilling front heads on each side included Very good condition. Available immediately.

Year of construction: 2005, condition: good (used), I sell the double mitre saw OMGA TRF 527, year 2005. Cutting length 390 - 2800mm Cutting width max. 170mm Cutting height max. 90mm Tilting heads 0 + - 45° 2 Horizontal + 2 Vertical pneumatic Material pressures Bwjdpfxog Tumce Aaqow 2 Motors x 1,62kW (2,2 HP) Good condition. Available immediately.

Condition: like new (used), Year of construction: 2012, I sell the wooden window assembly table OMGA BA825 (+A+U). Bodst Ndz Ujpfx Aaqjww Year 2012 All complete. Very good condition. Available immediately.